805491
9
Verklein
Vergroot
Pagina terug
1/36
Pagina verder
9
If the output is “not used” there is the possibility to use the
output as a booster pump of the main pump P1 with System 1.
This function is useful when utilizing a “drain back system” to
enable the primary pump P1 to initiate the circulation of the
heat transfer fluid.
In this instance pump P2 is normally installed in series with the
main pump P1.
- You could choose the duration for the running time of P2 with
(+) or (-). (Adjustable 1 to 10 minutes)
Booster function explanation:
Exemple:
2.4.3 Pump P3
P3 is a supplementary output which can be used for an
additional extra function and is generally used in combination
with the solar system or totally independent. There will be a
choice between the different functions depending upon the
selected system configuration selected.
2.4.3.1 Thermostat Heating Function
With an additional sensor (T3) this function is used for
secondary heat source pump (P3) control.
Suggestions:
- Pump controls for Fuel or Gas burner…
- Immersion Electrical Heater inside the solar tank.
Important: In this instance an external power relay must be
connected for the switching of the output load!
Example:
All adjustable settings available for this function are accessible
in the Settings menu; see section “Settings” chapter 2 for a
further explanation of the functions.
2.4.3.2 Thermostat Cooling Function
With an additional sensor (T3) this function is used for
cooling of the solar tank with an external heat sink
Suggestions:
Charging a swimming pool.
Example:
All adjustable settings available for this function are accessible
in the Settings menu; see section “Settings” chapter 2 for a
further explanation of the functions.
2.4.3.3 Diffcontrol Function
With additional sensors (Tcold=T3, Twarm=T4) this function
is used for secondary heat source pump control or charging
a tank.
The loading of the Tcold=T3 is activated if the temperature
difference “dt” between the Twarm=T4 and the Tcold=T3 is
sufficient.
Example 1:
 Pump 2 --- -
P2 Booster
Boost Duration 2min
Tank1
T2 C)
dTMin
dTMax
P1
Collector
T1 C)
Maxtemp
Tank1
dTMax
dT = T1
T2
100%
0%
dTMax
Boost time
P2
T1
P1
T2
Extra Function to control a
second pump in serie with P1
to help the liquid circulation
startupthe pump coupled with
an external burner.
P2
Heat Source
T1
P3
P1
T3
T2
Extra Function to control
the pump coupled with
an external burner.
Heat
sink
T1
P
3
P
1
T
3
T2
Extra Function used to control the pump to
warm up another tank or basin
P3
P1
T2
Extra Function used to control
the pump (P3) to warm up
"Tcold=T3", if the temperature
difference (dt) to "Twarm=T4"
is sufficient.
T1
TC = T3
TW = T4
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts Solar Controller LCD PLUS bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts Solar Controller LCD PLUS in de taal/talen: Duits, Engels als bijlage per email.

De handleiding is 1.12 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info