-
heb de foutcode F23, hoe kan ik het probleem verhelpen?
Gesteld op 29-4-2010 om 20:46 in forum Whirlpool Montana 1400 Misbruik melden-
F23 HEATER FAILURE
Waardeer dit antwoord Misbruik melden
If the temperature increase during the first 40 minutes is less than 86°F (30°C).
1. Unplug washer or disconnect power.
2. Check connection to water heater.
3. Check resistance of heating element, if present on this model. (abnormal = infinity)
4. Check the water temperature sensor and connection to it.
Refer to the Water Temperature Sensor section. Geantwoord op 22-8-2010 om 15:37
-
F23 HEATER FAILURE If the temperature increase during the first 40 minutes is less than 86°F (30°C). 1. Unplug washer or disconnect power. 2. Check connection to water heater. 3. Check resistance of heating element, if present on this model. (abnormal = infinity) 4. Check the water temperature sensor and connection to it. Refer to the Water Temperature Sensor section. Geantwoord op 23-6-2011 om 09:04
Waardeer dit antwoord Misbruik melden
-
IK HEB OOK DIT PROBLEEM Geantwoord op 8-1-2013 om 17:22
Waardeer dit antwoord (9) Misbruik melden
-
Kent u iemand die het antwoord hierop weet? Deel een link naar deze vraag via email, Twitter of Facebook.