615869
23
Verklein
Vergroot
Pagina terug
1/436
Pagina verder
W E B E D I T I O N
O W N E R ' S M A N U A L
DEAR VOLVO OWNER
THANK YOU FOR CHOOSING VOLVO
We hope you will enjoy many years of driving
pleasure in your Volvo. The car has been
designed for the safety and comfort of you and
your passengers. Volvo is one of the safest cars in
the world. Your Volvo has also been designed to
satisfy all current safety and environmental
requirements.
In order to increase your enjoyment of the car, we
recommend that you familiarise yourself with the
equipment, instructions and maintenance infor-
mation contained in this owner's manual.
Table of contents
2
* Option/accessory, for more information, see Introduction.
01
01 Introduction
Owner information.................................... 13
Reading the owner's manual.................... 13
Digital owner's manual in the car.............. 16
Recording data......................................... 18
Accessories and extra equipment............ 19
Information on the Internet....................... 19
Volvo ID..................................................... 20
Volvo Car Corporation's environmental
philosophy................................................. 21
The owner's manual and the environ-
ment.......................................................... 23
Laminated glass........................................ 23
02
02 Safety
General information on seatbelts.............. 25
Seatbelt - putting on................................. 26
Seatbelt - loosening.................................. 26
Seatbelt - pregnancy................................ 27
Seatbelt reminder...................................... 27
Seatbelt tensioner..................................... 28
Safety - warning symbol........................... 28
Airbag system........................................... 29
Driver airbag.............................................. 30
Passenger airbag...................................... 31
Passenger airbag - activating/deactivat-
ing*............................................................ 32
Side airbag (SIPS)..................................... 34
Side airbag (SIPS) - child seat/booster
cushion..................................................... 35
Inflatable Curtain (IC)................................ 35
General information on WHIPS (whiplash
protection)................................................. 36
WHIPS - child seats.................................. 37
WHIPS - seating position.......................... 37
When the systems deploy......................... 38
General information on safety mode......... 39
Safety mode - attempting to start the
car............................................................. 40
Safety mode - moving the car.................. 41
02
General information on child safety.......... 41
Child seats................................................ 42
Child seats - location................................ 47
Child seat - two-stage booster seat*........ 48
Two-stage booster seat* - raising............. 49
Two-stage booster seat* - lowering.......... 50
Child seat - ISOFIX................................... 51
ISOFIX - size classes................................ 51
ISOFIX - types of child seat...................... 53
Child seats - upper mounting points........ 55
Table of contents
* Option/accessory, for more information, see Introduction.
3
03
03 Instruments and controls
Instruments and controls, left-hand drive
car - overview........................................... 57
Instruments and controls, right-hand
drive car - overview................................... 60
Combined instrument panel...................... 63
Analogue combined instrument panel -
overview.................................................... 63
Digital combined instrument panel -
overview.................................................... 64
Eco guide & Power guide*........................ 67
Combined instrument panel - meaning of
indicator symbols...................................... 68
Combined instrument cluster - meaning
of warning symbols................................... 70
Outside temperature gauge...................... 72
Trip meter.................................................. 72
Clock......................................................... 73
Combined instrument panel - licenses..... 73
Symbols in the display.............................. 74
Volvo Sensus............................................ 77
Key positions............................................ 78
Key positions - functions at different lev-
els.............................................................. 78
Seats, front................................................ 80
Seats, front - electrically operated*.......... 81
03
Seats, rear................................................. 82
Steering wheel.......................................... 84
Heating* of the steering wheel.................. 85
Light switches........................................... 86
Position/parking lamps............................. 87
Daytime running lights.............................. 88
Tunnel detection*...................................... 88
Main/dipped beam.................................... 89
Active main beam*.................................... 90
Active Xenon headlamps*......................... 92
Rear fog lamp........................................... 92
Brake lights............................................... 93
Hazard warning flashers........................... 93
direction indicators................................... 94
Interior lighting.......................................... 95
Home safe light duration........................... 96
Approach lighting...................................... 96
Headlamps - adjusting headlamp pat-
tern............................................................ 97
Wipers and washing................................ 101
Power windows....................................... 103
Door mirrors............................................ 105
Windows and rearview and door mirrors
- heating.................................................. 106
03
Rearview mirror - interior........................ 107
Compass*............................................... 107
Sunroof*.................................................. 109
Menu navigation - combined instrument
panel....................................................... 110
Menu overview - combined instrument
panel....................................................... 111
Messages................................................ 112
Messages - handling............................... 113
MY CAR.................................................. 113
Trip computer......................................... 114
Trip computer - analogue combined
instrument panel..................................... 116
Trip computer - digital combined instru-
ment panel.............................................. 120
Trip computer - supplementary informa-
tion.......................................................... 124
Trip computer - trip statistics*................ 125
Table of contents
4
* Option/accessory, for more information, see Introduction.
04
04 Climate control
General information on climate control... 127
Actual temperature................................. 128
Sensors - climate control........................ 128
Air quality................................................ 128
Air quality - passenger compartment fil-
ter............................................................ 129
Air quality - Clean Zone Interior Package
(CZIP)*..................................................... 129
Air quality - IAQS*................................... 130
Air quality - material................................ 130
Menu settings - climate control.............. 130
Air distribution in the passenger com-
partment.................................................. 131
Electronic climate control - ECC............. 133
Heated front seats*................................. 134
Heated rear seat*.................................... 134
Ventilated front seats*............................. 135
Fan.......................................................... 136
Auto-regulation....................................... 136
Temperature control in the passenger
compartment.......................................... 136
Air conditioning....................................... 137
Demisting and defrosting the wind-
screen..................................................... 137
Air distribution - recirculation.................. 138
04
Air distribution - table............................. 140
Engine and passenger compartment
heater*..................................................... 142
Engine block heater and passenger com-
partment heater* - direct start................ 143
Engine block heater and passenger com-
partment heater* - immediate stop......... 144
Engine block heater and passenger com-
partment heater* - timer.......................... 144
Engine block heater and passenger com-
partment heater* - messages................. 146
Additional heater*.................................... 148
Fuel-driven additional heater*................. 148
Electric additional heater*....................... 149
05
05 Loading and storage
Storage spaces....................................... 151
Tunnel console........................................ 153
Tunnel console - cigarette lighter and
ashtray*................................................... 153
Glovebox................................................. 153
Inlay mats*.............................................. 154
Vanity mirror............................................ 154
Tunnel console - 12 V-sockets............... 154
Loading................................................... 155
Loading - long load................................. 156
Roof load................................................. 157
Securing loads........................................ 157
Loading - bag holder*............................. 158
12 V electrical socket - cargo area*........ 158
Safety net*............................................... 159
Safety net* combined with cargo cover.. 160
Safety grille............................................. 160
Cargo cover............................................ 162
Table of contents
* Option/accessory, for more information, see Introduction.
5
06
06 Locks and alarm
Remote control key................................. 164
Remote control key - losing ................... 164
Remote control key - personalisation*.... 165
Locking/unlocking - indicator................. 166
Immobiliser.............................................. 166
Remote-controlled immobiliser with
tracking system*..................................... 167
Remote control key - functions............... 167
Remote control key - range.................... 169
Remote control key with PCC* - unique
functions................................................. 169
Remote control key with PCC* - range... 170
Detachable key blade............................. 171
Detachable key blade - detaching/
attaching................................................. 171
Detachable key blade - unlocking doors 172
Privacy locking*....................................... 172
Remote control key - replacing the bat-
tery.......................................................... 174
Keyless drive*.......................................... 175
Keyless Drive* - remote control key
range....................................................... 175
Keyless drive* - secure handling of the
remote control key.................................. 176
06
Keyless drive* - interference to remote
control key function................................ 177
Keyless drive* - locking........................... 177
Keyless drive* - unlocking....................... 178
Keyless drive* - unlocking with the key
blade ...................................................... 178
Keyless Drive* - lock settings................. 179
Keyless Drive* - antenna location........... 179
Locking/unlocking - from the outside..... 180
Locking/unlocking - from the inside....... 180
Global opening........................................ 181
Locking/unlocking - glovebox................. 181
Locking/unlocking - tailgate.................... 182
Power operated tailgate*........................ 183
Deadlocks*.............................................. 184
Child safety locks - manual activation.... 185
Child safety locks - electrical activation* 186
Alarm....................................................... 187
Alarm indicator........................................ 188
Alarm - automatic re-arming................... 188
Alarm - remote control key not working. 188
Alarm signals........................................... 189
Reduced alarm level............................... 189
06
Type approval - remote control key sys-
tem.......................................................... 189
Table of contents
6
* Option/accessory, for more information, see Introduction.
07
07 Driver support
Active chassis - Four C*.......................... 192
Electronic stability control (ESC) - gen-
eral.......................................................... 192
Electronic stability control (ESC) - opera-
tion.......................................................... 193
Electronic stability control (ESC) - sym-
bols and messages................................. 194
Road Sign Information (RSI)*.................. 196
Road sign information (RSI)* - operation 196
Road sign information (RSI)* - limitations 198
Cruise control*........................................ 199
Cruise control* - managing speed.......... 199
Cruise control* temporary deactivation
and standby mode.................................. 200
Cruise control* - resume set speed........ 201
Cruise control* - deactivate.................... 201
Adaptive cruise control - ACC*............... 201
Adaptive cruise control* - function......... 202
Adaptive cruise control* - overview........ 204
Adaptive cruise control* - managing
speed...................................................... 205
Adaptive cruise control* - set time inter-
val............................................................ 206
Adaptive cruise control* - temporary
deactivation, and standby mode............ 206
07
Adaptive cruise control* - overtaking
another vehicle........................................ 207
Adaptive cruise control* - deactivate...... 208
Adaptive Cruise Control* - queue assis-
tance....................................................... 208
Adaptive cruise control* - switch cruise
control functionality................................ 210
Radar sensor........................................... 210
Radar sensor - limitations....................... 211
Adaptive cruise control* - fault tracing
and action............................................... 213
Adaptive cruise control* - symbols and
messages................................................ 214
Distance Warning*.................................. 216
Distance Warning* - limitations............... 217
Distance Warning* - symbols and mes-
sages....................................................... 218
City Safety™........................................... 219
City Safety™ - function........................... 219
City Safety™ - operation........................ 220
City Safety™ - limitations....................... 221
City Safety™ - laser sensor.................... 223
City Safety™ - symbols and messages.. 225
Collision warning system*....................... 226
Collision warning system* - function...... 227
07
Collision warning system* - detection of
cyclists.................................................... 228
Collision warning system* - detection of
pedestrians............................................. 229
Collision warning system* - operation.... 230
Collision warning system* - limitations... 231
Collision warning system* - camera sen-
sor limitations.......................................... 232
Collision warning system* - symbols and
messages................................................ 234
Driver Alert System*................................ 236
Driver Alert Control (DAC)*...................... 236
Driver Alert Control (DAC)* - operation... 237
Driver Alert Control (DAC)* - symbols and
messages................................................ 238
Lane Departure Warning (LDW)*............. 239
Lane Departure Warning (LDW) - func-
tion.......................................................... 239
Lane Departure Warning (LDW) - opera-
tion.......................................................... 240
Lane Departure Warning (LDW) - limita-
tions........................................................ 241
Lane Departure Warning (LDW) - sym-
bols and messages................................. 242
Park Assist*............................................. 243
Park assist syst* - function..................... 243
Table of contents
* Option/accessory, for more information, see Introduction.
7
07
Park assist syst* - backward.................. 244
Park assist syst* - forward...................... 245
Park assist syst* - fault indication........... 246
Park assist syst* - cleaning the sensors. 246
Park assist camera*................................ 247
Park assist camera - settings................. 249
Park assist camera - limitations.............. 250
BLIS*....................................................... 250
BLIS* - operation.................................... 251
BLIS - symbols and messages............... 253
Adjustable steering force*....................... 254
Type approval - radar system................. 254
08
08 Starting and driving
Alcohol lock*........................................... 256
Alcohol lock* - functions and operation.. 256
Alcohol lock* - storage............................ 257
Alcohol lock* - before starting the engine 257
Alcohol lock* - to bear in mind................ 259
Alcohol lock* - symbols and text mes-
sages....................................................... 260
Starting the engine.................................. 261
Switching off the engine......................... 262
Steering lock........................................... 262
Remote start (ERS)*................................ 263
Remote start (ERS) - operation............... 263
Remote start (ERS) - symbols and mes-
sages....................................................... 265
Starting the engine – Flexifuel................. 266
Jump starting with battery...................... 267
Gearboxes............................................... 268
Manual gearbox...................................... 269
Gear shift indicator*................................ 269
Automatic gearbox -- Geartronic*........... 270
Automatic gearbox -- Powershift*.......... 274
Gear selector inhibitor............................. 276
Hill start assist (HSA)*............................. 277
All Wheel Drive - AWD*........................... 277
08
Hill Descent Control (HDC)*.................... 278
Start/Stop*.............................................. 279
Start/Stop* - function and operation....... 280
Start/Stop* - the engine does not stop... 281
Start/Stop* - the engine auto-starts........ 283
Start/Stop* - the engine does not auto-
start......................................................... 284
Start/Stop* - involuntary stop manual
gearbox................................................... 284
Start/Stop* - settings.............................. 285
Start/Stop* - symbols and messages..... 286
ECO*....................................................... 288
Foot brake............................................... 290
Foot brake - anti-lock braking system.... 291
Foot brake - emergency brake lights and
automatic hazard warning flashers......... 291
Foot brake - emergency brake assis-
tance....................................................... 291
Parking brake.......................................... 292
Driving in water....................................... 296
Overheating............................................. 296
Driving with open tailgate/boot lid.......... 297
Overload - starter battery........................ 297
Before a long journey.............................. 298
Winter driving.......................................... 298
Table of contents
8
* Option/accessory, for more information, see Introduction.
08
Fuel filler flap - Opening/closing............. 299
Fuel filler flap - manual opening.............. 299
Filling up with fuel................................... 299
Fuel - handling........................................ 300
Fuel - petrol............................................. 301
Fuel - diesel............................................. 301
Catalytic converters................................ 303
Fuel - bioethanol E85.............................. 303
Diesel particle filter (DPF)........................ 304
Economical driving.................................. 305
Driving with a trailer*............................... 306
Driving with a trailer* - manual gearbox.. 307
Driving with a trailer* - automatic gear-
box.......................................................... 307
Towing bracket/Towbar*......................... 308
Detachable towbar* - storage................. 308
Detachable towbar* - specifications....... 308
Detachable towbar* - attachment/
removal................................................... 309
Towing.................................................... 312
Towing eye.............................................. 313
Recovery................................................. 314
09
09 Wheels and tyres
Tyres - maintenance............................... 316
Tyres - direction of rotation.................... 317
Tyres - tread wear indicators.................. 318
Tyres - air pressure................................. 318
Wheel and wheel rim dimensions........... 319
Tyres - dimensions.................................. 320
Tyres - load index................................... 320
Tyres - speed ratings.............................. 321
Wheel bolts............................................. 321
Winter tyres............................................. 322
Changing wheels - removing wheels...... 322
Changing wheels - fitting........................ 325
Warning triangle...................................... 326
Tools....................................................... 326
Jack*....................................................... 327
First aid kit*............................................. 327
Tyre pressure monitoring*....................... 328
Tyre pressure monitoring system
(TPMS)* - general.................................... 328
Tyre pressure monitoring (TPMS)* -
adjust (recalibration)................................ 329
Tyre pressure monitoring system
(TPMS)* - status...................................... 330
Tyre pressure monitoring (TPMS)* - acti-
vate/deactivate....................................... 331
09
Tyre pressure monitoring (TPMS)* - rec-
ommendations........................................ 331
Tyre pressure monitoring (TPMS)* - driv-
eable punctured tyres*............................ 332
Tyre pressure monitoring (TPMS)* - recti-
fying low tyre pressure............................ 333
Tyre pressure monitoring (TM)*............... 333
Emergency puncture repair*................... 335
Emergency puncture repair kit* - loca-
tion.......................................................... 336
Emergency puncture repair kit* - over-
view......................................................... 336
Emergency puncture repair* - operation. 337
Emergency puncture repair* - recheck-
ing........................................................... 339
Emergency puncture repair kit* - inflating
the tyres.................................................. 340
Emergency puncture repair kit* - sealant 340
Type approval - tyre pressure monitoring
(TPMS).................................................... 341
Table of contents
* Option/accessory, for more information, see Introduction.
9
10
10 Maintenance and service
Volvo service programme....................... 348
Book service and repair*......................... 348
Raising the car........................................ 351
Bonnet - opening and closing................. 353
Engine compartment - overview............. 353
Engine compartment - checking............. 355
Engine oil - general................................. 355
Engine oil - checking and filling.............. 356
Coolant - level......................................... 360
Brake and clutch fluid - level.................. 361
Power steering fluid - level...................... 361
Climate control system - fault tracing and
repair....................................................... 362
Lamp replacement - general................... 362
Lamp replacement - headlamps............. 363
Lamp replacement - cover for main/
dipped beam bulbs................................. 364
Lamp replacement - dipped beam......... 365
Lamp replacement - main beam............. 365
Lamp replacement - extra main beam.... 365
Lamp replacement - direction indicators
front......................................................... 366
Lamp replacement - rear lamp............... 366
Lamp replacement - location of rear
lamps...................................................... 366
10
Lamp replacement - number plate light-
ing........................................................... 367
Lamp replacement - lighting in cargo
area......................................................... 367
Lamp replacement - vanity mirror light-
ing........................................................... 367
Lamps - specifications ........................... 368
Wiper blades........................................... 369
Washer fluid - filling................................ 371
Starter battery - general.......................... 371
Battery - symbols.................................... 373
Starter battery - replacement.................. 374
Battery - Start/Stop................................. 375
Electrical system..................................... 377
Fuses - general....................................... 378
Fuses - in engine compartment.............. 379
Fuses - under glovebox.......................... 383
Fuses - in the control module under the
glovebox................................................. 385
Fuses - in cargo area.............................. 387
Fuses - in the engine compartment's
cold zone................................................ 388
Car wash................................................. 390
Polishing and waxing.............................. 391
Water and dirt-repellent coating............. 392
10
Rustproofing........................................... 392
Cleaning the interior................................ 393
Paint damage.......................................... 394
Table of contents
10
11
11 Specifications
Type designations................................... 397
Dimensions............................................. 400
Weights................................................... 402
Towing capacity and towball load.......... 403
Engine specifications.............................. 406
Engine oil - adverse driving conditions... 408
Engine oil - grade and volume................ 409
Coolant - grade and volume................... 412
Transmission fluid - grade and volume... 413
Brake fluid - grade and volume............... 415
Power steering fluid - grade.................... 415
Washer fluid - quality and volume.......... 415
Fuel tank - volume.................................. 416
Fuel consumption and CO2 emissions... 417
Tyres - approved tyre pressures............. 418
12
12 Alphabetical Index
Alphabetical Index.................................. 422
Table of contents
11
INTRODUCTION
01 Introduction
01
}}
* Option/accessory, for more information, see Introduction.
13
Owner information
Your car is fitted with a screen which shows
information on how your car is working
1
.
For cars with owner information in the screen,
the printed owner's manual is a supplement
and contains important text, the latest
updates, as well as instructions that can be
useful when, for practical reasons, you are
unable to read the information on the screen.
Changing the screen's language may mean
that certain information is no longer in
accordance with national or local laws and
regulations.
IMPORTANT
The driver is always responsible that the
vehicle is driven safely in traffic and that
applicable laws and regulations are fol-
lowed. It is also important that the car is
maintained and handled in accordance
with Volvo's recommendations in the
owner's information.
If there should be a difference between the
information on the screen and in the prin-
ted manual then it is always the printed
information that applies.
Reading the owner's manual
A good way of getting to know your new car
is to read the owner's manual, ideally before
your first journey.
Reading the owner's manual will give you the
opportunity to familiarise yourself with new
functions, advice on how best to handle the
car in different situations and to make the
best use of all the car's features. Please pay
attention to the safety instructions contained
in the owner's manual.
The specifications, design features and illus-
trations in the owner's manual are not bind-
ing. We reserve the right to make modifica-
tions without prior notice.
© Volvo Car Corporation
Owner's Manual in mobile devices
NOTE
The owner's manual is available for down-
load as a mobile application (applies for
certain car models and mobile devices),
see www.volvocars.com.
The mobile application also includes video
and searchable content and easy naviga-
tion between different sections.
Options/accessories
All types of option/accessory are marked with
an asterisk*.
In addition to standard equipment, the
owner's manual also describes options (fac-
tory fitted equipment) and certain accessories
(retrofitted extra equipment).
The equipment described in the owner's
manual is not available in all cars - they have
different equipment depending on adapta-
tions for the needs of different markets and
national or local laws and regulations.
In the event of uncertainty over what is stand-
ard or an option/accessory, contact a Volvo
dealer.
1
Applies to certain car models.
||
01 Introduction
01
14
Special texts
WARNING
Warning texts appear if there is a risk of
injury.
IMPORTANT
"Important" texts appear if there is a risk of
damage.
NOTE
NOTE texts give advice or tips that facili-
tate the use of e.g. features and functions.
Footnote
There is footnote information in the owner's
manual that is located at the bottom of the
page. This information is an addition to the
text that it refers to via a number. If the foot-
note refers to text in a table then letters are
used instead of numbers for referral.
Message texts
In the car there are displays that show menu
texts and message texts. In the owner's man-
ual the appearance of these texts differs from
the normal text. Examples of menu texts and
message texts:
Media, Sending location.
Decals
The car contains different types of decal
which are designed to convey important
information in a simple and clear manner. The
decals in the car have the following descend-
ing degree of importance for the warning/
information.
Warning for personal injury
G031590
Black ISO symbols on yellow warning field,
white text/image on black message field.
Used to indicate the presence of danger
which, if the warning is ignored, may result in
serious personal injury or fatality.
Risk of property damage
G031592
White ISO symbols and white text/image on
black or blue warning field and message field.
Used to indicate the presence of danger
which, if the warning is ignored, may result in
damage to property.
01 Introduction
01
15
Information
G031593
White ISO symbols and white text/image on
black message field.
NOTE
It is not intended that the decals illustrated
in the owner's manual should be exact
replicas of those in the car. They are
included to show their approximate
appearance and location in the car. The
information that applies to your particular
car is available on the respective decals
for your car.
Procedure lists
Procedures where action must be taken in a
certain sequence are numbered in the
owner's manual.
When there is a series of illustrations for
step-by-step instructions each step is
numbered in the same way as the corres-
ponding illustration.
There are numbered lists with letters
adjacent to the series of illustrations
where the order of the instructions is not
significant.
Arrows appear numbered and unnum-
bered and are used to illustrate a move-
ment.
Arrows with letters are used to clarify a
movement when the reciprocal order is of
no relevance.
If there is no series of illustrations for step-by-
step instructions then the different steps are
numbered with normal numbers.
Position lists
Red circles containing a number are used
in overview images where different com-
ponents are pointed out. The number
recurs in the position list featured in con-
nection with the illustration that describes
the item.
Bulleted lists
A bulleted list is used when there is a list of
points in the owner's manual.
Example:
Coolant
Engine oil
Related information
Related information refers to other articles
containing closely-associated information.
Images
The manual's images are sometimes sche-
matic and may deviate from the car's appear-
ance depending on equipment level and mar-
ket.
To be continued
}} This symbol is located furthest down to
the right when an article continues on the fol-
lowing page.
Continued from previous page
|| This symbol is located furthest up to the
left when an article continues from the previ-
ous page.
Related information
The owner's manual and the environment
(p. 23)
Information on the Internet (p. 19)
01 Introduction
01
16
Digital owner's manual in the car
The owner's manual can be read on the
screen in the car
2
. The content is searchable
and it is easy to navigate between different
sections.
Open the digital owner's manual - press the
MY CAR button in the centre console, press
OK/MENU and select
Owner's manual.
For basic navigation, see Operating the sys-
tem. See below for a more detailed descrip-
tion.
Owner's manual, start page.
There are four options for finding information
in the digital owner's manual:
Search - Search function for finding an
article.
Categories - All articles sorted into cate-
gories.
Favourites - Quick access to favourite-
bookmarked articles.
Quick Guide - A selection of articles for
common functions.
Select the information symbol in the lower
right-hand corner in order to obtain informa-
tion about the digital owner's manual.
NOTE
The digital owner's manual is not available
while driving.
Search
Searching using the character wheel.
Character list.
Changing the input mode (see following
table).
Use the character wheel to enter a search
term, e.g. "seatbelt".
1. Turn TUNE to the desired letter, press
OK/MENU to confirm. The number and
letter buttons on the control panel in the
centre console can also be used.
2. Continue with the next letter and so on.
2
Applies to certain car models.
01 Introduction
01
}}
17
3. To change the input mode to numbers or
special characters, or to perform a
search, turn TUNE to one of the options
(see explanation in the following table) in
the list for changing the input mode (2),
press OK/MENU.
123/AB
C
Change between letters and
numbers with OK/MENU.
MORE
Change to special characters
with OK/MENU.
OK
Perform the search. Turn TUNE
to select a search result article,
press OK/MENU to go to the
article.
a|A
Changes between lowercase
and uppercase letters with OK/
MENU.
| | }
Changes from the character
wheel to the search field. Move
the cursor with TUNE. Delete
any misspelling with EXIT. To
return to the character wheel,
press OK/MENU.
Note that the digit and letter
buttons on the control panel
can be used for editing in the
search field.
Enter with the numerical keyboard
Numerical keyboard.
Another way of entering characters is to use
the centre console's buttons 0-9, * and #.
When e.g. 9 is pressed, a bar appears with all
characters
3
under the button, e.g.
W, x, y, z
and 9. Quick presses on the button move the
cursor through these characters.
Stop with the cursor on the desired char-
acter in order to select it - the character is
shown on the enter line.
Delete/undo using EXIT.
To enter a number, hold in the corresponding
number key.
Categories
The articles in the owner's manual are struc-
tured into main categories and subcategories.
The same article can be in several appropri-
ate categories in order to be found more
easily.
Turn TUNE to navigate in the category tree
and press OK/MENU to open a category -
selected
- or article - selected . Press
EXIT to go back to the previous view.
Favourites
Located here are the articles that are saved
as favourites. To select an article as a favour-
ite, see the heading "Navigating in an article"
below.
Turn TUNE to navigate in the favourite list
and press OK/MENU to open an article.
Press EXIT to go back to the previous view.
Quick Guide
Located here is a selection of articles for get-
ting to know the car's most common func-
tions. The articles can also be accessed via
categories, but are collected here for quick
access.
Turn TUNE to navigate in the Quick Guide
and press OK/MENU to open an article.
Press EXIT to go back to the previous view.
3
The character for each button may vary depending on market/country/language.
||
01 Introduction
01
18
Navigating in an article
Home - leads to the start page for the
owner's manual.
Favourite - adds/removes an article as a
favourite. You can also press the FAV
button in the centre console to add/
remove an article as a favourite.
Highlighted link - leads to linked article.
Special texts - if the article contains
warnings, important or note texts then an
associated symbol is shown here as well
as the number of such texts in the article.
Turn TUNE to navigate between the links or
scroll in an article. When the screen has
scrolled to the start/end of an article the
home and favourite options are accessed by
scrolling a further step up/down. Press OK/
MENU to activate the selection/highlighted
link. Press EXIT to go back to the previous
view.
Recording data
Certain information about the vehicle's opera-
tion and functionality, and any incidents, are
recorded in the car.
Your vehicle contains a number of computers
whose function is to continuously check and
monitor the vehicle's operation and function-
ality. Some of the computers can record
information during normal driving if they
detect an error. In addition, information is
recorded in the event of a collision or inci-
dent. Parts of the recorded information are
required so that technicians can diagnose
and rectify faults in the vehicle during servic-
ing and maintenance and so that Volvo can
fulfil legal requirements and other regulations.
In addition to this, the information is used for
research purposes by Volvo in order to con-
tinually develop quality and safety, as the
information can contribute to a better under-
standing of the factors that cause accidents
and injuries. The information includes details
of the status and functionality of various sys-
tems and modules in the vehicle with regard
to engine, throttle, steering and brake sys-
tems, amongst other things. This information
may include details regarding the way the
driver drives the vehicle, such as vehicle
speed, brake and accelerator pedal use,
steering wheel movement and whether or not
the driver and passengers have used their
seatbelts. For the reasons given this informa-
tion may be stored in the vehicle's computers
for a certain length of time, but also as a
result of a collision or incident. This informa-
tion may be stored by Volvo as long as it can
help to further develop and further enhance
safety and quality and as long as there are
legal requirements and other regulations that
Volvo needs to consider.
Volvo will not contribute to the above-descri-
bed information being disclosed to third par-
ties without the vehicle owner's consent.
However, due to national legislation and reg-
ulations Volvo may be required to disclose
such information to authorities such as police
authorities, or others who may assert a legal
right to have access to it.
To be able to read and interpret the informa-
tion recorded by the computers in the vehicle
requires special technical equipment that
Volvo, and workshops that have entered into
agreements with Volvo, have access to. Volvo
is responsible that the information, which is
transferred to Volvo during servicing and
maintenance, is stored and handled in a
secure manner and that the handling com-
plies with applicable legal requirements. For
further information - contact a Volvo dealer.
01 Introduction
01
* Option/accessory, for more information, see Introduction.
19
Accessories and extra equipment
The incorrect connection and installation of
accessories and extra equipment can nega-
tively affect the car's electronic system.
Certain accessories only function when asso-
ciated software is installed in the car's com-
puter system. Volvo therefore recommends
that you always contact an authorised Volvo
workshop before installing accessories or
extra equipment which are connected to or
affect the electrical system.
Heat-reflecting windscreen*
The windscreen is equipped with a heat-
reflecting film (IR) that reduces the solar heat
radiation into the passenger compartment.
The positioning of electronic equipment, such
as a transponder, behind a glass surface with
heat-reflecting film may affect its function and
performance.
For the optimal function of electronic equip-
ment, it should be positioned on the part of
the windscreen with no heat-reflecting film
(see the highlighted area in the illustration).
Areas where IR film is not applied.
A is the distance from the top edge of the
windscreen down to the start of the field. B is
the distance from the top edge of the wind-
screen down to the end of the field.
Dimensions
A 47 mm
B 87 mm
Information on the Internet
At www.volvocars.com there is further infor-
mation concerning your car.
With a personal Volvo ID it is possible to log in
to My Volvo web, which is a personal web
page for you and your car.
QR code
A QR code reader is required to read the QR
code, which is available as a supplemental
program (app) for several mobile phones. The
QR code reader can be downloaded from e.g.
App Store, Windows Phone or Google Play.
01 Introduction
01
20
* Option/accessory, for more information, see Introduction.
Volvo ID
Volvo ID is your personal ID that provides
access to various services
4
.
Examples of services:
My Volvo - Your personal web page for
you and your car.
In an Internet-connected car* - Certain
functions and services require that you
have registered your car to a personal
Volvo ID, for example to be able to send a
new address from a map service on the
Internet directly to the car.
Volvo On Call, VOC* - Volvo ID is used
when logging in to the Volvo On Call
mobile app.
Advantages of Volvo ID
One user name and one password to
access online services, i.e. only one user-
name and one password to remember.
When changing the username/password
for a service (e.g. VOC) it will also be
changed automatically for other services
(e.g. My Volvo)
Create a Volvo ID
To create a Volvo ID you need to enter a per-
sonal e-mail address. Then follow the instruc-
tions in the e-mail message that is automati-
cally sent to the specified address in order to
complete the registration. It is possible to cre-
ate a Volvo ID via one of the following serv-
ices:
My Volvo - Enter your e-mail address and
follow the instructions.
For an Internet-connected car* - Enter
your e-mail address in the app that
requires Volvo ID and follow the instruc-
tions. Alternatively press the Connect
button
in the centre console and
select
Apps Settings and follow the
instructions.
Volvo On Call, VOC* - Download the lat-
est version of the VOC app. Choose to
create a Volvo ID from the start page,
enter e-mail address and follow the
instructions.
Related information
Information on the Internet (p. 19)
4
The services available may vary over time and vary depending on equipment level and market.
01 Introduction
01
}}
21
Volvo Car Corporation's
environmental philosophy
Your Volvo complies with strict international
environmental standards and is also manufac-
tured in one of the cleanest and most
resource-efficient plants in the world.
Environmental care is one of Volvo Car Cor-
poration's core values which influence all
operations. We also believe that our custom-
ers share our consideration for the environ-
ment.
Volvo Car Corporation has global ISO certifi-
cation, which includes the environmental
standard ISO 14001 covering all factories and
several of our other units. We also set
requirements for our partners so that they
work systematically with environmental
issues.
Fuel consumption
Volvo cars have competitive fuel consump-
tion in each of their respective classes. Lower
fuel consumption generally results in lower
emission of the greenhouse gas, carbon diox-
ide.
