Aktobis AG, Borsigstr. 20, D-63110 Rodgau / Germany
www.AKTOBIS.de
Email: info@aktobis.de
2. Emptying the collection tank / When the "Condensation tank full" light is on
When the condensation tank is full, the signal light lights up and the dehumidifier then
automatically stops its dehumidification operation. Remove the condensation tank and
empty it. After you have pushed the condensation tank neatly back into the unit, the
dehumidification operation starts again automatically.
3. Connecting a hose
3.1. You need a 3/4 inch plastic hose.
3.2. The hose connection is closed by a cover. Unscrew this cover and remove the screw cap and the black rubber
plug inside (see illustration below).
3.3. Now guide the plastic hose onto the black drip tap provided. Push the hose as far as possible onto the drip tap
and make sure that the hose is tight and cannot come loose.
3.4. Proper drainage of condensation water with hose connection ! Make sure that the hose always has a slight
slope (see the following diagrams).
