778592
9
Verklein
Vergroot
Pagina terug
1/84
Pagina verder
EN
9
WWW.VONROC.COM
4. OPERATION
Before using, always visually inspect to see
that the blades, blade bolts and cutter
assembly are not worn or damaged. Please
keep power switched off and disconnect the
power supply. Replace worn or damaged
blades and bolts in sets to preserve balance.
If the machine starts to vibrate abnormally
(check immediately):
- inspect for damage,
- replace or repair any damaged parts,
- check for and tighten any loose parts.
Immediately switch of the machine in the
following cases:
- whenever you leave the machine,
- before clearing blockages or unclogging
chute,
- before checking, cleaning or working on
the machine,
- after striking a foreign object. Inspect the
machine for damage and make repairs
before restarting and operating the
machine;
Put the machine on a solid and even
surface at all times. Never tilt or move the
machine when the engine is running.
Switching the machine on/off
Never attempt to put your hand inside the
feeder hopper (1). If you want to push
material into the cutting chamber use the
push stick (8).
Before starting the machine attach the collec-
tion bag (6) to both hooks of the housing.
To start the machine, press the ON switch (10).
As a safety feature, the shredder will not start un-
less the hopper securing knob is fully tightened.
To stop the machine, press the OFF switch (10).
Working instructions
Branches and pruning waste become harder to
shred depending on the type age and dryness
of the wood. Best results are obtained by shred-
ding fresh, soft cuttings with dry branches.
The suitability of the shredder for cutting
garden waste which is soft and contains large
amounts of sap (e.g. pomaceous fruit, wet
plant waste) is limited. This material should be
composted straight away.
When shredding thick branches, only apply
slight pressure to prevent blocking the shredder.
Always allow the machine to cool down before
storing.
Replace worn or damaged parts for safety.
Use only genuine replacement parts and
accessories.
Restart protection
This protection prevents accidental machine start
after power failure. When power is restored, turn
on the machine again.
Overload protection
If the machine is exposed to a high load (e.g.
cutting cylinder is blocked), it will stop after a few
seconds. Turn OFF the power and remove the plug.
Push the overload protection reset (9) and then
restart it for use.
Blockages
If the machine gets blocked up at any time, switch
it off at the mains and remove the plug from the
power socket. Turn the upper body knob (11)
anti-clockwise until the upper body become loose.
Pull it up and away from you to reveal the inside of
the shredder. Clear any blockages, (be careful not to
touch the sharp blades, replace the upper body and
re-tighten by turning the knob (11) fully clockwise.
5. MAINTENANCE
Always disconnect the machine from the
main power supply before carrying out any
maintenance work.
Your shredder has been designed to operate over a
long period of time with minimum of maintenance.
Continuous satisfactory operation depends upon
proper care and regular cleaning.
Keep the shredder clean and dry.
To clean the shredder, use only mild soap and
a damp cloth. Never let any liquid get inside
the tool and never immerse any part of the tool
into liquid. Do not use any abrasive or solvent -
based cleaner.
9

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc GS502AC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc GS502AC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 8.56 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info