727498
13
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
Congratulations on your new Whynter product. To ensure proper operation, please read this Instruction Manual carefully before
using this product. Keep this manual in a safe place for future reference.
Model # : ARC-122DS
INSTRUCTION MANUAL
WHYNTER ELITE 12,000 BTU DUAL HOSE DIGITAL PORTABLE
AIR CONDITIONER
2
TABLE OF CONTENTS
PAGE
DISPOSAL INFORMATION
3
SAFETY PRECAUTIONS
4
INTRODUCTION / TECHNICAL DATA
5
PARTS IDENTIFICATION
6 - 7
CONTROL PANEL
8
INSTALLATION
9 - 10
OPERATION INSTRUCTIONS
11 - 12
REMOTE CONTROL
13
CARE AND MAINTENANCE
14
TROUBLESHOOTING
15 - 16
WARRANTY INFORMATION
17
3
DISPOSAL INFORMATION
This symbol on the product or its packaging indicates that the appliance cannot be treated as nor-
mal domestic trash, but must be handed in at a collection point for recycling electric and electronic
appliances. Your contribution to the correct disposal of this product protects the environment. Fur-
ther information about the recycling of this product can be obtained from your local municipal au-
thority.
Thank you for choosing the Whynter 12,000 BTU Dual Hose Digital Portable Air Conditioner.
Please follow the instructions provided in this user guide to obtain the very best performance from
your portable air conditioner and take full advantage of the many features your portable air condi-
tioner offers you. We trust that your Whynter air conditioner will provide the performance and relia-
bility that we stand for.
Please keep this user manual in a safe place for future reference.
4
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRICAL SHOCK, OR INJURY
WHEN USING YOUR AIR CONDIITIONER, FOLLOW THESE BASIC
PRECAUTIONS:
Before the appliance is used, it must be properly positioned and installed as detailed in this manual.
Do not under any circumstances cut or remove the third (ground) prong from the power cord
Make sure this unit is connected to a correctly grounded power supply outlet. Do not use an extension cord or
power strip
The power cord is UL listed. It has a built-in L.C.D.I. (leakage, current, detection, interruption) circuit breaker
for added safety. If the power supply is interrupted, press the reset button to reconnect the unit to power
source
It is recommended to use a separate circuit that its size should be 15 Amps for the air conditioner
Do not use an excessively wet cloth, industrial solvents, oil-based products to clean this portable air condition-
er
To avoid the risk of shock, the product should never be used in bathrooms, shower rooms, or in any other
steamy or wet areas
Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other applianc-
es
Do not repair, disassemble and/or modify the unit by yourself
Always turn off the portable air conditioner when cleaning the air filter, and transporting
Do not turn this unit on and off by plugging and unplugging. Always use the ON/OFF switch
Transport the unit in an upright position only, or leave it in an upright position for a minimum of 4 hours before
first use.
Ensure curtains or other objects are not obstructing the air inlet filters
Do not bend or crush the exhaust hose while in use
Always allow at least 20” of clearance around the unit for ventilation. Do not use this unit inside closets, cabi-
nets and/or cramped spaces between furniture
This unit is optimized to operate in an ambient temperature of 64°F 90°F
This unit must be installed in an area protected from the element, such as wind, rain, water spray or drips
The unit should not be located next to ovens, grills or other sources of high heat
Always place the unit on even and hard and level surface
Do not sit or place objects on the unit
Do not allow children to climb, stand or hang on the appliance. The air conditioner could tip over and get dam-
aged and/or seriously injure somebody
Keep fingers out of the air intakes and air outlets
The appliance is an electrical appliance. To avoid injury from electrical shock do not operate it with wet hands,
while standing on a wet surface or while standing in water. Do not use it in outdoors or in wet condi-tions
When positioning or moving the appliance, ensure it is not turned upside down or greater than 45° or more off
level
This appliance is designed for household, non-commercial use only. Any other use will void the warranty
Do not plug into the power outlet before set up is completed
Do not operate this unit without the air filter(s)
Do not use harsh chemicals to clean the filter(s). Dry thoroughly before inserting the filter(s) into the unit
Do not add extra length to the exhaust hose by more than a total length of 9’. This will reduce the cooling effi-
ciency of the portable air conditioner
At the end of each season, all water must be drained from the unit and filter(s) must be cleaned before stor-
age
SAFETY PRECAUTIONS
THE MANUFACTURER DISCLAIMS ANY RESPONSIBILITY IF THE ABOVE INSTRUCTIONS ARE NOT FOLLOWED.
