764218
10
Verklein
Vergroot
Pagina terug
1/88
Pagina verder
EN
10 WWW.VONROC.COM
20. Mode selector I / O / II
21. Controle panel + / “PSI/BAR/KPA” / -
22. Inflator connection machine
23. Nubs
24. Notches
25. Deflate connection machine
26. Switch worklight
27. Battery indication button
28. Display
29. 12V Cigarette lighter plug
30. storage for cigarette lighter plug
31. Battery LED indicators
32. Battery LED indicators button
3. OPERATION
First use (Fig. A)
Do not operate the device in dusty
environments. Doing so poses a fire hazard
and could damage the device.
To prevent overheating while inflating, keep
the air intake and vents clear of obstructi-
ons. Always wear EN-approved eye
protection during use.
Place the product on a even, nonflammable surfa-
ce. Depending on the inflatable or the tyre you can
use high or low pressure. High pressure setting is
best to be used when pre-set is needed; preset the
desired pressure and the machine will automatical-
ly stop at the set pressure.
Low pressure setting is best to be used for inflating
and deflating larger inflatables.
Depending on the tyres you can use the high
pressure connection valve (8) directly or along
with one of the included valve adapters (16, 17,
18)
For balls (high pressure) use valve adapater for
balls (15)
For high pressure inflatables with a small valve
use the extra small valve adapter (14)
Depending on the inflatable you can use the
Low pressure connection (11) directly or along
with one of the included hose adapters (13)
For inflatables with counterpressure (e.g.
partly filled car tyre): Switch on the product
before connecting the High pressure
connection valve (8) to the tyre.
This product is not suitable for continuous opera-
tion. It was developed to produce air pressure, not
air volume. Do not use the product for longer than
10 minutes without interruption to prevent overhe-
ating and damage to the device. Afterwards allow
to cool for a minimum of 10 minutes.
When device is not in use for 3 min, it will automa-
tically go in to sleep mode. While in sleep mode the
LED light can not be used.
The battery must be charged before first
use.
for 20V battery use:
Removing the battery from the machine (Fig. B1)
Push the battery unlock button (3) and pull the
battery out of the machine.
Inserting the battery into the machine (Fig. B1)
Ensure that the exterior of the battery is
clean and dry before connecting to the
charger or machine.
Insert the battery (2) into the base of the machine.
Push the battery toward the battery connector
until it clicks into place.
When the machine is not being used over a
longer period of time it is best to store the
battery in charged condition.
The appliance vibrates during operation.
During operation, always makes sure the
machines is placed on its rubber feet.
Checking the battery charging status (Fig. B2)
To check the battery charge status, push the
button (32) on battery shortly.
The battery has 3 lights indicating the charge
level, the more lights that burn, the more charge
the battery has left.
When the lights are not burning it means the bat-
tery is empty and must be charged immediately.
Charging the battery with the charger (Fig. B2)
1. Take the battery (2) from the machine.
2. Turn the battery (2) to upside down position and
slide it onto the charger (5) as shown in Fig. B2.
3. Push the battery until it is fully pushed into the
slot.
10

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc S-CDR03DC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc S-CDR03DC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Turks als bijlage per email.

De handleiding is 8,04 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info