It is possible for the driver to influence fuel
consumption. For more information read
under the heading, Reducing environmental
impact.
Efficient emission control
Your Volvo is manufactured following the
concept "Clean inside and out" – a concept
that encompasses a clean interior environ-
ment as well as highly efficient emission con-
trol. In many cases the exhaust emissions are
well below the applicable standards.
Clean air in the passenger
compartment
A passenger compartment filter prevents dust
and pollen from entering the passenger com-
partment via the air intake.
||
01 Introduction
01
22
* Option/accessory, for more information, see Introduction.
A sophisticated air quality system, IAQS*
(Interior Air Quality System) ensures that the
incoming air is cleaner than the air in the traf-
fic outside.
The system consists of an electronic sensor
and a carbon filter. The incoming air is moni-
tored continuously and if there is an increase
in the level of certain unhealthy gases such as
carbon monoxide then the air intake is
closed. Such a situation may arise in heavy
traffic, queues and tunnels for example.
The entry of nitrous oxides, ground-level
ozone and hydrocarbons is prevented by the
carbon filter.
Interior
The interior of a Volvo is designed to be plea-
sant and comfortable, even for people with
contact allergies and for asthma sufferers.
Extreme attention has been given to choosing
environmentally-compatible materials.
Volvo workshops and the environment
Regular maintenance creates the conditions
for a long service life and low fuel consump-
tion for your car. In this way you contribute to
a cleaner environment. When Volvo's work-
shops are entrusted with the service and
maintenance of your car it becomes part of
our system. Volvo makes clear demands
regarding the way in which our workshops
are designed in order to prevent spills and
discharges into the environment. Our work-
shop staff have the knowledge and the tools
required to guarantee good environmental
care.
Reducing environmental impact
You can easily help reduce environmental
impact - here are a few tips:
Avoid letting the engine idle - switch off
the engine when stationary for longer
periods. Pay attention to local regula-
tions.
Drive economically - think ahead.
Perform service and maintenance in
accordance with the instructions in the
owner's manual - follow the Service and
Warranty Booklet's recommended inter-
vals.
If the car is equipped with an engine
block heater*, use it before starting from
cold - it improves starting capacity and
reduces wear in cold weather and the
engine reaches normal operating tem-
perature more quickly, which lowers con-
sumption and reduces emissions.
High speed increases consumption con-
siderably due to increased wind resis-
tance - a doubling of speed increases
wind resistance 4 times.
Always dispose of environmentally hazar-
dous waste, such as batteries and oils, in
an environmentally safe manner. Consult
a workshop in the event of uncertainty
about how this type of waste should be
discarded - an authorised Volvo work-
shop is recommended.
Following this advice can save money, the
planet's resources are saved, and the car's
durability is extended. For more information
and further advice, see Eco guide (p. 67),
Economical driving (p. 305) and Fuel con-
sumption (p. 417).
Recycling
As a part of Volvo's environmental work, it is
important that the car is recycled in an envi-
ronmentally sound manner. Almost all of the
car can be recycled. The last owner of the car
is therefore requested to contact a dealer for
referral to a certified/approved recycling
facility.
Related information
The owner's manual and the environment
(p. 23)
01 Introduction
01
* Option/accessory, for more information, see Introduction.
23
The owner's manual and the
environment
The paper pulp in a printed owner's manual
comes from FSC
®
certified forests or other
controlled sources.
The Forest Stewardship Council
®
symbol
shows that the paper pulp in a printed
owner's manual comes from FSC
®
certified
forests or other controlled sources.
Related information
Volvo Car Corporation's environmental
philosophy (p. 21)
Laminated glass
Laminated glass
The glass is reinforced which pro-
vides better protection against
break-ins and improved sound insu-
lation in the passenger compart-
ment. The windscreen and other windows*
have laminated glass.
SAFETY
02 Safety
02
25
General information on seatbelts
Heavy braking can have serious consequen-
ces if the seatbelts are not used. Ensure that
all passengers are using their seatbelts during
the journey.
Tension the hip strap over the lap by pulling the
diagonal shoulder belt up towards the shoulder.
The hip strap must be positioned low down (not
over the abdomen).
It is important that the seatbelt lies against
the body so it can provide maximum protec-
tion. Do not lean the backrest too far back.
The seatbelt is designed to protect in a nor-
mal seating position.
Unbelted occupants will be reminded to fas-
ten their (p. 26) seatbelt by means of an
audio and visual reminder (p. 27).
Remember
Do not use clips or anything else that can
prevent the seatbelt from fitting properly.
The seatbelt must not be twisted or
caught on anything.
WARNING
The seatbelts and airbags interact. If a
seatbelt is not used or is used incorrectly,
this may diminish the protection provided
by the airbag in the event of a collision.
WARNING
Each seatbelt is designed for only one per-
son.
WARNING
Never modify or repair the seatbelts your-
self. Volvo recommends that you contact
an authorised Volvo workshop.
If a seatbelt has been subjected to a major
load, such as in conjunction with a colli-
sion, the entire seatbelt must be replaced.
Some of the protective characteristics of
the seatbelt may have been lost, even if it
appears to be undamaged. In addition,
replace the seatbelt if the belt is worn or
damaged. The new seatbelt must be type-
approved and intended for installation in
the same position as the replaced seatbelt.
Related information
Seatbelt - pregnancy (p. 27)
Seatbelt - loosening (p. 26)
Seatbelt tensioner (p. 28)
02 Safety
02
26
Seatbelt - putting on
Put on the seatbelt (p. 25) before driving
starts.
Pull the belt out slowly and secure it by
pressing its locking tab into the seatbelt
buckle. A loud "click" indicates that the belt
has locked.
Correctly fitted seatbelt.
Incorrectly fitted seatbelt. The belt must rest on
the shoulder.
The buckles only fit the intended lock in the
rear seat
1
.
Remember
The seatbelt locks and cannot be withdrawn:
if it is pulled out too quickly
during braking and acceleration
if the car leans heavily.
Related information
Seatbelt - pregnancy (p. 27)
Seatbelt - loosening (p. 26)
Seatbelt tensioner (p. 28)
Seatbelt reminder (p. 27)
Seatbelt - loosening
Loosen the seatbelt (p. 25) when the car is
stationary.
Press the red button on the seatbelt buckle
and then let the belt retract. If the seatbelt
does not retract fully, feed it in by hand so
that it does not hang loose.
Related information
Seatbelt - putting on (p. 26)
Seatbelt reminder (p. 27)
1
Certain markets.
02 Safety
02
}}
27
Seatbelt - pregnancy
Seatbelt (p. 25) must always be worn during
pregnancy. But it is crucial that it be worn in
the correct way.
G020998
The diagonal section should wrap over the
shoulder then be routed between the breasts
and to the side of the abdomen.
The lap section should lay flat over the thighs
and as low as possible under the abdomen. –
It must never be allowed to ride upward.
Remove the slack from the seatbelt and
ensure that it fits as close to the body as pos-
sible. In addition, check that there are no
twists in the seatbelt.
As the pregnancy progresses, pregnant dri-
vers must adjust the seat (p. 80) and steer-
ing wheel (p. 84) such that they can easily
maintain control of the vehicle as they drive
(which means that they must be able to easily
operate the foot pedals and steering wheel).
The aim should be to position the seat with as
large a distance as possible between abdo-
men and steering wheel.
Related information
Seatbelt - putting on (p. 26)
Seatbelt - loosening (p. 26)
Seatbelt reminder
Unbelted occupants will be reminded to fas-
ten their (p. 26) seatbelt by means of an audio
and visual reminder.
G017726
The audio reminder is speed dependent, and
in some cases time dependent. The visual
reminder is located in the roof console and in
the combined instrument panel (p. 63).
Child seats are not covered by the seatbelt
reminder system.
Rear seat
The seatbelt reminder in the rear seat has two
subfunctions:
Provides information on which seatbelts
(p. 25) are being used in the rear seat. A
message appears in the combined instru-
ment panel when the seatbelts are in use,
or if one of the rear doors has been
opened. The message is cleared auto-
||
02 Safety
02
28
matically after driving for approximately
30 seconds or after pressing the indicator
stalk OK button (p. 110).
Provides a warning if one of the rear seat-
belts is unfastened during travel. This
warning takes the form of a message in
the combined instrument panel along with
the audio/visual signal. The warning stops
when the seatbelt is re-fastened, or it can
also be acknowledged manually by
pressing the OK button.
The message in the combined instrument
panel showing which seatbelts are in use is
always shown. Press the OK button to see
stored messages.
Certain markets
An acoustic signal and indicator lamp remind
the driver and front seat passenger to use a
seatbelt if either of them is not wearing one.
At low speed, the audible reminder will sound
for the first 6 seconds.
Seatbelt tensioner
All the seatbelts (p. 25) are equipped with belt
tensioners. A mechanism in the seatbelt ten-
sioner tightens the seatbelt in the event of a
sufficiently violent collision. The seatbelt then
provides more effective restraint for the occu-
pants.
WARNING
Never insert the tongue of the passenger's
seatbelt into the buckle on the driver's
side. Always insert the tongue of the seat-
belt into the buckle on the correct side. Do
not make any damages on seatbelts nor
insert any foreign objects into a buckle.
The seatbelts and buckles would then
possibly not function as intended in the
event of a collision. There is a risk of
serous injury.
Safety - warning symbol
The warning symbol is shown if a fault is
detected during fault tracing or if a system
has been activated. Where required, the
warning symbol is shown together with a
message in the combined instrument panel
(p. 63) information display.
Warning triangle and warning symbol for the air-
bag system (p. 29) in the analogue combined
instrument panel.
02 Safety
02
}}
29
Warning triangle and warning symbol for the air-
bag system in the digital combined instrument
panel.
The warning symbol in the combined instru-
ment panel illuminates when the remote con-
trol key is in key position II (p. 78). The sym-
bol is extinguished after approx. 6 seconds
provided the airbag system is fault-free.
WARNING
If the warning symbol for the airbag sys-
tem remains illuminated or illuminates
while driving, it means that the airbag sys-
tem does not have full functionality. The
symbol indicates a fault in the seatbelt ten-
sioner system, SIPS, the IC system or
some other fault in the system. Volvo rec-
ommends that you contact an authorised
Volvo workshop immediately.
If the warning symbol malfunctions, the warn-
ing triangle illuminates and
SRS airbag
Service required
or SRS airbag Service
urgent appears in the display. Volvo recom-
mends that you contact an authorised Volvo
workshop immediately.
Related information
General information on safety mode
(p. 39)
Airbag system
In the event of a frontal collision the airbag
system helps to protect the head, face and
chest of the driver and passenger.
G018665
Airbag system viewed from above, left-hand-
drive car.
G018666
Airbag system viewed from above, right-hand-
drive car.
||
02 Safety
02
30
The system consists of airbags and sensors.
A sufficiently violent collision trips the sensors
and the airbag(s) are inflated and become
hot. The airbag cushions the initial collision
impact for the occupant. The airbag deflates
when compressed by the collision. When this
occurs, smoke escapes into the car. This is
completely normal. The entire process,
including inflation and deflation of the airbag,
occurs within tenths of a second.
WARNING
Volvo recommends that you contact an
authorised Volvo workshop for repair.
Defective work in the airbag system could
cause malfunction and result in serious
personal injury.
NOTE
The detectors react differently depending
on the nature of the collision and whether
or not the seatbelts are fastened. Applies
to all belt positions.
It is therefore possible that only one (or
none) of the airbags may inflate in a colli-
sion. The detectors sense the force of the
collision on the vehicle and the action is
adapted accordingly so that one or more
airbags are deployed.
Related information
Driver airbag (p. 30)
Passenger airbag (p. 31)
Safety - warning symbol (p. 28)
Driver airbag
To supplement the protection afforded by the
seatbelt (p. 25) the car is equipped on the
driver's side with an airbag (p. 29).
This airbag is fitted into the centre of the
steering wheel. The steering wheel is marked
AIRBAG.
WARNING
The seatbelts and airbags interact. If the
belt is not used or is used incorrectly, this
may diminish the protection provided by
the airbag in the event of a collision.
Related information
Passenger airbag (p. 31)
02 Safety
02
}}
31
Passenger airbag
To supplement the protection afforded by the
seatbelt (p. 25) on the passenger side, the car
is equipped with an airbag (p. 29).
The airbag is folded up into a compartment
above the glovebox. Its cover panel is
marked AIRBAG.
Location of the front passenger airbag in a left-
hand drive car.
Location of the front passenger airbag in a right-
hand drive car.
The warning label for the passenger airbag is
fitted in one of the following two locations in
the car:
Alternative 1: Position of airbag label on passen-
ger side sun visor.
Alternative 2: Position of airbag label on passen-
ger side door pillar. The label becomes visible
when the passenger door is opened.
WARNING
Never use a rear-facing child seat on a
seat protected by an activated airbag. Fail-
ure to follow this advice can lead to death
or serious injury to the child.
WARNING
The seatbelts and airbags interact. If the
belt is not used or is used incorrectly, this
may diminish the protection provided by
the airbag in the event of a collision.
To minimise the risk of injury if the airbag
deploys, passengers must sit as upright as
possible with their feet on the floor and
backs against the backrest. Seatbelts
must be secured.
||
02 Safety
02
32
* Option/accessory, for more information, see Introduction.
WARNING
Do not put objects in front of or above the
dashboard where the passenger airbag is
located.
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the air-
bag is activated.
Never allow anybody to stand or sit in front
of the front passenger seat.
No one shorter than 140 cm should ever
sit in the front passenger seat if the airbag
is activated.
Failure to follow the advice given above
can endanger life.
Switch - PACOS*
The front passenger airbag can be deacti-
vated (p. 32) if the car is equipped with a
switch, PACOS (Passenger Airbag Cut Off
Switch).
WARNING
If the car is equipped with a front passen-
ger airbag, but does not have a PACOS
switch (Passenger Airbag Cut Off Switch),
then the airbag will always be activated.
Related information
Driver airbag (p. 30)
Child seats (p. 42)
Passenger airbag - activating/
deactivating*
Front passenger airbag (p. 31) can be deacti-
vated if the car is equipped with a switch,
PACOS (Passenger Airbag Cut Off Switch).
Switch - PACOS
The switch for the passenger airbag (PACOS)
is located on the passenger end of the instru-
ment panel and is accessible when the pas-
senger door is open.
Check that the switch is in the required posi-
tion. The remote control key's key blade
(p. 171) should be used to change position.
Location of airbag switch.
The airbag is activated. With the switch in
this position, persons taller than 140 cm
can sit in the front passenger seat, but
never children in a child seat or on a
booster cushion.
The airbag is deactivated. With the switch
in this position, children in a child seat or
on a booster cushion can sit in the front
passenger seat, but never persons taller
than 140 cm.
WARNING
Activated airbag (passenger seat):
Never place a child in a child seat or on a
booster cushion on the front passenger
seat when the airbag is activated. This
applies to everyone shorter than 140 cm.
Deactivated airbag (passenger seat):
No one taller than 140 cm should ever sit
in the front passenger seat when the air-
bag is deactivated.
Failure to follow the advice given above
can endanger life.
NOTE
When the remote control key is in key
position II (p. 78) the warning symbol
(p. 28) for the airbag is shown in the com-
bined instrument panel for
approx. 6 seconds.
Following which, the indicator in the roof
console is illuminated showing the correct
status for the front passenger seat airbag.
02 Safety
02
33
G017800
Indicator showing that the passenger airbag is
activated.
A warning symbol in the roof console indi-
cates that the airbag for the front passenger
seat is activated (see preceding illustration).
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the air-
bag is activated and the symbol
in
the roof console is illuminated. Failure to
follow this advice could endanger the life
of the child.
2
2
G017724
Indicator showing that the passenger airbag is
deactivated.
A text message and a symbol in the roof con-
sole indicate that the airbag for the front pas-
senger seat is deactivated (see preceding
illustration).
WARNING
Do not allow anyone to sit in the front pas-
senger seat if the message in the roof con-
sole indicates that the airbag is deacti-
vated, and if the warning symbol(p. 28) for
the airbag system is also displayed on the
combined instrument panel. This indicates
that there has been a severe malfunction.
Visit a workshop as soon as possible.
Volvo recommends that you contact an
authorised Volvo workshop.
WARNING
Failure to follow the advice given above
can endanger the lives of passengers in
the car.
Related information
Child seats (p. 42)
02 Safety
02
34
Side airbag (SIPS)
In a side impact collision a large proportion of
the collision force is transferred by the SIPS
(Side Impact Protection System) to beams,
pillars, the floor, the roof and other structural
parts of the body. The side airbags at the driv-
er's and front passenger seats protect the
chest area and the hip and are an important
part of the SIPS.
G032949
The SIPS bag system consists of two main
components, side airbag and sensors. The
side airbags are located in the front seat's
backrests.
A sufficiently violent collision trips the sensors
and the side airbags are inflated. The airbag
inflates between the occupant and the door
panel and thereby cushions the initial impact.
The airbag deflates when compressed by the
collision. The side airbag is normally only
deployed on the side of the collision.
Driver's seat, left-hand drive.
Front passenger seat, left-hand drive.
WARNING
Volvo recommends that repairs are
only carried out by an authorised Volvo
workshop. Defective work in the SIPS-
bag system could cause malfunction
and result in serious personal injury.
Do not put objects in the area between
the outside of the seat and the door
panel, since this area is required by
the side airbag.
Volvo recommends the use only of car
seat covers approved by Volvo. Other
seat covers may impede the operation
of the side airbags.
Side airbags are a supplement the
seatbelts. Always use a seatbelt.
Related information
Driver airbag (p. 30)
Passenger airbag (p. 31)
Side airbag (SIPS) - child seat/booster
cushion (p. 35)
Inflatable Curtain (IC) (p. 35)
02 Safety
02
35
Side airbag (SIPS) - child seat/booster
cushion
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the side airbag (p. 34).
Child seat/booster cushion (p. 42) can be
placed on the front passenger seat provided
that the car does not have an activated airbag
(p. 32) on the front passenger side.
Related information
Passenger airbag (p. 31)
General information on child safety
(p. 41)
Inflatable Curtain (IC)
The inflatable curtain helps to prevent the
driver and passengers from striking their
heads on the inside of the car during a colli-
sion.
Inflatable curtain IC (Inflatable Curtain) is part
of the SIPS system (p. 34) and the airbag sys-
tem (p. 29). It is fitted in the headlining along
both sides of the roof and protects the car's
occupants sitting in the outer seats. A suffi-
ciently violent collision trips the sensors and
the inflatable curtain is inflated.
WARNING
Never hang or attach heavy items onto the
handles in the roof. The hook is only
designed for light clothing (not for solid
objects such as umbrellas for example).
Do not screw or install anything onto the
car's headlining, door pillars or side pan-
els. This could compromise the intended
protection. Volvo recommends that you
only ever use Volvo genuine parts that are
approved for placement in these areas.
WARNING
Do not load the car higher than 50 mm
under the top edge of the windows in the
doors. Otherwise, the intended protection
of the inflatable curtain, which is con-
cealed in the headlining, may be compro-
mised.
WARNING
The inflatable curtain is a supplement to
the seatbelts. Always use a seatbelt.
Related information
General information on seatbelts (p. 25)
02 Safety
02
36
General information on WHIPS
(whiplash protection)
WHIPS (Whiplash Protection System) is a pro-
tection against whiplash injuries. The system
consists of energy absorbing backrests and
specially designed head restraints in the front
seats.
The WHIPS system is actuated by a rear-end
collision, where the angle and speed of the
collision, and the nature of the colliding vehi-
cle all have an influence.
WARNING
The WHIPS system is a supplement to the
seatbelts. Always use a seatbelt.
Seat properties
When the WHIPS system is deployed, the
front seat backrests are lowered backward to
change the seating position of the driver and
front seat passenger. This reduces the risk of
whiplash injury.
WARNING
Never modify or repair the seat or WHIPS
system yourself. Volvo recommends that
you contact an authorised Volvo work-
shop.
Related information
WHIPS - child seats (p. 37)
WHIPS - seating position (p. 37)
General information on seatbelts (p. 25)
02 Safety
02
}}
37
WHIPS - child seats
The protection provided by the car to children
seated in a child seat or on a booster cushion
is not diminished by the WHIPS system
(p. 36).
Child seat/booster cushion (p. 42) can be
placed on the front passenger seat provided
that the car does not have an activated airbag
(p. 32) on the front passenger side.
Related information
General information on child safety
(p. 41)
WHIPS - seating position
For optimum protection from the WHIPS sys-
tem (p. 36) the driver and passenger must
have the correct seating position and make
sure that the system's function is not obstruc-
ted.
Seating position
Set the correct seating position in the front
seat (p. 80) before driving starts.
Driver and front seat passenger should sit in
the centre of the seat with as little space as
possible between the head and the head
restraint.
Function
Do not leave any objects on the floor behind the
driver's seat/passenger seat that may prevent the
WHIPS system from functioning.
WARNING
Do not squeeze rigid objects between the
rear seat cushion and the front seat's
backrest. Make sure you do not to
obstruct the function of the WHIPS sys-
tem.
Do not place objects on the rear seat that may
prevent the WHIPS system from functioning.
WARNING
If a rear seat backrest is folded down, the
corresponding front seat must be moved
forward so that it does not make contact
with the folded backrest.
02 Safety
02
38
WARNING
If a seat has been subjected to extreme
forces, such as due to a rear-end collision,
the WHIPS system must be checked.
Volvo recommends that it is checked by
an authorised Volvo workshop.
Part of the WHIPS system's protective
capacity may have been lost even if the
seat appears to be undamaged.
Volvo recommends that you contact an
authorised Volvo workshop to have the
system checked even after a minor rear-
end collision.
When the systems deploy
In the event of a collision Volvo's different
personal safety systems work together in
order to minimise injury.
System Triggered
Seatbelt ten-
sioner (p. 28) front
seat
In the event of a
frontal collision,
and/or side-impact
collision, and/or
rear-end collision
and/or overturning
Seatbelt tensioner,
rear seat
In a frontal collision
and/or side-impact
accident and/or
overturning
Airbags
(Steering
wheel(p. 30) and
passenger airbag
(p. 31))
In a frontal colli-
sion
A
Side airbags
(SIPS) (p. 34)
In a side-impact
accident
A
System Triggered
Inflatable Curtain
IC (p. 35)
In the event of a
side-impact colli-
sion and/or certain
frontal collisions
A
Whiplash protection
WHIPS (p. 36)
In a rear-end colli-
sion
A
The bodywork of the car could be greatly deformed in a
collision without airbag deployment. A number of factors
such as the rigidity and weight of the object hit, the speed
of the car, the angle of the collision etc. affects how the
different safety systems of the car are activated.
If the airbags (p. 29) have deployed, the fol-
lowing is recommended:
Recovering the car. Volvo recommends
that you have it conveyed to an author-
ised Volvo workshop. Do not drive with
deployed airbags.
Volvo recommends that you engage an
authorised Volvo workshop to handle the
replacement of components in the car's
safety systems.
Always contact a doctor.
NOTE
The airbags and belt tensioner system are
deployed only once during a collision.
02 Safety
02
}}
39
WARNING
The airbag system's control module is
located in the centre console. If the centre
console is drenched with water or other
liquid, disconnect the battery cables. Do
not attempt to start the car since the air-
bags may deploy. Recovering the car.
Volvo recommends that you have it con-
veyed to an authorised Volvo workshop.
WARNING
Never drive with deployed airbags. They
can make steering difficult. Other safety
systems may also be damaged. The
smoke and dust created when the airbags
are deployed can cause skin and eye irrita-
tion/injury after intensive exposure. In case
of irritation, wash with cold water. The
rapid deployment sequence and airbag
fabric may cause friction and skin burns.
General information on safety mode
Safety mode is a protective state that is
enforced when the collision may have dam-
aged any of the car's vital functions, such as
the fuel lines, sensors for one of the safety
systems, or the brake system.
Warning triangle in the analogue combined
instrument panel.
Warning triangle in the digital combined instru-
ment panel.
If the car is involved in a collision, the text
Safety mode See manual may appear in the
combined instrument panel (p. 63) informa-
tion display. This means that the car has
reduced functionality.
WARNING
Never attempt to repair your car or reset
the electronics yourself if the car has been
in safety mode. This could result in per-
sonal injury or the car not functioning as
normal. Volvo recommends that you
engage an authorised Volvo workshop to
check and restore the car to normal status
after
Safety mode See manual has been
displayed.
||
02 Safety
02
40
Related information
Safety mode - attempting to start the car
(p. 40)
Safety mode - moving the car (p. 41)
Safety mode - attempting to start the
car
If the car is set in safety mode (p. 39) then an
attempt to start the car can be made if every-
thing seems normal and the absence of fuel
leakage has been checked.
First, check that no fuel is leaking from the
car. There must be no smell of fuel either.
If everything seems normal and you have
checked for indications of fuel leakage, you
may attempt to start the car.
Remove the remote control key and open the
driver's door. If a message is now shown to
the effect that the ignition is on, press the
start button. Then close the door and reinsert
the remote control key. The car's electronics
will now try to reset themselves to normal
mode. Then try to start the car.
If the message
Safety mode See manual is
still shown on the display then the car must
not be driven or towed but a vehicle recovery
service (p. 314) used instead. Even if the car
appears to be driveable, hidden damage may
make the car impossible to control once mov-
ing.
WARNING
Never, under any circumstances, attempt
to restart the car if it smells of fuel when
the
Safety mode See manual message
is displayed. Leave the car at once.
WARNING
If the car is in safety mode it must not be
towed. It must be transported from its
location. Volvo recommends that it is
transported to an authorised Volvo work-
shop.
Related information
Safety mode - moving the car (p. 41)
02 Safety
02
* Option/accessory, for more information, see Introduction.
41
Safety mode - moving the car
If Normal mode is shown after Safety mode
See manual has been reset after attempting
to start the car (p. 40) , the car can be moved
carefully out of a dangerous position.
Do not move the car further than necessary.
Related information
General information on safety mode
(p. 39)
General information on child safety
Children of all ages and sizes must always sit
correctly secured in the car. Never allow a
child to sit on the knee of a passenger.
Volvo recommends that children travel in
rear-facing child seats until as late an age as
possible, at least until 3-4 years of age, and
then front-facing booster cushions/child seats
until up to 10 years of age.
The position of a child in the car and the
choice of equipment are dictated by the
child's weight and size; see Child seats
(p. 42).
NOTE
Regulations regarding the placement of
children in cars vary from country to coun-
try. Check what does apply.
Volvo has child safety equipment (child seats,
booster cushions & attachment devices)
which is designed for your particular car.
Using Volvo's child safety equipment pro-
vides you with optimum conditions for your
child to travel safely in the car. Furthermore,
the child safety equipment fits and is easy to
use.
NOTE
In the event of questions when fitting child
safety products, contact the manufacturer
for clearer instructions.
Child safety locks
The rear doors and rear door windows* can
be blocked manually (p. 185) or electronically
(p. 186)* from opening from the inside.
Related information
Child seats - location (p. 47)
Child seat - ISOFIX (p. 51)
Child seats - upper mounting points
(p. 55)
02 Safety
02
42
Child seats
Children should sit comfortably and safely.
Make sure that the child seat is being used
correctly.
G020739
Child seats and airbags are not compatible.
NOTE
When using child safety products it is
important to read the installation instruc-
tions included.
WARNING
Do not secure the straps of the child seat
to the seat's horizontal adjustment bar,
springs or the rails and beams under the
seat. Sharp edges may damage the straps.
Look in the installation instructions for the
child seat for the correct fitting.
02 Safety
02
}}
43
Recommended child seats
2
Weight Front seat (with deactivated air-
bag)
Outer rear seat Centre rear seat
Group 0
max 10 kg
Group 0+
max 13 kg
Volvo infant seat (Volvo Infant Seat) - rear-facing
child seat, secured with the ISOFIX fixture system.
Type approval: E1 04301146
(L)
Group 0
max 10 kg
Group 0+
max 13 kg
Volvo infant seat (Volvo Infant Seat) -
rear-facing child seat, secured with the
car's seatbelt.
Type approval: E1 04301146
(U)
Volvo infant seat (Volvo Infant Seat) - rear-facing
child seat, secured with the car's seatbelt.
Type approval: E1 04301146
(U)
Volvo infant seat (Volvo Infant
Seat) - rear-facing child seat,
secured with the car's seatbelt.
Type approval: E1 04301146
(U)
Group 0
max 10 kg
Group 0+
max 13 kg
Rear-facing child seat (Child Seat) - rear-
facing child seat, secured with the car's
seatbelt and straps.
Type approval: E5 03135
(L)
Rear-facing child seat (Child Seat) - rear-facing
child seat, secured with the car's seatbelt and
straps.
Type approval: E5 03135
(L)
Rear-facing child seat (Child
Seat) - rear-facing child seat,
secured with the car's seatbelt
and straps.
Type approval: E5 03135
(L)
Group 0
max 10 kg
Group 0+
max 13 kg
Child seats which are universally
approved.
(U)
Child seats which are universally approved.
(U)
Child seats which are universally
approved.
(U)
2
With regard to other child seats your car should be included in the manufacturer's enclosed list of vehicles or be universally approved in accordance with the ECE R44 legal requirement.
||
02 Safety
02
44
Weight Front seat (with deactivated air-
bag)
Outer rear seat Centre rear seat
Group 1
9-18 kg
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rear-fac-
ing child seat, secured with the car's
seatbelt and straps.
Type approval: E5 04192
(L)
Volvo rear-facing/turnable child seat (Volvo
Convertible Child Seat) - rear-facing child seat,
secured with the car's seatbelt and straps.
Type approval: E5 04192
(L)
Group 1
9-18 kg
Rear-facing child seat (Child Seat) - rear-
facing child seat, secured with the car's
seatbelt and straps.
Type approval: E5 03135
(L)
Rear-facing child seat (Child Seat) - rear-facing
child seat, secured with the car's seatbelt and
straps.
Type approval: E5 03135
(L)
Rear-facing child seat (Child
Seat) - rear-facing child seat,
secured with the car's seatbelt
and straps.
Type approval: E5 03135
(L)
Group 1
9-18 kg
Britax Fixway – rear-facing child seat, secured with
the ISOFIX fixture system and straps.
Type approval: E5 03171
(L)
Group 1
9-18 kg
Child seats which are universally
approved.
(U)
Child seats which are universally approved.
(U)
Child seats which are universally
approved.
(U)
02 Safety
02
}}
45
Weight Front seat (with deactivated air-
bag)
Outer rear seat Centre rear seat
Group 2
15-25 kg
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - rear-fac-
ing child seat, secured with the car's
seatbelt and straps.
Type approval: E5 04192
(L)
Volvo rear-facing/turnable child seat (Volvo
Convertible Child Seat) - rear-facing child seat,
secured with the car's seatbelt and straps.
Type approval: E5 04192
(L)
Volvo rear-facing/turnable child
seat (Volvo Convertible Child
Seat) - rear-facing child seat,
secured with the car's seatbelt
and straps.
Type approval: E5 04192
(L)
Group 2
15-25 kg
Volvo rear-facing/turnable child seat
(Volvo Convertible Child Seat) - front-fac-
ing child seat, secured with the car's
seatbelt.
Type approval: E5 04191
(U)
Volvo rear-facing/turnable child seat (Volvo
Convertible Child Seat) - front-facing child seat,
secured with the car's seatbelt.
Type approval: E5 04191
(U)
Group 2/3
15-36 kg
Volvo booster seat with backrest (Volvo
Booster Seat with backrest).
Type approval: E1 04301169
(UF)
Volvo booster seat with backrest (Volvo Booster
Seat with backrest).
Type approval: E1 04301169
(UF)
Volvo booster seat with backrest
(Volvo Booster Seat with
backrest).
Type approval: E1 04301169
(UF)
Group 2/3
15-36 kg
Booster cushion with and without back-
rest (Booster Cushion with and without
backrest).
Type approval: E5 04216
(UF)
Booster cushion with and without backrest
(Booster Cushion with and without backrest).
Type approval: E5 04216
(UF)
Booster cushion with and with-
out backrest (Booster Cushion
with and without backrest).
Type approval: E5 04216
(UF)
||
02 Safety
02
46
Weight Front seat (with deactivated air-
bag)
Outer rear seat Centre rear seat
Group 2/3
15-36 kg
Integrated booster cushion (Integrated Booster
Cushion) - available as a factory fitted option.
Type approval: E5 04189
(B)
L: Suitable for specific child seats. These child seats may be intended for use in a special car model, limited or semi-universal categories.
U: Suitable for universally approved child seats in this weight class.
UF: Suitable for front-facing universally approved child seats in this weight class.
B: Built-in child seats approved for this weight class.