5
INTRODUCTION / TECHNICAL DATA
HOW IT WORKS
The Whynter compact CFC-free, lead-free, and energy efficient 12,000 BTU portable air condi-
tioner, helps you stay cool while working with better environmental standards and reducing ener-
gy consumption.
This high output portable air conditioner, specially designed to be mobile, can be easily setup in
almost any indoor location and is most commonly used in data closets / server rooms, bedrooms,
classrooms and garages / workshops.
This Whynter ARC-122DS portable air conditioner features an ECO-FRIENDLY CFC-free
GREEN R-410A refrigerant and lead-free RoHS compliant components.
Operationally, a dual hose portable air conditioner has two main advantages over a single hose
unit. A dual hose portable air conditioner will cool a room faster and will help minimize negative
air pressure situation in the room. If the outside temperature is much higher or more humid than
the room, the intake hose can be detached and the unit will l function as a single hose unit.
TECHNICAL DATA
Model: ARC-122DS
Operational Modes: Cool, Fan or Dehumidifier
Cooling Capacity: 12000 BTU
Dehumidifying Capacity: 76 Pts / day
Fan Speed: 3 Fan Speeds
Filters: Carbon air filter and washable pre-filter
Thermostat Control Range: 61° - 89°F
Timer: 24 hour programmable timer
Noise Level: < 52 dBA
Refrigerant: R-410A
Air Flow (at high speed): 264 m
3
/h / 155 CFM
Maximum Power Consumption: 1000W / 9.0A
Power Supply: 115 V / 60Hz
EER: 12
Unit Dimensions: 17" W x 16" D x 29.5" H
Package Dimensions: 19" W x 18" D x 34.5" H
Net Weight: 60 lbs
Gross Weight: 75 lbs
6
PARTS IDENTIFICATION
Handle
Control Panel
Front Air Vent /
Louvers
Casters (four)
Air Filter
Air Exhaust
(large hose)
Power Cord
Air Intake
Upper Drain Port
Lower Drain Port
Air Intake
(small hose)
7
PARTS IDENTIFICATION
IMAGE ACCESSORY NAME QUANTITY
Exhaust hose (large) 1
piece
Fixture 2 pieces
Screws 8 pieces
Window slider kit
1 set
Cover 2 pieces
Remote control 1 piece
1 Large Exhaust Hose Connector to Window
Kit with tab cut-outs
Storage Cover
1 piece
Intake
hose
(small) 1
piece
1
piece
1
piece
1
piece
1 piece
1 Large Slide Locking Exhaust Hose
Connector to unit
1 Small Slide Locking Intake Hose
Connector to unit
1 Small Intake Hose Connector to Window
Kit with tab cut-outs
Carbon Filter
1 piece
Optional Intake filter (sold separately)
1 piece
• Note: Please visit whynter.com for optional accessories information
8
CONTROL PANEL
LCD Display
Power Button
Fan Speed
Button
Warning Light
Timer / Temp
Set Control
Mode Control
Timer Button
Indication symbols on LCD :
Cooling mode
Dehumidifying mode
Fan only mode
High Fan speed
Medium Fan speed
Low Fan speed
Display set temperature
Display timer setting: Auto Switch On/Off
Power Button
Press to turn the air conditioner on and off
Mode Control
Press to change mode
Controls the 3 function modes: COOL, FAN,
and DEHUMIDIFY
Fan Speed Button
Press to change fan speed
Controls the 3 fan speeds: HIGH, MEDIUM, and
LOW. The fan speed indicator lights illuminates
to show the set fan speed.
