Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
The unit does not cool enough:
Make sure that the unit is not in direct sunlight.
Make sure that no windows or doors are open.
Is it possible that there are too many heat sources in the room? Please consider that every person, every
window exposed to sunlight and every electrical appliance produces heat and therefore the cooling capacity of
the air conditioner may no longer be effective enough.
Make sure that the filter is not dirty and is sufficiently permeable to air.
Make sure that the air intake, the exhaust air and the exhaust air duct for the warm air are not blocked and
have sufficient free space.
Check whether the room temperature is perhaps already below the selected target temperature.
The unit seems too loud to me:
Check that the unit has a firm stand with all four castors and is not uneven. Quieter operation is achieved if the
air conditioner is placed on a carpet or a piece of floor mat. Furthermore, a short exhaust hose for the warm air
in the room is advantageous.
In the event of a defect, do not attempt to repair the air conditioner yourself!
Technical data:
Model designation: WDH-FGA1372
Energy efficiency rating (EER): A
Energy consumption per hour according to EER: 1.38 kW/h
Cooling capacity: 13,000 BTU/h (3,800 watts)
Energy efficiency ratio (EER): 2,6
Unit type: Cooling only
Cooling type: Air cooling
Noise emission: 65 dB(A)
Voltage: 220-240V ~ 50Hz
Max. Power consumption: 1,380 W (6.2 A)
Power consumption in operating mode
"Temperature controller off" (PTO): 172 W
Power consumption in standby mode (PSB): 0,5 W
Electricity consumption (QSD): 1.38 kWh/a
Air circulation: 450 m³/h
Dehumidification capacity: 1.7 litres/h
Range of use: 18°C - 32°C
Compressor: Rotary compressor
Refrigerant: R290 (300 g)
Dimension (H/W/D): 790 x 415 x 418 mm
Dimension hot air duct: Ø 150 x 1500 mm
Intake pressure: 0.85 Mpa
Discharge pressure: 2.2 Mpa
Weight: 31 kg
The above data have been determined in accordance with EU standard: EN 14511, as well as EU safety and test regulations: EN 60335-2-40.
COOLING - dry temperature = 35°C; wet temperature = 24°C
Fuse: F10AL250V or T10AL250V
