HOW TO USE YOUR HOB
Operation Instructions
1.
Put the pot on the hotplate.
•
Put the pot in the centre of the ceramic plate.
•
Make sure the air vent and the air entry are not
blocked and there are not metallic objects
around the hot plate.
2.
Plug in
After the power on, the buzzer sounds.
3.
Turn on
•
When the “on/off” button is pressed, the buzzer
sounds. The “ ” indicator lamp lights up, the
LED display “--”, indicating that the hotplate is in
the state of stand-by.
•
If you don’t press any key within 2 minutes, the
induction hotplate will shut down automatically.
4.
Heating
•
After the power supply is connected, press the
“ ” button, then press the “ ” button, the
buzzer sounds, the “ ” and the “ ” indicator
lamp light up, the default power level shall be
level 4, you can tune the power level to the max.
level by holding the “ ” key.
•
You can make a regulation by pressing the “ ”
or “ ” key.
5.
Childproof Lock
•
When the hotplate is in working state, to prevent
children from operation, you can activate the
childproof lock by pressing the childproof lock
button, the buzzer will sound at the same time.
In the childproof lock state, “Childproof Lock”
button and “ ” button can be operated, other
buttons are non effective.
•
You can deactivate the childproof lock by holding
the childproof button again. The buzzer will sound.
6.
Timer
•
In working state, after the “ ” key is pressed,
the buzzer gives out a sound, the maxi tube
flashes and displays “0”, indicating that the
induction hotplate enters timing setting state.
Each time the “ ” or “ ” key is pressed, the
time can increase or decrease by 1 minute. If it is
held, the time will increase or decrease quickly
with 10 minutes as an increment. When the timer
is max., then press the “ ” key, the time will
resume min. When the timer is min., then press
the “ ” key, the time will resume max.
•
After timing period is set, the time stabilizes after
the nixie tube flashes for 5 seconds to confirm
the period to be effective. If the time is 0, the
timer is non effective.
•
In the timing setting state, pressing the timer
button again will confirm the time.
•
In the timing setting state, if you hold the timer key,
the timer will be cancelled, the LED displays “--”.
•
When the working time reaches, the hotplate will
shut down automatically.
•
If the timer function isn’t selected, the hotplate
will shut down automatically when the default
shut down time of each level reaches. The default
shut down time of each level are as follow:
7.
Shut down
•
After using, please press the “ ” button, the
induction hotplate will stop heating.
•
The fan will run for a while to cool the induction
hotplate down.
8.
Residual heat indicator
•
If the pan has been removed or the hob has been
switched off, and the hotplate is still hot. The
indicator will display “H”, therefore, avoid touching
the hotplate when the indicator is shown.
E
D
C
1.
Induction cooking zone Ø180
2.
Display
1
2
A
B
C
F
A Childproof Lock D Heat setting increase
B Cooking zone activation button E Timer
C Heat setting decrease F ON/OFF
