Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: Info@Aktobis.de
Operating recommendations:
For good cooling results and for the most effective and economical operation, we give you the following
recommendations:
We recommend a room size of up to 40 m² (100 m³) for this air conditioner.
The minimum size of the room in which the unit is to be operated is at least 13m3 !
Lock windows and doors.
Avoid direct sunlight into the room through windows and doors. It is best to close the shutters or curtains
during the day.
Keep the air filters of the air conditioner clean.
Once you have reached the desired room temperature, reduce the operating strength of the air conditioner.
Set-up and connection:
1. connecting the exhaust hose for the warm air
The mobile air conditioner generates warm air for cooling the room. This warm exhaust air must be discharged to
the outside. You can either discharge the warm exhaust air outside through a suitable hole (with the recommended
diameter of 142 mm) in the wall (similar to a kitchen extractor bonnet) or through a gap of an open window/door.
Note: Depending on the given conditions, it may be advantageous to use the closure strip provided for this
purpose. The closure strip is variably adjustable and can thus ensure that no air from outside gets inside.
1.1. Connect the warm air exhaust hose to the rear exhaust duct of your air conditioner by screwing the warm
air hose on clockwise.
1.2. If necessary, attach the supplied adapter to the other end of the exhaust air hose.
1.3. Lead the exhaust air hose directly through the window gap/door gap to the outside so that the warm
exhaust air can be blown out unhindered.
1.4 If you have installed the sealing strip on the window gap/door gap/wall, guide the exhaust air hose from the
inside through the recess provided and then screw the adapter onto the exhaust air hose from the outside.
Now the adapter can be connected to the sealing strip.
1.5. When the air conditioner is not in use, close the end / adapter of the exhaust air hose with the adapter
cover.