638677
12
Verklein
Vergroot
Pagina terug
1/42
Pagina verder
12
G
z For safety reasons replace worn out or damaged parts.
z NOTE! Always have blades replaced or sharpened by a
WOLF-Garten Service Centre, as a blade balance test must
be performed in accordance with safety regulations and the
blade retaining bolt must be tightened to a specified torque.
z Wear suitable work gloves when carrying out the above work,
especially when handling the blade.
Assembly
Fixing of handle
1 ATTENTION! Take care that the switch cable does not
become caught and crused when folding the handle
frame.
1. Fold the handle bar toward the back .
2. Set the handle to the desired height and tighten the two wing
nuts
.
3. Fold the upper handle up and screw it tight with the two wing
nuts .
Mount grass catcher
z See illustrations.
Operation
Operating times
z Please check noise abatement regulations prevailing in your
country.
Starter cord assembly
1. Lift and hold operator presence bail arm (2).
2. Pull the starter rope slowly to the holding bracket.
3.
Twist the cord through the holder .
3 Always remove the starter cord from the holder before
folding the mower handles.
Oil Fill
1 Check oil level with mower standing on level ground.
Fill crankcase with quality oil SAE 30 up to the mark „Full“
on dipstick. (Do not overfill.) Capacity approx. 0,6 litre.
Screw in dipstick according to illus.
Filling with fuel
1 Caution! Rotating blades
Settings only to be carried out on the machine with the mo-
tor switched off and with the working tools at a standstill.
z Use only normal lead-free petrol (not Super unleaded).
z Avoid spilling petrol.
z Do not inhale the vapour.
Hang up collection bag
1 Attention! Rotary cutter blade
Undertake adjustments on the equipment only after the
motor is switched off and the cutting tool has come to a
standstill.
1. Lift the protective flap.
2. Hang the grass bag in the chassis with the hooks in the reces-
ses (see arrow).
3. Replace the protective flap.
Set cut height
1 Attention! Rotary cutter blade
Undertake work/adjustments on the equipment only after
the motor is switched off and the cutting tool has come to a
standstill.
1. Place hand into handle bar and depress button (1).
2. Lift or lower chassis until it engages into required position (2).
Selection of Cutting height
z If possible, mow when grass is dry in order to protect turf. Do
not se cutting position too low when mowing very hight or wet
grass.
z We recommend an average cutting height of 40-50 mm.
Start
z On a flat surface, if possible not in high grass.
1. Throttle lever (1) to “Betrieb” (= running).
2. Raise and hold the safety bracket (2).
3. Pull starter grip and return it slowly by hand.
Wheel drive (Power Edition 40 BA, Power Edition 46 BA)
z Wheel drive on: Raise drive bracket (3).
z Selecting the speed (Vario)
Press button (4)
Use the lever (5) to select the desired working speed (2.5
km/h - 5.0 km/h).
Rabbit: faster. Snail: slower.
z Wheel drive off: Relapse drive bracket (3).
Stop Motor
z Release safety bracket (2).
3 If the motor does not start in cold weather, press the
primer.
A
B
A
A
B
C
D
E
F
G
H
J
K
L
M
H
H
J
H
H
H
12

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw WOLF-Garten Power Edition 46 B bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van WOLF-Garten Power Edition 46 B in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Turks als bijlage per email.

De handleiding is 1,39 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info