70489
11
Verklein
Vergroot
Pagina terug
1/17
Pagina verder
GB 11
Washing machine exterior and control
panel
Clean with a soft damp cloth.
If necessary, a neutral household cleaner can be
applied (do not use aggressive or abrasive products).
Lid seal
Clean from time to time with a damp cloth.
Water inlet hose(s)
Check the hose regularly for brittleness and
cracks. Replace if necessary.
TROUBLESHOOTING GUIDE
This washing machine is equipped with automatic
safety functions which detect and diagnose faults at
an early stage and allow you to react appropriately.
Often, however, the faults detected are small
enough to be solved in a matter of minutes.
For example:
*The washing machine does not start, no
lamp lights up.
Check whether:
the washing machine is plugged in.
the wall socket is functioning correctly
(use a table lamp or similar).
the
“On/Off”
button is pressed.
*The washing machine does not start, but
the “Start” lamp is flashing.
Check whether:
the programme has been changed.
Press the “Start” button again.
*The washing machine does not start
after having pressed “Start”, the lamp of
the “Start” button keeps on flashing.
Check whether:
the washing machine lid is properly closed. Open
and close it again.
*The washing machine stops during the
programme.
Check whether:
the “Rinse Hold” button is pressed: terminate
this option by pressing the button again or by
starting the “Drain” programme.
the programme has not been started (the “Start
lamp still flashes). Press the
“Start”
button.
the safety system of the washing machine was
activated. See fault description table.
*Detergent and additive product
residues in dispenser at end of wash.
Check whether:
the detergent dispenser is properly installed and
is not blocked (see “Care and maintenance”).
the foreign body trap in the water inlet hose is
not blocked (see “Care and maintenance”).
*The washing machine vibrates during
the spin cycle.
Check whether:
the washing machine is levelled and that all the feet
are adjusted (see “Installation”).
the transport bracket has been removed. Before
starting up the washing machine, the transport
screws and the transport bracket MUST be
removed (see “Installation”).
*Final spin results are poor.
Note:
The washing machine has an unbalance
detection and correction system. If individual heavy
items are loaded (a bathrobe, for example), this
system may reduce the spin speed automatically or
interrupt the spin if it detects too great an
unbalance at the start of the spin, in order to
protect the washing machine.
Check whether:
the pump impeller is obstructed (see “Cleaning
the foreign body trap”).
if the laundry is still too wet at the end of the
programme: possibly add other items of clothing
and repeat the spin cycle.
there is foam on the wash: repeat a rinse-spin
cycle to eliminate excess of detergent.
Excessive foam formation may also prevent spinning.
IFU_Alpha_electr_gb.fm Page 11 Wednesday, March 30, 2005 9:32 AM
11

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Whirlpool-AWE-6722

Zoeken resetten

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool AWE 6722 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool AWE 6722 in de taal/talen: Engels als bijlage per email.

De handleiding is 1,28 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Whirlpool AWE 6722

Whirlpool AWE 6722 Snelstart handleiding - Nederlands - 2 pagina's

Whirlpool AWE 6722 Gebruiksaanwijzing - Nederlands - 16 pagina's

Whirlpool AWE 6722 Snelstart handleiding - Deutsch - 2 pagina's

Whirlpool AWE 6722 Gebruiksaanwijzing - Deutsch - 16 pagina's

Whirlpool AWE 6722 Snelstart handleiding - English - 2 pagina's

Whirlpool AWE 6722 Snelstart handleiding - Français - 2 pagina's

Whirlpool AWE 6722 Gebruiksaanwijzing - Français - 16 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info