774433
75
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
11
English
8
/
Press this button to operate the on/off for the healthy and scavenging functions in operating status. Press this button for the
first time to start the scavenging function; the LCD will display ”
/
”. Press this button a second time to start the healthy and
scavenging functions simultaneously; the LCD will display“
/
” and “
/
”. Press this button a third time to exit the healthy and
scavenging functions simultaneously. Press this button a fourth time to start the healthy function; the LCD will display “
/
”.
Press this button again to repeat the operations above.
9 SLEEP
Press this button to select Sleep 1 ( 1), Sleep 2 ( 2),Sleep 3 ( 3) or to cancel Sleep. Scroll between these selections after
the unit is powered on. Sleep Cancel is the default value.
Sleep 1 is Sleep mode 1 in Cool, Dehumidify modes. The sleep status after running for one hour: the main unit
temperature setting will increase by 1 °C; after two hours: the temperature setting will increase by 2 °C and the unit will
continue to run at this temperature setting. In Heat mode, the sleep status after running for one hour: the temperature
setting will decrease by 1 °C; after two hours: the temperature setting will decrease by 2 °C and the unit will continue to run
at this temperature setting.
Sleep 2 is Sleep mode 2, where the air conditioner will run according to a preset group of temperature settings along a
sleep temperature curve.
Sleep 3, which is a Sleep mode containing DIY sleep curve settings:
(1) In Sleep 3 mode, press and hold the ”Turbo” button. The remote control will enter individual sleep setting status and
will display "1 hour". The temperature setting field ("88") will display the corresponding temperature of the last setting
in the sleep curve and flash. (The first entry will display in accordance with the initial sleep curve setting value from the
factory);
(2) To adjust, use the ”+” and ”-” buttons to change the corresponding temperature setting. After adjustment is complete,
press the "Turbo" button again to confirm;
(3) At this point the timer position on the remote control will automatically advance by 1 hour, i.e., to "2 hours", "3 hours",
"8 hours", etc., The temperature setting field ("88") will display the corresponding temperature of the last setting in the
sleep curve and flash;
(4) Repeat steps (2) - (3) above until 8 hours of temperature settings have been input. The sleep curve set up is now
finished. At this point the remote control will revert to the original timer display and the temperature display will return to
the original temperature setting. The Sleep 3 DIY sleep curve set up can be reviewed:
The user can use the sleep curve setting method to review the preset sleep curve. Enter individual sleep setting status
but do not change the temperature. Press the "Turbo" button directly to confirm. Note: In this presetting/review method,
if no button is pressed continuously within 10 seconds, the sleep curve setting status will automatically exit and revert to
the original display. Similarly, if the "ON/OFF", "Mode", "Timer" or "Sleep" buttons are pressed, the sleep curve setting/
review status will also exit.
10 TEMP
Use this button to select display of the indoor temperature setting or the indoor ambient temperature. When the indoor unit is
first powered on, it will display the temperature setting. If the temperature display status is changed from another status to
/
”, it will display the ambient temperature. If within 5 seconds or 5 seconds later, the unit receives another remote control
signal, this will return the display to the temperature setting. If the user has not set up the temperature display status, the unit
will display the temperature setting.
11 QUIET
Use this button for Quiet status, which is available in Auto Quiet mode (display ” ” and ”Auto” signal), Quiet mode (display
” signal) and Quiet OFF (no signal for ” ” is displayed). After powering on, the unit defaults to Quiet OFF. Note: the Quiet
function cannot be set up in Fan and Dry mode; in Quiet mode (Display ” ” signal), the fan speed is not available.
12 CLOCK
Press the CLOCK button and will flash. Within 5 seconds press the + or - button to adjust the present time. Holding down
either button for more than 2 seconds will increase or decrease the time by 1 minute every 0.5 seconds and then by 10 minutes
every 0.5 seconds. While the display is flashing after setting, press the CLOCK button again to confirm the setting and then
will constantly display.
75

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Wilfa Trysil Floor Comfort bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Wilfa Trysil Floor Comfort in de taal/talen: Engels, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 20.25 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info