805499
2
Verklein
Vergroot
Pagina terug
1/28
Pagina verder
GB
2
INSTALLATION AND OPERATION MANUAL
ClimaticControl-HC Heating & Cooling Controller
IMPORTANT!
Before starting work the installer should carefully read this Installation & Operation Manual, and make sure all
in- structions contained therein are understood and observed.
ClimaticControl-HC should be mounted, operated and maintained by specially trained personnel only. Personnel
in the course of training are only allowed to handle the product under the supervision of an experienced fitter.
Subject to observation of the above terms, the manufacture shall assume the liability for the equipment as
provided by legal stipulations.
All instructions in this Installation & Operation manual should be observed when working with the control. Any
other application shall not comply with the regulations. The manufacturer shall not be liable in case of
incompetent use of the control. Any modifications and amendments are not allowed for safety reasons.
ClimaticControl-HC mainte- nance may be performed by service shops approved by the manufacturer only.
The functionality of the control depends on the model and equipment. This installation leaflet is part of the product
and has to be obtained.
Subject to technical modification!
Table of content
1. Application ..................................................................................................................................................... 3
2. References, Symbols and Abbreviations ...................................................................................................... 3
3. Safety Instructions ......................................................................................................................................... 3
4. Display ........................................................................................................................................................... 4
5. Installation and Electrical connections .......................................................................................................... 4
5.1 ClimaticControl-HC Installation ..................................................................................................................... 4
5.2 Electrical connections.................................................................................................................................... 5
5.3 Hydraulic installation ..................................................................................................................................... 6
5.4 Room Temperature – Direct Plug In ............................................................................................................. 9
6. Types of operating modes / Program menu ................................................................................................ 14
6.1 Heating and cooling switch ......................................................................................................................... 14
There are several ways to switch the system between heating and cooling. .................................................................. 14
Use parameter #0 Type (See Chap 7.1) ..................................................................................................... 14
Use the user interface of the Climatic Control HC if parameter #0 Type=Rev (See Chap 7.1) .................. 14
Use the user interface of the paired MILUX-RF HYGROSTAT if parameter #0 Type=Rev ....................... 14
Use Input 1 parameter #11 In1=HC or Input 2 parameter #12 In2 =HC (See Chap 5.4.7 and Chap 7.1) . 14
6.2 Types of operating modes ........................................................................................................................... 14
6.3 Program Mode ............................................................................................................................................. 16
7 System Parameter Menu ............................................................................................................................ 18
7.1 System parameters setting ......................................................................................................................... 18
7.2 Heating & Cooling curves ............................................................................................................................ 24
7.3 Corresponding value for sensors. ............................................................................................................... 24
8.Technical Data / Materials ............................................................................................................................................. 24
9. TROUBLE-SHOOTING ............................................................................................................................... 25
2

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Watts Climatic Control Heating and Cooling bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Watts Climatic Control Heating and Cooling in de taal/talen: Engels als bijlage per email.

De handleiding is 2.88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info