805547
1
Verklein
Vergroot
Pagina terug
1/2
Pagina verder
MILUX
General safety information
The instructions described in this manual must be observed. Failure to comply with
theses instructions will result in material damages, injury or fatal accidents.
This product must be used exclusively to regulate heating installations.
Other use is not compliant
Contents
1. Product characteristics
2. Display
3. Keypad
4. First use
5. Standby switch
6. Operating modes
6.1. TIME SETTING menu
6.2. COMFORT Mode
6.3. REDUCED Mode
6.4. AUTOMATIC Mode
6.5. PROGRAM Menu
6.6. ANTIFREEZE Mode
7. Special functions
7.1. HOLIDAY function
7.2. Keypad lock
7.3. Cooling function
7.4. RESET function
8. Battery replacement
9. ITCS function (optional)
10. Technical characteristics
11. Problems and solutions
12. Recycling
13. Annexes
1. Product characteristics
Weekly programmation by 1 hour step
9 built-in programs
4 user programs
Program graphic display
Room temperature and time display.
Comfort / Reduced / Anti-freeze temperatures.
Temporary temperature override
Automatic or Manual operation
Holiday function
Keypad lock function (child safety)
Battery operated > 2 years
Low battery pictogram
Battery replacement without loss of the program memory except the
hour
« O / I » switch for standby mode
Intelligent Temperature Control System function (optional): ITCS
2. Display
[1] : Operating mode menu
[2] : Temporary temperature override
[3] : Heating indicator
[4] : Room temperature or set temperature
[5] : Cooling indicator
[6] : if displayed, [4] indicates the ambient temperature
[7] : Holiday function activated
[8] : Current day graphic program
[9] : Hour
[10] : Day of the week (only available on weekly version)
[11] : Low batteries
3. Keypad
Validation key (OK)
Plus key (+)
Minus key (-)
Left navigation key (◄ )
Right navigation key (►)
4. First use
Check that the battery protection is well removed.
Put the switch on « I » position (see chapter 5- stanby switch))
Adjust the date and the hour (see chapter 6.1 TIME SETTING menu)
The thermostat is ready for operation. The default operating mode is the
automatic mode with the factory program P1”,(see the detailed program
P1” in the annexes).
You can customize your program as you want. To do so, refer to chapter 6.5
PROGRAM Menu.
5. Standby switch
This switch is located under the product as shown below:
To put the product in standby, put the switch on « O » position. The screen
switches off to reduce battery consumption. The keys (+), (-), (◄) and (►) become
inactive. A press on (OK) key allows displaying briefly the ambient temperature
and the hour, together with the pictogram:
To activate the product, put the switch on « I » position. During 3 seconds, the
software version will be displayed. Then, the thermostat comes back in the
selected operating mode before the standby.
WARNING: In this standby mode, your installation can freeze.
6. Operating modes
Use the navigation keys (◄) or (►) to change the operating mode.
6.1. TIME SETTING menu :
Press (OK) to enter in the menu. The minute display is flashing.
Set minute value with (+) and (-) keys
Press (OK) key to validate.
Set hour value with (+) and (-) keys
Press (OK) key to validate.
( (►) key allows to return to the minute setting)
Weekly version
Set day value with (+) and (-) keys
(1=monday, 2=tuesday, …)
Press (OK) key to validate
6.2. COMFORT Mode :
In this mode, thermostat applies comfort setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted:
The ambient temperature is displayed after few seconds:
A press on (OK) key allows the displaying of comfort setpoint temperature.
To apply temporarily comfort mode, use the special function « HOLIDAY ».
6.3. REDUCED Mode :
In this mode, the thermostat applies reduced setpoint temperature indefinitely
By pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like
the COMFORT temperature. The ambient temperature is displayed after few
seconds. A press on (OK) keys allows the displaying of reduced setpoint
temperature.
To apply temporarily reduced mode, use the special function « HOLIDAY ».
6.4. AUTOMATIC Mode :
The thermostat follows the chosen program (see chapter 6.5 for the program
selection / edition) with respect to current hour.
By pressing (+) and (-), an overriden temperature can be adjusted until the next
program step:
The pictogram is displayed.
At the next program change, the pictogram will disappear and the program will
carry on.
6.5. PROGRAM Menu:
Press (+) or (-) keys to choose a program number:
= Comfort setpoint temperature set in the COMFORT mode
= Reduced setpoint temperature set in the REDUCED mode
If you select a built-in program « P1 to P9 », press (OK) key to apply this
program in the automatic mode .
A light weekly programs description is given below:
Number Description
P1 Morning, Evening & Week-end
P2 Morning, Midi, Evening & Week-end
P3 Day & Week-end
P4 Evening & Week-end
P5 Morning, Evening (bathroom)
P6 Morning, Afternoon & Week-end
P7 7h - 19h (Office)
P8 8h - 19h, Saturday (Shop)
P9 Week-end (Secondary House)
A detailed programs description is given in annexes.
If you select a user program « U1 à U4 », press (OK) key to enter in edition
mode :
With navigation keys (◄) and (►), move the blinking cursor on the hour of the day
that you want to modify.
When the day seems to be correctly edited, press (OK) key.
Daily version: the day’s program is validated for every day of the week.
Weekly version: you switch to the next day edition. By validating the day 7, you
validate the program edition. This program will be followed by your thermostat in
automatic mode (see chapter 6.4).