Related information
Child seats - location (p. 47)
Child seats - upper mounting points
(p. 55)
Child seat - ISOFIX (p. 51)
General information on child safety (p. 41)
02 Safety
02
47
Child seats - location
Always fit child seats/booster cushions (p. 42)
in the rear seat if the passenger airbag is acti-
vated (p. 32). If a child is sitting on the front
passenger seat then he/she could suffer seri-
ous injury if the airbag deploys.
The warning label for the passenger airbag is
fitted in one of the following two locations in
the car:
Alternative 1: Position of airbag label on passen-
ger side sun visor.
Alternative 2: Position of airbag label on passen-
ger side door pillar. The label becomes visible
when the passenger door is opened.
You may place:
a child seat/booster cushion on the front
passenger seat provided there is no acti-
vated airbag on the front passenger side.
one or more child seats/booster cushions
in the rear seat.
WARNING
Never use a rear-facing child seat on a
seat protected by an activated airbag. Fail-
ure to follow this advice can lead to death
or serious injury to the child.
WARNING
Never place a child in a child seat or on a
booster cushion in the front seat if the air-
bag is activated.
Never allow anybody to stand or sit in front
of the front passenger seat.
No one shorter than 140 cm should ever
sit in the front passenger seat if the airbag
is activated.
Failure to follow the advice given above
can endanger life.
WARNING
Booster cushions/child seats with steel
braces or some other design that could
rest on the seatbelt buckle's opening but-
ton must not be used, as they could cause
the seatbelt buckle to open accidentally.
Do not allow the upper section of the child
seat to rest against the windscreen.
Related information
General information on child safety (p. 41)
Child seats - upper mounting points
(p. 55)
Child seat - ISOFIX (p. 51)
02 Safety
02
48
* Option/accessory, for more information, see Introduction.
Child seat - two-stage booster seat*
The integrated booster seats in the rear seat
allow children to sit comfortably and safely.
The booster cushions are specially designed
to provide optimum safety. In combination
with the seatbelt (p. 25) they are approved for
children who weigh between 15 and 36 kg
and who are at least 95 cm in height.
G017875
Correct position, the seatbelt is positioned above
the shoulder.
Incorrect position, the head must not be posi-
tioned above the head restraint and the seatbelt
must not be below the shoulder.
Check before driving that:
the integrated two-stage booster seat is
correctly set in accordance with the table
(p. 49) and in locked position
the seatbelt is in contact with the child's
body and is not slack or twisted
the seatbelt does not lie across the
child's throat or below the shoulder (see
preceding illustrations)
the lap section of the seatbelt is posi-
tioned low over the pelvis to provide opti-
mal protection.
Adjusting the booster seat's two levels is per-
formed by raising (p. 49) and lowering
(p. 50).
WARNING
Volvo recommends that repair or replace-
ment is only carried out by an authorised
Volvo workshop. Do not make any modifi-
cations or additions to the booster cush-
ion. If an integrated booster cushion has
been subjected to a major load, such as in
conjunction with a collision, the entire
booster cushion must be replaced. Even if
the booster cushion appears to be undam-
aged, it may not afford the same level of
protection. The booster cushion must also
be replaced if it is heavily worn.
WARNING
If the instructions for the two-stage
booster seat are not followed then the
child could sustain serious injury in the
event of an accident.
02 Safety
02
}}
* Option/accessory, for more information, see Introduction.
49
Two-stage booster seat* - raising
The integrated booster seat (p. 48) in the rear
seat can be folded up into two stages. How
many stages the cushion should be folded up
depends on the child's weight.
Stage 1 Stage 2
Weight 22-36 kg 15-25 kg
Stage 1
3
Pull the handle forward and up in order to
release the booster cushion.
G017697
Press the booster cushion backwards to
lock.
Stage 2
4
Start from the lower stage. Press the but-
ton.
3
Lower stage.
4
Upper stage.
||
02 Safety
02
50
* Option/accessory, for more information, see Introduction.
G017784
Lift the booster cushion up at the front
edge and press it back against the back-
rest to lock.
NOTE
It is not possible to adjust the booster seat
from stage 2 to stage 1. It must first be
reset by being fully folded down (p. 50)
into the seat cushion.
Related information
Two-stage booster seat* - lowering
(p. 50)
Two-stage booster seat* - lowering
The integrated booster seat (p. 48) in the rear
seat can be folded down from the upper or
lower stage to fully lowered position in the
seat cushion. However, it is not possible to
adjust the booster cushion from the upper
stage to the lower stage.
Pull the handle forwards to release the
cushion.
Press down with your hand in the centre
of the cushion in order to lock it.
IMPORTANT
Check that there are no loose objects (e.g.
toys) left behind in the space under the
cushion before lowering.
NOTE
When folding the rear backrest the booster
seat must first be lowered.
Related information
Two-stage booster seat* - raising (p. 49)
02 Safety
02
}}
51
Child seat - ISOFIX
ISOFIX is a fixture system for car child seats
(p. 42) that is based on an international stand-
ard.
Mounting points for the ISOFIX fixture system
are concealed behind the lower section of the
rear seat backrest, in the outer seats.
The location of the mounting points is indi-
cated by symbols in the backrest upholstery
(see preceding illustration).
Press the seat cushion down to access the
mounting points.
Always follow the manufacturer's installation
instructions when connecting a child seat to
the ISOFIX mounting points.
Related information
ISOFIX - size classes (p. 51)
ISOFIX - types of child seat (p. 53)
General information on child safety (p. 41)
ISOFIX - size classes
There is a size classification for child seats
using the ISOFIX (p. 51) fixture system in
order to assist users in choosing the correct
type of child seat (p. 53).
Size
class
Description
A Full size, front-facing child
seat
B Reduced size (alt. 1), front-
facing child seat
B1 Reduced size (alt.2), front-fac-
ing child seat
C Full size, rear-facing child seat
D Reduced size, rear-facing
child seat
E Rear-facing infant seat
F Transverse infant seat, left-
hand
G Transverse infant seat, right-
hand
||
02 Safety
02
52
WARNING
Never place the child in the passenger
seat if the car is fitted with an activated air-
bag.
NOTE
If an ISOFIX child seat has no size classifi-
cation, the car model must be included on
the vehicle list for the child seat.
NOTE
Volvo recommends that you contact an
authorised Volvo dealer for recommenda-
tions about which ISOFIX child seats Volvo
recommends.
02 Safety
02
}}
53
ISOFIX - types of child seat
Child seats are in different sizes – cars are in
different sizes. This means that not all child
seats are suitable for all seats in all car mod-
els.
Type of child seat Weight Size class Passenger seats for ISOFIX installation of child seats
Front seat Outer rear seat
Infant seat transverse max 10 kg F X X
G X X
Infant seat, rear-facing max 10 kg E X OK
(IL)
Infant seat, rear-facing max 13 kg E X OK
(IL)
D X OK
(IL)
C X OK
(IL)
Child seat, rear-facing 9-18 kg D X OK
(IL)
C X OK
(IL)
||
02 Safety
02
54
Type of child seat Weight Size class Passenger seats for ISOFIX installation of child seats
Front seat Outer rear seat
Front-facing child seat 9-18 kg B X
OK
A
(IUL)
B1 X
OK
A
(IUL)
A X
OK
A
(IUL)
X: The ISOFIX position is not suitable for ISOFIX child seats in this weight class and/or size class.
IL: Suitable for specific ISOFIX child seats. These child seats may be intended for use in a special car model, limited or semi-universal catego-
ries.
IUF: Suitable for front-facing ISOFIX child seats that are universally approved in this weight class.
A
Volvo recommends rear-facing child seats for this group.
Make sure you select the right size class
(p. 51) of child seat with ISOFIX (p. 51) fixture
system.
02 Safety
02
55
Child seats - upper mounting points
The car is equipped with upper mounting
points for certain front-facing child seats
(p. 42). These mounting points are located on
the rear of the seat.
The upper mounting points are primarily
intended for use with front-facing child seats.
Volvo recommends that small children should
sit in rear-facing child seats to as late an age
as possible.
NOTE
Fold the head restraints in order to facili-
tate fitting this type of child seat in cars
with folding head restraints on the outer
seats.
NOTE
In cars with a cargo cover over the lug-
gage compartment, this must be removed
before child seats can be attached to the
securing points.
For detailed information on how the child seat
should be tensioned in the upper mounting
points, see the seat manufacturer's instruc-
tions.
WARNING
The child seat's straps must always be
drawn through the hole in the head
restraint leg before they are tensioned at
the attachment point.
Related information
General information on child safety (p. 41)
Child seats - location (p. 47)
Child seat - ISOFIX (p. 51)
INSTRUMENTS AND CONTROLS
03 Instruments and controls
03
}}
57
Instruments and controls, left-hand
drive car - overview
The overview shows where the car's displays
and controls are located.
||
03 Instruments and controls
03
58
Overview, left-hand drive cars
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
59
Function See
Menus and mes-
sages, direction
indicators, main/
dipped beam, trip
computer
(p. 110),
(p. 113),
(p. 94),
(p. 89) and
(p. 124).
Manual gear chang-
ing in an automatic
gearbox*
(p. 270).
Cruise control* (p. 199) and
(p. 201).
Horn, airbags (p. 84) and
(p. 29).
Combined instru-
ment panel
(p. 63).
Menu navigation,
audio control,
phone control*
(p. 113) and
the Sensus
Infotainment
supplement.
START/STOP
ENGINE button
(p. 261).
Ignition switch (p. 78).
Screen for infotain-
ment system and
display of menus
(p. 113) and
the Sensus
Infotainment
supplement.
Function See
Hazard warning
flashers
(p. 93).
Door handle
Control panel (p. 180),
(p. 186),
(p. 103) and
(p. 105).
Control panel for
infotainment system
and menu naviga-
tion
(p. 113) and
the Sensus
Infotainment
supplement.
Control panel for cli-
mate control
(p. 133).
Gear selector (p. 269),
(p. 270) or
(p. 274).
Controls for active
chassis (Four-C)*
(p. 192).
Wipers and washing (p. 101).
Steering wheel
adjustment
(p. 84).
Parking brake (p. 292).
Bonnet opener (p. 353).
Function See
Seat adjustment* (p. 81).
Headlamp control,
opener for fuel filler
flap and tailgate
(p. 86),
(p. 299) and
(p. 182).
Related information
Outside temperature gauge (p. 72)
Trip meter (p. 72)
Clock (p. 73)
03 Instruments and controls
03
60
Instruments and controls, right-hand
drive car - overview
The overview shows where the car's displays
and controls are located.
03 Instruments and controls
03
}}
61
Overview, right-hand drive cars
||
03 Instruments and controls
03
62
* Option/accessory, for more information, see Introduction.
Function See
Hazard warning
flashers
(p. 93).
Screen for infotain-
ment system and
display of menus
(p. 113) and
the Sensus
Infotainment
supplement.
START/STOP
ENGINE button
(p. 261).
Ignition switch (p. 78).
Manual gear chang-
ing in an automatic
gearbox*
(p. 270).
Cruise control* (p. 199) and
(p. 201).
Combined instru-
ment panel
(p. 63).
Horn, airbags (p. 84) and
(p. 29).
Menu navigation,
audio control,
phone control*
(p. 113) and
the Sensus
Infotainment
supplement.
Wipers and washing (p. 101).
Function See
Headlamp control,
opener for fuel filler
flap and tailgate
(p. 86),
(p. 299) and
(p. 182).
Door handle
Control panel (p. 180),
(p. 186),
(p. 103) and
(p. 105).
Seat adjustment* (p. 81).
Bonnet opener (p. 353).
Parking brake (p. 292).
Steering wheel
adjustment
(p. 84).
Menus and mes-
sages, direction
indicators, main/
dipped beam, trip
computer
(p. 110),
(p. 113),
(p. 94),
(p. 89) and
(p. 124).
Controls for active
chassis (Four-C)*
(p. 192).
Gear selector (p. 269),
(p. 270) or
(p. 274).
Function See
Control panel for cli-
mate control
(p. 133).
Control panel for
infotainment system
and menu naviga-
tion
(p. 113) and
the Sensus
Infotainment
supplement.
Related information
Outside temperature gauge (p. 72)
Trip meter (p. 72)
Clock (p. 73)
03 Instruments and controls
03
}}
63
Combined instrument panel
The combined instrument panel's information
display shows information on some of the
car's functions, as well as messages.
Analogue combined instrument panel -
overview (p. 63)
Digital combined instrument panel - over-
view (p. 64)
Combined instrument panel - meaning of
indicator symbols (p. 68)
Combined instrument cluster - meaning
of warning symbols (p. 70)
Analogue combined instrument panel
- overview
The combined instrument panel's information
display shows information on some of the
car's functions, as well as messages.
Information display
Information display, analogue instrument panel.
The combined instrument panel's information
display shows information on some of the
car's functions, e.g. cruise control and trip
computer, as well as messages. The informa-
tion is shown with symbols and text. There
are further descriptions under the functions
that use the display.
Gauges and indicators
Fuel gauge. When the indicator lowers to
only one white marking
1
, the yellow indi-
cator symbol for low level in the fuel tank
is illuminated. See also Trip computer -
supplementary information (p. 124) and
Filling up with fuel (p. 299).
Eco meter The meter provides an indica-
tion of how economically the car is being
driven. The higher the reading on the
scale, the more economical it is.
Speedometer
1
When the display's message "Distance to empty fuel tank:" starts to show "
----", the marking becomes red.
||
03 Instruments and controls
03
64
* Option/accessory, for more information, see Introduction.
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Gear shift indicator
2
/Gear position indica-
tor
3
See also Gear shift indicator*
(p. 269), Automatic gearbox --
Geartronic* (p. 270) or Automatic gear-
box -- Powershift* (p. 274).
Indicator and warning symbols
Indicator and warning symbols, analogue instru-
ment panel.
Indicator symbols
Indicator and warning symbols
Warning symbols
4
Functionality check
All indicator and warning symbols, apart from
symbols in the centre of the information dis-
play, illuminate in key position II or when the
engine is started. When the engine has
started, all the symbols should go out except
the parking brake symbol, which only goes
out when the brake is disengaged.
If the engine does not start or if the function-
ality check is carried out in key position II
then all symbols go out within a few seconds
except the symbol for faults in the car's emis-
sions system and the symbol for low oil pres-
sure.
Related information
Combined instrument panel (p. 63)
Combined instrument panel - meaning of
indicator symbols (p. 68)
Combined instrument cluster - meaning
of warning symbols (p. 70)
Digital combined instrument panel -
overview
The combined instrument panel's information
display shows information on some of the
car's functions, as well as messages.
Information display
Information display, digital instrument panel*.
The combined instrument panel's information
display shows information on some of the
car's functions, e.g. cruise control and trip
computer, as well as messages. The informa-
tion is shown with symbols and text. There
are further descriptions under the functions
that use the display.
2
Manual gearbox.
3
Automatic gearbox.
4
Certain engine variants do not have systems to warn of oil pressure loss. In cars with these variants the symbol for low oil pressure is not used. Warning for low oil level is via display text. For
more information, see Engine oil - general (p. 355).
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
65
Gauges and indicators
Alternative themes can be selected for the
digital combined instrument panel. Possible
themes are "Elegance", "Eco" and
"Performance".
A theme can only be selected when the
engine is running.
To select the theme, press the left-hand stalk
switch's OK button and select the
Themes
menu option by turning the thumbwheel on
the lever. Press the OK button. Turn the
thumbwheel to select the theme and confirm
the selection by pressing the OK button.
On certain model variants, the appearance of
the centre console's screen follows the theme
selected for the combined instrument panel.
The contrast mode and colour mode for the
instrument can also be set using the left-hand
stalk switch.
For more information on menu navigation,
see Menu navigation - combined instrument
panel (p. 110).
The choice of theme and setting of contrast
mode and colour mode can be stored for
each remote control key in the car key mem-
ory*, see Remote control key - personalisa-
tion* (p. 165).
Gauges and indicators, theme "Elegance".
Fuel gauge. When the indicator lowers to
only one white marking
5
, the yellow indi-
cator symbol for low level in the fuel tank
is illuminated. See also Trip computer -
supplementary information (p. 124) and
Filling up with fuel (p. 299).
Temperature gauge for engine coolant
Speedometer
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Gear shift indicator
6
/Gear position indica-
tor
7
See also Gear shift indicator*
(p. 269), Automatic gearbox --
Geartronic* (p. 270) or Automatic gear-
box -- Powershift* (p. 274).
Gauges and indicators, theme "Eco".
Fuel gauge. When the indicator lowers to
only one white marking
5
, the yellow indi-
cator symbol for low level in the fuel tank
is illuminated. See also Trip computer -
supplementary information (p. 124) and
Filling up with fuel (p. 299).
Eco guide. See also Eco guide & Power
guide* (p. 67).
Speedometer
5
When the display's message "Distance to empty fuel tank:" starts to show "
----", the marking becomes red.
6
Manual gearbox.
7
Automatic gearbox.
||
03 Instruments and controls
03
66
* Option/accessory, for more information, see Introduction.
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Gear shift indicator
6
/Gear position indica-
tor
7
. See also Gear shift indicator*
(p. 269), Automatic gearbox --
Geartronic* (p. 270) or Automatic gear-
box -- Powershift* (p. 274).
Gauges and indicators, theme "Performance".
Fuel gauge. When the indicator lowers to
only one white marking
5
, the yellow indi-
cator symbol for low level in the fuel tank
is illuminated. See also Trip computer -
supplementary information (p. 124) and
Filling up with fuel (p. 299).
Temperature gauge for engine coolant
Speedometer
Tachometer. The meter indicates engine
speed in thousands of revolutions per
minute (rpm).
Power guide. See also Eco guide &
Power guide* (p. 67).
Gear shift indicator
6
/Gear position indica-
tor
7
. See also Gear shift indicator*
(p. 269), Automatic gearbox --
Geartronic* (p. 270) or Automatic gear-
box -- Powershift* (p. 274).
Indicator and warning symbols
Indicator and warning symbols, digital instrument
panel.
Indicator symbols
Indicator and warning symbols
Warning symbols
8
6
Manual gearbox.
7
Automatic gearbox.
5
When the display's message "Distance to empty fuel tank:" starts to show "
----", the marking becomes red.
8
Certain engine variants do not have systems to warn of oil pressure loss. In cars with these variants the symbol for low oil pressure is not used. Warning for low oil level is via display text. For
more information, see Engine oil - general (p. 355).
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
67
Functionality check
All indicator and warning symbols, apart from
symbols in the centre of the information dis-
play, illuminate in key position II or when the
engine is started. When the engine has
started, all the symbols should go out except
the parking brake symbol, which only goes
out when the brake is disengaged.
If the engine does not start or if the function-
ality check is carried out in key position II
then all symbols go out within a few seconds
except the symbol for faults in the car's emis-
sions system and the symbol for low oil pres-
sure.
Related information
Combined instrument panel (p. 63)
Combined instrument panel - meaning of
indicator symbols (p. 68)
Combined instrument cluster - meaning
of warning symbols (p. 70)
Eco guide & Power guide*
Eco guide and Power guide are two com-
bined instrument panel (p. 63) instruments
which help the driver to drive the car with
optimum driving economy.
The car also stores statistics of journeys
made, which can be viewed in the form of a
block diagram; see Trip computer - trip statis-
tics* (p. 125).
Eco guide
This instrument provides an indication of how
economically the car is being driven.
To view this function, select the theme "Eco";
see Digital combined instrument panel - over-
view (p. 64).
Instantaneous value
Average value
Instantaneous value
The instantaneous value is shown here - the
higher the reading on the scale, the better.
The instantaneous value is calculated based
on speed, engine speed, engine power uti-
lised plus use of the foot brake.
Optimum speed (50-80 km/h) and low engine
speeds are encouraged. The pointers fall dur-
ing acceleration and braking.
Very low instantaneous values illuminate the
red zone on the meter (with a short delay),
which means poor driving economy and
hence should be avoided.
Average value
The average value slowly follows the instanta-
neous value and describes how the car has
been driven most recently. The higher the
pointers on the scale, the better the economy
achieved by the driver.
Power guide
This instrument shows the relationship
between how much power (Power) is being
taken from the engine and how much power
is available.
To view this function, select the theme
"Performance"; see Digital combined instru-
ment panel - overview (p. 64).
||
03 Instruments and controls
03
68
* Option/accessory, for more information, see Introduction.
Available engine power
Engine power utilised
Available engine power
The smaller, upper pointer shows the availa-
ble engine power
9
. The higher the reading on
the scale, the more power is available in the
current gear.
Engine power utilised
The larger, lower pointer shows the engine
power utilised
9
. The higher the reading on the
scale, the more power is being taken from the
engine.
A large gap between the two pointers indi-
cates a large power reserve.
Combined instrument panel -
meaning of indicator symbols
The indicator symbols alert the driver that a
function is activated, that the system is oper-
ating, or that an error or failure has occurred.
Indicator symbols
Symbol Specification
ABL fault
Emissions system
ABS fault
Rear fog lamp on
Stability system, see Electronic
stability control (ESC) - general
(p. 192)
Stability system, sport mode,
see Electronic stability control
(ESC) - operation (p. 193)
Engine preheater (diesel)
Low level in fuel tank
Symbol Specification
Information, read display text
Main beam On
Left-hand direction indicator
Right-hand direction indicator
Eco- function on, see ECO*
(p. 288)
Start/Stop, the engine auto-
stopped; see Start/Stop* -
function and operation (p. 280)
Tyre pressure system , see
Tyre pressure monitoring*
(p. 328)
ABL fault
The symbol illuminates if a fault has arisen in
the ABL function (Active Bending Lights).
Emissions system
If the symbol illuminates after the engine has
been started then it may be due to a fault in
the car's emissions system. Drive to a work-
shop for checking. Volvo recommends that
you seek assistance from an authorised Volvo
workshop.
9
Power is dependent on engine speed.
03 Instruments and controls
03
}}
69
ABS fault
If this symbol illuminates then the system is
not working. The car's regular brake system
continues to work, but without the ABS func-
tion.
1. Stop the car in a safe place and turn off
the engine.
2. Restart the engine.
3. If the symbol remains illuminated, drive to
a workshop to have the ABS system
checked. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Rear fog lamp on
This symbol illuminates when the rear fog
lamp is switched on.
Stability system
A flashing symbol indicates that the stability
system is operating. If the symbol illuminates
with constant glow then there is a fault in the
system.
Stability system, sport mode
Sport mode allows for a more active driving
experience. The system then detects whether
the accelerator pedal, steering wheel move-
ments and cornering are more active than in
normal driving and then allows controlled
skidding of the rear section up to a certain
level before it intervenes and stabilises the
car. The symbol illuminates when the sport
mode is activated.
Engine preheater (diesel)
This symbol illuminates during engine pre-
heating. Preheating takes place mostly due to
low temperature.
Low level in fuel tank
When the symbol illuminates the level in the
fuel tank is low, refuel as soon as possible.
Information, read display text
When one of the car's systems does not
behave as intended, this information symbol
illuminates and a text appears on the informa-
tion display. The message text is cleared with
the OK button, see Menu navigation - com-
bined instrument panel (p. 110), or it disap-
pears automatically after a time (time
depending on which function is indicated).
The information symbol can also illuminate in
conjunction with other symbols.
NOTE
When a service message is shown, the
symbol and message are cleared using the
OK button, or disappear automatically
after a time.
Main beam On
The symbol illuminates when main beam is on
and with main beam flash.
Left/right-hand direction indicator
Both direction indicator symbols flash when
the hazard warning flashers are used.
Eco function on
This symbol illuminates when the Eco func-
tion is activated.
Start/Stop
The symbol shines when the engine is auto-
stopped.
Tyre pressure system
The symbol illuminates in the event of low
tyre pressure, or if a fault arises in the tyre
pressure system.
||
03 Instruments and controls
03
70
* Option/accessory, for more information, see Introduction.
Reminder – doors not closed
If one of the doors is not closed properly then
the information or warning symbol illuminates
together with an explanatory image in the
information display. Stop the car in a safe
place as soon as possible and close the door
that is open.
If the car is driven at a speed lower
than approx. 7 km/h then the informa-
tion symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
If the bonnet
10
is not closed properly then the
warning symbol illuminates together with an
explanatory image in the information display.
Stop the car in a safe place as soon as possi-
ble and close the bonnet.
If the tailgate is not closed properly then the
information symbol illuminates together with
an explanatory image in the information dis-
play. Stop the car in a safe place as soon as
possible and close the tailgate.
Related information
Combined instrument panel (p. 63)
Combined instrument cluster - meaning
of warning symbols (p. 70)
Digital combined instrument panel - over-
view (p. 64)
Combined instrument cluster -
meaning of warning symbols
The warning symbols alert the driver that an
important function is activated, or that a seri-
ous error or a serious failure has occurred.
Warning symbols
Symbol Specification
Low oil pressure
A
Parking brake applied, digital
instrument panel
Parking brake applied, ana-
logue instrument panel
Airbags – SRS
Seatbelt reminder
Alternator not charging
Fault in brake system
Warning
A
Certain engine variants do not have systems to warn of oil
pressure loss. In cars with these variants the symbol for
low oil pressure is not used. Warning for low oil level is via
display text. For more information, see Engine oil - general
(p. 355).
Low oil pressure
If this symbol illuminates during driving then
the engine's oil pressure is too low. Stop the
engine immediately and check the engine oil
level, top up if necessary. If the symbol illumi-
nates and the oil level is normal, contact a
workshop. Volvo recommends that you seek
assistance from an authorised Volvo work-
shop.
Parking brake applied
This symbol illuminates with a constant glow
when the parking brake is applied. The sym-
bol flashes during application, and then
changes over to a constant glow.
A flashing symbol in any other situation
means that a fault has arisen. Read the mes-
sage on the information display.
For more information, see Parking brake
(p. 292).
Airbags – SRS
If this symbol remains illuminated or illumi-
nates while driving, it means a fault has been
detected in the seatbelt buckle, SRS, SIPS, or
IC systems. Drive immediately to a workshop
to have the system checked. Volvo recom-
mends that you seek assistance from an
authorised Volvo workshop.
Seatbelt reminder
This symbol flashes if someone in a front seat
has not put on their seatbelt or if someone in
a rear seat has taken off their seatbelt.
10
Only cars with alarm*.
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
71
Alternator not charging
This symbol illuminates during driving if a
fault has occurred in the electrical system.
Visit a workshop. Volvo recommends that you
seek assistance from an authorised Volvo
workshop.
Fault in brake system
If this symbol illuminates, the brake fluid level
may be too low. Stop the car in a safe place
and check the level in the brake fluid reser-
voir; see Brake and clutch fluid - level
(p. 361).
If the brake and ABS symbols illuminate at
the same time, there may be a fault in the
brake force distribution system.
1. Stop the car in a safe place and turn off
the engine.
2. Restart the engine.
If both symbols extinguish, continue
driving.
If the symbols remain illuminated,
check the level in the brake fluid reser-
voir; see Brake and clutch fluid - level
(p. 361). If the brake fluid level is nor-
mal but the symbols are still illumi-
nated, the car can be driven, with great
care, to a workshop to have the brake
system checked. Volvo recommends
that you seek assistance from an
authorised Volvo workshop.
WARNING
If the brake fluid is under the MIN level in
the brake fluid reservoir, do not drive fur-
ther before topping up the brake fluid.
The loss of brake fluid must be investiga-
ted by a workshop. Volvo recommends
that you contact an authorised Volvo
workshop.
WARNING
If the BRAKE and ABS symbols are lit at
the same time, there is a risk that the rear
end will skid during heavy braking.
Warning
The red warning symbol illuminates when a
fault has been indicated which could affect
the safety and/or driveability of the car. An
explanatory text is shown on the information
display at the same time. The symbol remains
visible until the fault has been rectified but the
text message can be cleared with the OK
button; see Menu navigation - combined
instrument panel (p. 110). The warning sym-
bol can also illuminate in conjunction with
other symbols.
Action:
1. Stop in a safe place. Do not drive the car
further.
2. Read the information on the information
display. Implement the action in accord-
ance with the message in the display.
Clear the message using the OK button.
Reminder – doors not closed
If one of the doors is not closed properly then
the information or warning symbol illuminates
together with an explanatory image in the
information display. Stop the car in a safe
place as soon as possible and close the door
that is open.
If the car is driven at a speed lower
than approx. 7 km/h then the informa-
tion symbol illuminates.
If the car is driven at a speed higher
than approx. 7 km/h then the warning
symbol illuminates.
If the bonnet
11
is not closed properly then the
warning symbol illuminates together with an
explanatory image in the information display.
Stop the car in a safe place as soon as possi-
ble and close the bonnet.
If the tailgate is not closed properly then the
information symbol illuminates together with
an explanatory image in the information dis-
play. Stop the car in a safe place as soon as
possible and close the tailgate.
11
Only cars with alarm*.
||
03 Instruments and controls
03
72
Related information
Combined instrument panel (p. 63)
Combined instrument panel - meaning of
indicator symbols (p. 68)
Digital combined instrument panel - over-
view (p. 64)
Outside temperature gauge
The display for the outside temperature gauge
appears in the combined instrument panel.
Display for outside temperature gauge,
digital instrument panel
Display for outside temperature gauge,
analogue instrument panel
When the temperature lies between +2 °C to
-5 °C a snowflake symbol illuminates in the
display. This warns of icy roads. If the car has
been stationary, the gauge may display a
reading that is too high.
Related information
Combined instrument panel (p. 63)
Trip meter
The trip meter display appears in the com-
bined instrument panel.
Trip meter, digital instrument.
Display for trip meter
12
The two trip meters
T1 and T2 are used for
measuring short distances. The distance is
shown in the display.
Turn the left stalk switch thumbwheel to show
the required meter.
A long press (until the change occurs) on the
left-hand stalk switch's RESET button resets
the trip meter shown. For more information,
see Trip computer - supplementary informa-
tion (p. 124).
Related information
Combined instrument panel (p. 63)
12
Display appearance may differ depending on instrument variant.
03 Instruments and controls
03
}}
73
Clock
The clock display appears in the combined
instrument panel.
Clock, digital instrument panel.
Display for showing the time
13
Set the clock
The clock can be adjusted in the menu sys-
tem MY CAR, see MY CAR (p. 113).
Related information
Combined instrument panel (p. 63)
Combined instrument panel - licenses
A license is an agreement for the right to
operate a certain activity or the right to use
someone else's entitlement according to the
terms and conditions in the agreement. The
following text is Volvo's agreement with the
manufacturer/developer.
Combined Instrument Panel Software
Open Source Software Notice
This product uses certain free / open source
and other software originating from third
parties, that is subject to the GNU Lesser
General Public License version 2 (LGPLv2),
The FreeType Project License ("FreeType
License") and other different and/or additional
copy right licenses, disclaimers and notices.
The links to access the exact terms of
LGPLv2, and the other open source software
licenses, disclaimers, acknowledgements and
notices are provided to you below. Please
refer to the exact terms of the relevant
License, regarding your rights under said
licenses. Volvo Car Corporation (VCC) offers
to provide the source code of said free/open
source software to you for a charge covering
the cost of performing such distribution, such
as the cost of media, shipping and handling,
upon written request. Please contact your
nearest Volvo Dealer.
The offer is valid for a period of at least three
(3) years from the date of the distribution of
this product by VCC / or for as long as VCC
offers spare parts or customer support.
Portions of this product uses software
copyrighted © 2007 The FreeType Project
(www.freetype.org). All rights reserved.
Portions of this product uses software with
Copyright © 1994–2013 Lua.org, PUC-Rio
(http://www.lua.org/)
This product includes software under
following licenses:
LGPL v2.1: http://www.gnu.org/licenses/old-
licenses/lgpl-2.1.html
GNU FriBidi
DevIL
The FreeType Project License: http://
git.savannah.gnu.org/cgit/freetype/
freetype2.git/tree/docs/FTL.TXT
FreeType 2
13
The time is shown in the centre of an analogue instrument panel.
03 Instruments and controls
03
74
* Option/accessory, for more information, see Introduction.
MIT License: http: http://opensource.org/
licenses/mit-license.html
Lua
Symbols in the display
There are a variety of different symbols in the
display in the car. The symbols are divided
into warning, indicator and information sym-
bols.
Shown below are the most common symbols
with their meanings and a reference to where
in the manual further information can be
found.
- Red warning symbol, illuminates
when a fault has been indicated which could
affect the safety and/or driveability of the car.
An explanatory text is shown in the informa-
tion display in the combined instrument panel
at the same time.
- Information symbol, illuminates in
combination with text in the information dis-
play in the combined instrument panel, when
a deviation in any of the car's systems has
occurred. The information symbol can also
illuminate in conjunction with other symbols.