NOTE: Unit does not need to be vented in Fan Mode
Timer Button
Press to program Timer Delayed
Switch ON or OFF function
Timer / Temp Set Control
Adjusts set temperature (1°C/ 2°F increments) or
timer hours (0 – 24 hours).
This unit is capable of displaying set tempera-
ture in Fahrenheit or in Celsius.
To convert from one to the other, press and hold
the Up and Down buttons for 3 seconds.
LCD Display
In Cool mode: shows set temperature in °C or °F
In DEHUMIDIFY and FAN only modes: shows
room temperature.
Warning Light and Stop display
Condensed water may accumulate in the unit. If the
internal tank becomes full, the Warning Light and
STOP display will come on and the unit will not oper-
ate until the unit has been drained.
Warning Light and Stop display
9
INSTALLATION
WARNING: NEVER OPERATE THE AIR CONDITIONER
WITHOUT THE AIR FILTER
Your Whynter portable air conditioner is equipped with a washable
Pre-Filter and an Activated Carbon Filter.
The washable Pre-Filter removes large particles such as dust, pet
hair and dander.
The Activated Carbon filter is designed to remove smoke and oth-
er odors. It is recommended you replace the Activated Carbon filter
every 2-3 months or as needed. Follow the steps below to install
the filters.
1. Pull up the pre-filter frame (Fig. 1a)
2. Place the activated carbon filter on the pre-filter frame by in-
serting it through the three pins (Fig. 1b)
3. Once the activated carbon filter is secured, insert the assem-
bled filter frame into the unit.
When there is excess water condensation inside the
unit, the air conditioner stops running and shows a
warning light (refer to page 8). This warning light
indicates that the water condensation needs to be
drained using the following procedures:
• Manual drainage (Fig. 2a)
Turn off the unit. Carefully roll the unit to a drain
location or position a flat container, dish or optional
drain bucket accessory (sold separately) under the
drain area of the lower drain port. Remove the drain
cover and rubber plug and the condensed water will
drain out automatically. Once all the condensed
water is drained, replace the drain rubber plug and
cover into the drain firmly.
Continuous Gravity Drainage Option (Fig. 2b)
This option is recommended if uninterrupted operation
is desired.
Remove the upper drain plug from the back of the unit
and install the drain hose (sold separately). Place the
open end of the hose to a drain area. This method is
recommended if uninterrupted operation is desired.
WARNING: The hose must be directed downward
from the upper drain port to allow the condensed
water to flow with gravity.
Attach drain hose
for Continuous
Drainage
Fig. 2b
Remove bottom
drain plug for
Manual Drainage
WATER DRAINAGE
The dehumidifying capacity of this unit is 76 pints per day. The patented self-evaporating function of the
ARC-122DS unit fully exhausts all condensation automatically in most environments when humidity is less than
70%. Areas with more than 70% humidity, the self-evaporating function can still exhaust about 98% of the
moisture and the remaining 2% of moisture will be collected in the water tank of
the air conditioner.
Fig. 2a
Fig. 1a
Fig. 1b
Note: Please contact support@whynter.com for retail sales information
or visit whynter.com for a list of optional accessories.
10
INSTALLATION
Location
The air conditioner should be placed on a hard and level surface strong enough to support its weight. The unit is
equipped with caster wheels for portability. It should only be rolled on smooth, flat surfaces. Use caution when
rolling on carpet surfaces. Do not
attempt to roll the unit over objects.
The air inlet and outlet should be free of any obstructions and be placed with at least 20” of clearance for efficient
air-conditioning and circulation.
