809313
6
Verklein
Vergroot
Pagina terug
1/12
Pagina verder
Operating the appliance
6720814333 (2018/04)6
4 Operating the appliance
Fig. 5 Control panel
[1] On/off switch
[2] Reset key
[3] Chimney sweep key
[4] Help key
[5] Display
[6] Menu key
[7] Down key
[8] Up key
[9] Diagnostic plug
[10] Burner LED
The front of the boiler contains a control panel with the following
elements:
On/off switch
The boiler can be switched on or off via the on/off switch. The power
supply is not interrupted.
Reset c key
The boiler can be restarted via the c key in the event of blocking faults
( Chapter 7 “Display information”).
Chimney sweep d key
The boiler can be brought into operation via the d key in order to carry
out measurements. Used for servicing.
Info L key
The boiler status can be read out via the L key.
Display
Display values, settings and codes can be read off the display. If the
boiler is switched on via the mains isolator, all symbols appear briefly in
the display.
Menu O key
To change the settings, open the menu via the O key.
Down N and up M keys
You can navigate the various menus via the arrow keys. Press an arrow
key to change a setting or value.
Diagnostic plug
An external diagnostic tool can be connected here.
Burner LED
The Burner LED lights up when the burner is firing.
4.1 Information menu
Information on the status of the boiler can be read out via the information
menu. Proceed as follows:
Press L to open the information menu.
Navigate the menu with M and N keys in order to read out the
required data.
Press L to exit the information menu.
Status display
Display when the boiler is switched on (approx. 1 second)
20.0 Current flow temperature [°C]
p2.0 Operating pressure [bar]
(display flashes if the operating
pressure is too low)
CChimney sweep mode (service
operation)
BBurner in operation
RCentral heating
SDHW
IPump running
TOutside temperature display
An interlocking fault has occurred or
the boiler requires a service.
Table 3 Readings on the display
6720813419-4.1TD
1 3 5 104 986 72
After a few minutes of inactivity, the menu closes
automatically and the home screen is displayed.
Information menu
“info” is displayed for 1 second.
Maximum boiler flow temperature set [°C]
during heating mode and chimney sweep
mode.
“OFF” appears in the display when heating
mode is switched off.
No information about DHW mode is shown
here.
Display of service code.
This information is only displayed if the boiler
requires a service intervention.
For a comprehensive overview of the display
codes and corresponding explanations see
Chapter 7.
Displays an operating code or fault code.
For a comprehensive overview of the display
codes and corresponding explanations see
Chapter 7.
Current operating pressure [bar].
Current boiler flow temperature [ºC].
Outside temperature [ºC].
Only displayed with weather-compensated
control.
Calculated boiler flow temperature (setpoint)
[ºC] during heating mode R.
Table 4 Information menu
6

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Worcester-Bosch GB162 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Worcester-Bosch GB162 in de taal/talen: Engels als bijlage per email.

De handleiding is 2.01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info