~ 81 ~
20. Take the left door block (23) from the plastic bag and install it on the bottom
left side of the appliance door accordingly.
21. Take the top left door hinge (24) and the top left door hinge cover (25) from
the plastic bag.
22. Install the appliance door on the bottom door hinge. For this purpose, insert the
hinge axle of the bottom door hinge into the bottom hinge opening of the
appliance door carefully. Hold the door in position.
23. Align the top left door hinge (24) with the prepared holes on the left side of the
appliance; s. fig. below. While doing so, insert the hinge axle of the top door hinge
into the top hinge opening of the appliance door. Screw the hinge tightly.
24. Meanwhile, hold the door of the appliance with your hand so it cannot drop
down.
25. Ensure that the door of the appliance is fixed safely and properly by the hinges.
NOTICE! Adjust the door properly before you finally tighten the screws of
the hinge. The seal must close properly.
26. Connect the signal wire terminals 11 and 6; s. fig. below, see also fig. b) and c)
above.
27. Connect the signal wire terminal 12 to the door switch 8a; s. fig. below, see also
fig. b) and c) above.
28. Now you can screw the top door hinge cover (25) tight.