Exhaust hose Installation
When using the air conditioner, the hot air from the exhaust hose must be exhausted out of the room to complete
the air exchange of the condenser. The intake hose is optional. When the unit is operating in dehumidifying or fan-
only mode, installation of the exhaust hose is optional.
Only extend the hose to the necessary length, keeping it as short and as straight as possible. We do not recommend
extending the hose more than 9' long. If you are interested in purchasing an additional 5’ exhaust hose, please
contact support@whynter.com for retail sales information or visit whynter.com for a list of optional accessories.
Note: To remove the hose(s) from the unit, press the release button and slide the hose and connector out.
Window kit Installation
Your window kit has been designed to fit most standard vertical and horizontal windows. However, it may be
necessary for you to modify the installation procedures for your window.
NOTE:
If your window opening is smaller than the minimum length of the window slider kit, the window slider kit can be cut to
fit the window opening. Never cut into the exhaust and intake hose cut-outs on the window slider kit.
If your window opening is larger than the maximum length of the window slider kit, additional material will be needed
to cover the open space such as, Plexiglas, PVC plastic, ply wood, etc. Alternately, an additional window slider kit
can be purchased to be used in combination with the included kit.
When using the window slider kit on a window or sliding door, additional security measures may be needed.
1. Expand each end of the exhaust (large) and intake (small) hoses about 6”.
2. Install the Large Exhaust Slide Locking Hose Connector to one end of the
exhaust hose (large hose) and the Large Exhaust Hose Connector with tab cut-outs
to the other end of the exhaust hose (large hose) by turning counterclockwise.
3. Install the Small Intake Slide Locking Hose Connector to one end of the
intake hose (small hose) and the Small Intake Hose Connector with tab cut-outs to
the other end of the intake hose (small hose) by turning clockwise.
4. Slide each of the slide locking hose connectors onto the rear of the unit
(See illustration)
1. Open the window approximately 5”.
2. Adjust the length of the window slider to the same length and width of the opening of the window. Cut the window
slider if necessary to fit the length of your window.
3. Insert the fixture through the back grooved side of the window slider hose cut-out. Line up the fixture with the 4
screw holes and tighten the fixture with 4 screws from the front side of the slider panel. (Fig. 1)
4. Fit the window slider kit into the window opening and close the window to secure the window slider kit. For long
term installation, you may screw the window kit into your window frame.
5. Move the air conditioner close to the window, extend the hoses to the necessary length, keeping them as short
and as straight as possible and attach the other end of each hose to the window slider kit.
6. Align the tab cut-outs of the hose connectors to the tabs on the fixtures and snap the hose connectors to the
window slider kit.
Fig. 1
11
OPERATION INSTRUCTIONS
BEFORE USING YOUR APPLIANCE
Remove the exterior and interior packaging
Before connecting the appliance to a power source and operating, let the unit stand upright for a minimum of 4
hours. This will reduce the possibility of a malfunction in the cooling system from handling during transportation.
SWITCHING ON/OFF THE AIR CONDITIONER
The appliance can be switched ON or OFF by pressing the POWER button on the control panel or the ON/OFF but-
ton on the remote control
COOLING MODE
In this mode, the air conditioner cools and dehumidifies the room. To activate this function mode, press the Mode
Control until the Cooling indicator light comes on. When the cooling mode is set, the compressor will start in ap-
proximately 3 minutes. In cooling mode, hot air is exhausted from the outdoor exhaust port and the exhaust hose
must be connected to exhaust out the hot air.
The temperature setting range of this air conditioner is from 61°F / 16°C to 89°F / 32°C. To set the temperature,
press the or buttons. This air conditioner has a 5°F temperature cushion which if the set temperature is within
5°F of the ambient temperature, the unit runs on fan only mode. This saves energy and prolongs the life of the com-
pressor of the air conditioner.
To set the fan speed, press the FAN button. In cooling mode, the difference in noise level between the 3 fan speeds
is not very noticeable when the compressor is on. Try setting the unit to Fan only mode, you should be able to hear
the difference between high and low fan speed settings.
