1. Heading lock switch: the heading lock function is entirely the
same as the headless and care free functions. With this switch
you can fly out of your own perspective instead of the
perspective of the copter. Activate this switch while the copter is
on the ground directly in front of you, and pointing away from
you.
2. Return switch: the return switch is also known as the return to
home function. When activating this switch your copter will fly
upwards to a pre-programmed height and will fly back to its
initial position on which it activated its GPS.
3. Throttle: the joystick on the left is called the throttle. Pushing
it forward will increase the height of the model. Pulling it down
will decrease the altitude. Moving the stick to the left and right
will rotate the copter around its directional axis (yaw).
4. Lever: the joystick on the right is referred to as the lever. It
allows for movement of the copter on the horizontal plane. With
the direction out of the perspective of the copter.
5. On camera: moves the camera up, if a gyro is connected.
6. Under camera: moves the camera down, if a gyro is
connected.
