These minimum distances may be less, but to do so can increase the power
consumption of the appliance.
3.3 Levelling
➢ Use the adjustable feet for proper levelling and for proper air circulation in the
lower sectors of the appliance. Adjust the feet using a suitable spanner.
❖ The figure above is an example only. Modifications are possible.
➢ You can adjust an inclination of 0.5
0
to allow the doors to close by themselves.
➢ If you have to move the appliance, set the adjustable feet to minimum position
so the appliance can be moved on its rollers (depending on model) easily.
Readjust the appliance when transport has been completed.
NOTICE! The rollers (depending on model) are no castors and intended
to move the appliance forward and backwards only. Lateral movements
can damage your floor and the rollers.
3.4 Flipper clapboard (depending on model)
1. Ensure that the flipper clapboard
is in proper position; otherwise the door
cannot be closed properly.
2. It is normal that the clapboard becomes hot as it is equipped with an integrated
heating element for dewing protection.
