SAFETY
* Option/accessory.
59
Seatbelt tensioner
The car is fitted with pyrotechnic and electric
seatbelt tensioners that can tension the seat-
belts in critical situations and collisions.
Seatbelt tensioner during collision
All the seatbelts are equipped with a pyrotechnic
seatbelt tensioner.
The pyrotechnic seatbelt tensioner tensions the
seatbelt in the event of a collision with sufficient
force in order to more effectively restrain the
occupant.
Seatbelt tensioner during critical
situations
The driver and front passenger seatbelts are
equipped with an electric seatbelt tensioner.
The seatbelt tensioners work together and can
be activated together with the driver support sys-
tems City Safety and Rear Collision Warning. In
critical situations, such as panic braking, sharp
evasive action, driving off the road (e.g. the car
rolls over into a ditch, lifts off the ground or hits
some off-road object), skidding, or risk of colli-
sion, the seatbelt can be tensioned by the seat-
belt tensioner's electric motor.
The electric seatbelt tensioner adjusts the occu-
pant to a better position, reducing the risk of
striking the car's interior and improving the effect
of safety systems, such as the car's airbags.
IMPORTANT
If the passenger airbag is deactivated, the
electric seatbelt tensioner on the passenger
side will also be deactivated.
Resetting the electric seatbelt tensioner
Once the critical situation has passed, the seat-
belt and electric seatbelt tensioner are reset
automatically.
If the belt still remains tensioned:
1. Stop the car at a safe place.
2. Unfasten the seatbelt and then refasten it.
> The seatbelt and electric seatbelt ten-
sioner are reset.
WARNING
Never modify or repair the seatbelts yourself.
Volvo recommends that an authorised Volvo
workshop should be contacted.
If the seatbelt has been subjected to a major
load, such as in conjunction with a collision,
the entire seatbelt must be replaced. Some of
the seatbelt's protective properties may have
been lost even if the seatbelt does not appear
damaged. The seatbelt must also be replaced
if it shows signs of wear or damage. The new
seatbelt must be type-approved and designed
for installation at the same location as the
replaced seatbelt.
Related information
•
Seatbelt (p. 58)
•
Fastening/unfastening a seatbelt (p. 60)
•
Door and seatbelt reminder (p. 61)
•
City Safety (p. 335)
•
Rear Collision Warning (p. 345)
•
Activating/deactivating the passenger air-
bag* (p. 65)
