819197
9
Verklein
Vergroot
Pagina terug
1/96
Pagina verder
EN
9
WWW.VONROC.COM
Fully charging the 2Ah battery may take up to
60 minutes.
Fully charging the 4Ah battery may take up to
120 minutes.
After the battery is fully charged remove the charg-
er plug from the outlet and remove the battery from
the charger.
When the machine is not being used over
alonger period of time it is best to store the
battery in charged condition.
4. OPERATION
Connecting the watersupply
This unit is to be used with acold-water
source only!
The pressure washer must only be used
with clean water; use of unfiltered water or
corrosive chemicals will damage the
pressure washer.
Ensure that you have asuitable water
supply to feed the pressure washer. Check
that all connections are tight and there are
no leaks in the hose.
You can enable the water supply via awater tank
(or pond, rain barrel, etc.) or via awater tap.
Water tank (water suction function) (Fig. E1)
Clean the suction filter (9) at regular
intervals, and check it for damage.
Otherwise, its function can be impaired.
When water is supplied via awater tank, pond, rain
barrel, etc. , the assembled suction hose (7) must
be used. Only clear fresh water may be used.
1. Connect the assembled suctionhose (7) to the
pressure washer, place the hose connector (5)
on to the water inlet (4).
2. Lower the suction filter (9) into water. Ensure
there are no obstructions around the suction fil-
ter (9). Move the float ball (8) in such away that
the suction filter (9) does not touch the water
bottom. The suction filter (9) must be placed at
least 20 cm from the water bottom to prevent
the suction of sand. When using awater tank,
rain barrel or bucket, you can secure the hose
by using the bucket clamp (12).
3. Check that the hose has no kinks in it.
4. The pressure washer is now ready for use.
Water tap (Fig. E2)
Use the device on adomestic water
connection with maximum pressure of
5bar.
The supply tap should be fully open.
1. Ensure that you have asuitable water supply to
feed the pressure washer.
2. Connect the water supply hose (not included) to
to the water inlet (4).
3. Connect the water supply hose (not included) to
the water supply.
4. Turn on water and heck that the hose has no
kinks in it.
5. The pressure washer is now ready for use.
Switching the pressure washer on/off (Fig. A)
The motor of this pressure washer will NOT
run. It will only operate when the trigger is
squeezed.
Before starting make sure the pressure
washer is connected to awater source. Dry
running will damage the pressure washer!
To start the pressure washer, press and hold the
release button (11) and press the switch lever
(10).
To stop the pressure washer, release the switch
lever (10).
Adjusting the nozzle (Fig. F)
Water may be sprayed out of the nozzle (3) either
linearly or in afan shape. Turn on the pressure first,
and then adjust the nozzle (3).
Using detergents (Fig G, A)
The detergent bottle (13) will allow you to apply
many forms of liquid detergent onto the work
surface.
1. Remove the detergent dispenser of the deter-
gent reservoir and fill with liquid detergent only.
Do not put any water into the reservoir. The de-
tergent bottle (13) will mix water and detergent
automatically.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc PW508DC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc PW508DC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 11.87 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info