540498
4
Verklein
Vergroot
Pagina terug
1/9
Pagina verder
HS
RIFLESCO PE
7 6
Select Viper HS riflescopes use a side focus adjustment which provides
maximum image sharpness and eliminates parallax error. The Viper HS
2.5–10x44 riflescopes do not use side focus adjustments and are pre-focused
at a distance of 100 yards.
Using the Side Focus
1. Be sure the reticle is correctly focused (see Reticle Focus on page 5).
2. Turn the side focus knob until the
target image is as sharp as possible. The
yardage numbers referenced on knob
should closely match the actual yardage
to the target.
3. Check for parallax error by moving
your head back and forth while looking
through the scope. The focus is correct if
there is no apparent shift of the reticle on the target. If you notice any
shift, adjust the focus knob slightly until all shift is eliminated.
Setting the side focus:
Parallax is a phenomenon that results when the target image
does not quite fall on the same optical plane as the reticle
within the scope. When the shooter’s eye is not precisely
centered in the eyepiece, there can be apparent movement of
the target in relation to the reticle, which can cause a small
shift in the point of aim. Parallax error is most problematic
for precision shooters using high magnification.
The Viper HS riflescope incorporates adjustable elevation and windage
turret dials with audible clicks. Each audible click moves the bullet’s point-
of-impact 1/4 of a minute of angle (MOA).
1/4 MOA closely corresponds to 1/4 inch at 100 yards, 1/2 inch at 200
yards, 3/4 inch at 300 yards—taking four (4) clicks to move the bullet’s
point-of-impact approximately one inch at 100 yards.
Windage and Elevation Adjustments
Note: After sight-in, you can re-align the zero marks on the turret dials
with the reference dots if you wish (see Indexing Adjustment Dials with
Zero Reset on page 12). Replace outer covers when done.
1. Remove the outer covers.
2. Turn the turret in the appropriate
direction: Up/Down or Left/Right as
indicated by the arrows.
3. Following the directional arrows, turn the
dials in the direction you wish the bullet’s
point-of-impact to go to.
To make adjustments:
Variable Power Adjustments
To change the magnification,
turn the magnification ring to the
desired level. The Vortex fiber
optic magnification indicator will
provide a low light reference for
magnification level.
Magnification
Scale
MagView
Indicator
Elevation Turret Dial
Windage Turret Dial
Adjust the side focus knob
4

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vortex VIPER HS Riflescope bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vortex VIPER HS Riflescope in de taal/talen: Engels als bijlage per email.

De handleiding is 4,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info