480647
8
Verklein
Vergroot
Pagina terug
1/18
Pagina verder
27
Start delay
(if available)
Select the programme and temperature, any additional options and the spin speed.
Pressing the “Start Delay” button the associated display comes on. Press the “Start Delay” button
repeatedly until the desired number of hours is reached. If the maximum number of hours is reached
for the delayed start, further pressing of the button starts the counter at zero again.
Press the
“Start/Pause”
button in order to start the programme, it will start after the selected time.
Correct the start delay
The start delay hours can be corrected even after the
“Start/Pause”
button has been pressed: press it
repeatedly until the desired number of hours is reached. Once the display has counted down the
selected programme is started and the related programme remaining time is displayed.
Cancel the start delay
Turn the programme selector and set it to the desired programme. The remaining time of the selected
programme is displayed and the
“Start/Pause”
button flashes. The programme can now be started
immediately by pressing this button.
N.B.
With liquid detergent, a dosing aid placed directly in the drum should be used if a start delay
has been selected.
Door lock
The door locks automatically after the programme start until the end of the programme.
The “Door Free” indicator is on, before the starting and at the end of the programme.
If the programme selector is moved to the “ ” position or if the electricity supply is interrupted, then
after approximately one minute the door is released.
In this case do not open the door, because hot water could be released from the appliance.
Programme end
The programme end is indicated by:
the “Door Free” indicator coming on and the remaining time indicator (if available) showing “0:00”.
1.
Turn the water supply tap off.
2.
Wait for the door to unlock (about one minute).
3.
Open the door and unload the machine. The programme
sequence indicators are all off.
N.B.
Do not fully close the door but leave it ajar to allow the drum to dry out.
Changing programme and options
1.
Press the
“Start/Pause”
button. The
“Start/Pause”
button flashes.
2.
Select the new programme, options and spin speed.
3.
Press the
“Start/Pause”
button. The new programme resumes the wash programme at the same stage at
which the preceding one was interrupted.
For this programme do not add any further detergent.
Programme interruption or pause
To interrupt the running programme for a certain period and continue it at a later time:
1.
Press the
“Start/Pause”
button. The indicator flashes.
2.
Following the desired pause press the
“Start/Pause”
button once again.
Cancelling the programme
If the current programme is to be terminated prematurely and cancelled, the water must be pumped
out first before the door can be opened:
1.
Set the programme selector to programme setting
“Drain”
. The indicator (if available) above the
“Start/Pause”
button flashes. The spin indicator shows “0” and the remaining time indicator shows
“0:02” minutes.
2.
Press the
“Start/Pause”
button in order to start the
“Drain”
programme.
3gb05030.fm5 Page 27 Monday, September 17, 2001 3:33 PM
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool AWM ECO 1200 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool AWM ECO 1200 in de taal/talen: Engels als bijlage per email.

De handleiding is 0,49 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Andere handleiding(en) van Whirlpool AWM ECO 1200

Whirlpool AWM ECO 1200 Snelstart handleiding - Nederlands - 2 pagina's

Whirlpool AWM ECO 1200 Gebruiksaanwijzing - Nederlands - 18 pagina's

Whirlpool AWM ECO 1200 Snelstart handleiding - Deutsch - 2 pagina's

Whirlpool AWM ECO 1200 Gebruiksaanwijzing - Deutsch - 19 pagina's

Whirlpool AWM ECO 1200 Snelstart handleiding - English - 2 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info