1.2 Safety instructions
DANGER!
To reduce the risk of electrocution:
1. Non-compliance of the orders of this instruction manual will endanger
the life and health of the operator and/or can result in damages to the
appliance.
2. Do not operate the appliance when it does not work properly, is
visibly damaged, has dropped down or the power cord/plug are
damaged.
3. The power cord must be replaced by a qualified professional only.
4. Never repair the appliance yourself. Repairs carried out by
unauthorized persons can cause serious damage. If the appliance
does not operate properly, please contact the shop you purchased
the appliance at. Original spare parts should be used only.
5. Do not operate any room-air dependent fireplaces while operating
the appliance; otherwise harmful gases will get from the fireplace into
your home. Whenever the hood is operated together with
chimney-vented fireplaces (e.g. coal furnace), ensure there is
sufficient air supply in the room where the appliance is installed in.
Always consult your local chimney-sweep master. When you operate
the appliance in recirculating mode, you can simultaneously run
room-air dependent fireplaces.
6. If gas is set free in your home:
a) Open all windows.
b) Do not unplug the appliance and do not use the control panel.
c) Do not touch the appliance until the gas has gone.
d) Otherwise sparks can be generated which will ignite the gas.
7. Never pull the power supply cable to unplug the appliance. Always
use the power plug itself to unplug the appliance. RISK OF
ELECTRIC SHOCK!