638065
98
Verklein
Vergroot
Pagina terug
1/140
Pagina verder


Be sure not to pull out the seat post too far the mark on the seat post
(max., min., stop or the like) should always remain within the seat tube 
and to grease the surface of an aluminium or titanium seat post that is
inserted into a seat tube made of aluminium, titanium or steel. Do not grease
carbon seat posts and/or carbon seat tubes in the clamping area! Use spe-
cial XLC assembly paste instead .
Do not use brute force, if the seat post does not move easily
inside the seat tube or if it cannot be tightened sufficiently, ask
your bicycle dealer for advice!
The minimum insertion depths marked on seat post and frame
may differ. Be sure to insert the seat post to the deepest inser-
tion depth.
Align the saddle with the frame by using the saddle nose and the bottom
bracket or top tube as a reference point.
Clamp the seat post tight again by closing the quick-release , as de-
scribed in chapter  or by
turning the seat post binder bolts clockwise in half turns. You should not
need much strength in your hands to clamp the seat post sufficiently tight.
Otherwise the seat post does not match the frame.
Verify in between that the seat clamp is sufficiently tight by taking hold of the
saddle at both ends and then trying to rotate the seat post inside the seat
tube . If it does rotate, gently retighten the clamping bolt by half a turn
and do the check again.
Never apply grease or oil into a seat tube of a frame made of
carbon, unless an aluminium sleeve is inside the frame. If you
mount a carbon seat post, do not put any grease on it, even if
the frame is made of metal. Once greased, carbon parts may
never again ensure reliable clamping.
Tighten carefully by approaching the prescribed maximum
torque in small steps (0.5 Nm increments) whilst constantly
checking the proper fit of the component. Never exceed the
maximum tightening torque indicated by the manufacturer!
Do not overtighten the binder bolt of the seat post clamp. Oth-
erwise the seat post or the frame can be damaged. Risk of an
accident!
Does the leg stretch test now produce the right result? Check by moving
your foot and pedal to the lowest point. When the ball of your foot is exactly
above the pedal centre in the ideal pedalling position, your knee should be
slightly bent. If it is, you have adjusted the saddle height correctly. Check
whether you can touch the ground safely while sitting on the saddle by
stretching your feet to the floor. If you cannot, you should lower the saddle
a little, at least to begin with.
a
b
c
d
Never ride your bicycle with the seat post drawn out beyond
the limit, maximum, or stop mark! The seat post might break or
cause severe damage to the frame. If your bicycle has a long
seat tube continuing beyond the top tube, the seat post should
at least reach below the level of the top tube and the tip of the
rear stays!
If sitting on the saddle causes you trouble, e.g. because it
numbs your crotch, this may be due to the saddle. Your bicycle
dealer has a very wide range of saddles available and can offer
advice on position .
With full-suspension mountain bikes the seat post should not
project from the seat tube at lowest saddle height, as other-
wise the rear shock arm may collide with the seat post during
compression.

Integrated seat posts have to be shortened to adjust them to the individual
needs of the cyclist. The seat post clamping itself provides only limited verti-
cal adjustment.
Shortening the seat post is a very delicate job, best left to your
bicycle dealer! An improperly shortened seat post may result in
damage to the seat post! Risk of an accident!
In case you nevertheless want to shorten the integrated seat post by your-
self, you need special tools!
Determine the desired saddle height . Keep in mind that another saddle
or pedal model may have a significant influence on the length of the seat
tube!
Please note that shortening the seat post is an irreversible ad-
justment. Therefore, ask your bicycle dealer to do this job.
Use a marker pen to indicate the length you want to shorten. Slide an ap-
propriate saw capture on the seat tube until the line of the marker is visible
in the saw capture slot.
Use a saw with a metal cut saw blade. To avoid any damage to
the carbon tube, be sure to use a 24 teeth per inch saw blade.
Saw the tube, remove the saw capture and deburr the cutting edges with
sandpaper.
Mount the saddle clamp and slide it as deep as possible . Finish by fixing
the saddle with a torque wrench according to the indications on the compo-
nent and/or in the enclosed manual. The usage of XLC-mounting paste 
will help you to avoid overtightening.
a
b
c
d
98

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Winora Algemene bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Winora Algemene in de taal/talen: Engels als bijlage per email.

De handleiding is 4,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Winora Algemene

Winora Algemene Gebruiksaanwijzing - Deutsch - 144 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info