A dual hose portable air conditioner will cool a room faster and will help minimize negative air pressure situation in
the room. If the outside temperature is much higher or more humid than the room, the intake hose can be covered
with the included cover and it will function like a single hose unit.
DEHUMIDIFYING ONLY MODE
In this mode, the air conditioner only dehumidifies the room, the compressor will activate intermittently depending on
the ambient temperature and the fan speed is set to LOW. To activate this function mode, press the Mode Control
until the Dehumidifying indicator light comes on. Please note that when switching function mode, there will be an
approximately 3 minute transition time. In dehumidifying mode, the hoses do require venting. If the hoses are
vented, the room will be cooled as it dehumidifies and outside air will enter the unit. To prevent cooling and air
intake, remove the hoses from the window kit and allow the warm air from the rear to be recirculated into the room.
If room temperature is higher than 77°F, the fan speed can be adjusted. If room temperature is lower than 77°F, the
fan speed is set at Low.
NOTE: When using dehumidifying mode, venting the exhaust hose to the outside is not required. If vented, the
warm air is exhausted to the outside and cooling within the room may occur. Additionally, if the exhaust hose is not
vented, the unit may require more frequent draining. The air conditioner does not have a humidistat in which a
specific humidity level can be set.
FAN ONLY MODE
In this mode, only the fan of the air conditioner runs and circulates the air in the room. To activate this function
mode, press the MODE button until the Fan indicator light comes on. In this function mode, the temperature
cannot be set. Subsequently, set the desired fan speed by pressing the Fan button. Fan Only mode does not
require the use of both exhaust and intake hoses.
12
OPERATION INSTRUCTIONS
TIMER (DELAYED SWITCH ON / OFF) FUNCTION
This function mode enables a delayed switch ON or delayed switch OFF of the air conditioner. The time (hours) de-
lay can be set, enabled and disabled. The timer is adjustable between 1 - 24 hours.
SETTING SWITCH OFF TIMER
With the air conditioner operating in any function mode, press the Timer button. The display timer setting will come
on. Set the desired time delay OFF hours by pressing the and buttons. The time increments are at 1 hour to up to
24 hours. When the delay time set has elapsed, the air conditioner switches off. To cancel the delayed switch off
function, press the Timer button or turn off the air conditioner.
SETTING DELAYED SWITCH ON TIMER
With the air conditioner is off, press the Timer button. The display timer setting will come on. Set the desired time
delay ON hours by pressing the and buttons. The time increments are at 1 hour to up to 24 hours. When the de-
lay time set has elapsed, the air conditioner switches on. To cancel the delayed switch on function, press the Timer
button or turn on the air conditioner.
AUTO RESTART
In the event of a power outage, the air conditioner restarts at the previously set function mode and settings when
power is restored.
NOISE LEVEL
Portable air conditioners may make sounds that are not familiar to you. The sounds listed below are normal. Noise
reflecting off hard surfaces such as a floor or wall can make the sounds seem louder than they actually are.
The compressor may make a pulsating or high-pitched sound
Water running from the evaporator to the water tank may make a splashing sound
Refrigerant flowing may make a gurgling sound
Fan sound may come from front and back air vents
COMPRESSOR LOCK OUT
This portable air conditioner is optimized to operate in an ambient temperature of 64°F 90°F. The compressor cir-
cuit has an automatic 3 minute time delayed start if the unit is turned off and on quickly. This prevents over-heating
of the compressor and possible circuit breaker tripping.
13
REMOTE CONTROL
The portable air conditioner can be switched on by the remote control. To transmit signals from the remote con-
trol to the air conditioner, point the front part of the remote handset towards the control panel on the air condi-
tioner. Reception of the signal is confirmed by a beep. The maximum signal transmission distance is approxi-
mately 8 meters / 26 feet.
