764122
8
Verklein
Vergroot
Pagina terug
1/48
Pagina verder
8
EN
WWW.VONROC.COM
4. OPERATION
If the vacuum cleaner accidentally tips over,
the shut-off float (20) mechanism may
cover the motor vacuum port and stop the
suction. If this happens, simply stand the
vacuum upright and turn it off until the float
(20) returns to its normal position.
Switching on (Fig. A):
Do not vacuum without a filter!
1. Fully unwind the suction hose (11).
2. Connect the mains plug.
3. Press the power switch (1) into the “ ON/1”
position to start your vacuum cleaner.
Switching off (Fig. A):
Press the power switch (1) into the “ OFF/0” posi-
tion to switch off your vacuum cleaner.
Dry vacuuming (Fig. A, C - F)
Shake and prod the cloth filter (17)
regularly to maintain the suction power.
To avoid the cloth filter (17) becoming
clogged, we recommend the additional use
of a dust collection bag (16).
Fine dust, such as dust from cement, soot
and plaster are too fine to be used with only
the cloth filter (17) and risk getting into the
motor and damaging it. Therefore we
strongly recommend a dust collection bag
(16) when cleaning these types of
materials.
Clogged dust collection bag (16) can burst
- therefore make sure to replace the dust
collection bag in a timely manner!
1. Switch off (1) the machine and remove the
mains plug from the mains.
2. Unlock the locking clamp (6) and remove the
top section (10).
3. Before vacuuming, remove all dirt and debris
from the container (9).
4. Carefully slide cloth filter (17) down over the
filter cage (21) making sure the whole cage
(21) is covered as shown in Fig. C-1.
5. For vacuuming with dust collection bag (16):
Hold the cardboard collar tightly and slide
the rubber protective element as far as
possible onto the intake port (19) as shown
in Fig. D.
When everything is in place, unfold the bag
(16) out and position it around the inside
walls of the container (9).
6. Reattach the top section (10) again and lock
the locking clamp (6).
7. Insert one end of the hose (11) into the vacu-
uming port (3). Fully unwind the suction hose
(11).
8. Connect the mains plug.
9. Press the power switch (1) into the “ ON/1”
position to start your vacuum cleaner.
10. The machine now is ready to use for dry vacuum
cleaning.
11. Press the power switch (1) into the “ OFF/0”
position to switch off your vacuum cleaner.
Wet vacuuming (Fig. A, C, E - G)
The vacuum cleaner is equipped with a float
(20). The suction power decreases when
the maximum filling level is reached. Switch
the vacuum cleaner off (1) immediately.
Remove the plug from the socket and
empty the container (9).
Clean the float (20) at regular intervals, and
check it for damage. Otherwise, its function
can be impaired.
Never reach into the water to be suctioned
up. Danger of electric shock.
Immediately switch (1) the machine off if
foam forms or liquids escape!
Do not use a dust collection bag (16)!
1. Switch off (1) the machine and remove the
mains plug from the mains.
2. Unlock the locking clamp (6) and remove the
top section (10).
3. Before wet vacuuming, remove the dust collec-
tion bag (16), the cloth filter (17) and remove all
dirt and debris from the container (9).
4. Carefully slide foam filter (18) down over the
filter cage (21) making sure the whole cage
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc VC502AC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc VC502AC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 6,36 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info