6.6. ANTIFREEZE Mode :
In this mode, the thermostat applies antifreeze setpoint temperature indefinitely. By
pressing (+) or (-) keys, setpoint temperature flashes and can be adjusted like the
COMFORT temperature. The ambient temperature is displayed after few
seconds. A press on (OK) keys allows the displaying of the antifreeze setpoint
temperature.
To apply temporarily the antifreeze mode, use the special function « HOLIDAY ».
PPLIMW15281Ac
GB
7. Special functions
7.1. HOLIDAY function :
Go to HOLIDAY mode by using navigation keys (◄) and (►). The
pictogram and the text “nomust flash:
You can adjust the duration. Press (+) or (-) keys to adjust hour number (H) if it is
less than 24 hours, then the day number (d).
With navigation keys (◄) and (►), select the comfort or reduced or
antifreeze mode. The pictogram and the remaining number of hours /
days will be displayed until the period’s end:
Once completed, the thermostat will switch on automatic mode .
To stop holiday mode before the period’s end, go to HOLIDAY menu with
navigation keys (◄) and (►). pictogram and the remaining time flash. Use (-)
key to display “no” and validate with (OK) key.
7.2. Keypad lock
This is a prevention function against any parameter change. It is valid in comfort
, automatic , reduced and antifreeze mode.
To lock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.
is displayed.
To unlock the keypad, maintain (OK) key pressed then press on (-) or (+) keys.
is displayed.
7.3. Cooling function :
You can use your MILUX RF to control a cooling system (air-conditioner…). To
change thermostat operating mode, move the cursor on the comfort menu
with navigation keys (◄) and (►). Then, maintain (OK) key pressed and press
simultaneously on (◄) key. One of the below screens must appear:
Use (+) or (-) keys to modify the operating mode. Press (►) key to come back to
the main screen and to validate your selection.
In cold mode “COLD”, the antifreeze mode is removed.
7.4. RESET function :
This function is used to erase all programs and to restore the default
manufacturing parameters.
Go to TIME SETTING menu , maintain (OK) key pressed during 10 seconds.
All display’s segments will light up. It will demonstrate that the thermostat is in
reset phase. Once completed, the thermostat restarts in the delivery configuration
with the following default settings:
U1 to U4 programs reset all in comfort.
In heating mode :
Setting temperatures: 21°C, 17°C, 6°C.
In cooling mode:
Setting temperatures: 22°C, 24°C
WARNING: Remember to adjust time value after the reset (see chapter
6.1)
8. Battery replacement
Once the low battery pictogram is displayed, you have to replace the batteries.
Put on the clip on the left side and pull the front face to remove it :
Replace the both batteries:
Close the thermostat by placing the front face in front of the rear face
and push on it to lock:
WARNING: Remember to adjust the value of the time after the reset
(see chapter 6.1)
9. ITCS function (optional)
Your thermostat has an Intelligent Temperature Control System (ITCS). It will
activate your installation in advance to ensure the desired temperature at the hour
programmed following your weekly program.
To operate, this Intelligent Temperature Control System realizes automatically
several time measurements. When you switch on your thermostat for the first time,
a time measurement taken to reach the setting temperature is realized. This time
will be adjusted by new measurements at each program change to adapt with
outside temperature evolution. Then, you can program your thermostat without
advancing the switch on times because it will be done automatically for you.
10. Technical characteristics
Environment. (Temperatures)
Operating temperature:
Transport and storage :
0°C - 40°C
-10°C to +50°C
Measurement precision 0.1°C
Set temperature range :
Comfort and Reduced
Antifreeze
5°C - 35°C by 0,5°C step
0,5 - 10°C by 0,5°C step
Regulation characteristics
Cycle (PWM): 15 minutes for 2°C with
Anti-short cycle of 3 minutes in OFF and 2
minutes in ON.
Electrical Protection Class II - IP30
Batteries &
Operating life
2 LR3 AAA 1.5V Alkaline batteries
~ 2 years
Sensible elements:
Internal
NTC 10k ohms at 25°C
Connection 3 points screw connector in the bottom of
the case
Max. switching current/voltage 5A/400 VAC resistive
CE Directives
Your product has been designed
in conformity with the European
Directives.
EMC 2004/108/EC
RoHS 2011/65/EU
Product conformed to :
Classification :
Contribution :
UE 811/2013 and 2010/30/UE
IV
(2%)
11. Problems and solutions
My thermostat doesn’t switch on
Battery problem
- Check that the batteries protection is well removed.
- Check the direction of the batteries.
- Check the batteries charge
- Check the switch position
My thermostat displays an error message
Sensor problem
The message Err is displayed and the pictogram
flashes (ambient sensor)
Low batteries The pictogram flashes
- Replace the batteries
My thermostat seems to operate correctly but the heating doesn’t function
correctly
Output - Check the receiver connections.
- Check the power supply of the heating element.
In case of persistent problems, contact your installer or seller.
12. Recycling
Electrical and electronic out of order appliances must be collected
separately by using specific systems in your country.
Batteries should not be recycled with household waste but collected
in suitable collection systems
13. Annexes
Comfort =
Reduced =
= daily version
1

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts Milux bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts Milux in de taal/talen: Engels als bijlage per email.

De handleiding is 1.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info