NOTE:
Other appliances in the same room controlled by a remote control (TV, radio, stereo, etc.), may cause
interferences
Electronic and fluorescent lamps may interfere with the signal transmissions between the remote control
and the air conditioner
Remove the batteries if the remote control is not used for long periods
INSTALLING BATTERIES
To insert the batteries, open the flap on the back of the remote control by sliding if off. Strictly adhere to the
polarity signs on the bottom of the battery housing, close the flap once the batteries have been inserted.
Only use two dry LR03 AAA 1.5V Batteries (included) in the remote control
Always change both batteries at the same time
Power Control
On / Off
Fan Speed Control
High Medium Low
On / Off Timer Control
In running mode:
Auto Switch Off
In stand-by mode:
Auto Switch On
Press Up or Down button to adjust
the time setting for 1 hour interval
Fahrenheit/Celsius Button
Notes:
Do not drop the remote control
Do not place the remote control in a
location exposed to direct sunlight
The remote control should be placed
about 1 meter or more away from the
TV or any electrical appliances
LCD Display
Time / Temperature Set Control
Used for adjust the timer and temperature
The default display on control panel is room
temperature
When or key is pressed in cool mode, the set
temperature is displayed and may be adjusted
Timer setting is available from 1 - 24 hours by
pressing the Up or Down buttons
Mode Control
Press this button to change the operation mode in
the order of:
14
CARE AND MAINTENANCE
IM
PORTANT:
Switch off the air conditioner and disconnect the plug from the power outlet
Drain water by removing the drain plug
Always transport the air conditioner in an upright position only
CLEANING THE AIR FILTERS
To ensure the air intake is filtered properly and to assure that your air conditioner runs efficiently, it is recom-
mended to clean the air filters at least once every two weeks
This unit has two air filters; washable pre-filter and an activated carbon filter.
Switch off the air conditioner and remove the washable pre-filter and an activated carbon filter
Use a vacuum cleaner or tap lightly to remove loose dust and dirt from the pre-filter. Then rinse them thoroughly
under warm or cold running water (no hotter than 100F.)
Dry thoroughly before re-inserting the filters.
NOTE: The activated carbon filter is not washable. It should be replaced every 2-3 months or as needed. Please
contact support@whynter.com for retail sales information
WARNING! Never operate the air conditioner without the filter in place
CLEANING THE AIR CONDITIONER
Always switch off the air conditioner and disconnect the plug from the power supply outlet before cleaning the air
conditioner
Use a soft damp cloth to wipe the body of the unit.
Never use harsh chemicals, oil-based products, detergents, chemically treated cloths or other cleaning solutions.
These could possibly damage the body of the air conditioner
Switch off the air conditioner and disconnect the power plug from the power supply outlet before cleaning the air
conditioner
Clean the air filters
Drain the condensed water completely
Wrapped the power cord and bundle it with the tape.
On a warm day, turn on the Fan only mode for half a day so that the inside can dry out completely
Remove the batteries from the remote controller
If leaving the window kit in place, disconnect the exhaust and intake hose from the window slider kit and place
the included covers on the fixtures. To remove the hose connectors from the fixtures on the window kit, slightly
turn, push and gently pull the connector to release. Otherwise, remove the window kit from the window opening.
Place the storage cover over the air conditioner.
NOTE:
Please contact Whynter at support@whynter.com for additional internal maintenance cleaning instructions.
END OF SEASON STORAGE
This portable air conditioner comes with one end of season storage cover. We highly recommend that
storage cover bag is utilized when the unit is not going to be used for a period of time.
WARNING: To avoid danger of suffocation, keep this bag away from babies and children.
15
TROUBLESHOOTING
Problem Possible Causes Solutions
The portable air conditioner
does not turn on
Power failure / outage
The automatic switch, line fuse, or
breaker has been tripped
The power supply voltage is too low
The power cord is damaged
The L.C.D.I. power plug for the unit
is tripped
The internal water reservoir is full
Restore the power supply
Flip the switch / change the fuse / turn
the breaker back on. Also note that
you may have too many appliances
drawing power on one circuit, you may
need to move the other appliances to
another circuit
Move the unit onto another circuit with
the correct voltage
Call for service. Only authorized per-
sonnel should replace damaged pow-
er cord or power plug
Press the Reset button on the L.C.D.I.
power plug
Drain water from the air conditioner
Possible loose internal connection.
