1
WEBASTO DBW SERIES HEATERS INTRODUCTION
Introduction
Important Information
• The heater must be installed according to the “Installation Instructions” and must be examined by an officially
recognized, Webasto authorized installation/ servicing facility.
• When the heater is installed in vehicles used for the transportation of dangerous or inflammable goods, or in
boats, the appropriate regulations must be observed.
• Webasto Thermosystems, Inc. does not recommend the installation and servicing of Webasto products by
untrained, unauthorized personnel or end-users.
• Installations and servicing of Webasto products by untrained, unauthorized personnel and end-users will release
Webasto Thermosystems, Inc. and Webasto authorized distributors, dealers and personnel from responsibility for
damage to Webasto product or collateral property and personal injury.
• Any use, operation, installation, modification or application of the product not described in Webasto manuals, or
subjecting the product to extreme or unusual conditions beyond the limits of specified performance characteristics
is misuse of the product.
• Failure to comply with all operation, installation, and servicing instructions is a misuse of Webasto product.
The same applies for repairs without using genuine Webasto service parts. This will void the coolant heaters
“Official Marks of Conformity.”
• In the vicinity of the coolant heater, a temperature of 185 °F (85 °C) must not be exceeded under any
circumstances (e.g. during body paint work). A violation of this temperature limit may cause permanent damage
to the electronics.
