778563
7
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
EN
7
WWW.VONROC.COM
The universal tool stand is also designed as a work-
piece support when working with mitre saws, scroll
saws, circular table saws, and other similar electric
power tools. The maximum workpiece length is
3m. Additional workpiece supports may have to be
used (e.g. a roller trestle) in order to prevent longer
workpieces tilting. Attention: Ensure that the work-
piece support is secure and not tilted!
TECHNICAL SPECIFICATIONS
Model No. MS806AA
Max. permissible load 150kg
Opened dimensions
L: 1185-2000mm
W: 632mm
H: 900-1000mm
Closed dimensions 1380x474x301mm
Weight 24.9 kg
DESCRIPTION
The numbers in the following text refer to the pic-
tures on pages 2-5.
1. Roller
2. Workpiece support
3. Workpiece support knob
4. Extension arm
5. End stop
6. Extension arm knob
7. Mitre saw mounting bar
8. Carrying handle
9. Frame
10. Pin slot
11. Locking lever
12. Leg
13. Foot
14. Mounting bar lever
15. Mitre saw mounting hardware (bolts, washers,
spring washers, nuts)
16. Wheels
17. Axle bracket
18. Bolts for handle
19. Retaining rings for wheels
20. Bolts for axle bracket
21. Washer for axle bracket and handle
22. Spring washer for axle bracket and handle
23. Nut for axle bracket and handle
24. Adjustable foot
25. Material support
26. Adjustable nut
3. ASSEMBLY
Study each figure and identify the
components required with reference to the
contents table above.
Attaching the wheels (Fig. A, B)
1. Lay the mitre saw stand on the floor with the
folded legs (12) facing upwards.
2. Mount the axle bracket (17) onto the frame (9)
using the bolts (20), washers (21), spring wash-
ers (22) and nuts (23) as shown on figure A.
3. Now slide the wheels (16) onto the axles of the
axle bracket (17) as shown on figure B. Note:
raised hub goes on the inside.
4. Secure the wheels (16) by attaching the retain-
ing rings (19) onto the axle ends of the axle
bracket (17).
Attaching the handle (Fig. C)
Mount the handle (8) onto the frame (9) using the
bolts (18), washers (21), spring washers (22) and
nuts (23) as shown on figure C.
Unfolding The Stand (fig. D)
1. Lay the mitre saw stand on the floor with the
folded legs (12) facing upwards.
2. Depress the locking lever (11) and unfold the
two upper legs (12) until the spring-loaded pin
(11) clicks into the pin slot (10).
3. Repeat the same procedure for the other two
legs.
4. Lift the stand and flip it into the upright position.
5. Check that the stand is stable and all of the leg
locking pins have engaged properly.
Folding The Stand
One pair of legs on the stand must fold firstly for
the stand to fold flat. The legs have not folded into
place if the locking levers (11) do not pop into place.
The legs should not swing about when the stand is
picked up if the legs have locked into position.
1. Turn the mitre saw stand upside down on the
floor with the legs (12) sticking up.
2. Depress the spring-loaded pin (11) on the lower
pair of legs and fold them in.
3. Repeat the same procedure on the other pair of
legs.
7

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc MS806AA bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc MS806AA in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 8.74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info