This function starts cooking at a certain point of time with a certain duration. Put
the food into the oven. Set the oven function and temperature.
1. Press MODE until you see Dur on the display. Use the + and - buttons to set the
duration of the cooking time. Press MODE to confirm. The time of the day and
the symbols A are indicated on the display.
2. Press MODE until you see End on the display. Use the + and - buttons to set the
end of the cooking time. Press MODE to confirm. The time of the day and the
symbols A are indicated on the display. The symbol is off until the cooking
time begins.
You can set a period of time of 23:59 hours after the point of time you obtain
when adding the cooking time to the time of the day.
The appliance starts operating at the point of time you obtain when subtracting the
cooking time from the set end of the cooking time. The appliance stops operating
when reaching the set end of the cooking time. An acoustical signal sounds and the
symbol A flashes. Set the oven function and temperature to 0. You can cancel the
acoustical signal by pressing any button for less than 3 seconds. Press MODE for
more than 3 seconds and the appliance changes to manual mode.
➢ When you have programmed this function, you cannot change one of the time-
factors. You must cancel the programme and change to the relevant mode to
change a time -factor. If you want to alternate your programming you have to
change the setting of the current mode for re-programming according to the
steps named above.
1. You can increase/decrease the numerical values in 5-seconds-steps by pressing
the + and - button for more than 3 seconds.
2. If you have not pressed any button for 5 minutes when setting a timer function
the appliance changes to manual mode.
3. If you press MODE for more than 3 seconds when setting a timer function the
current setting is canceled and the appliance changes to manual mode.
4. If you press MODE and + for more than 3 seconds when setting a timer
function an acoustical signal sounds. The current setting is canceled and the
appliance changes to stand-by mode.