Warning symbols in the combined
instrument panel
Symbol Specification See
Low oil pressure (p. 70)
Parking brake
applied
(p. 70),
(p. 292)
Symbol Specification See
Parking brake
applied, alterna-
tive symbol
(p. 70)
Airbags – SRS (p. 28),
(p. 70)
Seatbelt
reminder
(p. 25),
(p. 70)
Alternator not
charging
(p. 70)
Fault in brake
system
(p. 70),
(p. 290)
Warning, safety
mode
(p. 28),
(p. 39),
(p. 70),
(p. 274)
Control symbols in the combined
instrument panel
Symbol Specification See
ABL fault* (p. 68),
(p. 92)
Emissions sys-
tem
(p. 68)
ABS fault (p. 68),
(p. 290)
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
75
Symbol Specification See
Rear fog lamp on (p. 68),
(p. 92)
Stability system,
ESC (Electronic
Stability Control),
Hill descent con-
trol
(p. 68),
(p. 278),
(p. 194),
Stability system,
sport mode
(p. 68),
(p. 194)
Engine preheater
(diesel)
(p. 68)
Low level in fuel
tank
(p. 68),
(p. 146)
Information, read
display text
(p. 68)
Main beam On (p. 68),
(p. 89)
Left-hand direc-
tion indicators
(p. 68)
Right-hand
direction indica-
tors
(p. 68)
Start/Stop*,
engine auto-
stopped
(p. 68),
(p. 286)
Symbol Specification See
ECO function* on (p. 68),
(p. 288)
Tyre pressure
system*
(p. 68),
(p. 328)
Information symbols in the combined
instrument panel
Symbol Specification See
Cruise control* (p. 199)
Adaptive cruise
control*
(p. 214)
Adaptive cruise
control*, time
interval
(p. 201),
(p. 204)
Adaptive cruise
control*, Distance
Warning* (Dis-
tance Alert)
(p. 206),
(p. 216)
Radar sensor* (p. 214),
(p. 218),
(p. 234)
Symbol Specification See
Windscreen sen-
sor*, Camera sen-
sor*, Laser sen-
sor*
(p. 90),
(p. 225),
(p. 234),
(p. 238),
(p. 242)
Auto Brake*, Dis-
tance Warning*
(Distance Alert),
City Safety
TM
,
Collision warning
system*
(p. 218),
(p. 225),
(p. 234)
ABL system* (p. 92)
Driver Alert Sys-
tem*, Time for a
break
(p. 237)
Driver Alert Sys-
tem*, Time for a
break
(p. 238)
Parking brake (p. 292)
Rain sensor* (p. 101)
Active high beam,
AHB (Active High
Beam)*
(p. 90)
||
03 Instruments and controls
03
76
* Option/accessory, for more information, see Introduction.
Symbol Specification See
Start/Stop* (p. 286)
Start/Stop* (p. 286)
Driver Alert Sys-
tem*, Lane Depar-
ture Warning
(LDW)
(p. 238),
(p. 242)
Driver Alert Sys-
tem*, Lane Depar-
ture Warning*
(p. 240)
Driver Alert Sys-
tem*, Lane Depar-
ture Warning*
(p. 242)
Recorded speed
information*
(p. 196)
Engine block and
passenger com-
partment heater*
(p. 146)
Symbol Specification See
Engine block
heater and pas-
senger compart-
ment heater*
Service required
(p. 146)
Activated timer* (p. 146)
Activated timer* (p. 146)
Low battery (p. 146)
Fuel filler flap,
right-hand side
(p. 299)
Gear shift indica-
tor
(p. 269)
Gear positions (p. 270)
Measuring the oil
level
(p. 356)
Information symbols in the roof console
display
Symbol Specification See
Seatbelt reminder (p. 27)
Airbag, passenger
seat, activated
(p. 32)
Airbag, passenger
seat, deactivated
(p. 32)
Related information
Combined instrument panel - meaning of
indicator symbols (p. 68)
Combined instrument cluster - meaning
of warning symbols (p. 70)
Messages - handling (p. 113)
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
77
Volvo Sensus
Volvo Sensus is the heart of your personal
Volvo experience. It is Sensus that provides
information, entertainment and functions to
simplify your ownership.
When you are sitting in your car you want
control, and in today's interconnected world,
this includes information, communication and
entertainment when it is most suitable for
you. Sensus covers all our solutions that ena-
ble connection* to the outside world, at the
same time providing you with intuitive control
over all the car's capabilities.
Volvo Sensus combines and presents many
functions in several of the car's systems on
the centre console's display screen. With
Volvo Sensus the car can be personalised by
means of an intuitive user interface. Settings
can be made in Car settings, Audio and
media, Climate control, etc.
With the centre console buttons and controls
or the steering wheel's right-hand keypad*
functions can be activated or deactivated and
many different settings can be made.
With a press on MY CAR all settings related
to the driving and control of the car are pre-
sented, such as City Safety, locks and alarm,
automatic fan speed, setting the clock, etc.
With a press on the respective function
RADIO, MEDIA, TEL,
*, NAV* and CAM*
other sources, systems and functions can be
activated, e.g. AM, FM, CD, DVD*, TV*,
Bluetooth
®
*, navigation* and park assist cam-
era*.
For more information about all functions/
systems, see the relevant section in the
owner's manual or its supplement.
Overview
Control panel in centre console. The figure is
schematic - the number of functions and layout
of the buttons both vary, depending on the
equipment selected and the market.
Navigation* - NAV, see separate supple-
ment (Sensus Navigation).
Audio and media - RADIO, MEDIA, TEL*,
see separate supplement (Sensus Info-
tainment).
Function settings - MY CAR, see MY
CAR (p. 113).
Internet-connected car - *, see sepa-
rate supplement (Sensus Infotainment).
Climate control system (p. 127).
Park assist camera* (p. 247) – CAM*.
03 Instruments and controls
03
78
* Option/accessory, for more information, see Introduction.
Key positions
The remote control key can be used to set the
vehicle's electrical system in different modes/
levels so that different functions are available;
see Key positions - functions at different lev-
els (p. 78).
Ignition switch with remote control key extrac-
ted/inserted.
NOTE
For cars with the Keyless* function the
remote control key does not need to be
inserted into the ignition switch but can be
stored in e.g. a pocket. For more informa-
tion on Keyless functions, see Keyless
drive* (p. 175).
Insert the remote control key
1. Hold the end of the remote control key
with the detachable key blade and insert
the remote control key in the ignition
switch.
2. Then press the remote control key in the
lock up to its end position.
IMPORTANT
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key
incorrectly turned - hold the end with the
detachable key blade, see Detachable key
blade - detaching/attaching (p. 171).
Remove the remote control key
Push the remote control key, allow it to eject,
then pull it out from the ignition switch.
Key positions - functions at different
levels
To enable the use of a limited number of
functions with the engine switched off, the
car's electrical system can be set in 3 differ-
ent levels - 0, I and II - with the remote con-
trol key. This owner's manual describes these
levels throughout using the denomination
"key positions".
The following table shows the functions avail-
able in each key position/level.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
79
Level Functions
0
Odometer, clock and tem-
perature gauge are illumi-
nated.
Electrically operated seats
can be adjusted.
The audio system can be
used for a limited time - see
the Sensus Infotainment sup-
plement.
I
Sunroof, power windows, 12
V socket in the passenger
compartment, navigation,
phone, ventilation fan and
windscreen wipers can be
used.
Level Functions
II
The headlamps come on.
Warning/indicator lamps illu-
minate for 5 seconds.
Several other systems are
activated. However, electric
heating in seat cushions and
the rear window can only be
activated after starting the
engine.
This key position consumes a
lot of current from the starter
battery and should therefore be
avoided!
Selecting key position/level
Key position 0 - Unlock the car - This
means that the car's electrical system is
at level 0.
NOTE
To reach level I or II without starting the
engine - do not depress the brake/clutch
pedal when these key positions are due to
be selected.
Key position I - With the remote control
key fully inserted into the ignition switch
14
- Briefly press START/STOP ENGINE.
Key position II - With the remote control
key fully inserted into the ignition switch
14
- Give a long
15
press on START/STOP
ENGINE.
Back to key position 0 - To return to key
position 0 from position II and I - Briefly
press on START/STOP ENGINE.
Audio system
For information on audio system functions
with remote control key removed, see the
Sensus Infotainment supplement.
Starting and stopping the engine
For information about starting/stopping the
engine, see Starting the engine (p. 261).
Towing
For important information about the remote
control key during towing, see Towing
(p. 312).
Related information
Key positions (p. 78)
14
Not required for cars with the Keyless* function.
15
Approx. 2 seconds.
03 Instruments and controls
03
80
* Option/accessory, for more information, see Introduction.
Seats, front
The car's front seats have different setting
options for optimum seating comfort.
Raise/lower the seat, pump up/down.
Forward/backward: lift the handle to
adjust the distance to the steering wheel
and pedals. Check that the seat is locked
after changing position.
Raise/lower* front edge of seat cushion,
pump up/down.
Adjust backrest rake, turn the wheel.
Change the lumbar support*, press the
button.
Control panel for power seat*, see Seats,
front - electrically operated* (p. 81).
WARNING
Adjust the position of the driver's seat
before setting off, never while driving.
Make sure that the seat is in locked posi-
tion in order to avoid personal injury in the
event of sudden braking or an accident.
Lowering the passenger seat backrest*
The passenger seat's backrest can be folded
forward to make room for long loads.
Move the seat as far back/down as possi-
ble.
Adjust the backrest to an upright position.
Lift the catches on the rear of the back-
rest and fold it forward.
4. Push the seat forward so that the head
restraint "locks" in under the glovebox.
Raising takes place in reverse order.
WARNING
Grasp the backrest and make sure that it
is properly locked after being folded up in
order to avoid personal injury in the event
of sudden braking or an accident.
Related information
Seats, front - electrically operated*
(p. 81)
Seats, rear (p. 82)
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
81
Seats, front - electrically operated*
The car's front seats have different setting
options for optimum seating comfort. The
power seat can be moved forward/backward
and up/down. The front edge of the seat
cushion can be raised/lowered. The backrest
angle and lumbar support* can be changed.
Power seat
Front edge of seat cushion up/down
Raise/lower seat
Seat, forward/backward
Backrest rake
Lumbar support* is adjusted inward and
outward
The power seats have overload protection
which is tripped if a seat is blocked by an
object. If this should happen, set the car's
electrical system in key position I or 0 and
wait a short time before adjusting the seat
again.
Only one movement (forward/back/up/down/
inward/outward) can be made at a time.
Preparations
The seat can be adjusted for a certain time
after unlocking the door with the remote con-
trol key without the key in the ignition switch.
Seat adjustment is normally made in key
position I and can always be made when the
engine is running.
Seat with memory function*
The memory function stores settings for the
seat and the door mirrors.
Store setting
Memory button
Memory button
Memory button
Button for storing settings
1. Adjust the seat and the door mirrors.
2. Press and hold button M while pressing
button 1, 2 or 3 simultaneously. Hold the
buttons depressed until the acoustic sig-
nal is heard and text is shown in the com-
bined instrument panel.
The seat must be adjusted again before a
new memory can be set.
The setting for lumbar support is not stored.
Using a stored setting
Press one of the memory buttons 1-3 until the
seat and the door mirrors stop. If the button
is released, the movement of the seat and
door mirrors will be interrupted.
Key memory* in remote control key
All remote control keys can be used by differ-
ent drivers to store the settings for the driv-
er's seat and door mirrors
16
, see Remote
control key - personalisation* (p. 165).
16
Only if the car is equipped with power seat with memory and retractable power rearview and door mirrors. The setting for lumbar support is not stored.
||
03 Instruments and controls
03
82
* Option/accessory, for more information, see Introduction.
Emergency stop
If the seat accidentally begins to move, press
one of the setting buttons for the seat or
memory buttons in order to stop the seat.
Restarting to reach the seat position stored in
the key memory is performed by pressing the
unlock button on the remote control key. The
driver's door must then be open.
WARNING
Risk of crushing! Make sure that children
do not play with the controls. Check that
there are no objects in front of, behind or
under the seat during adjustment. Ensure
that none of the rear seat passengers is in
danger of becoming trapped.
Heated/ventilated seats*
For heated seats/ventilated, see Heated front
seats* (p. 134) and Heated rear seat*
(p. 134).
Related information
Seats, front (p. 80)
Seats, rear (p. 82)
Seats, rear
The rear seat backrest and the outer seat
head restraints can be folded. The centre seat
head restraint can be adjusted to suit the
height of the passenger.
Head restraint, centre seat, rear
Adjust the head restraint according to pas-
senger height so that the whole of the back of
the head is covered if possible. Slide it up as
required.
To lower the head restraint again, the button
(located in the centre between the backrest
and head restraint, see illustration) must be
pressed in while the head restraint is pressed
down carefully.
Manual lowering of the outer head
restraints, rear seat
Pull the locking handle closest to the head
restraint to fold the head restraint forward.
The head restraint is moved back manually
until a "click" can be heard.
WARNING
The head restraints must be in locked
position after being raised.
Lowering the rear seat backrest
IMPORTANT
There must be no objects on the rear seat
when the backrest is to be folded down.
The seat belts must not be connected
either. Otherwise there is a risk of damag-
ing the rear seat upholstery.
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
83
The triple-section backrest can be folded in
different ways.
NOTE
The front seats may need to be pushed
forwards, and/or the backrests adjusted
upwards, in order that the rear backrests
can be fully folded forward.
The left-hand section can be folded sepa-
rately.
The centre section can be folded sepa-
rately.
The right-hand section can only be folded
together with the centre section.
If the entire backrest is to be folded then
the different sections should be folded
separately.
If the centre backrest is being lowered -
release and adjust the head restraint for
the centre backrest, see the earlier sec-
tion "Head restraint, centre seat, rear".
The outer head restraints are lowered
automatically when the outer backrests
are lowered. Pull up the backrest's lock-
ing handle
while folding the backrest
forward at the same time. A red indicator
on the lock catch
shows that the
backrest is no longer locked in place.
Raising takes place in reverse order.
NOTE
When the backrest has been raised, the
red indicator should no longer be showing.
If it is still showing then the backrest is not
locked in place.
WARNING
Check that the backrests and head
restraints in the rear seat are locked prop-
erly after being folded up.
Electrical lowering of the rear seat's
outer head restraints*
1. The remote control key must be in key
position II.
2. Press the button to lower the rear outer
head restraints to improve rearward visi-
bility.
WARNING
Do not lower the outer head restraints if
there are any passengers using of the
outer seats.
||
03 Instruments and controls
03
84
* Option/accessory, for more information, see Introduction.
Move the head restraint back manually until a
click is heard.
WARNING
The head restraints must be in locked
position after being raised.
Related information
Seats, front (p. 80)
Seats, front - electrically operated* (p. 81)
Steering wheel
The steering wheel can be adjusted in differ-
ent positions and has controls for horn and
cruise control, as well as menu, audio and
phone control.
Adjusting
Adjusting the steering wheel.
Lever - releasing the steering wheel
Possible steering wheel positions
The steering wheel can be adjusted for both
height and depth:
1. Pull the lever towards you to release the
steering wheel.
2. Adjust the steering wheel to the position
that suits you.
3. Push back the lever to fix the steering
wheel in place. If the lever is stiff, press
the steering wheel lightly at the same time
as you push the lever back.
WARNING
Adjust the steering wheel and fix it before
driving away.
With speed related power steering* the level
of steering force can be adjusted, see Adjust-
able steering force* (p. 254).
Keypads* and paddles*
Keypads and paddles in the steering wheel.
Cruise control* (p. 199)
Adaptive cruise control - ACC* (p. 201)
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
85
Paddle for manual gear changing in an
automatic gearbox, see Automatic gear-
box -- Geartronic* (p. 270)
Audio and phone control, see supple-
ment, Sensus Infotainment
Horn
Horn.
Press the centre of the steering wheel to sig-
nal.
Related information
Heating* of the steering wheel (p. 85)
Heating* of the steering wheel
The steering wheel can be heated with elec-
tric heating.
Function
Button position may vary depending on equip-
ment selected and market.
Repeatedly press the button to switch
between the following functions:
Function Indicator
Switched off Button lamp extinguished
Heating Button lamp illuminated
Automatic steering wheel heating
With activated automatic start of steering
wheel heating, the heating of the steering
wheel starts when the engine is started. Auto-
matic start takes place when the car is cold
and the ambient temperature is below
approx. 10 °C. Activate/deactivate the func-
tion in the menu system MY CAR (p. 113).
03 Instruments and controls
03
86
* Option/accessory, for more information, see Introduction.
Light switches
The headlamp control activates and adjusts
the external lighting. It is also used to adjust
display and instrument lighting and mood
lighting (p. 95).
Overview, light switches
Overview, light switches.
Thumbwheel for adjusting display and
instrument lighting as well as ambient
lighting*
Button for rear fog lamp
Knob for daytime running lights and park-
ing lamps
Thumbwheel
17
for headlamp levelling
Knob positions
Posi-
tion
Specification
Daytime running lights
A
when
the car's electrical system is in
key position II or the engine is
running.
Main beam flash can be used.
Daytime running lights, side
marker lamps rear and position/
parking lamps when the car's
electrical system is in key posi-
tion II or the engine is running.
Side marker lamps rear and
position/parking lamps when
the car is parked.
Main beam flash can be used.
Posi-
tion
Specification
Daytime running lights, side
marker lamps rear and position/
parking lamps in daylight when
the car's electrical system is in
key position II or the engine is
running.
Dipped beam, side marker
lamps rear and position/parking
lamps in weak daylight or dark-
ness, or when the rear fog lamp
or windscreen wipers with con-
tinuous wiping are activated.
The tunnel detection (p. 88)*
function is activated.
The Active main beam (p. 90)*
function can be used.
Main beam can be activated
when dipped beam is switched
on.
Main beam flash can be used.
Dipped beam, side marker
lamps rear and position/parking
lamps.
Main beam can be activated.
17
Not available for cars equipped with active Xenon headlamps*.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
87
Posi-
tion
Specification
Main beam flash can be used.
A
Fitted in or under the front bumper.
Volvo recommends that
mode is used
when the car is being driven, as long as traffic
situations or weather conditions are unfavour-
able for the Active main beam* function.
Instrument lighting
Different display and instrument lighting is
switched on depending on key position; see
Key positions - functions at different levels
(p. 78).
The display lighting is automatically subdued
in darkness - the sensitivity is set with the
thumbwheel.
The intensity of the instrument lighting is
adjusted with the thumbwheel.
Headlamp levelling
The load in the car changes the vertical align-
ment of the headlamp beam, which could
dazzle oncoming motorists. Avoid this by
adjusting the height of the beam. Lower the
beam if the car is heavily laden.
1. Leave the engine running, or have the
car's electrical system in key position I.
2. Roll the thumbwheel up/down to raise/
lower beam alignment.
Thumbwheel positions for different load cases.
Only driver
Driver and passenger in the front passen-
ger seat
Occupants in all seats
Occupants in all seats and maximum load
in the cargo area
The driver and maximum load in the
cargo area
Cars with active Xenon headlamps* have
automatic headlamp levelling and are there-
fore not equipped with the thumbwheel.
Related information
Position/parking lamps (p. 87)
Daytime running lights (p. 88)
Main/dipped beam (p. 89)
Position/parking lamps
Position/parking lamps are switched on with
the headlamp control's knob.
Knob for headlamp control in the position for
position/parking lamps.
Turn the knob to the position for
(num-
ber plate lighting is switched on at the same
time).
If the car's electrical system is in key position
II or the engine is running then the daytime
running lights also switch on.
When it is dark outside and the tailgate is
opened the rear position/parking lamps illumi-
nate to alert traffic behind. This takes place
irrespective of what position the knob is in or
what key position the car's electrical system
is in.
Related information
Light switches (p. 86)
03 Instruments and controls
03
88
* Option/accessory, for more information, see Introduction.
Daytime running lights
With the knob for headlamp control in
position, and the car's electrical system in key
position II or the engine running, the daytime
running lights are activated automatically in
daylight.
Daytime running lights during the day.
DRL
Knob for headlamp control in AUTO position.
With the knob for headlamp control in
position the daytime running lights (Daytime
Running Lights - DRL) are activated automati-
cally when the car is driven in daylight. A light
sensor on the top of the instrument panel
changes from daytime running lights to
dipped beam at twilight or when daylight
becomes too weak. Switching to dipped
beam also takes place when the windscreen
wipers or rear fog lamps are activated.
WARNING
This system help to save energy - it cannot
determine in all situations when daylight is
too weak or sufficiently strong, e.g. in mist
and rain.
The driver is always responsible for ensur-
ing that the car is driven with the correct
beam pattern for the traffic situation and in
accordance with applicable traffic regula-
tions.
Tunnel detection*
Tunnel detection changes the lighting from
daytime running lights to dipped beam when
the car is driven into a tunnel. Approx. 20 sec-
onds after the car has left the tunnel, the light-
ing returns to daytime running lights.
The tunnel detection function is available in
cars with rain sensor*. The sensor detects the
entrance to a tunnel and resets the lighting
from daytime running lights to dipped beam.
Approx. 20 seconds after the car has left the
tunnel, the lighting returns to daytime running
lights. If the car is driven into another tunnel
within this time period then dipped beam is
kept switched on. This avoids repeated
changes to the car's lighting.
Note that the headlamp control's knob must
remain in
position for tunnel detection
to work.
Related information
Main/dipped beam (p. 89)
Light switches (p. 86)
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
89
Main/dipped beam
With the knob for headlamp control in posi-
tion
and the car's electrical system in
key position II or the engine running, the
dipped beam is activated automatically in
poor light conditions.
With the knob for headlamp control in posi-
tion
dipped beam is always switched on
when the engine is running or when key posi-
tion II is active.
Stalk switch and knob for headlamp control.
Position for main beam flash
Position for main beam
Dipped beam
With the knob in position, dipped beam
is activated automatically at twilight or when
daylight becomes too weak. Dipped beam is
also activated automatically if the windscreen
wipers or rear fog lamps are activated.
With the knob in position
dipped beam
is always switched on when the engine is run-
ning or when key position II is active.
Main beam flash
Move the stalk switch gently towards the
steering wheel to the position for main beam
flash. Main beam comes on until the stalk
switch is released.
Main beam
Main beam can be activated when the knob
is in position
18
or
. Activate/deac-
tivate main beam by moving the stalk switch
towards the steering wheel to the end posi-
tion and then releasing.
When main beam has been activated the
symbol illuminates in the combined
instrument panel.
Auxiliary lamps*
If the car has auxiliary lamps, the driver can
use the MY CAR menu system to choose
whether they should be deactivated or
switched on/off simultaneously with the main
beam
19
, see MY CAR (p. 113).
Related information
Active Xenon headlamps* (p. 92)
Active main beam* (p. 90)
Light switches (p. 86)
Headlamps - adjusting headlamp pattern
(p. 97)
Tunnel detection* (p. 88)
18
When dipped beam is switched on.
19
Auxiliary lamps must be connected to the electrical system by a workshop. Volvo recommends that you contact an authorised Volvo workshop.
03 Instruments and controls
03
90
* Option/accessory, for more information, see Introduction.
Active main beam*
Active main beam function detects the head-
lamp beams from oncoming traffic or the rear
lights of vehicles in front, and switches the
lighting from main beam to dipped beam. The
lighting returns to main beam when the
incoming light has stopped.
Active main beam - AHB
Active main beam (Active High Beam - AHB)
is a function which uses a camera sensor at
the top edge of the windscreen to detect the
headlamp beams from oncoming traffic or the
rear lights of vehicles in front, and then
switches from main beam to dipped beam.
The function can also take streetlights into
account.
The lighting returns to main beam about a
second after the camera sensor no longer
detects the headlamp beams from oncoming
traffic or the rear lights from vehicles in front.
Activating/deactivating
AHB can be activated when the headlamp
control's knob is in position
(provided
that the function has not been deactivated in
the menu system MY CAR, see MY CAR
(p. 113)).
Stalk switch and knob for headlamp control in
AUTO position.
The function can start while driving in the
dark when the car's speed is 20 km/h or
higher.
Activate/deactivate AHB by moving the left-
hand stalk switch towards the steering wheel
to the end position and then releasing. Deac-
tivation when main beam is on means that the
lights are reset directly to dipped beam.
Car with analogue combined instrument
panel
When AHB is activated the
symbol illu-
minates in the instrument's information dis-
play.
When main beam is switched on the
symbol also illuminates in the combined
instrument panel.
Car with digital combined instrument panel
When AHB is activated the
symbol
turns white in the instrument's information
display.
When main beam is activated, the symbol
turns blue.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
91
Manual operation
NOTE
Keep the windscreen surface in front of the
camera sensor free from ice, snow, mist
and dirt.
Do not stick or attach anything to the
windscreen in front of the camera sensor
as this may reduce effectiveness or cause
one or more of the systems dependent on
the camera to stop working.
If the message Active main beam
Temporary unavailable Switch manually is
shown in the combined instrument panel's
information display then you have to switch
manually between main and dipped beam.
However, the knob for headlamp control can
still remain in position
. The same
applies if the message
Windscreen sensors
blocked See manual
and the symbol
are shown. The
symbol goes out when
these messages are shown.
AHB may be temporarily unavailable e.g. in
situations with dense fog or heavy rain. When
AHB becomes available again, or the wind-
screen sensors are no longer blocked, the
message extinguishes and the
symbol
illuminates.
WARNING
AHB is an aid for using the optimum beam
pattern when conditions are favourable.
The driver always bears responsibility for
manually switching between main and
dipped beam when traffic situations or
weather conditions so require.
IMPORTANT
Examples of when manual switching
between main and dipped beam may be
required:
In heavy rain or dense fog
In freezing rain
In snow flurries or slush
In moonlight
When driving in poorly lit built-up
areas
When the traffic ahead has weak light-
ing
If there are pedestrians on or beside
the road
If there are highly reflective objects
such as signs in the vicinity of the road
When the lighting from oncoming traf-
fic is obscured by e.g. a crash barrier
When there is traffic on connecting
roads
On the brow of a hill or in a hollow
In sharp bends.
For more information on the limitations of the
camera sensor, see Collision warning system*
- camera sensor limitations (p. 232).
Related information
Main/dipped beam (p. 89)
Light switches (p. 86)
03 Instruments and controls
03
92
* Option/accessory, for more information, see Introduction.
Active Xenon headlamps*
Active Xenon headlamps are designed to pro-
vide maximum illumination in bends and junc-
tions and so provide increased safety.
Active Xenon headlamps ABL
Headlamp pattern with function deactivated (left)
and activated (right) respectively.
If the car is equipped with active Xenon head-
lamps (Active Bending Lights – ABL) the light
from the headlamps follows the steering
wheel movement in order to provide maxi-
mum lighting in bends and junctions and so
provide increased safety.
The function is activated automatically when
the car is started (provided that it has not
been deactivated in the menu system
MY CAR, see MY CAR (p. 113)). In the event
of a fault in the function the
symbol illu-
minates in the combined instrument panel at
the same time as the information display
shows an explanatory text and a further illu-
minated symbol.
Symbol Message Specification
Headlamp
system
malfunc-
tion Serv-
ice
required
The system is
disengaged. Visit
a workshop if
the message
remains. Volvo
recommends
that you contact
an authorised
Volvo workshop.
The function is only active in twilight or dark-
ness and only when the car is moving.
The function
20
can be deactivated/activated
in the menu system MY CAR, see MY CAR
(p. 113).
For headlamp pattern adjustment, see Head-
lamps - adjusting headlamp pattern (p. 97).
Related information
Main/dipped beam (p. 89)
Active main beam* (p. 90)
Light switches (p. 86)
Rear fog lamp
When visibility is reduced by fog the rear fog
lamp can be used so that other road users
shall notice vehicles in front at an early stage.
Button for rear fog lamp.
The rear fog lamp can only be switched on
when key position II is active or the engine is
running and the headlamp control's knob is in
position
or .
Press the button for On/Off. The rear fog
lamp's indicator symbol in the com-
bined instrument panel and the light in the
button both illuminate when the rear fog lamp
is switched on.
The rear fog lamp is switched off automati-
cally when the engine is switched off or when
20
Activated on delivery from the factory.
03 Instruments and controls
03
}}
93
the headlamp control's knob is turned to
position
or .
NOTE
Regulations on the use of rear fog lamps
vary from country to country.
Related information
Light switches (p. 86)
Brake lights
The brake light automatically comes on during
braking.
The brake light is switched on when the brake
pedal is depressed. In addition, it is switched
on when one of driving support systems
Adaptive cruise control (p. 201), City Safety
(p. 219) or Collision warning system (p. 226)
brakes the car.
Related information
Foot brake - emergency brake lights and
automatic hazard warning flashers
(p. 291)
Hazard warning flashers
The hazard warning flashers warn other road
users by means of all of the car's direction
indicator lamps flashing simultaneously when
this function is activated.
When the hazard warning flashers are acti-
vated both direction indicator symbols flash in
the combined instrument panel.
Button for hazard warning flashers.
Press the button to activate the hazard warn-
ing flashers. Both direction indicator symbols
in the combined instrument panel flash when
the hazard warning flashers are used.
The hazard warning flashers are activated
automatically when the car has been braked
so suddenly that the emergency brake lights
have been activated at a speed below
10 km/h. The hazard warning flashers remain
on when the car has stopped and are deacti-
||
03 Instruments and controls
03
94
vated automatically when the car is driven off
again or the button is depressed.
Related information
direction indicators (p. 94)
Foot brake - emergency brake lights and
automatic hazard warning flashers
(p. 291)
direction indicators
The car's direction indicators are operated
with the left-hand stalk switch. The direction
indicator lamps flash three times or continu-
ously, depending on how far up or down the
stalk switch is moved.
Direction indicators.
Short flash sequence
Move the stalk switch up or down to the
first position and release. The direction
indicator lamps flash three times. The
function can be activated/deactivated in
the menu system MY CAR, see MY
CAR (p. 113).
Continuous flash sequence
Move the stalk switch up or down to the
outer position.
The stalk switch remains in its position and is
moved back manually, or automatically by the
steering wheel movement.
Direction indicator symbols
For direction indicator symbols, see Com-
bined instrument panel - meaning of indicator
symbols (p. 68).
Related information
Hazard warning flashers (p. 93)
03 Instruments and controls
03
}}
95
Interior lighting
The passenger compartment lighting is acti-
vated/deactivated with the buttons in the con-
trols above the front seats and the rear seat.
G021149
Controls in roof console for the front reading
lamps and passenger compartment lighting.
Reading lamp, left-hand side
Reading lamp, right-hand side
Interior lighting
All lighting in the passenger compartment can
be switched on and off manually within
30 minutes from when:
the engine has been switched off and the
car's electrical system is in key position 0
the car has been unlocked but the engine
has not been started.
Front roof lighting
The front reading lamps are switched on or
off by pressing the relevant button in the roof
console.
Rear roof lighting
G021150
Rear roof lighting.
The lamps are switched on or off by pressing
each respective button.
Courtesy lighting
Courtesy lighting (and passenger compart-
ment lighting) is switched on and off respec-
tively when a side door is opened or closed.
Glovebox lighting
Glovebox lighting is switched on and off
respectively when the lid is opened or closed.
Vanity mirror lighting
The lighting for the vanity mirror (p. 154) is
switched on and off respectively when the
cover is opened or closed.
Lighting in the cargo area
The lighting in the cargo area is switched on
and off respectively when the tailgate is
opened or closed.
Automatic lighting
The switch for passenger compartment light-
ing has three positions for the lighting in the
passenger compartment:
Off – right-hand side pressed in, auto-
matic lighting deactivated.
Neutral position – automatic lighting
activated.
On – left-hand side pressed in, passenger
compartment lighting switched on.
Neutral position
When the button is in neutral position the
passenger compartment lighting is switched
on and off automatically in accordance with
the following.
The passenger compartment lighting is
switched on and remains on for 30 seconds
if:
the car is unlocked with the remote con-
trol key or key blade, see Remote control
key - functions (p. 167) or Detachable
key blade - unlocking doors (p. 172)
the engine has been switched off and the
car's electrical system is in key position
0.
||
03 Instruments and controls
03
96
* Option/accessory, for more information, see Introduction.
Passenger compartment lighting is switched
off when:
the engine is started
the car is locked.
The passenger compartment lighting comes
on and remains on for two minutes if one of
the doors is open.
If any lighting is switched on manually and
the car is locked then it will be switched off
automatically after two minutes.
Mood lights*
When the normal passenger compartment
lighting is switched off and the engine is run-
ning, a number of LEDs illuminate, including
one in the ceiling lighting, in order to provide
a low-light and enhance the mood while driv-
ing. The light also makes it easier to see
objects in storage compartments etc. during
the darker hours of the day. This lighting goes
out for a little while after the normal passen-
ger compartment lighting when the car is
locked. The brightness is controlled using the
thumbwheel on the headlamp control (p. 86).
Home safe light duration
Home safe lighting consists of dipped beam,
parking lamps, lamps in the door mirrors,
number plate lighting, interior roof lighting as
well as courtesy lighting.
