Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
2. Emptying the collection tank / When the "Condensation tank full" signal LED lights up
When the condensation tank is full, the signal light (FULL) lights up and the
dehumidifier then automatically stops its dehumidification operation. Carefully remove
the condensation tank with both hands and empty it (preferably over a bathtub or large
sink). After you have pushed the condensation tank neatly back into the unit, the
dehumidification operation will restart automatically within a few seconds (max. 1
minute).
3. Connecting a hose (optional)
3.1. You need a 1/2 inch (diameter 12 - 13 mm) plastic hose.
3.2. The connection point for the drain hose is located on the right rear of the dehumidifier.
(normal water drain above the condensation tank).
3.3. Remove the condensation tank.
3.4. Guide the appropriate hose onto the water drainage tap and make sure that the hose is firmly seated.
3.5. Now push the water tank back into its normal position. Make sure that the hose is routed through the small
opening provided for it on the right above the condensation tank and that everything is properly seated and that
no water can leak out at the connections (see fig. 1).
3.6. Proper drainage of the condensation water when connecting the hose ! Make sure that the hose always has a
slight slope (see fig. 2 and fig. 3).
3.7. At cold operating temperatures, it is not advisable to connect a hose, as the condensate may freeze in the hose
and thus cause a blockage !
