20
Completely remove the control panel from the cooking box assembly exposing the valves, burners, igniters, and manifold.
Vieluxe
®
27" Built-In
Vieluxe
®
39" Built-In
ƽ DANGER
Do not use an open flame to check for gas leaks. Be sure there are no sparks or open
flames in the area while you check for leaks.This will result in a fire or explosion which can
cause serious bodily injury or death and damage to property.
ƽWARNING: You should check for gas leaks every
time you disconnect and reconnect a gas fitting.
Parts required: a soap and water solution and a rag or
brush to apply it.
Note: Since some leak test solutions, including soap
and water, may be slightly corrosive, all connections
should be rinsed with water after checking for leaks.
ƽWARNING: Make sure all burner control knobs
are in the OFF position, including the side
burner, smoker, and rotisserie.
1) Turn on the gas supply.
Check for leaks by wetting the connections with the
soap and water solution and watching for bubbles. If
bubbles form or if a bubble grows there is a leak.
ƽWARNING: Do not ignite burners while checking
for leaks.
Check:
a) Valves on left side (valve to manifold connections).
b) Valves on right side (valve to manifold connections).
c) Gas lines to manifold connections.
ƽWARNING: If there is a leak at valve to manifold
connections (a), (b), or gas line to manifold
connection (c), turn OFF the gas and retighten the
fitting with a wrench and recheck for leaks with a
soap and water solution.
If a leak persists after retightening the fitting, turn
OFF the gas. DO
NOT OPERATE THE GRILL.
Contact your dealer.
Vieluxe
®
27" Built-In
GENERAL MAINTENANCE
Vieluxe
®
39" Built-In
