24538
15
Verklein
Vergroot
Pagina terug
1/25
Pagina verder
15
7. Select the desired options
The light corresponding to the depressed button
illuminates.
8. Select the DELAY START option
To delay starting of the program, press the DELAY
START button (the corresponding light illuminates).
The figures corresponding to the selected delay will
be displayed for about 3 seconds, after which the
duration of the selected program will appear on the
display.
During this period it is possible to load other laundry:
• depress START/PAUSE button;
• open the door:
• load laundry;
• close the door and depress START/PAUSE button
again.
9. Start the program
Press the START/PAUSE button. The relevant light
will stop flashing, and only the light relevant to the
phase in progress will remain lit.
If you have chosen a delayed start, the washing
machine will begin the countdown.
The display will show the duration of the program or
the selected delay.
10. Altering a program
You can alter the program before it starts.
When the program has started, you can only reset it
by turning the program selector dial to OFF, you can
then select a new program. Start it by depressing the
START/PAUSE button.
DELAY
START
SUPER
RINSE
RINSE
HOLD
EASY
IRON
QUICK
WASH
PRE-
WASH
11. Interrupting a program
Depress the START/PAUSE button to interrupt the
running program, the corresponding light will flash,
press the START/PAUSE button again to restart the
program.
12. Cancelling a program
Turn the selector dial to OFF to cancel a program
which is running. Now you can select a new
program.
13. Opening the door after the program
has started
Pause the machine by pressing the START/PAUSE
button.
If the door does not open, this means the machine is
already heating, the water level is above the bottom
edge of the door or the drum is turning.
If you can not open the machine door, but need to,
switch off the machine by turning the selector dial to
OFF. After about 3 minutes the door can be opened
(pay attention to the water level and temperature!).
To restart turn the selector dial to the previous
program selected (select also the options) and press
the START/PAUSE button.
14. At the end of the program
The machine stops automatically.
If the RINSE HOLD option has been selected the
door remains locked, the light of the START/PAUSE
button goes off, RINSE HOLDING pilot light and
RINSE HOLD light remain alight, to indicate that the
water must be drained before opening the door. The
display shows a blinking zero.
Turn the program selector dial to Reset OFF to
switch the machine off .
Remove the laundry from the drum and carefully
check the drum is empty to avoid any forgotten items
being damaged in a subsequent wash (e.g shrinking)
or their colour running into a load of whites.
If you do not intend to carry out another wash, close
the water tap.
Leave the door open to prevent the formation of
mildew and unpleasant smells.
132990940.qxd 04/06/2004 08:40 Pagina 15 (Nero/Process Black pellicola)
15

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Westinghouse LF652D bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Westinghouse LF652D in de taal/talen: Engels als bijlage per email.

De handleiding is 0,45 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info