Please contact Whynter for service
The unit turns on but the com-
pressor does not turn on (the
fan runs but the unit is not
cooling)
The room temperature is outside of
the operational tolerances of the
unit
The Cooling mode is not on
The compressor has not turned on
yet because of its time delay
The set temperature is too high
The internal water reservoir is full
and Warning Light appears on dis-
play
This unit is designed to work in ambi-
ent temperatures of 64°F to 90°F
Press Mode Control until the Cooling
indicator light is shown on the display
Give the compressor 3 minutes to turn
on after the Cooling mode has been
selected
Set the air conditioner to a lower tem-
perature. It is recommended to set the
temperature to at least 5°F of the am-
bient temperature
Either manually drain the water by
removing the drain plug or allow the
unit to exhaust the water itself by run-
ning the fan only mode. Then cooling
will resume
Possible loose internal connection.
Please contact Whynter for service
The air coming out of the unit
is not very cold, or the airflow
volume is weak
The filters are dirty or obstructed
The air intake or exhaust is ob-
structed
The unit is set in DEHUMIDIFY or
FAN mode
The unit is set to low fan speed
Clean the air filters
Make sure there is at least 20" of
clearance from the air intake. Make
the length of the exhaust hose is as
short as possible
Set the unit to Cooling mode
Set the unit to a higher fan speed
Many common portable air conditioner problems are easily resolved. Try the troubleshooting suggestions
below to see if the problems can be resolved before having to contact the service department.
16
TROUBLESHOOTING
Problem Possible Causes Solutions
The unit has worked for a long
time, but the room is not cold
enough
Windows or doors are open
There are too many people in the
room
There is direct sunshine into the
room
The room is a kitchen or with many
heat-producing appliances
There is a server in the room
The room is too large
Close all windows and doors
You may need additional cooling or
another air conditioner
Close curtains or blinds and try to min-
imize the amount of direct sunlight into
the room
You may need additional cooling or
another air conditioner
The unit is very noisy The unit is not level
The surface underneath the unit is
uneven
Low power voltage
Make sure the unit is on hard, level
and stable surface
Move the unit to a location with a level
and hard floor
Make sure the wall outlet and support
the required power consumption of the
air conditioner and do not use an ex-
tension cord
The unit leaks water The unit is tilted or not leveled
The water tank is full
Make use the unit is leveled
Drain water from the drain plug at the
back of the air conditioner
Fan speed cannot be changed Fan speed differences are not very
noticeable
The fan speed difference is not very
noticeable when the compressor is on.
Try setting the unit to Fan only mode,
you should be able to hear the differ-
ence between high and low fan speed
settings.
1. Keep the exhaust hose as short and straight as possible
The exhaust hose removes heat from the room. It should remain as short and straight as possible without sharp
bends or twists to maximize efficiency. If the exhaust hose must be extended, do not
exceed 9’.
2. Turn the air conditioner on early
Turning the air conditioner on early instead of waiting until the hottest point of the day will allow the unit to be more
effective. The air conditioner will not have to work as hard to cool the room down and maintain the set temperature.
3. Reduce heat sources
Direct sunlight, televisions, computers and other heat generating appliances work against the air conditioner by
introducing heat into the space.
• Close window curtains and blinds to keep direct sunlight out
• Close doors and windows
• Keep ovens and stoves off
• Turn off unused lights
• Add weather stripping around windows and doors
4. Keep the air filter clean
Regular cleaning will help keep your air conditioner working properly. Dusty filters and vents greatly reduce the
airflow and efficiency of the unit.
