778574
8
Verklein
Vergroot
Pagina terug
1/60
Pagina verder
8
EN
WWW.VONROC.COM
step/rung throughout the task.
Avoid work that imposes a sideways load on
ladders, such as side-on drilling through solid
materials (e.g. brick or concrete).
In the leaning ladder position it is not allowed to
climb higher than last metre of the ladder.
The user shall put the hands around the stile
when bringing the ladder from extended to
storage position.
Do not stand on the top four rungs on the lad-
der; this can cause stability issues.
Do not use the ladder as a bridge.
Leaning ladders used for access to a higher
level should be extended at least 1m above the
landing point.
Do not step off a leaning ladder at a higher level
without additional security, such as tying off or
use of a suitable stability device.
Do not step off the side of the ladder.
Do not spend long periods of time on a ladder
without regular breaks (tiredness is a risk).
Take care when closing the ladder to not catch
any fingers, clothing or hair in the mechanisms.
Close one rung at a time.
2. PRODUCT INFORMATION
Intended use
The Telescopic Ladder is designed and intended
for domestic use, as a climbing aid in home and
garden environments and for hobby purposes. This
ladder is not a toy. Children should be supervised at
all times to ensure they do not play with the ladder
system. This ladder is not developed for professi-
onal use. The Telescopic Ladder must be handled,
cared for and maintained in accordance with these
instructions. Any other use is deemed improper and
may result in damage to property, personal injury
or even death. The ladder complies to the norms of
EN131, 96-333 and Warenwet.
TECHNICAL SPECIFICATIONS
Model No. TL502XX
Length, extended 3.8 m
Length, retracted 91 cm
Maximum permissible load 150 kg
Number of treads 13 treads
Inclination angles 65°–75°
Maximum number of users 1 user
Weight 13.1 kg
DESCRIPTION
The numbers in the following text refer to the pictu-
res on page 2-4.
1. Top Bar
2. Telescopic Tubes
3. Handle
4. Storage Strap
5. Bottom Rung
6. Locking Mechanisms
7. Hand Grips
8. Retract levers
9. Stabiliser Bar
3. ASSEMBLY
The Stabiliser Bar must be fitted before use.
NEVER use the ladder without the Stabiliser
Bar.
Take care during assembly that the ladder
does not fall over. If necessary, get
assistance from a second person.
Mounting the stabiliser bar (Fig. A, B)
Flip the Telescopic Ladder vertically so that the
feet are accessible. You will notice plastic pins in
the slot on each foot. In order to fit the Stabiliser
Bar (9), these pins will need to be snapped. This
can be done easily using a flathead screwdriver.
Once the pins have been snapped and removed,
the Stabiliser Bar (9) will fit into the slots. You will
need to line up the holes on the Stabiliser Bar with
the holes on the legs of the Telescopic Ladder.
NOTE: You may need a rubber hammer to care-
fully tap the Stabiliser Bar into the slots securely.
With the Stabiliser Bar (9) slotted onto the feet
of the Ladder, secure into place using the 2 bolts
and nuts provided, as shown on figure B. Tighten
with a wrench to secure.
4. OPERATION
Before using the ladder, always observe the
safety instructions and obey the relevant
regulations.
Opening the ladder to intermediate length
(Fig. A, C, D)
The telescopic ladder will automatically engage the
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc TL502XX bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc TL502XX in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks als bijlage per email.

De handleiding is 16.04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info