662567
36
Verklein
Vergroot
Pagina terug
1/298
Pagina verder
GB34
When the machine is ready for use, you can access the menu in order to change the following parameters or functions:
•RINSING
•SETTING THE CLOCK
•LANGUAGE
•AUTO START
•DESCALING
COFFEE TEMPERATURE
AUTO OFF
•WATER HARDNESS
•RESET TO DEFAULT
•STATISTICS
SETTING THE TONE
•EXIT
Setting the language
To change the display language, proceed as follows:
Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) to select LANGUAGE.
Press OK (B7).
Press buttons (B5) and (B6) until the required language is displayed.
Press OK (B7) to confirm.
Press the MENU button (B2) to exit the menu.
Rinsing
This function is used to obtain hotter coffee. Proceed as follows:
If, when you turn the machine on, you select a small cup of coffee (less than 60ml), use the hot water from the rinse cycle
to pre-heat the cup.
If, on the other hand, more than 2/3 minutes have elapsed since the last coffee was made, pre-heat the brewing unit
before making any more coffee. To do so, press the MENU button (B2) to access the menu; the display shows the message
RINSING. Press OK (B7). The display shows 'OK' TO CONFIRM. Press the OK button (B7) again. Let the water run into the
drip tray below or use it to fill (and then empty) the cup to be used for coffee, thus warming it.
Changing the duration of operation
The appliance is factory-set to switch off automatically after 30 minutes of inactivity. To change this time (max 120 min.), proceed
as follows:
•Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message AUTO-OFF.
Press OK (B7) to confirm.
Press buttons (B5) and (B6) to set the period of time after which the appliance must switch off (30 minutes, 1 hour, 2 hours).
Press OK (B7) to confirm.
Press the MENU button (B2) to exit the menu.
Setting the clock
Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message
ADJUST TIME.
Press OK (B7).
To set the hours, use buttons (B5) and (B6) then press OK (B7) to confirm.
To set the minutes, use buttons (B5) and (B6) and then press OK (B7) to confirm.
Press the MENU button (B2) to exit the menu.
Setting automatic start time
This function allows you to set the machine to switch on automatically at a time of your choosing.
Make sure the appliance clock has been set.
Press the MENU button (B2) to access the menu and then buttons (B5) and (B6) until the display shows the message
AUTO-START.
Press OK (B7).
The machine displays the message AUTO-START ENABLE?.
Press OK (B7) to confirm.
The display shows AUTO-START 07:30..
To set the auto start time, use the buttons (B5) and (B6) then press OK (B7) to confirm.
To set the minutes, use buttons (B5) and (B6) and then press OK (B7) to confirm.
Press OK (B7), the display shows AUTO-START ENABLED.
CHANGING AND SETTING MENU PARAMETRS
36

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Whirlpool ACE 102 IX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Whirlpool ACE 102 IX in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds, Noors, Fins als bijlage per email.

De handleiding is 58,06 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info