OPERATING INSTRUCTIONS
Programming
heater-starting time
Recalling/canceling
pre-selected times
Programming
duration of
operating time
Setting the
remaining
operating time
Press or button. Memory location number flashes.
Press or button to preset starting time. Wait 5 seconds. Starting time is now stored.
Day of week flashes.
Press or button to set day of week. Wait 5 seconds. Day of week is now stored.
The number of memory location remains on the display.
The timer is now in the programmed mode and switches heater on at the preset time.
To recall: Press or button until the desired memory location number is displayed.
Read off preset time.
To cancel: Press or button repeatedly until the memory location numbers are no
longer visible on the display.
The heater must be switched off. Press the button.
Operating time flashes.
Press or button to set operating duration time between 1 and 120 minutes (minimum
10 minutes recommended).
Heater must be in operation.
Press button. Remaining operating time flashes.
Press or button to set remaining operating time. Wait 5 seconds. The remaining
operating time is now stored.
Table 1: Digital Timer Instructions (continued)
15
WEBASTO DBW SERIES HEATERS