• Clean the washable pre-filter regularly
• Replace the activated carbon filter every 2-3 weeks depending on use
• Vacuum any accumulated dust from around all vents
ADDITIONAL TIPS
ONE YEAR LIMITED WARRANTY &
THREE YEAR WARRANTY ON COMPRESSOR
This WHYNTER product is warranted to the original owner, purchased from an authorized Whynter dealer within the 48
U.S. continental states, for one year from the original purchase date against defects in material and workmanship under
normal residential usage. Should your WHYNTER product prove defective within one year from the date of purchase,
contact Whynter’s Customer Support team with the serial number and proof of purchase to make a warranty claim. A
Return Authorization number must be issued before returning any parts or products. Parts or products received without
a Whynter issued Return Authorization number will be refused. Under this warranty, Whynter will repair or replace any
parts found defective with new or remanufactured parts or exchange the defective product with a new, refurbished, or
remanufactured product at our discretion. All defective products and parts covered by this warranty will be repaired or
replaced on a mail-in basis to Whynter’s Service Center. This warranty is not transferable. After the expiration of the
warranty, the cost of labor and parts will be the responsibility of the original owner.
The compressor of portable air conditioners is warranted for an additional two years after the one year limited warranty
expires from the date of purchase.
Return freight is prepaid by Whynter within two months of purchase. After two months to one year, the customer will be
responsible for the return freight cost to Whynter’s Service Center. Please package the product carefully in its original
packaging to avoid damage in transit. Whynter is not responsible for damage resulting from shipper mishandling or
improper packaging. Please retain the original box and packaging materials.
THIS WARRANTY DOES NOT COVER:
Acts of God, such as fire, flood, hurricanes, earthquakes and tornadoes.
Improper power supply such as power surge, low voltage, defective household wiring or inadequate fuses.
Use in commercial or industrial applications.
Damage, accidental or otherwise, to the product while in the possession of a consumer not caused by a defect in
material or workmanship.
Damage caused by consumer misuse, tampering, lack of maintenance or failure to follow the care and special
handling provisions in the instructions.
Damage to the finish of the case, or other appearance parts caused by wear.
Damage caused by repairs or alterations to the product by anyone other than authorized by the manufacturer.
Removal, Replacement Packaging, Freight and Insurance cost for the warranty service.
Products sold AS IS or from an unauthorized reseller.
Products that have had their serial numbers removed or defaced.
DISCLAIMER OF IMPLIED WARRANTIES; LIMITATION OF REMEDIES
CUSTOMER'S SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR
REPLACEMENT AS PROVIDED HEREIN. CLAIMS BASED ON IMPLIED WARRANTIES, INCLUDING WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE LIMITED TO ONE YEAR OR THE SHORTEST PERIOD
ALLOWED BY LAW, BUT NOT LESS THAN ONE YEAR. WHYNTER SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR
INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND INCIDENTAL EXPENSES RESULTING FROM ANY BREACH
OF THIS WRITTEN LIMITED WARRANTY OR ANY IMPLIED WARRANTY. SOME STATES AND PROVINCES DO NOT ALLOW
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSE- QUENTIAL DAMAGES, OR LIMITATIONS ON THE DURATION
OF IMPLIED WARRANTIES, SO THESE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU. THIS WRITTEN WARRANTY
GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE.
The warranty, product contents and specifications are subject to change at any time without notice; please refer to
www.whynter.com for the most current information.
Please retain the original proof of purchase.
To register your warranty, please visit www.whynter.com and fill out the online
Warranty Registration form. Please be sure to include a copy of your purchase invoice.
To obtain service or information, contact Whynter LLC via email at
support@whynter.com or call 866-WHYNTER (866-949-6837).
Copyright © 2017 Whynter LLC
www.whynter.com
V 11.2.2017-1414
13

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whynter ARC-122DS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whynter ARC-122DS in de taal/talen: Engels als bijlage per email.

De handleiding is 5,85 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info