805498
2
Verklein
Vergroot
Pagina terug
1/3
Pagina verder
Comfort Mode:
Use this mode to set your installation indefinitely in Comfort mode.
The room temperature and the humidity level are displayed all the time. If you press you can see the setting
temperature and actual time.
You can adjust the comfort temperature for this zone with and keys. (Default setting 21°C)
Every others zones will follow there thermostat setting temperature.
Automatic Mode:
In this mode your installation follows the program assigned for each zone. Press to see the program followed of
the current zone,
The room temperature and the humidity level are displayed all the time. If you press you can see the actual
time and the graphic programme for the selected zone. To see others zones use and keys.
Reduce Mode:
Use this mode to put your installation indefinitely in reduce mode.
The room temperature and the humidity level are displayed all the time. If you press you can see the delta
temperature (difference between the comfort temperature and reduced temperature).
You can adjust the delta temperature (dt) with and keys. (Default setting 4°C)
Every others zones will follow there thermostat setting temperature minus or plus (depending of your choice on the
receiver) the dt
Example for one zone =>comfort temp. 22°C –/+ dt (4°C) = the reduced temperature for this zone will be 18°C
Anti-Freeze Mode:
Use this mode to protect your installation against freeze.
The room temperature and the humidity level are displayed all the time. If you press you can see the setting
temperature and the time.
You can adjust the anti freeze temperature with and keys. (Default setting 6°C)
Every others zones will follow this setting temperature.
Holiday Mode:
Use this mode for an absence period. (For your holiday per example)
To access to this mode place your thermostat in Anti-Freeze mode
, push the key, the is displayed
Now you can adjust with and the period duration. (In hours “H” if below 24h then in days “d”).
When the period is finish the thermostat will come back automatically in mode.
If you want to interrupt this period, adjust the duration to “no”.
The temperature applied for this duration is the temperature value adjusted in anti-freeze mode .
Operating Mode (only available if H.C: Menu parameter is activated):
Use to select « Mod HEAT » for heating application only (or in winter season with manual reversible
Heat and Cold system).
Use
to select « Mod COOL » for cooling application only (or in summer season with manual
reversible Heat and Cold system)
Use to select « Mod Auto » for automatic reversible heat and cold system.
Set Clock Menu:
Use this mode to adjust the clock and day.
Press , to adjust the minute with and keys.
Press , to adjust the hour with and keys.
Press , to adjust the day with and keys.
Program Menu:
Use this mode to assign or edit a program for each zones of your installation.
(See the PROGRAM EDITION menu for more explanation)
By pressing key the zone number starts to blink,
Use
/ to see the
With / you can Select other days of the program
The zone or the User program.
(See User program edition) Program number
Shows the daily program
If you select a zone number “01” to “12” and press , you can then select a weekly program to be followed for
this zone.
The program numbers start to blink:
Use / to select the program.
If you select a built in program “P1 to “P9” or a user program “U1” to “U12”, and press , then this program
will be followed in mode.
Built-in programs description
P1: Morning, Evening & Week-end P6: Morning, Afternoon & Week-end
P2: Morning, Midday, Evening & Week-end P7: 7h - 19h (Office)
P3: Day & Week-end P8: 8h – 19h , Saturday (Shop)
P4: Evening & Week-end P9: Week-end (Secondary House)
P5: Morning, Evening (bathroom)
User programs edition:
1/ Program editing:
First of all, select a user program (U1 to U12) with and keys. Press , the first cursor of the program
graphic starts to blink. Then, you can choose the state of temperature ( or with +/- keys) at the current hour.
Use and keys to slide the blinking cursor position in the day and modify or correct easily the program.
When the displayed day is correct, press to jump to the following day.
When you press on day 7 you return to the top menu .Now your user program will be followed if you select
this user program for a zone and put your thermostat in operating mode.
2/ Program assigning:
You can also assign a different program at each zone, to do this, select a zone (01 to 12) with and keys,
the zone number blinks, then press , now the program number blinks, you can select with and the
program which will be followed by the selected zone.
PROGRAM EDITION
In order to configure the RF-thermostat with the receiver,
- the receiver must be in theRF init” mode (see the receiver leaflet for more explanation)
- Press the key during 5sec to enter the parameters menu.
When “CrF init” and the graphic appears the thermostat send the radio
configuration at the receiver.
- Once the receiver is configured press key to come back in the main menu
PAY ATTENTION!!! The thermostat has to be placed near to the receiver for correct configuration.
RADIO CONFIGURATION (Link emitter with the receiver)
day
Hour at the cursor
position
The key sets temperature at the current blinking program hour
The ke
y
sets tem
p
erature at the current blinkin
g
p
ro
g
ram hou
r
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts Milux Hygrostat bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts Milux Hygrostat in de taal/talen: Engels als bijlage per email.

De handleiding is 0.97 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info