Page 4 of 13
6. Installation
Fix the JUST ONE to the front fork stem and then attach
the N3-button to JUST ONE and adjust to an appropriate
visual angle. Ensuring the power is off and match display
connector with controller connector.
7. Operation
7.1. Power On/Off
Press and hold M for several seconds to toggle the power
on or off to both the display and controller. While the
power is off, the display will no longer consume power
with a leakage current is less than 1uA.
The bike will be shut down automatically if it is left
idle for 10 minutes.
7.2. Selecting Speed Mode(Speed/Trip/ODO)
On turning on the display the default mode is current
speed. Pressing M will cycle through the other modes in
the order of: current speed→Single trip→ODO. If the
current speed is over 0 km/h, after 2 seconds the mode will
return to Current speed.