Some of the exterior lighting can be kept
switched on to work as home safe lighting
after the car has been locked.
1. Remove the remote control key from the
ignition switch.
2. Move the left-hand stalk switch toward
the steering wheel to the end position and
release it. The function can be activated
in the same way as with main beam flash;
see Main/dipped beam (p. 89).
3. Get out of the car and lock the door.
When the function is activated, dipped beam,
parking lamps, door mirror lamps, number
plate lighting, interior roof lamps and courtesy
lighting are switched on.
The length of time for which the home safe
lighting should be kept on can be set in the
menu system MY CAR, see MY CAR (p. 113).
Related information
Approach lighting (p. 96)
Approach lighting
Approach lighting consists of parking lamps,
lamps in the door mirrors, number plate light-
ing, interior roof lighting as well as courtesy
lighting.
Approach lighting is switched on with the
remote control key, see Remote control key -
functions (p. 167), and is used to switch on
the car's lighting at a distance.
When the function is activated with the
remote control, the parking lamps, door mir-
ror lamps, number plate lighting, interior roof
lamps and courtesy lighting are switched on.
The length of time for which the approach
lighting should be kept on can be set in the
menu system MY CAR, see MY CAR (p. 113).
Related information
Home safe light duration (p. 96)
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
97
Headlamps - adjusting headlamp
pattern
The headlamp pattern must be adjusted to
avoid dazzling oncoming motorists and can
be set for right or left-hand traffic.
G021151
Headlamp pattern, left-hand traffic.
G021152
Headlamp pattern, right-hand traffic.
Active Xenon headlamps*
G019442
Headlamp control for adjusting headlamp pat-
tern.
Normal position – the headlamp pattern is
correct for the country in which the car
was delivered.
Adapted position – designed for opposite
headlamp pattern.
WARNING
The headlamps must be handled with
extreme caution due to the Xenon lamp
being supplied by a high-voltage unit.
The country in which the car is delivered
determines whether normal position is
designed for right or left-hand traffic.
Example 1
If a car that is delivered in Sweden shall be
driven in the UK then the headlamps must be
set to the adjusted position, see preceding
illustration.
Example 2
A car that is delivered in the UK is designed
for left-hand traffic and is driven there with
the headlamps in normal position, see pre-
ceding illustration.
Halogen headlamps
The headlamp pattern for halogen headlamps
is readjusted by masking the headlamp lens.
The headlamp pattern may not be as good.
||
03 Instruments and controls
03
98
Masking the headlamps
1. Copy the A and B templates for left-hand
drive cars or the C and D templates for
right-hand drive cars, see later section
"Templates for halogen headlamps". The
templates have a scale of 1:2. Use a pho-
tocopier with a zoom function for exam-
ple, and copy the templates at 200 %:
A = LHD Right (left-hand drive, right
lens)
B = LHD Left (left-hand drive, left lens)
C = RHD Right (right-hand drive, right
lens)
D = RHD Left (right-hand drive, left
lens)
2. Transfer the template to a self-adhesive
waterproof material and cut it out.
3. Start from the design line on the head-
lamp lenses; see the dotted line in the fol-
lowing figure. Position the self-adhesive
templates at the right distance from each
design line using the illustration and the
dimensions in the following list:
A = LHD Right - approx. 86 mm
B = LHD Left - approx. 40 mm
C = RHD Right - 0 mm
D = RHD Left - approx. 96 mm
03 Instruments and controls
03
}}
99
Upper row: left-hand drive cars, templates A and B. Lower row: right-hand drive cars, templates C and D.
||
03 Instruments and controls
03
100
Templates for halogen headlamps
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
101
Wipers and washing
Wipers and washers clean the windscreen
and rear window. The headlamps are cleaned
with high-pressure washing.
Windscreen wipers
21
Windscreen wipers and windscreen washers.
Rain sensor, On/Off
Thumbwheel sensitivity/frequency
Windscreen wipers off
Move the stalk switch to position 0
to switch off the windscreen wipers.
Single sweep
Raise the stalk switch and release to
make one sweep.
Intermittent wiping
Set the number of sweeps per time
unit with the thumbwheel when
intermittent wiping is selected.
Continuous wiping
The wipers sweep at normal speed.
The wipers sweep at high speed.
IMPORTANT
Before activating the wipers during winter
ensure that the wiper blades are not frozen
in, and that any snow or ice on the wind-
screen is scraped away.
IMPORTANT
Use plenty of washer fluid when the wipers
are cleaning the windscreen. The wind-
screen must be wet when the windscreen
wipers are operating.
Service position wiper blade
For cleaning the windscreen/wiper blades
and replacement of wiper blades, see Wiper
blades (p. 369) and Car wash (p. 390).
Rain sensor*
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen. The sensitivity of
the rain sensor can be adjusted using the
thumbwheel.
When the rain sensor is activated a lamp in
the button is illuminated and the rain sensor
symbol
is shown in the combined
instrument panel.
Activating and setting the sensitivity
When activating the rain sensor, the car must
be running or the remote control key in posi-
tion I or II while the windscreen wiper stalk
switch must be in position 0 or in the position
for a single sweep.
Activate the rain sensor by pressing the but-
ton
. The windscreen wipers make one
sweep.
Press the stalk switch up for the wipers to
make an extra sweep.
Turn the thumbwheel upward for higher sen-
sitivity and downward for lower sensitivity.
(An extra sweep is made when the thumb-
wheel is turned upward.)
Deactivate
Deactivate the rain sensor by pressing the
button
or move the stalk switch down
to another wiper program.
21
For replacing the wiper blades and service position wiper blades, see Wiper blades (p. 369). For filling washer fluid, see Washer fluid - filling (p. 371).
||
03 Instruments and controls
03
102
* Option/accessory, for more information, see Introduction.
The rain sensor is automatically deactivated
when the remote control key is removed from
the ignition switch or five minutes after the
engine has been switched off.
IMPORTANT
The windscreen wipers could start and be
damaged in an automatic car wash.
Switch off the rain sensor while the car is
in motion or when the remote control key
is in position I or II. The symbol in the
combined instrument panel and the lamp
in the button go out.
Washing the headlamps and windows
Washing function.
Washing the windscreen
Move the stalk switch toward the steering
wheel to start the windscreen and headlamp
washers.
The windscreen wipers will make several
more sweeps and the headlamps are washed
once the stalk switch has been released.
Heated washer nozzles*
The washer nozzles are heated automatically
in cold weather to prevent the washer fluid
freezing solid.
High-pressure headlamp washing*
High-pressure headlamp washing consumes
a large quantity of washer fluid. To save fluid,
the headlamps are washed automatically at
every fifth windscreen wash cycle.
Reduced washing
If only approx. 1 litre of washer fluid remains
in the reservoir and the message that you
should fill the washer fluid is shown in the
combined instrument panel, then the supply
of washer fluid to the headlamps is switched
off. This is in order to prioritise cleaning the
windscreen and the visibility through it.
Wiping and washing the rear window
Rear window wiper – intermittent wiping
Rear window wiper – continuous speed
Press the stalk switch forward (see the arrow
in the illustration above) to initiate rear win-
dow washing and wiping.
NOTE
The rear window wiper is equipped with
overheating protection which means that
the motor is switched off if it overheats.
The rear window wiper works again after a
cooling period (30 seconds or longer,
depending on the heat in the motor and
the outside temperature).
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
103
Wiper – reversing
Engaging reverse gear while the windscreen
wipers are on initiates intermittent rear win-
dow wiping
22
. The function stops when
reverse gear is disengaged.
If the rear window wiper is already on at con-
tinuous speed, no change is made.
NOTE
On cars with rain sensors, the rear wiper is
activated during reversing if the sensor is
activated and it is raining.
Related information
Washer fluid - filling (p. 371)
Washer fluid - quality and volume
(p. 415)
Power windows
All power windows can be operated using the
control panel for the driver's door - the con-
trol panels for the other doors operate their
respective power window.
Driver's door control panel.
Switch for electric child safety locks* and
disengaging rear power window buttons;
see Child safety locks - electrical activa-
tion* (p. 186).
Rear window controls
Front window controls
WARNING
Check that no rear seat passengers are
trapped when the windows are closed
from the driver's door.
WARNING
Check that children or other passengers
are not trapped if the windows are closed,
even when the remote control key is used.
WARNING
If there are children in the car - remember
to always switch off the power supply to
the power windows by selecting key posi-
tion 0 and then take the remote control key
with you when leaving the car. For infor-
mation on key positions - see Key posi-
tions - functions at different levels (p. 78).
22
This function (intermittent wiping when reversing) can be deactivated. Visit a workshop. Volvo recommends that you contact an authorised Volvo workshop.
||
03 Instruments and controls
03
104
Operating
Operating the power windows.
Operating without auto
Operating with auto
All power windows can be operated using the
control panel for the driver's door - the con-
trol panels for the other doors can only each
operate their respective power window. Only
one control panel can be operated at a time.
In order for the power windows to be used,
the key position must be at least I - see Key
positions - functions at different levels (p. 78).
The power windows can be operated for a
few minutes after the engine has been
switched off and after the remote control key
has been removed - although not after a door
has been opened.
Closing of the windows is stopped and the
window is opened if anything prevents its
movement. It is possible to force the pinch
protection when closing has been interrupted,
e.g. with ice, by continuously holding the but-
ton up until the window is closed. The pinch
protection is reactivated after a brief pause.
NOTE
One way to reduce the pulsating wind
noise when the rear windows are open is
to also open the front windows slightly.
Operating without auto
Move one of the controls up/down gently.
The power windows move up/down as long
as the control is held in position.
Operating with auto
Move one of the controls up/down to the end
position and release it. The window runs
automatically to its end position.
Operating with the remote control key
and central locking
To remotely operate the power windows from
the outside with the remote control key or
from inside with central locking, see Remote
control key (p. 164) and Locking/unlocking -
from the inside (p. 180).
Resetting
If the battery is disconnected then the func-
tion for automatic opening must be reset so
that it can work correctly.
1. Gently raise the front section of the but-
ton to raise the window to its end position
and hold it there for one second.
2. Release the button briefly.
3. Raise the front section of the button again
for one second.
WARNING
A reset must take place for pinch protec-
tion to work.
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
105
Door mirrors
The door mirror positions are adjusted with
the joystick in the driver's door controls.
Door mirror controls.
Adjusting
1. Press the L button for the left-hand door
mirror or the R button for the right-hand
door mirror. The light in the button illumi-
nates.
2. Adjust the position with the joystick in the
centre.
3. Press the L or R button again. The light
should no longer be illuminated.
WARNING
Both mirrors are the wide-angle type to
provide optimal vision. Objects may
appear further away than they actually are.
Storing settings
23
The settings for the rearview and door mirrors
and the positions of the driver's seat can be
stored for each remote control key in the car
key memory*, see Remote control key - per-
sonalisation* (p. 165).
Angling the door mirror when parking
23
The door mirror can be angled down for the
driver to view the side of the road when park-
ing for example.
Engage reverse gear and press the L or R
button.
When reverse gear is disengaged the mirror
automatically returns to its original position
after approx. 10 seconds, or earlier by press-
ing the button labelled L or R respectively.
Automatic angling of the door mirror
when parking
23
When reverse gear is engaged the door mirror
is automatically angled down so that the
driver can see the side of the road when
parking for example. When reverse gear is
disengaged the mirror automatically returns
to its original position after a short time.
The function can be activated/deactivated in
the menu system MY CAR, see MY CAR
(p. 113).
Automatic retraction when locking
23
When the car is locked/unlocked with the
remote control key the door mirrors are auto-
matically retracted/extended.
The function can be activated/deactivated in
the menu system MY CAR, see MY CAR
(p. 113).
Resetting to neutral
Mirrors that have been moved out of position
by an external force must be reset electrically
to the neutral position for electric retracting/
extending to work correctly:
1. Retract the mirrors with the L and R but-
tons.
2. Fold them out again with the L and R but-
tons.
3. Repeat the above procedure as neces-
sary.
The mirrors are now reset in neutral position.
Retractable power door mirrors*
The mirrors can be retracted for parking/driv-
ing in narrow spaces:
1. Depress the L and R buttons simultane-
ously (key position must be at least I).
23
Only in combination with power seat with memory, see Seats, front - electrically operated* (p. 81).
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
107
Rearview mirror - interior
The interior rearview mirror can be dimmed
with a control in the mirror's lower edge.
Alternatively, the rearview mirror dims auto-
matically.
Control for dimming
Manual dimming
Bright light from behind could be reflected in
the rearview mirror and dazzle the driver. Use
dimming with the dimming control when
lights from behind are distracting:
1. Use dimming by moving the control in
towards the passenger compartment.
2. Return to normal position by moving the
control towards the windscreen.
Automatic dimming*
Bright light from behind is automatically
dimmed by the rearview mirror. The control
for manual dimming is not available on mir-
rors with automatic dimming.
The rearview mirror contains two sensors -
one forward facing and one rearward facing -
that work together to identify and eliminate
dazzling light. The forward facing sensor
detects ambient light, while the rearward fac-
ing sensor detects the light from vehicle
headlights behind.
NOTE
If the sensors are obscured by e.g. parking
permits, transponders, sun visors or
objects in the seats or in the cargo area in
such a way that light is prevented from
reaching the sensors, then the dimming
function of the rearview mirror is reduced.
Only rearview mirror with automatic dimming
can be equipped with compass (p. 107).
Related information
Door mirrors (p. 105)
Compass*
The rearview mirror contains an integrated
display that shows the compass direction in
which the front of the car is pointing.
Operation
Rearview mirror with compass.
The upper right-hand corner of the rearview
mirror has an integrated display that shows
the compass direction in which the front of
the car is pointing. Eight different directions
are shown with English abbreviations:
N
(north), NE (north east), E (east), SE (south
east), S (south), SW (south west), W (west)
and NW (north west).
The compass is activated automatically when
the car is started or when key position II is
active, see Key positions - functions at differ-
ent levels (p. 78). To deactivate/activate the
compass - press in the button on the under-
||
03 Instruments and controls
03
108
* Option/accessory, for more information, see Introduction.
side of the mirror using a paper clip for exam-
ple.
Calibration
The compass may need calibrating to show
the correct compass direction.
The earth is divided into 15 magnetic zones.
The compass should be calibrated if the car
is moved across several magnetic zones.
Proceed as follows to perform calibration:
1. Stop the car in a large open area free
from steel structures and high-voltage
power lines.
2. Start the car and switch off all electrical
equipment (air conditioning, wipers, etc.)
and ensure that all doors are closed.
NOTE
Calibration may fail or not start at all if
electrical equipment is not switched off.
3. Hold the button on the underside of the
rearview mirror depressed (use a paper
clip or similar) for approx. 3 seconds. The
number of the current magnetic zone is
shown.
G030295
Magnetic zones.
4. Press the button repeatedly until the
required magnetic zone (
1–15) is shown.
See the map of magnetic zones for the
compass.
5. Wait until the display returns to showing
the character
C, or hold the button on the
underside of the rearview mirror
depressed for approx. 6 seconds until the
character C is shown.
6. Drive slowly in a circle at a speed of no
more than 10 km/h until a compass direc-
tion is shown in the display, indicating
that calibration is complete. Then drive a
further 2 circles to fine-tune calibration.
7. Cars with heated windscreen*: If the
character
C is shown in the display when
the heated windscreen is activated, per-
form the calibration in accordance with
point 6 above with the heated windscreen
activated, see Demisting and defrosting
the windscreen (p. 137).
8. Repeat the above procedure as neces-
sary.
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
109
Sunroof*
The sunroof can be operated with a control in
the roof panel.
The sunroof's inner sunscreen is closed man-
ually.
The sunroof has a wind deflector.
The sunroof controls are located in the roof
panel. The sunroof can be opened vertically
at the rear edge and horizontally. Key position
I or II is required for the sunroof to be
opened.
Horizontal opening
G017823
Horizontal opening, backward/forward.
Opening, automatic
Opening, manual
Closing, manual
Closing, automatic
Opening
For maximum sunroof opening, move the
control back to the position for automatic
opening and release.
Open manually by pulling the control back-
wards to the point of resistance for manual
opening. The sunroof moves to maximum
open position as long as the button is kept
depressed.
Closing
Close manually by pushing the control for-
wards to the point of resistance for manual
closing. The sunroof moves to closed posi-
tion as long as the button is kept depressed.
WARNING
Risk of crushing when the sunroof is
closed. The sunroof's pinch-protection
function only operates during automatic
closing, not manual.
Close automatically by pressing the control to
the position for automatic closing and then
release it.
The power supply to the sunroof is switched
off by selecting key position 0 and removing
the remote control key from the ignition
switch.
WARNING
If there are children in the car:
Remember to always switch off the power
supply to the sunroof by selecting key
position 0 and then take the remote con-
trol key with you when leaving the car. For
information on key positions - see Key
positions - functions at different levels
(p. 78).
Vertical opening
G028900
Vertical opening, raised at the rear edge.
Open by pressing the rear edge of the
control upward.
Close by pulling the rear edge of the con-
trol down.
||
03 Instruments and controls
03
110
Closing using the remote control key or
central locking button
G021345
One long press on the lock button closes the
sunroof and all the windows, see Remote
control key - functions (p. 167) and Locking/
unlocking - from the inside (p. 180). The
doors and the tailgate are locked. To interrupt
closing, press the lock button again.
WARNING
If the sunroof is closed with the remote
control key, check that no one risks being
trapped.
Sunscreen
The sunroof features a manual, sliding interior
sunscreen. The sunscreen slides back auto-
matically when the sunroof is opened. Grip
the handle and slide the screen forward to
close it.
Pinch protection
The sunroof's pinch protection function is
triggered if it is blocked by an object during
automatic closing. If blocked, the sunroof will
stop and automatically open to the previous
position.
Wind deflector
The sunroof has a wind deflector that is
folded up when the sunroof is in the open
position.
Menu navigation - combined
instrument panel
The left-hand stalk controls the menus
(p. 111) shown on the information display in
the combined instrument panel (p. 63). Which
menus are shown depends on the key posi-
tion (p. 78).
Display (analogue combined instrument panel)
and controls for menu navigation.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
111
Display (digital combined instrument panel) and
controls for menu navigation.
OK – access to message list and mes-
sage confirmation.
Thumbwheel – browse between menu
options.
RESET – reset the active function. Used
in certain cases to select/activate a func-
tion, see the explanation under each
respective function.
If there is a message (p. 112) then it must be
acknowledged with OK in order that the
menus shall be shown.
Related information
Messages - handling (p. 113)
Menu overview - combined
instrument panel
Which menus are shown in the combined
instrument panel's information display
depends on the key position (p. 78).
Some of the following menu options require
the function and hardware to be installed in
the car.
Analogue combined instrument panel
Digital speed
Parking heater*
Additional heater*
TC options
Service status
Oil level
24
Messages (##)
25
Digital combined instrument panel
Settings*
Themes
Contrast mode/Colour mode
Service status
Messages
25
Oil level
24
Parking heater*
Trip computer reset
Related information
Analogue combined instrument panel -
overview (p. 63)
Digital combined instrument panel - over-
view (p. 64)
Menu navigation - combined instrument
panel (p. 110)
24
Certain engines.
25
The number of messages is indicated in brackets.
03 Instruments and controls
03
112
* Option/accessory, for more information, see Introduction.
Messages
When a warning, information or indicator
symbol illuminates, a corresponding message
appears on the information display.
Message Specification
Stop safely
A
Stop and switch off the
engine. Serious risk of
damage - consult a work-
shop
B
.
Stop engine
A
Stop and switch off the
engine. Serious risk of
damage - consult a work-
shop
B
.
Service
urgent
A
Contact a workshop
B
to
check the car immedi-
ately.
Service
required
A
Contact a workshop
B
to
check the car as soon as
possible.
See manual
A
Read the owner's man-
ual.
Book time
for mainte-
nance
Time to book regular
service - contact a work-
shop
B
.
Message Specification
Time for reg-
ular mainte-
nance
Time for regular service -
contact a workshop
B
. The
timing is determined by
the number of kilometres
driven, number of months
since the last service,
engine running time and
oil grade.
Maintenance
overdue
If the service intervals are
not followed then the
warranty does not cover
any damaged parts -
contact a workshop
B
.
Transmission
Oil change
needed
Contact a workshop
B
to
check the car as soon as
possible.
Transmission
Reduced
performance
The gearbox cannot han-
dle full capacity. Drive
carefully until the mes-
sage clears
C
.
If shown repeatedly -
contact a workshop
B
.
Transmission
hot Reduce
speed
Drive more smoothly or
stop the car in a safe
manner. Disengage the
gear and run the engine
at idling speed until the
message clears
C
.
Message Specification
Transmission
hot Stop
safely Wait
for cooling
Critical fault. Stop the car
immediately in a safe
manner and contact a
workshop
B
.
Temporarily
off
A
A function has been tem-
porarily switched off and
is reset automatically
while driving or after star-
ting again.
Low battery
charge
Power save
mode
The audio system is
switched off to save
energy. Charge the bat-
tery.
A
Part of message, shown together with information on
where the problem has arisen.
B
An authorised Volvo workshop is recommended.
C
For more information regarding the automatic gearbox, see
Automatic gearbox -- Geartronic* (p. 270).
Related information
Messages - handling (p. 113)
Menu navigation - combined instrument
panel (p. 110)
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
113
Messages - handling
Use the left-hand stalk switch to acknowledge
and browse among messages (p. 112) that
are shown in the information display of the
combined instrument panel.
When a warning, information or indicator
symbol illuminates, a corresponding message
appears in the display at the same time. An
error message is stored in a memory list until
the fault has been rectified.
Press OK on the left-hand stalk switch to
acknowledge a message. Scroll through mes-
sages with the thumbwheel (p. 110).
NOTE
If a warning message appears while you
are using the trip computer, the message
must be read (press OK) before the previ-
ous activity can be resumed.
Related information
Menu overview - combined instrument
panel (p. 111)
MY CAR
MY CAR is a menu source that handles many
of the car's functions, e.g. City Safety™, locks
and alarm, automatic fan speed, setting the
clock, etc.
Certain functions are standard, others are
optional - the range also varies depending on
the market.
Operation
Navigation in the menus is carried out using
buttons in the centre console or with the
steering wheel's right-hand keypad*.
Control panel in centre console and steering
wheel keypad. The figure is schematic - the num-
ber of functions and layout of the buttons both
||
03 Instruments and controls
03
114
vary, depending on the equipment selected and
the market.
MY CAR - opens the menu system MY
CAR.
OK/MENU - press the button in the cen-
tre console or the thumbwheel on the
steering wheel to select/tick in the high-
lighted menu option or store the selected
function in the memory.
TUNE - turn the knob in the centre con-
sole or the thumbwheel on the steering
wheel to scroll up/down through the
menu options.
EXIT
EXIT functions
Depending on the function the cursor is on
when EXIT is depressed briefly, and on which
menu level, one of the following may occur:
phone call is rejected
current function is interrupted
input characters are deleted
most recent selections are undone
leads up in the menu system.
A long press on EXIT leads to the normal
view for MY CAR or if you are in the normal
view, to the highest menu level (main source
menu).
Menu options and search paths
For a description of the menu options and
search paths in MY CAR, see the Sensus
Infotainment supplement.
Trip computer
The car's trip computer can record, calculate
and show information while driving.
Trip computer content and appearance varies
depending on whether the combined instru-
ment panel is analogue or digital:
Trip computer - analogue combined
instrument panel (p. 116)
Trip computer - digital combined instru-
ment panel (p. 120)
Checking and settings can be made immedi-
ately after the combined instrument panel is
automatically illuminated in connection with
unlocking. If none of the trip computer's con-
trols are actuated within approx. 30 seconds
after the driver's door has been opened then
the instrument extinguishes, after which
either key position II (p. 78) or engine starting
is required in order to operate the trip com-
puter.
NOTE
If a warning message appears when the
trip computer is used then the message
must first be acknowledged before the trip
computer can be reactivated.
Acknowledge the message by briefly
pressing the indicator stalk OK button.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
115
Group menus
The trip computer has two different group
menus:
Functions
Heading in combined instrument panel
The trip computer's functions or headings
are each listed in an infinite loop.
Related information
Trip computer - trip statistics* (p. 125)
Trip computer - supplementary informa-
tion (p. 124)
03 Instruments and controls
03
116
Trip computer - analogue combined
instrument panel
The trip computer's menu is in a variable
loop. One of the alternatives is that the trip
computer's display extinguishes - this also
marks the start/end of the loop.
Information display and controls.
OK - Opens the loop with the trip com-
puter's functions + Activates the selected
option.
Thumbwheel - Opens the loop with the
trip computer's headings + Scrolls
through the options.
RESET - Undoes, zeroes or backs out of
a function after making a selection.
Functions
Proceed as follows to open and check/adjust
functions:
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
two presses on RESET.
2. Press OK - the loop with all functions
opens.
3. Browse through the functions with the
thumbwheel and select/confirm with OK.
4. Finish by pressing twice on RESET after
completed checking/adjustment.
The different functions of the trip computer
are listed in the following table:
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
117
Functions Information
Digital speed
km/h
mph
No display
Shows the car's speed digitally in the centre of the combined instrument panel:
Open with OK, select with the thumbwheel, confirm with OK and back out with ENTER.
Parking heater*
DIRECT START
- Timer 1 - leads to the menu for select-
ing time.
- Timer 2 - leads to the menu for select-
ing time.
For a description of programming the timer, see Engine block heater and passenger compart-
ment heater* - timer (p. 144).
Additional heater*
Auto On
Off
For more information, see Additional heater* (p. 148).
TC options
Distance to empty tank
Fuel consumption
Average speed
Trip meter
T1 and total dist.
Trip meter
T2 and total dist.
Here you can select/activate the options that you want to be available as selectable headings in
the trip computer. The symbols for the items already selected are WHITE with a "tick" - others are
GREY and have no "tick":
1. Open the function with OK, scroll through the symbols for the options with the thumbwheel
and select/stop on the desired symbol.
2. Confirm with OK - the symbol changes colour from GREY to WHITE and is marked with a
"tick".
3. Continue to select the function symbols with the thumbwheel or finish with RESET.
Service status
Shows the number of months and mileage to next service.
||
03 Instruments and controls
03
118
Functions Information
Oil level
A
For more information, see Engine oil - checking and filling (p. 356).
Messages (##)
For more information, see Messages - handling (p. 113).
A
Certain engines.
Headings
One of the headings in the following table can
be selected for constant display in the com-
bined instrument panel. Proceed as follows to
determine which:
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
two presses on RESET.
2. Turn the thumbwheel - selectable head-
ings for the trip computer are shown in a
loop.
3. Stop on desired heading.
Trip computer heading in combined instrument
panel
Information
Trip meter T1 and total dist.
Long press on RESET resets trip meter T1.
Trip meter T2 and total dist.
Long press on RESET resets trip meter T2.
Distance to empty
For more information - see the section "Range - distance to empty tank" (p. 124).
Fuel consumption
Current consumption.
Average speed
Long press on RESET resets
Average speed.
No trip computer information. This option shows a blank display - it also marks the beginning/end of the loop.
The combined instrument panel's trip com-
puter can be changed to another option at
any time during the journey. Proceed as fol-
lows:
Turn the thumbwheel - stop on the
desired heading.
Resetting - Trip meter and Average
speed
With the current trip computer heading - T1
and total dist.,T2 and total dist. or
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
119
Average speed - shown in the combined
instrument panel:
Give a long press on RESET - selected
heading is zeroed.
Each heading must be zeroed individually.
Related information
Trip computer (p. 114)
Trip computer - supplementary informa-
tion (p. 124)
Trip computer - trip statistics* (p. 125)
03 Instruments and controls
03
120
Trip computer - digital combined
instrument panel
The trip computer's menu is in a variable
loop. One of the alternatives is that the trip
computer's three displays extinguish - this
also marks the start/end of the loop.
Information displays and stalk switch controls.
OK - Opens the loop with the trip com-
puter's functions + Activates the selected
option.
Thumbwheel - Opens the loop with the
trip computer's headings + Scrolls
through the options.
RESET - Undoes, zeroes or backs out of
a function after making a selection.
Functions
Proceed as follows to open and check/adjust
functions:
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
two presses on RESET.
2. Press OK - loop with all functions opens.
3. Browse through the functions with the
thumbwheel and select/confirm with OK.
4. Finish by pressing twice on RESET after
completed checking/adjustment.
The different functions of the trip computer
are listed in the following table:
03 Instruments and controls
03
}}
* Option/accessory, for more information, see Introduction.
121
Functions Information
Trip computer reset
Average
Average speed
Note that this function does not reset both trip meters T1 and T2 - see table under next section
"Headings" and section "Resetting - Average speed/consumption" for information on the proc-
ess.
Messages
For more information, see Messages - handling (p. 113).
Themes
The appearance of the combined instrument panel (p. 63) is selected here.
Settings* Select Auto On or Off.
For more information, see Additional heater* (p. 148).
Contrast mode/Colour mode
Adjusting the combined instrument panel's brightness and colour intensity.
Parking heater*
Direct start
- Symbol Timer 1 - leads to the menu for
selecting time.
- Symbol Timer 2 - leads to the menu for
selecting time.
For a description of programming the timer, see Engine block heater and passenger compart-
ment heater* - timer (p. 144).
Service status
Shows the number of months and mileage to next service.
Oil level
A
For more information, see Engine oil - checking and filling (p. 356).
A
Certain engines.
||
03 Instruments and controls
03
122
Headings
Three trip computer headings can be displayed
simultaneously - one in each "window".
One of the heading combinations in the fol-
lowing table can be selected for constant dis-
play in the combined instrument panel. Pro-
ceed as follows to determine which:
1. To ensure that no control is in the middle
of a sequence - "Reset" them first with
two presses on RESET.
2. Turn the thumbwheel - selectable head-
ing combinations are shown in a loop.
3. Stop on desired heading combination.
Heading combinations Information
Average Trip meter T1 + Meter reading Average speed
Long press on RESET resets trip meter T1.
Instantaneous Trip meter T2 + Meter reading Distance to empty
tank
Long press on RESET resets trip meter T2.
Instantaneous Meter reading kmh<>mph kmh<>mph - see section "Digital speed display" (p. 124).
No trip computer information. This option extinguishes all three trip computer displays - it also marks
the beginning/end of the loop.
The combined instrument panel's heading
combination for the trip computer can be
changed to another option at any time during
the journey. Proceed as follows:
Turn the thumbwheel - stop on the
desired heading.
Resetting - Trip meter
Turn with the thumbwheel to the heading
combination containing the trip meter to be
reset:
Give a long press on RESET - selected
trip meter is zeroed.
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
123
Resetting - Average speed/
consumption
1.
Select function
Trip computer
reset and activate with OK.
2. Select one of the following options with
the thumbwheel and activate with OK:
l/100 km
km/h
Reset both
3. Finish with RESET.
Related information
Trip computer - supplementary informa-
tion (p. 124)
Trip computer - trip statistics* (p. 125)
03 Instruments and controls
03
124
* Option/accessory, for more information, see Introduction.
Trip computer - supplementary
information
Supplementary information covering several
functions follows below.
Average
Average fuel consumption is calculated from
the last resetting.
NOTE
There may be a slight deviation if a fuel-
driven heater* has been used.
Average speed
The average speed is calculated for the driv-
ing distance driven since the last reset to
zero.
Instantaneous
The information for current fuel consumption
is updated continuously - approximately once
per second. When the car is driven at low
speed the consumption is shown per time
unit - at a higher speed it is shown related to
mileage.
Different units (km/miles) can be selected for
the display - see section "Change unit"
(p. 124).
Range - distance to empty tank
The trip computer shows the approximate
distance that can be driven with the fuel
quantity remaining in the tank.
No guaranteed range remains when the head-
ing
Distance to empty shows "----".
In which case, refuel as soon as possible.
The calculation is based on the average fuel
consumption over the last 30 km and the
remaining driveable fuel quantity.
NOTE
There may be a slight deviation if the driv-
ing style has been changed.
An economic driving style generally results in
a longer driving distance. For more informa-
tion on how fuel consumption can be influ-
enced, see Volvo Car Corporation 's Environ-
mental Philosophy (p. 21).
Digital speed display
26
The speed is shown in the opposite unit
(kmh/mph) in relation to the main instrument.
If it is calibrated in mph then the trip com-
puter shows the corresponding speed in
km/h and vice versa.
Change unit
You can change unit (km/miles) for distance
and speed in the menu system MY CAR, see
MY CAR (p. 113).
NOTE
In addition to in the trip computer, these
units are also changed in Volvo's naviga-
tion system*.
Related information
Trip computer - trip statistics* (p. 125)
26
Only with combined instrument panel "Digital".
03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
125
Trip computer - trip statistics*
Information is stored about completed trips
containing average fuel consumption and
average speed, which can be viewed in the
centre console's screen as a bar chart.
