540497
5
Verklein
Vergroot
Pagina terug
1/11
Pagina verder
HS LR
RIFLESCO PE
Viper HS LR riflescopes use a side focus adjustment which provides
maximum image sharpness and eliminates parallax error.
Using the Side Focus
1. Be sure the reticle is correctly
focused (see Reticle Focus on page 5).
2. Turn the side focus knob until the
target image is as sharp as possible.
The yardage numbers referenced on
knob should closely match the actual
yardage to the target.
3. Check for parallax error by moving
your head back and forth while looking
through the scope. The focus is correct if there is no apparent shift of
the reticle on the target. If you notice any shift, adjust the focus knob
slightly until all shift is eliminated.
Setting the side focus:
Parallax is a phenomenon that results when the target image
does not quite fall on the same optical plane as the reticle
within the scope. When the shooter’s eye is not precisely
centered in the eyepiece, there can be apparent movement of
the target in relation to the reticle, which can cause a small
shift in the point of aim. Parallax error is most problematic
for precision shooters using high magnification.
Adjust the side focus knob
Customizable Rotational Stop (CRS)
Viper HS LR riflescope elevation turrets incorporate the unique CRS
rotation stop feature. After the rifle is sighted in, the design of the
CRS allows a shooter to quickly and easily return to an original zero
point when using the elevation turret to dial-in temporary bullet drop
corrections.
The CRS feature is particularly useful when dialing large multi-revolution
elevation corrections. Without this feature, the shooter must pay very
careful attention when dialing these large corrections. If the shooter loses
track of the number of revolutions, the original zero point may become
lost when returning the adjustment. Viper HS LR riflescopes equipped
with the CRS allow the elevation dial to be quickly spun back to original
zero without having to carefully count revolutions or clicks.
Once the CRS shims are installed after sight-in, the elevation dial will
stop turning shortly past the original zero point when being returned
(turning clockwise direction) from a temporary elevation adjustment.
The shooter can then turn the elevation knob a partial turn in a counter-
clockwise direction until the zero reference and radius bar are correctly
aligned—achieving the original zero point.
CRS Shims
See CRS shim installation
in the Bore Sighting and
Final Range Sight-in sections
on pages 12–13 for more
information.
9 8
5

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vortex VIPER HS LR Riflescope bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vortex VIPER HS LR Riflescope in de taal/talen: Engels als bijlage per email.

De handleiding is 0,46 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info