PREPARING FOR FIRST USE
Unpack the dehydrator
Take the Wartmann® dehydrator out of the box and remove all packaging materials. Position
the Wartmann® dehydrator near an electric connection, on a stable horizontal surface, in a
place where the Wartmann® dehydrator can’t fall or be knocked over.
Place the trays
The Wartmann® dehydrator comes with 10 stainless steel trays and a dripping tray. Open the
door and place the 10 trays by sliding them in the guide rails on both sides. Place the dripping
tray at the bottom. Make sure that the end of the trays are clear and that nothing is between
the tray and the ventilator at the back.
Connect the power cable
The Wartmann® dehydrator comes with a detachable power cord. Plug the connector of the
power cord in the socket on the backside of the Wartmann® dehydrator. Now plug the power
plug in the wall socket.
Switch the dehydrator on
The Wartmann® dehydrator has a main (red) power switch at the back. Press the power switch
to switch the dehydrator on. The power switch lights up and the control panel shows the text
“OFF”.
The dehydrator is now ready for use.