Function
Trip statistics
27
Each bar symbolises 1 km or 10 km driven
distance, depending on the scale selected -
the bar at the far right shows the value for the
current kilometre or 10 km.
Using the TUNE control, the scale for the
bars can be changed between 1 km and
10 km - the cursor on the far right changes
position between up and down in relation to
the scale selected.
Operation
Different settings can be made in the menu
system MY CAR, see MY CAR (p. 113) -
there, find
Trip statistics.
With the "Reset when vehicle has been off
for minimum 4h" option highlighted, all sta-
tistics are deleted automatically once driving
is complete and the car has been stopped for
4 hours. Trip statistics start again from zero
the next time the engine is started.
Reset when vehicle has been off for
minimum 4h - highlight the box by
selecting ENTER and go back out of the
menu by selecting EXIT.
If a new driving cycle is started before
4 hours have elapsed then the current period
must first be deleted manually using the
"
Start new trip" option.
Start new trip - ENTER is used to delete
all previous statistics, go back out of the
menu by selecting EXIT.
See also information on Eco guide (p. 67).
Related information
Trip computer - supplementary informa-
tion (p. 124)
27
The figure is schematic - layout may vary depending on car model or updated software.
CLIMATE CONTROL
04 Climate control
04
* Option/accessory, for more information, see Introduction.
127
General information on climate
control
The car is equipped with electronic climate
control (p. 133). The climate control system
cools or heats as well as dehumidifies the air
in the passenger compartment.
NOTE
Air conditioning (AC) (p. 137) can be
switched off, but to ensure the best possi-
ble climate comfort in the passenger com-
partment, and to prevent the windows
from misting, it should always be switched
on.
To bear in mind
To ensure that the air conditioning works
optimally, the side windows, and sunroof*
should be closed.
Global opening (p. 181) opens/closes all
side windows simultaneously and can be
used for example to quickly air the car
during hot weather.
Remove ice and snow from the climate
control system air intake (the grille
between the bonnet and the windscreen).
In warm weather, condensation from the
air conditioning may drip under the car.
This is normal.
When the engine requires full power, e.g.
for full acceleration, the air conditioning
can be temporarily switched off. There
may then be a temporary increase in tem-
perature in the passenger compartment.
Remove misting on the insides of the win-
dows primarily by using the defroster
function (p. 137). To reduce the risk of
misting, keep the windows clean and use
window cleaner.
Cars with Start/Stop*
With an auto-stopped (p. 279) engine certain
equipment may have its function temporarily
reduced, e.g. climate control fan speed
(p. 136).
Cars with ECO*
Certain equipment may have its function tem-
porarily reduced or deactivated when the
ECO (p. 288) function is activated, e.g. the air
conditioning (p. 137).
NOTE
When the ECO function is activated, sev-
eral parameters in the climate control sys-
tem's settings are changed, and several
electricity consumer functions are
reduced. Certain settings can be reset
manually, but full functionality is only
restored by deactivating the ECO function.
Related information
Actual temperature (p. 128)
Menu settings - climate control (p. 130)
Electronic climate control - ECC (p. 133)
Air distribution in the passenger compart-
ment (p. 131)
Air quality (p. 128)
04 Climate control
04
128
* Option/accessory, for more information, see Introduction.
Actual temperature
The temperature you select in the passenger
compartment corresponds to the physical
experience with reference to factors such as
ambient temperature, air speed, humidity and
solar radiation etc. in and around the car at
the time.
The system includes a sun sensor (p. 128)
which detects on which side the sun is shin-
ing into the passenger compartment. This
means that the temperature can differ
between the right and left-hand air vents
despite the controls being set for the same
temperature on both sides.
Related information
General information on climate control
(p. 127)
Temperature control in the passenger
compartment (p. 136)
Sensors - climate control
The climate control system has a number of
sensors to help control the temperature
(p. 128) in the car.
The sun sensor is located on the top side
of the dashboard.
The temperature sensor for the passen-
ger compartment is located below the cli-
mate control panel.
The outside temperature sensor is
located in the door mirror.
The humidity sensor* is located by the
interior rearview mirror.
NOTE
Do not cover or block the sensors with
clothing or other objects.
Related information
General information on climate control
(p. 127)
Air quality
The interior in a passenger compartment is
designed to be pleasant and comfortable,
even for people with contact allergies and for
asthma sufferers.
Passenger compartment filter (p. 129)
Material in the passenger compartment
(p. 130)
Clean Zone Interior Package (CZIP)
(p. 129)*
Interior Air Quality System (IAQS)
(p. 130)*
Related information
General information on climate control
(p. 127)
04 Climate control
04
* Option/accessory, for more information, see Introduction.
129
Air quality - passenger compartment
filter
All air entering the car's passenger compart-
ment is cleaned with a filter.
The filter must be replaced at regular inter-
vals. Follow the Volvo Service Programme for
the recommended replacement intervals. If
the car is used in a severely contaminated
environment, it may be necessary to replace
the filter more often.
NOTE
There are different types of passenger
compartment filter. Make sure that the cor-
rect filter is fitted.
Related information
Air quality (p. 128)
Air quality - Clean Zone Interior
Package (CZIP)*
CZIP comprises a series of modifications that
keep the passenger compartment even
clearer from allergy and asthma-inducing sub-
stances.
The following is included:
An enhanced fan function that means that
the fan starts when the car is opened with
the remote control key. The fan fills the
passenger compartment with fresh air.
The function starts when required and is
disengaged automatically after a time or
when one of the passenger compartment
doors is opened. The amount of time the
fan runs is reduced gradually due to
reduced need up until the car is 4 years
old.
The air quality system IAQS (p. 130) is a
fully automatic system that cleans the air
in the passenger compartment from con-
taminants such as particles, hydrocar-
bons, nitrous oxides and ground-level
ozone.
NOTE
To keep the CZIP standard in cars with
CZIP the IAQS filter must be changed after
15 000 km or once per year depending on
whichever occurs first. However, up to
75 000 km over 5 years. In cars without
CZIP and where the customer does not
want to keep the CZIP standard the IAQS
filter must be changed at a regular service.
For more information on CZIP, see the bro-
chure included with the purchase of the car.
Related information
General information on climate control
(p. 127)
Air quality (p. 128)
04 Climate control
04
130
* Option/accessory, for more information, see Introduction.
Air quality - IAQS*
The air quality system IAQS separates gases
and particles to reduce the levels of odours
and pollution in the passenger compartment.
If the outside air is contaminated then the air
intake is closed and the air is recirculated.
It is possible to activate/deactivate the func-
tion in the menu system MY CAR. For a
description of the menu system, see MY CAR
(p. 113).
NOTE
The air quality sensor must always be ena-
bled to ensure the best air in the passen-
ger compartment.
In a cold climate recirculation is limited so
as to prevent misting.
In the event of misting, the air quality sen-
sor should be disengaged, and the
defroster functions for the windscreen and
side windows, as well as the rear window,
should be used.
Related information
General information on climate control
(p. 127)
Air quality (p. 128)
Air quality - Clean Zone Interior Package
(CZIP)* (p. 129)
Air quality - material
Tested materials have been developed in
order to minimise the quantity of dust in the
passenger compartment and to contribute to
making the passenger compartment easier to
keep clean.
The carpets in both the passenger compart-
ment and the cargo area are removable and
easy to remove and clean. Use cleaning
agents and car care products recommended
by Volvo to clean the interior (p. 393).
Related information
Air quality (p. 128)
Menu settings - climate control
It is possible to activate/deactivate or change
the default settings for six of the climate con-
trol system's functions via the centre console.
Fan level during automatic climate control
(p. 136).
Recirculation timer (p. 138).
Automatic start of rear window defroster
(p. 106).
Interior air quality system* (p. 130).
Automatic start of seat heating driver
(p. 134).
Automatic start of steering wheel heating
(p. 85).
More information is available in the descrip-
tion of the menu system (p. 113).
The climate control system's functions can be
reset in the menu system MY CAR to the
default settings. For a description of the
menu system, see MY CAR (p. 113).
Related information
General information on climate control
(p. 127)
04 Climate control
04
}}
131
Air distribution in the passenger
compartment
The incoming air is divided between a number
of different vents in the passenger compart-
ment.
G017699
Air distribution is fully automatic in AUTO
mode.
If necessary it can be controlled manually;
see the air distribution table (p. 140).
Air vents in the dashboard
Closed
Open
Lateral airflow
Vertical airflow
Aim the outer vents at the side windows to
remove misting.
Air vents in the door pillars
G021368
Closed
Open
Lateral airflow
Vertical airflow
Aim the vents at the windows to remove mist-
ing in cold weather.
Aim the vents into the passenger compart-
ment to maintain a comfortable climate in the
rear seat in hot weather.
NOTE
Remember that small children may be sen-
sitive to air flows and draughts.
||
04 Climate control
04
132
Air distribution
Air distribution - defroster windscreen
Air distribution - air vent instrument panel
Air distribution - ventilation floor
The figure consists of three buttons. When
pressing the buttons the corresponding figure
is illuminated in the screen (see following fig-
ure) and an arrow in front of each part of the
figure shows the air distribution that is
selected. For more information, see the air
distribution table (p. 140).
The selected air distribution is shown in the cen-
tre console display screen.
Related information
General information on climate control
(p. 127)
Auto-regulation (p. 136)
Air distribution - recirculation (p. 138)
04 Climate control
04
* Option/accessory, for more information, see Introduction.
133
Electronic climate control - ECC
ECC (Electronic Climate Control) maintains
the temperature selected in the passenger
compartment and can be set separately for
the driver's side and passenger side.
The auto function is used to automatically
control temperature, air conditioning, fan
speed, recirculation and air distribution.
Temperature control (p. 136), left-hand
side
Electrically heated front seat (p. 134) , left
side
1
Heated windscreen* and max. defroster
(p. 137)
Fan (p. 136)
Air distribution (p. 131) - ventilation floor
Air distribution - air vent instrument panel
Air distribution - defroster windscreen
Rear window and door mirror defrosters
(p. 106)
Electrically heated front seat (p. 134),
right-hand side
1
Temperature control (p. 136), right-hand
side
Recirculation (p. 138)
ECO* (p. 288)
AUTO - Automatic climate control
(p. 136)
AC - Air conditioning on/off (p. 137)
Ventilated front seat (p. 135)*, left-hand
side
Ventilated front seat*, right-hand side
Related information
General information on climate control
(p. 127)
1
The button has a different location depending on whether or not the car is equipped with ventilated front seat*.
04 Climate control
04
134
* Option/accessory, for more information, see Introduction.
Heated front seats*
The front seat heating has three positions for
increasing the comfort for driver and passen-
ger when it is cold.
Current heat level is shown in the centre console
display screen.
The button has a different
location depending on
whether or not the car is
equipped with ventilated
front seat*, see illustration
(p. 133).
Press the button repeatedly in order to acti-
vate the function:
Highest heat level - three orange fields
illuminate in the centre console's screen
(see figure above).
Lower heat level - two orange fields illu-
minate in the screen.
Lowest heat level - one orange field illu-
minates in the screen.
Switch off the heat - no field illuminates.
WARNING
Heated seats must not be used by people
who find it difficult to perceive an increase
in temperature due to a lack of sensation
or who otherwise have problems operating
the controls for the heated seats. Other-
wise they may suffer burn injuries.
Automatic start of driver's seat heating
With the automatic start of the driver's seat
heating activated, the driver's seat will have
the highest heat level when the engine is
started.
Automatic start takes place when the car is
cold and the ambient temperature is lower
than approx. +10 °C.
It is possible to activate/deactivate the func-
tion in the menu system MY CAR. For a
description of the menu system, see MY CAR
(p. 113).
Related information
General information on climate control
(p. 127)
Heated rear seat* (p. 134)
Heated rear seat*
The heating for the rear seat's
2
outer posi-
tions has three positions for increasing the
comfort for passengers when it is cold.
Current heat level is shown in the pushbutton's
lamps.
Press the button repeatedly in order to acti-
vate the function:
Highest heat level - three lamps illumi-
nate.
Lower heat level - two lamps illuminate.
Lowest heat level - one lamp illuminates.
Switch off the heat - no lamp illuminates.
04 Climate control
04
* Option/accessory, for more information, see Introduction.
135
WARNING
Heated seats must not be used by people
who find it difficult to perceive an increase
in temperature due to a lack of sensation
or who otherwise have problems operating
the controls for the heated seats. Other-
wise they may suffer burn injuries.
Related information
General information on climate control
(p. 127)
Heated front seats* (p. 134)
Ventilated front seats*
The ventilation can be used at the same time
as seat heating. For example, the function can
be used to dry damp from clothing.
The ventilation system consists of fans in the
seats and backrests that draw air through the
seat upholstery. The cooling effect increases
the cooler the passenger compartment air
becomes. The system can be activated when
the engine is running.
The ventilation is regulated from the climate
control and takes seat temperature, solar
radiation and outside temperature into consi-
deration.
Current comfort level is shown in the centre con-
sole display screen.
For button location, see the
illustration (p. 133).
Press the button repeatedly
in order to activate the func-
tion.
There are three comfort levels that produce
different cooling and dehumidification out-
puts:
Comfort level III: Highest output - three
blue fields illuminate in the centre con-
sole's screen (see figure above).
Comfort level II: Lower output - two blue
fields illuminate in the screen.
Comfort level I: Lowest output - one blue
field illuminates in the screen.
Switch off the function - no field illumi-
nates.
NOTE
The seat ventilation should be used care-
fully by people sensitive to draughts. Com-
fort level I is recommended for long-term
use.
IMPORTANT
The seat ventilation cannot be started
when the passenger compartment tem-
perature is below 5 °C. This is in order to
avoid cooling down the seat occupant.
2
Heated rear seat is not specified with the option for integrated two-stage booster seat (p. 48).
04 Climate control
04
136
Fan
The fan should always be activated in order to
avoid misting on the windows.
NOTE
If the fan is fully switched off then the air
conditioning is not engaged - which can
cause a risk of misting on the windows.
Fan knob
Turn the knob to increase or
decrease fan speed. If AUTO
is selected, then the fan
speed is regulated automati-
cally (p. 136) - the fan speed
previously set is disengaged.
Related information
General information on climate control
(p. 127)
Electronic climate control - ECC (p. 133)
Auto-regulation
The auto function automatically regulates
temperature (p. 136), air conditioning
(p. 137), fan speed (p. 136), recirculation
(p. 138) and air distribution (p. 131).
If you select one or more
manual functions, the other
functions continue to be
controlled automatically. All
manual settings are disen-
gaged when AUTO is
pressed. The display screen
shows
AUTO CLIMATE.
Fan speed in automatic mode can be set in
the menu system MY CAR. For a description
of the menu system, see MY CAR (p. 113).
Related information
General information on climate control
(p. 127)
Temperature control in the passenger
compartment
When the car is started, the most recent tem-
perature setting is resumed.
NOTE
Heating or cooling cannot be hastened by
selecting a higher or lower temperature
than the actual desired temperature.
Current temperature for each side is shown in
the centre console's display screen.
The temperature can be
adjusted with the knob -
separately for the driver's
side and the passenger side.
04 Climate control
04
}}
* Option/accessory, for more information, see Introduction.
137
Related information
General information on climate control
(p. 127)
Actual temperature (p. 128)
Electronic climate control - ECC (p. 133)
Air conditioning
The air conditioning cools and dehumidifies
incoming air as required.
When the lamp in the AC
button illuminates, the air
conditioning is controlled by
the system's automatic func-
tion.
When the lamp in the AC
button is switched off the air conditioning is
disconnected. Other functions are still con-
trolled automatically. When the max.
defroster function (p. 137) is activated, the air
conditioning is switched on automatically so
that the air is dehumidified at the maximum
setting.
Demisting and defrosting the
windscreen
Heated windscreen* and max. defroster are
used to quickly remove misting and ice from
the windscreen and side windows.
The selected setting is shown in the centre con-
sole's screen.
Heated windscreen*
Max. defroster
The light in the defroster but-
ton illuminates when the
function is active.
Press the button repeatedly
in order to activate the func-
tion.
||
04 Climate control
04
138
* Option/accessory, for more information, see Introduction.
For cars without heated windscreen:
Air flows to the windows - symbol (2) illu-
minates in the screen.
Switch off the function - no symbol illumi-
nates.
For cars with heated windscreen:
Start the heating for the windscreen
3
-
symbol (1) illuminates in the screen.
Start the heating for the windscreen
3
and
air flow to the windows - symbols (1) and
(2) illuminate in the screen.
Switch off the function - no symbol illumi-
nates.
NOTE
Heated windscreen and IR window (p. 19)
may have an impact on the performance of
transponders and other communication
equipment.
NOTE
A triangular area at the end of each side of
the windscreen is not electrically heated,
where de-icing may take longer.
NOTE
Electrically heated windscreen is not avail-
able when the engine is auto-stopped
(p. 279).
The following also takes place in order to pro-
vide maximum dehumidification in the pas-
senger compartment:
the air conditioning is automatically
engaged
recirculation and the air quality system
are automatically disengaged.
NOTE
The noise level increases as the fan is
operating at max.
When the defroster is switched off the climate
control returns to the previous settings.
Related information
General information on climate control
(p. 127)
Air distribution - recirculation
Select recirculation to shut out bad air,
exhaust gases etc. from the passenger com-
partment, i.e. no outside air is taken into the
car when this function is activated.
When recirculation is
engaged the orange lamp in
the button illuminates.
IMPORTANT
If the air in the car is recirculated for too
long then there is a risk of misting on the
insides of the windows.
Timer
With the timer function activated the system
will exit manually activated recirculation mode
according to a time that depends on the out-
side temperature. This reduces the risk of ice,
misting and bad air.
It is possible to activate/deactivate the func-
tion in the menu system MY CAR. For a
description of the menu system, see MY CAR
(p. 113).
3
If the character
C is shown in the rearview mirror when the heated windscreen is activated then the compass (p. 107)* must be recalibrated.
04 Climate control
04
139
NOTE
When max. defroster is selected, recircula-
tion is always deactivated.
Related information
General information on climate control
(p. 127)
Air distribution in the passenger compart-
ment (p. 131)
Air distribution - table (p. 140)
04 Climate control
04
140
Air distribution - table
Three buttons are used to select the distribu-
tion (p. 131) of the air.
Air distribution Use
Air to windows. Some air flows from the air vents. The air is not
recirculated. Air conditioning is always engaged.
to remove ice and misting quickly.
Air to windscreen, via defroster vent, and side windows. Some air
flows from the air vents.
to prevent misting and icing in a cold and humid climate,
(not at too low fan speed to enable this).
Airflow to windows and from dashboard air vents. to ensure good comfort in warm, dry weather.
Airflow to the head and chest from dashboard air vents. to ensure efficient cooling in warm weather.
04 Climate control
04
141
Air distribution Use
Air to the floor and windows. Some air flows from the dashboard
air vents.
to ensure comfortable conditions and good demisting in
cold or humid weather.
Air to floor and from dashboard air vents. in sunny weather with cool outside temperatures.
Air to floor. Some air flows to the dashboard air vents and win-
dows.
to direct heat or cold to the floor.
Airflow to windows, from dashboard air vents and to the floor. to provide cooling along the floor in hot, dry weather or
warming upwards in cold weather.
Related information
General information on climate control
(p. 127)
Air distribution - recirculation (p. 138)
04 Climate control
04
142
* Option/accessory, for more information, see Introduction.
Engine and passenger compartment
heater*
Preconditioning prepares the car's heater,
engine and passenger compartment before
departure so that both wear and energy
needs during the journey are reduced.
The heater can be started directly (p. 143) or
with a timer (p. 144).
The heater cannot start if the outside tem-
perature exceeds 15 °C. At –5 °C or lower the
maximum running time of the heater is 50
minutes.
WARNING
Do not use the fuel-driven heater indoors.
Exhaust gases are secreted.
NOTE
When the fuel-driven auxiliary heater is
active there may be smoke from the right-
hand wheel housing, which is perfectly
normal.
Refuelling
Warning label on fuel filler flap.
WARNING
Fuel which spills out could be ignited.
Switch off the fuel-driven auxiliary heater
before starting to refuel.
Check in the combined instrument panel
that the heater is switched off. The heat
symbol is shown when it is operating.
Parking on a hill
If the car is parked on a steep hill, the front of
the car should point downhill to ensure that
there is a supply of fuel to the fuel-driven
heater.
Battery and fuel
If the battery has insufficient charge or the
fuel level is too low, the heater will be
switched off automatically and a message
appears on the information display. Acknowl-
edge the message by pressing the indicator
stalk (p. 110) OK button once.
IMPORTANT
Repeated use of the heater combined with
short journeys leads to the battery dis-
charging and consequential starting prob-
lems.
The car should be driven for the same time
as the heater is used to ensure that the
car's battery is recharged adequately to
replace the energy consumed by the
heater when it is used on a regular basis.
The heater is used for a maximum of 50
minutes each time.
Related information
Engine block heater and passenger com-
partment heater* - messages (p. 146)
Additional heater* (p. 148)
04 Climate control
04
* Option/accessory, for more information, see Introduction.
143
Engine block heater and passenger
compartment heater* - direct start
The engine block heater and passenger com-
partment heater can be started directly.
Direct start can be performed via:
information display
remote control key*
mobile*.
Upon direct start of the engine block and
passenger compartment heater (p. 142), it will
run for 50 minutes.
Heating of the passenger compartment will
begin as soon as the engine coolant has
reached the correct temperature.
NOTE
The car can be started and driven while
the heater is running.
Direct start via the information display
1. Press OK to access the menu.
2.
Scroll with the thumbwheel to
Parking
heater and select with OK.
3.
Scroll forward in the next menu to
Direct
start
in order to activate the heater and
select with OK.
4. Exit the menu with RESET.
Direct start via the remote control key*
Indicator lamp on remote control key with PCC*.
The engine block heater and passenger com-
partment heater can be activated via the
remote control key:
Hold the button for approach lighting
depressed for 2 seconds.
Hazard warning flashers provide informa-
tion in accordance with the following:
5 short flashes followed by a constant
glow for approx. 3 seconds - the signal
has reached the car and the heater has
been activated.
5 short flashes - the signal has
reached the car but the heater has not
been activated.
Hazard warning flashers remain
switched off - the signal has not
reached the car.
If the button for information
is depressed
when the heater is active then the indicator
lamp will show the status for this - at the
same time the car's lock status (p. 169) is
shown. While the status is being investigated
the indicator lamp emits a pair of short
flashes followed by a constant glow if the
heater is active.
Status is also shown in the trip computer dur-
ing heating.
Direct start via a mobile*
Activation and information about the selected
settings that can be managed from a mobile
phone will be available via the Volvo On Call*
mobile app.
Related information
Engine block heater and passenger com-
partment heater* - timer (p. 144)
Engine block heater and passenger com-
partment heater* - immediate stop
(p. 144)
Engine block heater and passenger com-
partment heater* - messages (p. 146)
04 Climate control
04
144
* Option/accessory, for more information, see Introduction.
Engine block heater and passenger
compartment heater* - immediate
stop
The engine block heater and passenger com-
partment heater can be deactivated directly
via the information display.
1. Press OK to access the menu.
2.
Scroll with the thumbwheel to
Parking
heater and select with OK.
3.
Scroll forward in the next menu to
Stop in
order to deactivate the heater and select
with OK.
4. Exit the menu with RESET.
Related information
Engine block heater and passenger com-
partment heater* - direct start (p. 143)
Engine block heater and passenger com-
partment heater* - timer (p. 144)
Engine block heater and passenger com-
partment heater* - messages (p. 146)
Engine block heater and passenger
compartment heater* - timer
The timer of the engine block and passenger
compartment heater (p. 142) is connected to
the car's clock.
Two different times can be selected using the
timer. Here, time refers to the time when the
car is heated and ready. The car's electronic
system calculates when heating should be
started based on the outside temperature.
NOTE
All timer programming will be cleared if the
car's clock is reset.
Adjusting
4
1. Press OK to access the menu.
2. Use the thumbwheel (p. 110) to scroll to
one of the timers
Parking heater and
select with OK.
3. Select one of the two timers using the
thumbwheel and confirm with OK.
4. Briefly press OK to move to the lit hours
setting.
5. Select the required hour using the thumb-
wheel.
6. Briefly press OK to move to the flashing
minutes setting.
7. Select the required minute using the
thumbwheel.
8.
Press OK
5
to confirm the setting.
9. Go back in the menu structure using
RESET.
10. Select the other time (continue from step
2) or exit the menu with RESET.
Starting
1. Press OK to access the menu.
2.
Scroll with the thumbwheel to
Parking
heater and select with OK.
3. Select one of the two timers using the
thumbwheel and activate with OK.
4. Exit the menu with RESET.
Switching off
A timer-started heater can be switched off
manually before the set time has elapsed.
Proceed as follows:
1. Press OK to access the menu.
4
Setting the timer is only possible with the engine switched off.
5
Press OK again to activate the timer.
04 Climate control
04
146
* Option/accessory, for more information, see Introduction.
Engine block heater and passenger
compartment heater* - messages
Symbols and display messages regarding the
engine block and passenger compartment
heater (p. 142) differ depending on whether
the combined instrument panel (p. 63) is ana-
logue or digital.
When the heater has been activated
the heat symbol illuminates in the
information display.
When one of the timers has been activated,
the symbol for activated timer illuminates in
the display at the same time as the set time is
shown next to the symbol.
Symbol for activated timer in ana-
logue combined instrument panel.
Symbol for activated timer in digital
combined instrument panel.
The table shows symbols and display texts
that appear.
Symbol Message Specification
The heater is switched on and running.
Fuel operated heater stopped
Battery saving mode
The heater has been stopped by the car's electronics in order to facilitate starting the engine.
04 Climate control
04
147
Symbol Message Specification
Fuel operated heater stopped
Low fuel level
Starting the heater is not possible due to fuel level being too low - this is in order to facilitate
starting the engine as well as approx. 50 km driving.
Fuel operated heater Service
required
Heater not working. Contact a workshop for repair. Volvo recommends that you contact an
authorised Volvo workshop.
A display text clears automatically after a time
or after one press on the indicator stalk
(p. 110) OK button.
04 Climate control
04
148
* Option/accessory, for more information, see Introduction.
Additional heater*
In cold climate zones
6
an additional heater
may be required to obtain the correct operat-
ing temperature in the engine and to obtain
sufficient heating in the passenger compart-
ment.
A fuel-driven additional heater (p. 148) is fit-
ted in cars with diesel engines.
In a semi-cold
6
climate zone diesel-driven
cars have an electric additional heater
(p. 149) instead of a fuel-driven version.
Cars with certain petrol engines
7
have an
electric additional heater integrated into the
car's climate control system.
Related information
Engine and passenger compartment
heater* (p. 142)
Fuel-driven additional heater*
The car is equipped with either an electric
(p. 149) or a fuel-driven additional heater
(p. 148).
The heater starts automatically when extra
heat is required when the engine is running.
The heater is switched off automatically when
the correct temperature is reached or when
the engine is switched off.
NOTE
When the additional heater is active there
may be smoke from the right-hand wheel
housing, which is perfectly normal.
Auto mode or shutdown
The additional heater's automatic start
sequence can be switched off if required.
NOTE
Volvo recommends that the fuel-driven
additional heater should be switched off
for short distances.
1. Before starting the engine: Select key
position I (p. 78).
2. Press OK to access the menu.
3.
Scroll with the thumbwheel to
Additional
heater
8
or
Settings
9
and select with OK.
4.
Select one of the options
ON or OFF
using the thumbwheel and confirm with
OK.
5. Exit the menu with RESET.
NOTE
The menu options are only visible in key
position I - any adjustments must therefore
be made before starting the engine.
Passenger compartment heater*
If the additional heater is supplemented with
a timer function then it can be used as a pas-
senger compartment heater (p. 142).
6
An authorised Volvo dealer has information regarding the geographical areas concerned.
7
An authorised Volvo dealer has information regarding the engines concerned.
8
Analogue combined instrument panel.
9
Digital combined instrument panel.
04 Climate control
04
* Option/accessory, for more information, see Introduction.
149
Electric additional heater*
The car is equipped with either a fuel-driven
(p. 148) or an electric additional heater
(p. 148).
The heater cannot be controlled manually, but
is instead activated automatically after the
engine has been started in outside tempera-
tures below 14 °C and is switched off after
the set passenger compartment temperature
has been reached.
Related information
Engine and passenger compartment
heater* (p. 142)
05 Loading and storage
05
}}
151
Storage spaces
Overview of storage spaces in the passenger
compartment.
||
05 Loading and storage
05
152
* Option/accessory, for more information, see Introduction.
Storage compartment in door panel
Storage pocket* on front edge of front
seat cushions
Ticket clip
Glovebox (p. 153)
Storage compartment
Storage compartment, cup holder
(p. 153)
Cup holder* in armrest, rear seat
Storage pocket
WARNING
Keep loose objects such as mobile
phones, cameras, remote controls for
accessories, etc. in the glove compartment
or other compartments. Otherwise they
may injure people in the car in the event of
sudden braking or a collision.
05 Loading and storage
05
* Option/accessory, for more information, see Introduction.
153
Tunnel console
The tunnel console is located between the
front seats.
Storage compartment (e.g. for CDs) and
USB*/AUX input under the armrest.
Includes cup holder for driver and pas-
senger. If ashtray and cigarette lighter
(p. 153) are specified, then there is a cig-
arette lighter in the 12 V socket (p. 154)
for the front seat, and a detachable ash-
tray in the cup holder.
Related information
Storage spaces (p. 151)
Tunnel console - cigarette lighter and
ashtray*
A detachable ashtray is fitted in the cup
holder under the armrest. The cigarette lighter
is fitted in the 12 V socket (p. 154) for the
front seat.
The ashtray in the tunnel console (p. 153) is
detached by lifting the tray straight up.
Activate the lighter by pushing in the button.
The button pops out when the lighter is hot.
Pull out the lighter and light a cigarette on the
heated coils.
Related information
Storage spaces (p. 151)
Glovebox
The glovebox is located on the passenger
side.
The owner's manual and maps can be kept in
here for example. There are also holders for
pens on the inside of the lid. The glovebox
can be locked* (p. 181) using the key blade
(p. 171).
Related information
Storage spaces (p. 151)
05 Loading and storage
05
154
* Option/accessory, for more information, see Introduction.
Inlay mats*
Inlay mats collect e.g. rubbish and slush.
Volvo supplies specially manufactured inlay
mats.
WARNING
Only use one inlaid mat at each seat, and
check before setting off that the mat by
the driver's seat is firmly affixed and
secured in the pins so that it does not get
caught adjacent to and under the pedals.
Related information
Cleaning the interior (p. 393)
Vanity mirror
The vanity mirror is located on the rear of the
sun visor.
G021438
Vanity mirror with lighting.
The lamp for the vanity mirror, on the driver's
side* and passenger side respectively, is
switched on automatically when the cover is
raised.
Related information
Lamp replacement - vanity mirror lighting
(p. 367)
Tunnel console - 12 V-sockets
The electrical sockets (12 V) are located next
to the cup holder
1
and rear of the tunnel con-
sole.
G021439
12 V socket in tunnel console, front seat.
G021440
12 V socket in tunnel console, rear seat.
1
If ashtray and cigarette lighter are specified then there is no cup holder and adjacent 12 V socket.
||
05 Loading and storage
05
156
* Option/accessory, for more information, see Introduction.
Cover sharp edges with something soft to
avoid damaging the upholstery.
Secure all loads to the load retaining eye-
lets with straps or web lashings.
WARNING
A loose object weighing 20 kg can, in a
frontal collision at a speed of 50 km/h,
carry the impact of an item weighing
1000 kg.
WARNING
The protection provided by the inflatable
curtain in the headlining may be compro-
mised or eliminated by high loads.
Never load cargo above the backrest.
WARNING
Always secure the load. During heavy
braking the load may otherwise shift, caus-
ing injury to the car's occupants.
Cover sharp edges and sharp corners with
something soft.
Switch off the engine and apply the park-
ing brake when loading/unloading long
items. Otherwise you may accidentally
knock the gear lever or gear selector with
the load into a drive position - and the car
could then move off.
Related information
Safety net* (p. 159)
Loading - long load (p. 156)
Roof load (p. 157)
Loading - long load
To simplify loading (p. 155) in the cargo area,
the rear seat backrest can be folded down.
The passenger seat
2
backrest can also be
folded for an extra long load*.
Lowering the rear seat backrest
To simplify loading in the cargo area, the rear
seat backrest can be folded down, see Seats,
rear (p. 82).
2
Only applies to comfort seats.
05 Loading and storage
05
157
Roof load
The load carriers recommended for roof loads
are the ones developed by Volvo. This is in
order to avoid damage to the car and in order
to achieve the maximum possible safety dur-
ing a journey.
Carefully follow the installation instructions
supplied with the carriers.
