764003
8
Verklein
Vergroot
Pagina terug
1/56
Pagina verder
8
EN
WWW.VONROC.COM
TECHNICAL SPECIFICATIONS
Model No. ET503DC
Recommended charger
adapter
5V D.C. USB
500mA to 1500mA
Type plug side A USB type A
Type plug side B USB type Micro B
Number of staples/nails 30/min.
Staples 6 up to 10 mm
Nails 6 up to 10 mm
Weight ca. 0.66 kg
Sound pressure level L
PA
82.2+3 dB(A)
Sound power level L
WA
93.2+3 dB(A)
Vibration
2.537+1.5 m/s
2
Vibration level
The vibration emission level stated in this instruc-
tion manual has been measured in accordance
with a standardized test given in EN60745; it may
be used to compare one tool with another and as
a preliminary assessment of exposure to vibration
when using the tool for the applications mentioned.
Using the tool for different applications, or with
different or poorly maintained accessories, may
significantly increase the exposure level.
The times when the tool is switched off or when
it is running but not actually doing the job, may
significantly reduce the exposure level.
Protect yourself against the effects of vibration by
maintaining the tool and its accessories, keeping
your hands warm, and organizing your work patterns.
DESCRIPTION
The numbers in the text refer to the diagrams on
pages 2 - 3.
1. Reload lever
2. Cartridge shaft
3. Switch
4. “0/1” switch
5. Top
6. Safety pin
7. Cartridge filling level window
8. Charger cable
9. Charging socket
10. Battery indication light
3. OPERATION
Charging the device (Fig. A)
Plug the charger cable (8) (included) into an
adapter (not included).
Plug the charger cable (8) into the machine.
(Fig. E)
Plug the charger plug into an electrical outlet
and wait for a while. The charger indication
light (10) will lighten up and show the charging
status.
LED Charger status
Red Battery charging in progress.
Green Battery charging finished, battery fully charged.
After the battery is fully charged remove the
charger plug from the outlet and remove the small
plug from the device.
Fully charging the battery may take up to 2-3 hours.
If the red LED charging indicator starts glowing
during operation, this indicates that the battery will
soon be empty.
Application (Fig. B)
For this tool, use one of the following length for
staples or nails:
Staples: 6 up to 10 mm
Nails: 6 up to 10 mm
Loading the nails or staples (Fig. C)
Choose the correct nail or staple for the job.
Hold the tacker with bottom upwards.
Open de cartridge shaft (2) by slightly pressing
the reload lever (1).
Pull the reload lever backwards to open the
cartridge shaft (2).
For nails:
Place the nails upside down against the left side
of the cartridge shaft (2). The left side also shows
a nail-symbol on the cartridge shaft, see fig.D.
For staples:
Place the staples upside down in the cartridge
shaft (2).
Push the reload lever to fully close the cartridge
shaft.
8

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vonroc ET503DC bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vonroc ET503DC in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Spaans, Pools als bijlage per email.

De handleiding is 5,01 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info