78307
12
Verklein
Vergroot
Pagina terug
1/90
Pagina verder
12
G
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Feed cable through the strain relief
z Please feed cable through the strain relief.
Connecting to the mains (230 Volts, A.C., 50 Hz)
z The mower operates from any normal household mains sup-
ply, provided with a 16 Amps. fuse.
3 Note: Residual current protection device
These protection devices safeguard while touching
damaged wires, from insulation flaws and in certain cases,
also while damaging live wires.
z We recommend that the equipment only be plugged into
a power socket, which is protected by a residual current
protection device (RCD) with a residual current of not
more than 30 mA.
z Retrofit kits are available for old installations. Consult an elec-
trician.
Adjust operating depth
Only with motor switched off and non-mowing aeriating roller. The
operating depth must be adjusted to the corresponding grass and
ground conditions.
z Move operating lever towards front (1).
z
Increasing the working depth (cutters towards the
ground) (1)
Turn the handwheel "Working Depth Adjustment" to the
right
z
Reducing the working depth (2)
Turn the handwheel "Working Depth Adjustment" to the left.
(One turn = 1.5 mm working depth)
3 Aeriating test:
z Pull operating lever up again (2)
z Start tool
z Push operating lever slowly forward (1)
z Move tool slowly into operating direction
z On hearing stones being hit or blocking of the motor im-
mediately switch off tool
z Turn rotating handle 1–2 rotations towards the left
(2).
z Start aeriating test again
z When used regularly the aeriating depth may be adjusted ac-
cording to the wear of the blade (+).
Recommended working heights
z well kept lawns with stone-free, soft ground
Set tool exactly to ground height
z stony, untidy lawns
Set tool to ground height
Increase working height if stones are thrown up
z unkempt, extremely mossy lawns
Start with a high working height
Do not overload appliance (reduce working height if motor
blocks)
Cut vertically and crossways several times
Re-saw with WOLF-Garten >>Loretta<< lawn seeds
Scarifying
1. Depress button (1) and hold.
2. Lift up bar (2) and release button
(1).
3. Place lever (1) slowly into forward position.
4. Switch-off motor: Release bar
(2).
1 Important:
Place the cable firmly off the lawn or on the already cut side
of the lawn when starting to mow.
3 Turning (UV 32 EV / UV 34 E)
The cable relief holder enables you to move the cable from one
side of the handle frame to the other. Thus you ensure that the
cable always trails on the ride of the lawn already cut – and not
in front of the machine .
Maintenance
General
1 Attention! Rotary cutter blade
Before all maintenance and cleaning work:
z pull out the power plug.
z Do not touch running blades.
Cleaning
z Clean the unit thoroughly with a brush after each use.
z Do not spray with water.
z Store unit in a dry room.
3 We recommend
Allow a WOLF-Garten-service centre to check the unit in the au-
tumn.
J
K
L
L
K
N
K
L
N
N
N
K
N
M
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw WOLF-Garten UV 32 EV bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van WOLF-Garten UV 32 EV in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Turks, Deens, Zweeds, Noors als bijlage per email.

De handleiding is 1,75 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info