Check periodically that the load carriers
and load are properly secured. Lash the
load securely with retaining straps.
Distribute the load evenly over the load
carriers. Put the heaviest objects at the
bottom.
The size of the area exposed to the wind,
and therefore fuel consumption, increase
with the size of the load.
Drive gently. Avoid quick acceleration,
heavy braking and hard cornering.
WARNING
The car's centre of gravity and driving cha-
racteristics are altered by roof loads.
For information about the maximum per-
mitted load on the roof, including load car-
riers and any space box, see Weights
(p. 402).
Related information
Loading (p. 155)
Securing loads (p. 157)
Securing loads
On both sides of the car's cargo area there
are fixed mounting points designed for secur-
ing loads.
Mounting point locations in the cargo area.
The fixed mounting points are positioned in
the cargo rails in the cargo area floor. In the
illustration above, two of the mounting points
in the floor are shown in raised position. Their
basic position is lowered.
WARNING
Hard, sharp and/or heavy objects which
protrude may cause injury under violent
braking.
Always secure large and heavy objects
with a seatbelt or cargo retaining straps.
IMPORTANT
Do not use straps with exchange as these
may pull the mounting points apart.
NOTE
A suitable width for a cargo retaining strap
is approx. 25 mm.
Related information
Loading (p. 155)
05 Loading and storage
05
158
* Option/accessory, for more information, see Introduction.
Loading - bag holder*
The bag holder keeps carrier bags in place
and prevents them from overturning and
spreading their contents across the cargo
area.
G017745
Bag holder under folding hatch in the floor.
1. Fold up the holder, which is part of the
floor hatch.
2. Fasten the bags with strap and secure
the carrying handle in the hooks.
Related information
Loading (p. 155)
12 V electrical socket - cargo area*
The electrical socket can be used for various
accessories designed for 12 V, e.g. display
screens, music players and mobile phones.
Lower the cover to access the electrical
socket.
The socket also provides voltage when
the remote control key is not in the igni-
tion switch.
IMPORTANT
Max. power takeoff is 10 A (120 W).
NOTE
Remember that using the electrical socket
with the engine switched off involves the
risk of discharging the car's battery.
NOTE
The compressor for temporary emergency
puncture repair has been tested and
approved by Volvo. For information on the
use of Volvo's recommended temporary
emergency puncture repair (TMK), see
Emergency puncture repair* (p. 335).
Related information
Tunnel console - 12 V-sockets (p. 154)
05 Loading and storage
05
}}
* Option/accessory, for more information, see Introduction.
159
Safety net*
A safety net prevents loads from being thrown
forward in the passenger compartment in the
event of sudden braking.
Storage space, safety net cassettes.
A rollable safety net comprising two cassettes
has a storage space under the cargo area
floor hatch.
Securing the net cassettes
A rollable safety net comprising two cassettes
has a storage space under the cargo area
floor hatch.
The two-part safety net cassette is secured
on the rear of the backrest. The narrowest
cassette is secured on the left-hand side
(seen from the tailgate).
1. Fold the rear seat's backrest forward, see
Seats, rear (p. 82).
2. Align the cassette's anchor rails in front of
the backrest attachment lugs
.
3. Slide the cassette into the attachment
lugs
.
4. Fold back and lock the backrests.
Removing the cassette takes place in
reverse order.
Using the safety net
G018246
Pull the net up from the cassettes. The net is
self-locking after approx. one minute if the
rear seat's backrests are raised.
Pull up the right-hand section of the net
using its strap.
Insert the rod in the mounting on the
right-hand side and then press it forward
– the rod locks in with a click.
Pull out the rod's telescope section and
click it in on the other side.
Pull up the left-hand safety net and hook
it into the rod.
Folding up takes place in reverse order.
The net can also be used when the rear
seat's backrests are folded forward.
||
05 Loading and storage
05
160
* Option/accessory, for more information, see Introduction.
Removing the net cassettes
1. Roll the safety nets into the cassettes in
accordance with the procedure in the
section entitled "Using the safety net",
but in reverse.
2. Fold the whole backrest forward.
3. Slide the cassettes out until they loosen
from the anchor rails.
Store the cassettes in their compartment
under the cargo area floor hatch.
WARNING
Loads in the luggage compartment must
be anchored well, and also using a cor-
rectly fitted safety net.
Related information
Loading (p. 155)
Safety grille (p. 160)
Safety net* combined with cargo
cover
A safety net prevents loads from being thrown
forward in the passenger compartment in the
event of sudden braking.
G018247
Puller-straps for raising the net.
The safety net can also be raised from the
rear seat when the cargo cover is extended.
Follow the procedure described in the section
"Using the safety net" (p. 159). The straps for
folding up are located by the arrows.
Related information
Safety net* (p. 159)
Loading (p. 155)
Safety grille
A safety grille prevents loads or pets from
being thrown forward in the passenger com-
partment in the event of sudden braking.
G017748
Folding up
Take hold of the bottom of the safety grille
and pull back/up.
IMPORTANT
The protective grille cannot be folded up
or down when a cargo cover is fitted.
Fitting/removal
The safety grille is normally permanently
installed in the car because it can easily be
folded up in the roof and so be out of the way
if a longer cargo area is required. However, if
desired, the safety grille can be dismantled
and removed from the car.
05 Loading and storage
05
* Option/accessory, for more information, see Introduction.
161
For safety reasons, the safety grille must
always be correctly fastened and secured
when being refitted.
The backrests must first be lowered to allow
the safety grille to be fitted, see Seats, rear
(p. 82).
NOTE
The safety grille is most easily fitted/
removed by two people via the rear doors.
During fitting the handle should be on the
front of the grille, see the
illustrations
.
G018367
G018368
G018369
Position the handle in fitting position, see
illustration. Press gently on the handle to
enable it to be turned into position, see
arrow.
Press the strut in towards the grille and
align the grille in the roof mounting.
Turn the handle 90° . Press gently as in
the illustration (1) if necessary. Secure the
grille by angling the handle 90°
.
Removal of the grille takes place in
reverse order.
Related information
Safety net* (p. 159)
Loading (p. 155)
05 Loading and storage
05
162
Cargo cover
G017749
Pull the cargo cover over the load and hook it
into the recesses at the cargo area's rear
posts.
IMPORTANT
The protective grille cannot be folded up
or down when the cargo cover is fitted.
Attaching the cargo cover
Move one end piece of the cover into the
recess on the side panel.
Move the other end piece into the corres-
ponding recess.
Press both sides in. A "click" should be
audible and the red marking should dis-
appear.
> Check that both end pieces are
locked.
Removing the cargo cover
1. Press in one end piece button and lift it
out.
2. Carefully angle the cover up/out and the
other end piece loosens automatically.
Lowering the cargo cover's rear sealing
disc
In its rolled-in position, the cargo cover's rear
sealing disc protrudes horizontally into the
cargo area when it is fitted.
Pull the sealing disc back gently, free
from its support shelves, and lower.
Related information
Loading (p. 155)
Loading - long load (p. 156)
LOCKS AND ALARM
06 Locks and alarm
06
164
* Option/accessory, for more information, see Introduction.
Remote control key
Amongst other things, the remote control key
is used for locking/unlocking and starting the
engine.
There are two variants of remote control key -
Remote control key in basic version and
Remote control key with PCC (Personal Car
Communicator)*.
Functionality
Basic
A
with
PCC
B
Locking/unlocking
and detachable key
blade
x x
Keyless locking/
unlocking
x
Keyless engine star-
ting
x
Information button
and indicator lamps
x
A
5-button key
B
6-button key
Remote control key with PCC has extended
functionality compared with the remote con-
trol key in the basic version - e.g. support for
Keyless Drive (p. 175) and certain unique
functions (p. 169).
All remote control keys have a detachable key
blade (p. 171) made of metal. The visible
section is available in two versions so that it
is possible to distinguish between the remote
control keys.
More remote control keys can be ordered -
but not variants other than the one supplied
with the car. Up to six keys can be pro-
grammed and used for one single car.
The car is supplied with two remote control
keys
WARNING
If there are children in the car:
Remember to switch off the supply to the
power windows and sunroof by removing
the remote control key if the driver leaves
the car.
Related information
Remote control key - functions (p. 167)
Remote control key - losing
If you lose a remote control key then a new
one can be ordered at a workshop - an
authorised Volvo workshop is recommended.
The remaining remote control keys must be
taken to the Volvo workshop. The code of the
missing remote control key must be erased
from the system as a theft prevention meas-
ure.
The current number of keys registered to the
car can be checked in the menu system MY
CAR. For a description of the menu system,
see MY CAR (p. 113).
Related information
Remote control key - functions (p. 167)
||
06 Locks and alarm
06
166
* Option/accessory, for more information, see Introduction.
Seats, front - electrically operated*
(p. 81).
Adjust seat and door mirrors manually,
see Seats, front - electrically operated*
(p. 81) and Door mirrors (p. 105).
Reactivation of settings
When the car is locked or after 30 minutes if
the car is left unlocked, the key memory will
be deactivated and a standard driver profile
will be set. To reactivate the key memory for
the current remote control key, the following
is required.
For cars without Keyless Drive
The settings that are stored in the key mem-
ory are activated if the car is unlocked by
pressing the remote control key's unlock but-
ton.
For cars with Keyless Drive
The key memory is activated if:
1. The car is unlocked either by pressing the
remote control key's unlock button or via
keyless unlocking.
2. If the car is unlocked, a key scan is made
when the driver's door is opened. If a
unique remote control key is found, its
stored settings will be activated. If the car
is locked, see the previous point.
Related information
Remote control key with PCC* - unique
functions (p. 169)
Locking/unlocking - indicator
When the car is locked or unlocked using the
remote control key (p. 164) the direction indi-
cators confirm that locking/unlocking was
correctly performed.
Locking - one flash and the door mirrors
are folded
3
in.
Unlocking - two flashes and the door mir-
rors are folded
3
out.
After locking the indication is only given if all
locks are activated once the doors have been
closed.
Selecting the function
Different options for indicating locking/
unlocking with light can be set in the car's
menu system MY CAR. For a description of
the menu system, see MY CAR (p. 113).
Related information
Keyless drive* (p. 175)
Alarm indicator (p. 188)
Immobiliser
The electronic immobiliser is a theft protec-
tion system that prevents an unauthorised
person from starting the car.
Each remote control key (p. 164) has a unique
code. The car can only be started with the
correct remote control key with the correct
code.
The following error messages in the com-
bined instrument panel's information display
are related to the electronic immobiliser:
3
Only for cars with retractable power door mirrors.
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
167
Mes-
sage
Specification
Insert car
key
Error when reading the
remote control key during
starting - Remove the key
from the ignition switch, press
it in again and make a new
start attempt.
Car key
not found
Error reading the remote con-
trol key during starting - Try
to start again.
If the error persists: Insert the
remote control key into the
ignition switch and try to start
again.
Immobi-
liser Try
to start
again
Error in immobiliser system
during starting. If the error
persists: Contact a workshop
- an authorised Volvo work-
shop is recommended.
For starting the car, see Starting the engine
(p. 261).
Related information
Remote-controlled immobiliser with
tracking system* (p. 167)
Remote-controlled immobiliser with
tracking system*
Remote-controlled immobiliser with tracking
system
4
makes it possible to track and locate
the car, and to remotely activate the immobi-
liser to switch off the engine.
Contact your nearest Volvo dealer for more
information and assistance with activating the
system.
Related information
Remote control key (p. 164)
Immobiliser (p. 166)
Remote control key - functions
The remote control key in basic version has
functions such as locking and unlocking the
doors.
Functions
Remote control key in basic version.
Locking
Unlocking
Approach light duration
Tailgate
Panic function
4
Only certain markets and in combination with Volvo On Call*.
||
06 Locks and alarm
06
168
* Option/accessory, for more information, see Introduction.
Remote control key with PCC*( Personal Car
Communicator).
Information
Function buttons
Locking – Locks the doors and tailgate
while the alarm is activated.
Press and hold to close all the windows and
sunroof* simultaneously. For more informa-
tion, see Global opening (p. 181).
WARNING
If the sunroof and windows are closed
using the remote control key, check that
nobody's hands are trapped.
Unlocking – Unlocks the doors and tail-
gate while the alarm is deactivated.
Press and hold to open all windows simulta-
neously. For more information, see Global
opening (p. 181).
The function can be changed from unlocking
all doors simultaneously, to unlocking the
driver's door only with one press of the but-
ton and, after a further press of the button -
within ten seconds - unlocking the remaining
doors.
The function can be changed in the menu
system MY CAR. For a description of the
menu system, see MY CAR (p. 113).
Approach light duration – Used to
switch on the car's lighting at a distance. For
more information, see Approach lighting
(p. 96).
Tailgate - Unlocks and disarms the
alarm for the tailgate only. For more informa-
tion, see Locking/unlocking - tailgate
(p. 182). On cars with Power operated tail-
gate (p. 183)* the tailgate is opened after the
button is kept depressed.
Panic function – Used to attract atten-
tion in an emergency.
Press and hold the button for at least 3 sec-
onds or press it twice within 3 seconds to
activate the direction indicators and the horn.
The function can be turned off with the same
button once it has been active for at least
5 seconds. Otherwise the function switches
off automatically after approx. 3 minutes.
Related information
Remote control key (p. 164)
Remote control key with PCC* - unique
functions (p. 169)
Locking/unlocking - from the outside
(p. 180)
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
169
Remote control key - range
Remote control key functions (in its basic ver-
sion) have a range of approx. 20 metres from
the car.
If the car does not verify a button being
pressed - move closer and try again.
NOTE
The remote control key functions may be
disrupted by surrounding radio waves,
buildings, topographical conditions, etc.
The car can always be locked/unlocked
with the key blade (p. 172).
If the remote control key is removed from the
car when the engine is running or key position
I or II (p. 78) is active, and if all doors are
closed, then a warning message is shown in
the information display in the combined
instrument panel and an audio reminder sig-
nal sounds at the same time.
The message is extinguished and the audible
reminder signal stops when the remote con-
trol key is brought back to the car after
either/or:
The remote control key has been inserted
in the ignition switch.
Speed exceeds 30 km/h.
The OK button has been pressed.
Related information
Remote control key (p. 164)
Remote control key - functions (p. 167)
Remote control key with PCC* -
unique functions
A remote control key with PCC has enhanced
functionality compared with a remote control
key in basic version (p. 164) in the form of an
information button and indicator lamps.
Remote control key with PCC.
Information button
Indicator lamps
Using the information button enables access
to certain information from the car via the
indicator lamps.
||
06 Locks and alarm
06
170
* Option/accessory, for more information, see Introduction.
Using the information button
Press the information button .
> All indicator lamps flash for approxi-
mately 7 seconds and the light travels
around on the remote control key. This
indicates that information from the car
is being scanned.
If any of the other buttons are pressed
during this time then the reading is
interrupted.
NOTE
If none of the indicator lamps illumi-
nates with repeated use of the information
button and in different locations (as well as
after 7 seconds and after the light has
travelled around on the PCC), contact a
workshop - an authorised Volvo workshop
is recommended.
Indicator lamps display information in accord-
ance with the following illustration:
Green continuous light – the car is
locked.
Yellow continuous light – the car is
unlocked.
Red continuous light – the alarm has
been triggered since the car was locked.
Red light flashing alternately in both indi-
cator lamps – The alarm was triggered
less than 5 minutes ago.
Related information
Remote control key with PCC* - range
(p. 170)
Remote control key with PCC* - range
The range of a remote control key with PCC
(Personal Car Communicator) for locking,
unlocking the doors and tailgate is approx. 20
metres from the car - the other functions are
up to approx. 100 metres.
If the car does not verify a button being
pressed - move closer and try again.
NOTE
The information button function may be
disrupted by surrounding radio waves,
buildings, topographical conditions, etc.
Outside the remote control key's range
If the remote control key is too far away from
the car for the information to be read then the
status the car was last left in is shown, with-
out the light in the indicator lamps travelling
around on the remote control key.
If several remote control keys are used for the
car then it is only the one last used for lock-
ing/unlocking that shows the correct status.
NOTE
If no indicator lamps illuminate when
the information button is used within range
then this may be because the last commu-
nication between the remote control key
and the car was disrupted by surrounding
radio waves, buildings, topographical con-
ditions, etc.
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
171
Related information
Keyless Drive* - remote control key range
(p. 175)
Remote control key - range (p. 169)
Detachable key blade
A remote control key contains a detachable
key blade of metal with which some functions
can be activated and some operations carried
out.
The key blade's unique code is provided by
authorised Volvo workshops, which are rec-
ommended when ordering new key blades.
Key blade functions
Using the remote control key's detachable
key blade:
the driver's door can be opened manually
if central locking cannot be activated with
the remote control key, see Detachable
key blade - unlocking doors (p. 172).
the rear doors' mechanical child safety
locks can be activated/deactivated
(p. 185).
access to the glovebox and cargo area
(privacy locking (p. 172)*) can be
blocked.
the airbag for front passenger seat
(PACOS*) can be activated/deactivated
(p. 32).
Related information
Remote control key - functions (p. 167)
Remote control key (p. 164)
Detachable key blade - detaching/
attaching
Detaching/attaching the detachable key blade
(p. 171) is carried out as follows:
Removing the key blade
Slide the spring-loaded catch to the side.
At the same time pull the key blade
straight out backwards.
Attaching the key blade
Carefully refit the key blade into its location in
the remote control key (p. 164).
1. Hold the remote control key with the slot
pointed up and lower the key blade into
its slot.
2. Lightly press the key blade. You should
hear a "click" when the key blade is
locked in.
06 Locks and alarm
06
173
G017870
Active locks for remote control key, without key
blade and privacy locking activated.
This means that the remote control key with-
out key blade can only be used to activate/
deactivate the alarm (p. 187), to open the
doors and to drive the car.
The remote control key without key blade can
then be handed over to the service or hotel
staff - the loose key blade is retained by the
car owner.
NOTE
Do not forget to pull out the cargo cover
(p. 162)) over the cargo area before closing
the tailgate.
Activate/deactivate
Activating privacy locking.
To activate privacy locking:
Insert the key blade in the glovebox lock
cylinder.
Turn the key blade 180 degrees clock-
wise.
Pull out the key blade. The combined
instrument panel's information display
shows a message at the same time.
The glovebox is then locked and the tailgate
can no longer be unlocked with the remote
control key or the central locking button.
NOTE
Do not reinsert the key blade into the
remote control key, but keep it in a safe
place instead.
Deactivation takes place in reverse order.
For information on locking the glovebox only,
see Locking/unlocking - glovebox (p. 181).
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
175
Battery type
Use batteries with the designation
CR2430, 3V - one in the remote control key,
two in the remote control key with PCC.
NOTE
Volvo recommends that the batteries to be
used in the remote control key/PCC fulfil
UN Manual of Test and Criteria, Part III,
sub-section 38.3. Batteries fitted in the
factory or replaced by an authorised Volvo
workshop fulfil the above criteria.
Assembly
1. Press the remote control key together.
2. Hold the remote control key with the slot
pointed up and lower the key blade into
its slot.
3. Lightly press the key blade. You should
hear a "click" when the key blade is
locked in.
IMPORTANT
Make sure that exhausted batteries are
disposed of in a manner which is kind to
the environment.
Related information
Remote control key (p. 164)
Remote control key - functions (p. 167)
Keyless drive*
Cars equipped with Keyless Drive have a star-
ting and locking system that can be operated
keylessly.
With the keyless starting and locking system
the car can be started, locked and unlocked
without the remote control key (p. 164)
6
inserted in the ignition switch. It is enough to
have the remote control key with you in a
pocket. The system makes it easier and more
convenient to e.g. open the car when your
hands are full.
Both of the remote control keys included with
the car have Keyless functionality. It is possi-
ble to order more remote control keys.
The car's electrical system can be set to
three different levels - key position 0, I and II
(p. 78) - with the remote control key.
Related information
Keyless Drive* - remote control key range
(p. 175)
Keyless drive* - secure handling of the
remote control key (p. 176)
Keyless drive* - interference to remote
control key function (p. 177)
Keyless Drive* - remote control key
range
In order to unlock the doors or tailgate auto-
matically without pressing a button on the
6
Only applies to Remote Control Key with PCC.
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
183
Related information
Locking/unlocking - from the inside
(p. 180)
Locking/unlocking - from the outside
(p. 180)
Power operated tailgate*
The car's tailgate can be opened using a but-
ton on the lighting panel, with the rubberised
pressure plate under the outside handle or
with the remote control key. Closing takes
place using the close button at the bottom of
the tailgate.
G017876
Close button
NOTE
Consider the roof height when using elec-
trical operation. Do not use electrical oper-
ation of the tailgate under a low roof
height, see under the heading "Interrupt
opening/closing of tailgate".
NOTE
If the system has been operating con-
tinuously for a long time, it is switched
off to avoid overload. It can be used
again after about 2 minutes.
If the battery has been discharged or
disconnected then the tailgate must be
opened and closed again to reset the
system.
Programmable max. opening
Tailgate maximum opening position can be
programmed. Can be used for e.g. low roof
height in a garage. Proceed as follows:
Open the tailgate manually, hold it in the
desired position and give the button on
the tailgate one long press (at least 3 sec-
onds) and then release the tailgate - the
programming is complete.
To delete the programming - move the
tailgate manually to a higher position and
give the button on the tailgate one long
press (at least 3 seconds) and then
release the tailgate - the programming is
complete.
Pinch protection
If something with sufficient resistance pre-
vents the tailgate from opening/closing then
the pinch protection is activated.
06 Locks and alarm
06
}}
* Option/accessory, for more information, see Introduction.
185
Temporary deactivation
Active menu options are indicated with a cross.
MY CAR
OK MENU
TUNE knob control
EXIT
If someone is going to stay in the car but the
doors must be locked from the outside, then
the deadlocks function can be temporarily
switched off. This takes place the menu sys-
tem MY CAR. For a description of the menu
system, see MY CAR (p. 113).
NOTE
Remember that the alarm is activated
when the car is locked.
If any of the doors are opened from
the inside then the alarm is triggered.
Related information
Keyless drive* - unlocking with the key
blade (p. 178)
Remote control key (p. 164)
Child safety locks - manual activation
The child safety locks prevent children from
being able to open a rear door from the
inside.
Activate/deactivate child safety locks
G021077
The child safety locks are located on the trail-
ing edge of the rear doors and are only
accessible when the doors are open.
To activate/deactivate the child safety locks:
Use the remote control key's detachable
key blade (p. 171) to turn the knob.
The door is blocked against opening from
the inside.
The door can be opened from both the
outside and the inside.
06 Locks and alarm
06
* Option/accessory, for more information, see Introduction.
187
Alarm
The alarm is a device that warns in the event
of e.g. a break-in in the car.
Activated alarm is triggered if:
a door, the bonnet or the tailgate is
opened
a movement is detected in the passenger
compartment (if fitted with a movement
detector*)
the car is raised or towed away (if fitted
with a tilt detector*)
the battery's cable is disconnected
the siren is disconnected.
If there is a fault in the alarm system then the
information display in the combined instru-
ment panel shows a message. In which case,
contact a workshop - an authorised Volvo
workshop is recommended.
NOTE
The movement sensors trigger an alarm in
the event of movement in the passenger
compartment - air currents are also regis-
tered. For this reason the alarm is trig-
gered if the car is left with a window or the
sunroof open or if the passenger compart-
ment heater is used.
To avoid this: Close the window/sunroof
when leaving the car. If the car's inte-
grated passenger compartment heater (or
a portable electric heater) shall be used -
direct the airflow from the air vents so that
they are not pointing upwards in the pas-
senger compartment. Alternatively,
reduced alarm level can be used, see
Reduced alarm level (p. 189).
NOTE
Do not attempt to repair or alter compo-
nents in the alarm system yourself. Any
such attempts may affect the terms of the
insurance.
Arming the alarm
Press the remote control key lock button.
Deactivate the alarm
Press the remote control key unlock but-
ton.
Deactivating a triggered alarm
Press the remote control key unlock but-
ton or insert the remote control key in the
ignition switch.
Related information
Alarm indicator (p. 188)
Alarm - automatic re-arming (p. 188)
Alarm - remote control key not working
(p. 188)
06 Locks and alarm
06
188
Alarm indicator
The alarm indicator shows alarm system
(p. 187) status.
A red LED on the instrument panel indicates
the alarm system's status:
LED not lit – Alarm not armed
The LED flashes once every other second
– Alarm is armed
The LED flashes rapidly after disarming
the alarm (and until the remote control
key is inserted in the ignition switch and
key position I is selected) – Alarm has
been triggered.
Alarm - automatic re-arming
Automatic re-arming of the alarm (p. 187) pre-
vents the car being left with the alarm dis-
armed unintentionally.
If the car is unlocked with the remote control
key (and the alarm is disarmed) but none of
the doors or the tailgate is opened within 2
minutes, then the alarm is automatically re-
armed. The car is relocked at the same time.
Related information
Reduced alarm level (p. 189)
Alarm - remote control key not
working
If the alarm (p. 187) cannot be deactivated
with the remote control key, e.g. if the key's
battery (p. 174) is discharged - the car can be
unlocked, disarmed and the engine started as
follows:
1. Open the driver's door with the detacha-
ble key blade (p. 178).
> The alarm is triggered, the alarm indi-
cator (p. 188) flashes rapidly and the
siren sounds.
2. Insert the remote control key in the igni-
tion switch.
> The alarm is deactivated and the alarm
indicator goes out.
3. Start the engine.
06 Locks and alarm
06
}}
189
Alarm signals
When the alarm (p. 187) is triggered a siren
sounds and all direction indicators flash.
A siren sounds for 30 seconds or until the
alarm is switched off. The siren has its
own battery and works independently of
the car battery.
The direction indicators flash for 5
minutes or until the alarm is switched off.
Reduced alarm level
Reduced guard means that the movement
and tilt detectors can be temporarily deacti-
vated.
To avoid accidental triggering of the alarm
(p. 187) - e.g. if a dog is left in a locked car or
during transport on a car train or car ferry -
temporarily deactivate the movement and tilt
detectors.
The procedure is the same as with the tem-
porary disengaging of deadlocks (p. 184)
9
.
Related information
Alarm indicator (p. 188)
Type approval - remote control key
system
Type approval for the remote control key sys-
tem can be read in the table.
Lock system, standard
Country/Area
EU, China
Keyless lock system (Keyless drive)
Country/Area
EU
Korea
9
Only in combination with alarm.
07 Driver support
07
193
Spin Control
The function prevents the driving wheels from
spinning against the road surface during
acceleration.
Traction control system
The function is active at low speed and trans-
fers power from the driving wheel that is spin-
ning to the one that is not.
Related information
Electronic stability control (ESC) - opera-
tion (p. 193)
Electronic stability control (ESC) - sym-
bols and messages (p. 194)
Electronic stability control (ESC) -
operation
Selection of level - Sport mode
The ESC system is always activated - it can-
not be deactivated.
However, the driver can
select the Sport mode,
which allows for a more
active driving experience.
Sport mode is selected in
the menu system MY CAR.
For a description of the menu system, see
MY CAR (p. 113).
In Sport mode the system detects whether
the accelerator pedal, steering wheel move-
ments and cornering are more active than in
normal driving and then allows controlled
skidding with the rear section up to a certain
level before it intervenes and stabilises the
car.
If, for example, the driver stops a controlled
skid by releasing the accelerator pedal, then
the ESC system intervenes and stabilises the
car.
With Sport mode, maximum traction is also
obtained if the car has become stuck, or
when driving on a loose surface - e.g. sand or
deep snow.
Sport mode is indicated in the com-
bined instrument panel by means of
this symbol illuminating with a con-
stant glow until the driver deselects
the function or until the engine is switched off
- after the next time the engine is started the
ESC system is back in its normal mode again.
Related information
Electronic stability control (ESC) - general
(p. 192)
Electronic stability control (ESC) - sym-
bols and messages (p. 194)
07 Driver support
07
194
Electronic stability control (ESC) -
symbols and messages
Table
Symbol Message Specification
ESC Temporarily OFF
ESC system has been temporarily reduced due to excessive brake disc temperature - the function is
reactivated automatically when the brakes have cooled.
ESC Service required
ESC system disengaged.
Stop the car in a safe place, switch off the engine and start it again.
Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
and
"Message"
There is a text message in the combined instrument panel (p. 63) - Read it!
Constant glow for
2 seconds.
System check when the engine is started.
Flashing light. ESC system is being activated.
Constant glow. Sport mode is activated.
NOTE: The ESC system is not deactivated in this mode - it is partially reduced.
07 Driver support
07
195
Related information
Electronic stability control (ESC) - general
(p. 192)
Electronic stability control (ESC) - opera-
tion (p. 193)
07 Driver support
07
}}
197
End of restriction or motorway
A corresponding road sign is shown in the
combined instrument panel for
approx. 10 seconds in situations where RSI
detects a sign that involves the end of a
speed limit - or other speed-related informa-
tion, e.g. end of a motorway.
Examples of such signs are:
End of all restrictions.
End of motorway.
Following which, the sign information is hid-
den until the next speed-related sign is
detected.
Additional signs
Examples of additional signs
2
.
Sometimes different speed limits are signpos-
ted for the same road - an additional sign
then indicates the circumstances under which
the different speeds apply. The road section
may be particularly susceptible to accidents
in rain and/or fog, for example.
An additional sign relating to rain is displayed
only if the windscreen wipers are in use.
The speed applicable on an
exit is indicated in certain
markets by means of an
additional sign containing an
arrow.
Speed signs linked to this
type of additional sign are displayed only if
the driver is using the direction indicator.
Some speeds are applicable only after e.g. a
specific distance or at a certain time of day.
The driver's attention is drawn to the situation
by means of a symbol for an additional sign
under the symbol showing speed.
Display of additional information
A symbol for additional sign in the form of an
empty frame under the combined instrument
panel's speed symbol means that the RSI has
detected an additional sign with supplemen-
tary information for the current speed limit.
Setting in MY CAR
There are options for RSI in the MY CAR
menu system; see MY CAR (p. 113).
2
Road signs shown in the combined instrument panel are market-dependent - the illustrations in these instructions only show a few examples.
||
07 Driver support
07
198
* Option/accessory, for more information, see Introduction.
Road sign information On/Off
The combined instrument panel's speed sym-
bol display can be disabled. The function can
be activated/deactivated in the menu system
MY CAR. For a description of the menu sys-
tem, see MY CAR (p. 113).
Speed warning
The driver can opt to receive a warning when
the applicable speed limit is exceeded by
5 km/h or more. This warning is given by the
symbol showing the applicable maximum
speed temporarily flashing when this speed is
exceeded. The function can be activated/
deactivated in the menu system MY CAR. For
a description of the menu system, see MY
CAR (p. 113).
Related information
Road Sign Information (RSI)* (p. 196)
Road sign information (RSI)* - limitations
(p. 198)
MY CAR (p. 113)
Road sign information (RSI)* -
limitations
The road sign information function (RSI –
Road Sign Information) helps the driver to
remember which speed-related road signs the
car has passed. The function has the follow-
ing limitations.
The RSI function's camera sensor has limita-
tions just like the human eye - read more
about camera sensor limitations (p. 232)).
Signs which indirectly provide information on
a prevailing speed limit, e.g. name signs for
towns/districts, are not recorded by the RSI
function.
Here are several examples of what can dis-
rupt the function:
Faded signs
Signs positioned on bends
Rotated or damaged signs
Concealed or poorly positioned signs
Signs completely or partly covered with
frost, snow and/or dirt.
Related information
Road Sign Information (RSI)* (p. 196)
Road sign information (RSI)* - operation
(p. 196)
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
199
Cruise control*
The cruise control (CC – Cruise Control) helps
the driver maintain an even speed, resulting in
a more relaxed driving on motorways and
long, straight roads in regular traffic flows.
Overview
Steering wheel keypad and combined instrument
panel.
Cruise control - On/Off.
Standby mode ceases and the stored
speed is resumed.
Standby mode
Activate and adjust the speed.
Selected speed (GREY = Standby mode).
Cruise control active - WHITE symbol
(GREY = Standby mode).
WARNING
The driver must always be observant with
regard to the traffic conditions and inter-
vene when the cruise control is not main-
taining a suitable speed and/or suitable
distance.
The driver always bears ultimate responsi-
bility for ensuring that the vehicle is driven
safely.
Related information
Cruise control* - managing speed
(p. 199)
Cruise control* temporary deactivation
and standby mode (p. 200)
Cruise control* - resume set speed
(p. 201)
Cruise control* - deactivate (p. 201)
Adaptive cruise control - ACC* (p. 201)
Cruise control* - managing speed
It is possible to activate, set and change the
stored speed.
Activating and setting the speed
To enable cruise control:
Press the steering wheel button for
CRUISE (without speed limiter) or
(with speed limiter).
> The cruise control symbol (6) in the com-
bined instrument panel illuminates -
cruise control is in standby mode.
To activate cruise control:
At the required speed - press the steering
wheel button
or .
> The current speed is stored in memory
and the combined instrument panel's
marking (5) illuminates at the selected
speed and the symbol (6) changes from
GREY to WHITE - the car then follows the
stored speed.
NOTE
Cruise Control cannot be enabled at
speeds below 30 km/h.
Changing the stored speed
Stored speed is changed with short or long
presses on the or button.
To adjust +/- 5 km/h:
||
07 Driver support
07
200
* Option/accessory, for more information, see Introduction.
Use short presses - each press gives
+/- 5 km/h.
To adjust +/- 1 km/h:
Hold the button depressed and release
when the combined instrument panel's
mark is by the desired speed.
Last press made is stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
/ button,
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
NOTE
If any of the Cruise Control buttons are
held depressed for several minutes then it
is blocked and deactivated. To be able to
reactivate Cruise Control, the car must be
stopped and the engine restarted.
Related information
Cruise control* (p. 199)
Cruise control* temporary
deactivation and standby mode
The function can be temporarily deactivated
and set in standby mode.
Temporary deactivation - standby mode
To temporarily disengage cruise control and
set it in standby mode:
Press the steering wheel button
.
> The combined instrument panel's
marking (5) and symbol (6) change colour
from WHITE to GREY - cruise control is
temporarily disengaged.
Standby mode due to driver intervention
Cruise control is temporarily disengaged and
automatically set in standby mode if:
the foot brake is used
the clutch pedal is depressed
the gear lever/selector is moved to N
position
the driver maintains speed higher than
the stored speed for longer than
1 minute.
The driver must then regulate the speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
Automatic standby mode
Cruise control is temporarily disengaged and
set in standby mode if:
wheels lose traction
engine speed is too low/high
speed falls below approx. 30 km/h.
The driver must then regulate the speed.
Related information
Cruise control* (p. 199)
Cruise control* - managing speed (p. 199)
Cruise control* - resume set speed
(p. 201)
Cruise control* - deactivate (p. 201)
||
07 Driver support
07
204
* Option/accessory, for more information, see Introduction.
WARNING
The adaptive cruise control only warns of
vehicles which its radar sensor has
detected - hence a warning may not be
given, or it may be given with a certain
delay. Do not wait for a warning without
braking when so required.
Steep roads and/or heavy load
Bear in mind that the adaptive cruise control
is primarily intended for use when driving on
level road surfaces. It may have difficulty in
keeping the correct distance from the vehicle
ahead when driving on steep downhill slopes,
with a heavy load or with a trailer - in which
case, be extra attentive and ready to slow
down.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - deactivate
(p. 208)
Adaptive cruise control* - overtaking
another vehicle (p. 207)
Adaptive cruise control* - overview
Standby mode ceases and the stored
speed is resumed.
Cruise control - On/Off or Standby mode.
Time interval - Increase/decrease.
Activate and adjust the speed.
(Not used)
Green marking at stored speed (WHITE =
standby mode).
Time distance
ACC is active at the GREEN symbol
(WHITE = standby mode).
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - function
(p. 202)
Adaptive cruise control* - symbols and
messages (p. 214)
07 Driver support
07
* Option/accessory, for more information, see Introduction.
205
Adaptive cruise control* - managing
speed
To enable ACC:
Press the steering wheel button
- a
similar WHITE symbol illuminates in the
combined instrument panel (8) which
shows that the adaptive cruise control is
in standby mode (p. 206).
To activate ACC:
At the required speed - press the steering
wheel button
or .
> The current speed is stored in the mem-
ory, the combined instrument panel
shows a "magnifying glass" (6) around
the stored speed for a second or so and
its marking changes from WHITE to
GREEN.
When this symbol changes colour
from WHITE to GREEN, the ACC is
active and the car maintains the
stored speed.
Only when the symbol shows
an image of another vehicle
is the distance to the vehicle
in front controlled by the
ACC.
At the same time a speed
range is marked:
the higher speed with GREEN marking is
the pre-programmed speed
the lower speed is the speed of the vehi-
cle in front.
Changing the stored speed
Stored speed is changed with short or long
presses on the
or button.
To adjust +/- 5 km/h:
Use short presses - each press gives
+/- 5 km/h.
To adjust +/- 1 km/h:
Hold the button depressed and release
when the combined instrument panel's
mark is by the desired speed.
Last press made is stored in the memory.
If speed is increased using the accelerator
pedal prior to pressing the
/ button,
then it is the car's current speed when the
button is pressed that is stored.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
stored speed when the accelerator pedal is
released.
NOTE
If any of the adaptive cruise control but-
tons are held depressed for several
minutes then the function is blocked and
deactivated. To be able to reactivate it, the
car must be stopped and the engine
restarted.
In certain situations it cannot be reactiva-
ted - in which case, the combined instru-
ment panel (p. 214) shows
Adaptive
cruise control unavailable.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
07 Driver support
07
206
* Option/accessory, for more information, see Introduction.
Adaptive cruise control* - set time
interval
Different time intervals to the
vehicle in front can be
selected and shown in the
combined instrument panel
as 1-5 horizontal lines - the
more lines the longer the
time interval. One line corre-
sponds to approximately 1 second to the
vehicle in front, 5 lines approximately
3 seconds.
To set/change the time distance:
Increase or decrease with the steering
wheel buttons
/ .
At low speed, when the distances are short,
the adaptive cruise control increases the time
interval slightly.
The adaptive cruise control allows the time
interval to vary noticeably in certain situations
in order to allow the car to follow the vehicle
in front smoothly and comfortably.
Note that a short time interval only allows the
driver a short time to react and take action if
any unforeseen traffic problem should arise.
The same symbol is also shown when Dis-
tance Warning (p. 216) function is activated.
NOTE
Only use the time intervals permitted by
local traffic regulations.
If the adaptive cruise control does not
appear to react when activated, this may
be because the time distance to the vehi-
cle in front is preventing an increase in
speed.
The higher the speed the longer the calcu-
lated distance in metres for a given time
interval.
Read more how speed is handled (p. 205).
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
Adaptive cruise control* - deactivate
(p. 208)
Adaptive cruise control* - temporary
deactivation, and standby mode
The adaptive cruise control can be temporar-
ily deactivated and set in standby mode.
Temporary deactivation/standby mode
To temporarily disengage the adaptive cruise
control and set it in standby mode:
Press the steering wheel button
This symbol and the stored speed's
marking then change colour from
GREEN to WHITE.
Standby mode due to driver intervention
The adaptive cruise control is temporarily dis-
engaged and set automatically in standby
mode if:
the foot brake is used
the clutch pedal is depressed for longer
than 1 minute
6
the gear selector is moved to N position
(automatic gearbox)
the driver maintains speed higher than
the stored speed for longer than
1 minute.
The driver must then regulate the speed.
A temporary increase in speed with the accel-
erator pedal, e.g. during overtaking, does not
affect the setting - the car returns to the last
6
Disengaging and selecting a higher or lower gear does not involve standby mode.
07 Driver support
07
* Option/accessory, for more information, see Introduction.
207
stored speed when the accelerator pedal is
released.
Automatic standby mode
The adaptive cruise control is dependent on
other systems, e.g. Stability system ESC
(p. 192). If any of these systems stops work-
ing, the adaptive cruise control is deactivated
automatically.
In the event of automatic deactivation a signal
will sound and the message
Adaptive cruise
control cancelled is shown in the combined
instrument panel. The driver must then inter-
vene and adapt the speed and distance to
the vehicle ahead.
An automatic deactivation can be due to:
the driver opens the door
the driver takes off his seatbelt
engine speed is too low/high
speed has fallen below 30 km/h
7
wheels lose traction
brake temperature is high
the radar sensor is covered e.g. by wet
snow or heavy rain (radar waves blocked).
Resume set speed
Adaptive cruise control in standby mode is
reactivated with one press on the steering
wheel button
- the speed is then set to the
last stored speed.
NOTE
A pronounced increase in speed may
occur after the cruise control has been
reactivated with the
button.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Cruise control* (p. 199)
Adaptive cruise control* - overtaking
another vehicle
When the car is following another vehicle and
the driver indicates an impending overtaking
manoeuvre with the direction indicator
8
, the
adaptive cruise control helps to briefly accel-
erate the car towards the vehicle in front.
This function is active at speeds
above 70 km/h.
WARNING
Be aware that this function can be acti-
vated in more situations other than during
overtaking, e.g. when a direction indicator
is used to indicate a change of lane or exit
to another road - the car will then acceler-
ate briefly.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
7
Does not apply to a car with Queue Assist - it can go all the way down to 0 km/h.
8
On left flash only in left-hand-drive car, or right flash in right-hand-drive car.
07 Driver support
07
208
* Option/accessory, for more information, see Introduction.
Adaptive cruise control* - deactivate
With a short press on the steering wheel but-
ton
the adaptive cruise control is set in
standby mode (p. 206). It is switched off with
an additional short press - the set/stored
speed is thus cleared and cannot then be
resumed with the
button.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - function
(p. 202)
Adaptive cruise control* - symbols and
messages (p. 214)
Adaptive Cruise Control* - queue
assistance
Queue assistance also provides the adaptive
cruise control with enhanced functionality at
speeds below 30 km/h.
In cars with automatic gearbox the adaptive
cruise control is supplemented with the
queue assistance function (also referred to as
"Queue Assist").
Queue assistance has the following functions:
Extended speed range - also below
30 km/h and when stationary
Change of target
Automatic braking ceases when station-
ary
Automatic activation parking brake.
Note that the lowest programmable speed for
the adaptive cruise control is 30 km/h - even
though it is capable of following another vehi-
cle down to a standstill, a speed lower than
30 km/h cannot be selected/stored.
Extended speed range
NOTE
In order to activate the adaptive cruise
control, the driver's door must be closed
and the driver must be wearing the seat-
belt.
With an automatic gearbox, the adaptive
cruise control can follow another vehicle
within the range 0-200 km/h.
NOTE
A vehicle in front must be within a reason-
able distance in order to enable activation
of the adaptive cruise control at a speed
lower than 30 km/h.
For shorter stops in connection with inching
in slow traffic or at traffic lights driving is
automatically resumed if the stops do not
exceed about 3 seconds - if it takes longer
before the car in front starts moving again
then the Adaptive cruise control is set in
standby mode with automatic braking. The
driver must then reactivate it in one of the fol-
lowing ways:
Press the steering wheel button
.
or
Depress the accelerator pedal.
> The adaptive cruise control will then
resume following the vehicle in front.
07 Driver support
07
* Option/accessory, for more information, see Introduction.
209
NOTE
Queue Assist can hold the car stationary
for a maximum of 4 minutes - then the
parking brake is applied and the adaptive
cruise control is disengaged.
The parking brake must be released
before the adaptive cruise control can
be reactivated.
Change of target
If the target vehicle in front suddenly turns then
there may be stationary traffic in front.
When the adaptive cruise control is following
another vehicle at speeds below 30 km/h and
changes target from a moving to a stationary
vehicle, the adaptive cruise control will slow
down for the stationary vehicle.
WARNING
When the adaptive cruise control is follow-
ing another vehicle at speeds in excess of
30 km/h and the target is changed from a
moving vehicle to a stationary vehicle, the
adaptive cruise control will ignore the sta-
tionary vehicle and instead select the
stored speed.
The driver must intervene him/herself
and brake.
Automatic standby mode with change
of target
The adaptive cruise control is disengaged
and set in standby mode:
when the speed is below 5 km/h and the
adaptive cruise control is uncertain
whether the target object is a stationary
vehicle or some other object, e.g. a speed
bump.
when the speed is below 5 km/h and the
vehicle in front turns off so the adaptive
cruise control no longer has a vehicle to
follow.
Termination of automatic braking at a
standstill
In certain situations, queue assistance stops
automatic braking at a standstill. This means
that the brakes are released and the car may
start to roll - the driver must therefore inter-
vene and brake the car himself/herself in
order to maintain its position.
Queue assistance releases the foot brake and
sets the adaptive cruise control in standby
mode in the following situations:
the driver puts his/her foot on the brake
pedal
the parking brake is applied
the gear selector is moved to P, N or R
position
the driver sets the adaptive cruise control
in standby mode.
Automatic activation parking brake
In certain situations queue assistance applies
the parking brake in order to keep the car
remaining stationary.
This takes place if:
the driver opens the door or takes off
his/her seatbelt
ESC is changed from Normal to Sport
mode
Queue assistance has held the car sta-
tionary for more than 4 minutes
the engine is switched off
the brakes have overheated.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
07 Driver support
07
210
* Option/accessory, for more information, see Introduction.
Adaptive cruise control* - switch
cruise control functionality
Changing from ACC to CC
A symbol for active cruise control is shown in
the combined instrument panel:
CC
Cruise Control
ACC
Adaptive Cruise
Control
Cruise control Adaptive cruise control
With one press of the button the adaptive
part (spacing system) in the cruise control is
deactivated, at which point the car just fol-
lows the set/stored speed.
Give a long press on the steering wheel
button
- the combined instrument
panel's symbol changes from
to .
> By these means the standard cruise con-
trol (p. 199) CC (Cruise
Control) is activated.
WARNING
The car no longer brakes automatically
after switching from ACC to CC - it merely
follows the set speed.
Changing back from CC to ACC
Switch off cruise control with 1-2 presses on
the
button in accordance with the deacti-
vation instructions (p. 208). The next time the
system is switched on it is the Adaptive
cruise control that is activated.
Related information
Adaptive cruise control - ACC* (p. 201)
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
Radar sensor
The function of the radar sensor is to detect
cars or larger vehicles in the same direction,
in the same lane.
The radar sensor is used by the following
functions:
Distance Warning*
Adaptive cruise control*
Collision Warning with Auto Brake and
Pedestrian Detection*
IMPORTANT
In the event of visible damage to the car's
grille, or if you suspect that the radar sen-
sor may be damaged:
Contact a workshop - an authorised
Volvo workshop is recommended.
The function may completely or partially
disappear - or malfunction - if the grille,
the radar sensor or its bracket is damaged
or has loosened.
Modification of the radar sensor could result
in it being illegal to use.
Related information
Radar sensor - limitations (p. 211)
Adaptive cruise control - ACC* (p. 201)
Collision warning system* (p. 226)
Distance Warning* (p. 216)
||
07 Driver support
07
212
* Option/accessory, for more information, see Introduction.
WARNING
Adaptive cruise control is not a collision
avoidance system. The driver must inter-
vene if the system does not detect a vehi-
cle in front.
The adaptive cruise control does not brake
for humans or animals, and not for small
vehicles such as bicycles and motorcy-
cles. Nor for oncoming, slow or stationary
vehicles and objects.
Do not use the adaptive cruise control, for
example, in city traffic, in dense traffic, at
junctions, on slippery surfaces, with a lot
of water or slush on the road, in heavy
rain/snow, in poor visibility, on winding
roads or on slip roads.
Related information
Adaptive cruise control - ACC* (p. 201)
Collision warning system* (p. 226)
Distance Warning* (p. 216)
07 Driver support
07
* Option/accessory, for more information, see Introduction.
213
Adaptive cruise control* - fault tracing
and action
If the combined instrument panel shows the
message
Radar blocked See manual then it
means that the adaptive cruise control's radar
sensor (p. 210) cannot detect other vehicles
in front of the car.
This message indicates that neither of the
functions for Distance Alert (p. 216) or Colli-
sion Warning with Auto Brake (p. 226) are
working.
The following table presents examples of
possible causes for a message being shown
along with the appropriate action:
Cause Action
The radar surface in the grille is dirty or covered with ice or snow. Clean the radar surface in the grille from dirt, ice and snow.
Heavy rain or snow blocking the radar signals. No action. Sometimes the radar does not work during heavy rain or snowfall.
Water or snow from the road surface swirls up and blocks the
radar signals.
No action. Sometimes the radar does not work on a very wet or snowy road
surface.
The radar surface has been cleaned but the message remains. Wait. It could take several minutes for the radar to sense that it is no longer
blocked.
Related information
Adaptive cruise control* - overview
(p. 204)
Adaptive cruise control* - function
(p. 202)
Adaptive cruise control* - symbols and
messages (p. 214)
||
07 Driver support
07
222
NOTE
Keep the windscreen surface in front
of the laser sensor free from ice, snow
and dirt (see the illustration for sensor
location (p. 219)).
Do not affix or mount anything on the
windscreen in front of the laser sensor.
Remove ice and snow from the bonnet
- snow and ice must not exceed a
height of 5 cm.
Fault tracing and action
If the message Windscreen sensors
blocked See manual is shown in the com-
bined instrument panel it indicates that the
laser sensor is blocked and cannot detect
vehicles in front of the car. This means in turn
that City Safety™ is not operational.
The
Windscreen sensors blocked See
manual message is not shown for all situa-
tions in which the laser sensor is blocked.
The driver must therefore be diligent about
keeping the windscreen and area in front of
the laser sensor clean.
The following table presents possible causes
for the message being shown, along with
suggestions for appropriate action.
Cause Action
The windscreen sur-
face in front of the
laser sensor is dirty or
covered with ice or
snow.
Clean the wind-
screen surface in
front of the sensor
from dirt, ice and
snow.
The laser sensor field
of vision is blocked.
Remove the
blocking object.
IMPORTANT
If there are cracks, scratches or stone
chips in the windscreen in front of either of
the laser sensor's "windows" and they
cover a surface of approx. 0.5 x 3.0 mm
(or larger), then a workshop must be con-
tacted for replacement of the windscreen
(see the illustration for sensor location
(p. 219)) - an authorised Volvo workshop is
recommended.
Failure to take action may result in
reduced performance for City Safety™.
To avoid the risk of failed, deficient or
reduced operation for City Safety™, the
following also applies:
Volvo recommends that you do not
repair cracks, scratches or stone chips
in the area in front of the laser sensor -
instead, the whole windscreen should
be replaced.
Before replacing a windscreen, con-
tact an authorised Volvo workshop to
verify that the correct windscreen is
ordered and fitted.
The same type or Volvo-approved
windscreen wipers must be fitted dur-
ing replacement.
Related information
City Safety™ (p. 219)
City Safety™ - function (p. 219)
City Safety™ - operation (p. 220)
07 Driver support
07
225
City Safety™ - symbols and
messages
In conjunction with automatic braking by the
City Safety™ (p. 219) system, one or more
symbols may illuminate in the combined
instrument panel and a text message may be
shown. A text message can be acknowledged
by briefly pressing the OK button on the
direction indicator stalk.
Symbol Message Meaning/Action
Auto braking by City Safety
City Safety™ is braking or has automatically braked.
Windscreen sensors blocked
See manual
The laser sensor is temporarily non-operational because something is blocking it.
Remove the object blocking the sensor and/or clean the windscreen in front of the sensor.
Read about laser sensor limitations (p. 221).
City Safety Service required
City Safety™ is not operational.
Visit a workshop if the message remains - an authorised Volvo workshop is recommended.
Related information
City Safety™ (p. 219)
City Safety™ - limitations (p. 221)
City Safety™ - function (p. 219)
City Safety™ - operation (p. 220)
City Safety™ - laser sensor (p. 223)
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
231
NOTE
Even if the warning distance has been set
to
Long warnings could be perceived as
being late in certain situations, e.g. when
there are large differences in speed or if
vehicles in front brake heavily.
WARNING
No automatic system can guarantee
100 % correct function in all situations.
Therefore, never test Collision Warning
with Auto Brake by driving at people or
vehicles - this may cause severe damage
and injury and risk lives.
Checking settings
The current settings can be controlled via the
centre console's screen and the menu sys-
tem (p. 113) MY CAR.
Maintenance
Camera and radar sensor
24
.
For the sensors to work correctly, they must
be kept clear of dirt, ice and snow, and be
cleaned regularly with water and car sham-
poo.
NOTE
Dirt, ice and snow covering the sensors
will reduce their function and may prevent
measurement.
Related information
Collision warning system* (p. 226)
Collision warning system* - limitations
The function has certain limitations - for
example, it is not active until approx. 4 km/h.
The collision warning system's visual warning
signal (see (1) in the illustration (p. 227)) may
be difficult to notice in the event of strong
sunlight, reflections, when sunglasses are
being worn or if the driver is not looking
straight ahead. The warning sound should
therefore always be activated.
On slippery road surfaces the braking dis-
tance is extended, which may reduce the
capacity to avoid a collision. In such situa-
tions the ABS and ESC (p. 192) systems will
provide best possible braking force with
maintained stability.
NOTE
The visual warning signal can be temporar-
ily disengaged in the event of high passen-
ger compartment temperature caused by
strong sunlight for example. If this occurs
then the warning sound is activated even if
it is deactivated in the menu system.
Warnings may not appear if the dis-
tance to the vehicle in front is small or
if steering wheel and pedal move-
ments are large, e.g. a very active driv-
ing style.
24
NOTE: The illustration is schematic - details may vary depending on car model.
07 Driver support
07
236
* Option/accessory, for more information, see Introduction.
Driver Alert System*
30
The Driver Alert System is intended to assist
drivers whose driving ability is deteriorating or
who are inadvertently leaving the lane they are
driving on.
The Driver Alert System consists of different
functions which can either be switched on at
the same time or individually:
Driver Alert Control - DAC (p. 237).
Lane Departure Warning - LDW (p. 239).
A switched-on function is set in standby
mode and is not activated automatically until
speed exceeds 65 km/h.
The function is deactivated again when speed
decreases to below 60 km/h.
Both functions use a camera which is
dependent on the lane having side markings
painted on each side.
WARNING
Driver Alert System does not work in all
situations but is designed merely as a sup-
plementary aid.
The driver always bears ultimate responsi-
bility for ensuring that the vehicle is driven
safely.
Related information
Driver Alert Control (DAC)* (p. 236)
Lane Departure Warning (LDW)* (p. 239)
Driver Alert Control (DAC)*
The DAC function is intended to attract the
driver's attention when he/she starts to drive
less consistently, e.g. if he/she becomes dis-
tracted or starts to fall asleep.
The objective for DAC is to detect slowly
deteriorating driving ability and it is primarily
intended for major roads. The function is not
intended for city traffic.
A camera detects the side markings painted
on the carriageway and compares the section
of the road with the driver's steering wheel
movements. The driver is alerted if the vehicle
does not follow the carriageway evenly.
In some cases driving ability is not affected
despite driver fatigue. In which case there
may not be any warning issued for the driver.
30
Not available as an option for certain engines.
07 Driver support
07
* Option/accessory, for more information, see Introduction.
237
For this reason it is always important to stop
and take a break in the event of any signs of
driver fatigue, irrespective of whether or not
DAC issues a warning.
NOTE
The function must not be used to extend a
period of driving. Always plan breaks at
regular intervals, and make sure you are
well rested.
Limitation
In some cases the system may issue a warn-
ing despite driving ability not deteriorating, for
example:
in strong side winds
on rutted road surfaces.
NOTE
The camera sensor has certain limitations
(p. 232).
Related information
Driver Alert System* (p. 236)
Driver Alert Control (DAC)* - operation
(p. 237)
Driver Alert Control (DAC)* - symbols and
messages (p. 238)
Driver Alert Control (DAC)* - operation
Settings are made from the centre console
display screen and its menu system.
On/Off
The Driver Alert function can be set in
standby mode via the menu system MY CAR
(p. 113):
Checked box - function activated.
Unchecked box - the function is deacti-
vated.
Function
Driver Alert is activated when speed exceeds
65 km/h and remains active as long as the
speed is over 60 km/h.
If the vehicle is being driven errati-
cally, the driver is notified by an
acoustic signal plus the text mes-
sage
Driver Alert Time for a break
- the linked symbol is illuminated in the com-
bined instrument panel at the same time. The
warning is repeated after a time if driving abil-
ity does not improve.
The warning symbol can go off:
Press the left stalk switch OK button.
WARNING
An alarm should be taken very seriously,
as a sleepy driver is often not aware of
his/her own condition.
In the event of an alarm or a feeling of
tiredness; stop the car in a safe manner as
soon as possible and rest.
Studies have shown that it is equally as
dangerous to drive while tired as it is under
the influence of alcohol.
Related information
Driver Alert System* (p. 236)
Driver Alert Control (DAC)* (p. 236)
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
239
Lane Departure Warning (LDW)*
Lane Departure Warning is one of the func-
tions in the Driver Alert System - sometimes
also referred to as LDW (Lane Departure
Warning).
The function is intended for use on motor-
ways and similar major roads in order to
reduce the risk of the vehicle accidentally
leaving its own lane in certain situations.
Principle for LDW
(The figure is schematic - not model specific.)
LDW consists of a camera that detects the
side lines painted on the road/lane.
If the vehicle crosses the left or right-hand
side line of the carriageway without due
cause then the driver is alerted by an acoustic
signal.
NOTE
The driver is only warned once each time
the wheels cross a line. So there is no
acoustic alarm when there is a line
between the car's wheels.
WARNING
LDW is merely a driver's aid and does not
engage in all driving situations or traffic,
weather or road conditions.
The driver always bears ultimate responsi-
bility for ensuring that the vehicle is driven
safely and that applicable laws and road
traffic regulations are followed.
Related information
Driver Alert System* (p. 236)
Lane Departure Warning (LDW) - limita-
tions (p. 241)
Lane Departure Warning (LDW) - function
(p. 239)
Lane Departure Warning (LDW) - opera-
tion (p. 240)
Lane Departure Warning (LDW) - symbols
and messages (p. 242)
Lane Departure Warning (LDW) -
function
Certain settings can be made for the Lane
Departure Warning function.
Off & On
LDW is engaged or disengaged using a but-
ton on the centre console. An indicator lamp
in the button illuminates when the function is
switched on.
This function is complemented in the com-
bined instrument panel with intuitive graphics
in different situations.
Personal preferences
Settings are made from the centre console's
screen via the menu system in MY CAR. For
a description of the menu system, see MY
CAR (p. 113).
Select from the options:
||
07 Driver support
07
240
* Option/accessory, for more information, see Introduction.
On at startup - The function enters
standby mode every time the engine is
started. Otherwise the same value as
when the engine was switched off is
obtained.
Increased sensitivity - The sensitivity
increases, an alarm is triggered earlier
and fewer limitations apply.
Related information
Lane Departure Warning (LDW)* (p. 239)
Lane Departure Warning (LDW) - limita-
tions (p. 241)
Lane Departure Warning (LDW) - opera-
tion (p. 240)
Lane Departure Warning (LDW) - symbols
and messages (p. 242)
Lane Departure Warning (LDW) -
operation
LDW is complemented in the combined
instrument panel with intuitive graphics in dif-
ferent situations. Here are some examples:
The LDW function's side lines (marked in red in
the figure).
The LDW symbol has WHITE side lines -
the function is active and detects/"sees"
one side line, or both.
The LDW symbol has GREY side lines -
the function is active but detects neither
left nor right side line.
or
The LDW symbol has GREY side lines -
the function is in standby mode because
the speed is below 65 km/h.
The LDW symbol has no side lines - the
function is deactivated.
Related information
Lane Departure Warning (LDW)* (p. 239)
Lane Departure Warning (LDW) - limita-
tions (p. 241)
Lane Departure Warning (LDW) - function
(p. 239)
Lane Departure Warning (LDW) - symbols
and messages (p. 242)
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
243
Park Assist*
Parking assistance is used as an aid to park-
ing. An acoustic signal as well as symbols on
the centre console's display screen indicate
the distance to the detected obstacle.
Parking assistance sound level can be
adjusted during the ongoing acoustic signal
using the centre console's VOL knob or in the
car's menu system (p. 113) MY CAR.
Parking assistance is available in two vari-
ants:
Rear only
Both front and rear.
NOTE
When a towbar is configured with the car's
electrical system, the protrusion of the
towbar is included when the function
measures the parking space.
WARNING
Parking assistance does not relinquish
the driver's own responsibility during
parking.
The sensors have blind spots where
obstacles cannot be detected.
Be aware of e.g. people or animals
near the car.
Related information
Park assist syst* - cleaning the sensors
(p. 246)
Park assist syst* - function (p. 243)
Park assist syst* - forward (p. 245)
Park assist syst* - fault indication (p. 246)
Park assist syst* - backward (p. 244)
Park assist camera* (p. 247)
Park assist syst* - function
The parking assistance system is automati-
cally activated when the engine is started -
the switch's On/Off lamp is illuminated. If
parking assistance is switched off with the
button, the lamp goes out.
On/Off for parking assistance.
Display screen view - showing an obstacle left
front and right rear.
07 Driver support
07
246
* Option/accessory, for more information, see Introduction.
Park assist syst* - fault indication
Parking assistance is used as an aid to park-
ing. An acoustic signal as well as symbols on
the centre console's display screen indicate
the distance to the detected obstacle.
If the combined instrument panel's
information symbol illuminates with
constant glow and the text message
Park Assist System Service required is
shown then parking assistance is disen-
gaged.
IMPORTANT
In certain conditions the parking assis-
tance system may produce incorrect warn-
ing signals that are caused by external
sound sources that emit the same ultra-
sonic frequencies that the system works
with.
Examples of such sources include horns,
wet tyres on asphalt, pneumatic brakes
and exhaust noises from motorcycles etc.
Related information
Park Assist* (p. 243)
Park assist syst* - cleaning the sensors
(p. 246)
Park assist syst* - function (p. 243)
Park assist syst* - forward (p. 245)
Park assist syst* - backward (p. 244)
Park assist camera* (p. 247)
Park assist syst* - cleaning the
sensors
Parking assistance is used as an aid to park-
ing. An acoustic signal as well as symbols on
the centre console's display screen indicate
the distance to the detected obstacle.
The sensors must be cleaned regularly to
ensure that they work properly. Clean them
with water and car shampoo.
Sensor location, front.
Sensor location, rear.
NOTE
Dirt, ice and snow covering the sensors
may cause incorrect warning signals.
Related information
Park Assist* (p. 243)
Park assist syst* - function (p. 243)
Park assist syst* - forward (p. 245)
Park assist syst* - fault indication (p. 246)
Park assist syst* - backward (p. 244)
Park assist camera* (p. 247)
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
247
Park assist camera*
Parking camera is an auxiliary system, which
is activated when the reverse gear is selected.
The camera image is shown on the centre
console's screen.
NOTE
When a towbar is configured with the car's
electrical system, the protrusion of the
towbar is included when the function
measures the parking space.
WARNING
The parking camera serves as an aid.
It does not relieve the driver of respon-
sibility when reversing.
The camera has blind spots, where
obstacles cannot be detected.
Be aware of people and animals in the
vicinity of the car.
Function and operation
Camera location next to the opening handle.
The camera shows what is behind the car
and if something appears from the sides.
The camera shows a wide area behind the
car and part of the bumper and any towbar.
Objects on the screen may appear to tilt
slightly - this is normal.
NOTE
Objects on the display screen may be
closer to the car than they appear to be on
the screen.
If another view is active then the parking
camera system takes over automatically and
its camera image is displayed on the screen.
When reverse gear is selected, unbroken lines
are shown graphically which illustrate where
the car's approximate external dimensions
will be positioned with the current steering
wheel angle - this facilitates parallel parking,
reversing into tight spaces and for hitching a
trailer. The park assist lines can be deacti-
vated - see section Settings (p. 249).
If the car is also equipped with Parking assis-
tance sensors (p. 243)* then their information
is shown graphically as coloured areas in
order to illustrate distances to detected
obstacles, see heading "Cars with reversing
sensors" later in the text.
The camera is active approx. 5 seconds after
reverse gear has been disengaged or until the
car's speed exceeds 10 km/h forward or
35 km/h backward.
Light conditions
The camera image is adjusted automatically
according to prevailing light conditions.
Because of this, the image may vary slightly
in brightness and quality. Poor light condi-
tions can result in a slightly reduced image
quality.
NOTE
Keep the camera lens clear of dirt, snow
and ice to ensure optimum function. This
is particularly important in poor light.
07 Driver support
07
* Option/accessory, for more information, see Introduction.
249
Related information
Park assist camera - settings (p. 249)
Park assist camera - limitations (p. 250)
Park Assist* (p. 243)
Park assist camera - settings
Activate switched-off camera
If the camera function is switched off when
reverse gear is selected, it is activated in the
following way:
Press CAM - the screen shows the cur-
rent camera view.
Change setting
The default setting is that the camera is acti-
vated when reverse gear is selected.
The settings for the parking camera can be
changed when the screen shows a camera
view:
1. Press OK/MENU when a camera view is
shown - the screenchanges to a menu
with various options.
2. Turn to reach the desired option with
TUNE.
3. Highlight the option by pressing OK/
MENU once and go back out with EXIT.
Miscellaneous
If the car has several cameras* installed, the
active camera view on the screen can be
changed:
Press CAM or turn TUNE.
Related information
Park assist camera* (p. 247)
Park Assist* (p. 243)
07 Driver support
07
250
* Option/accessory, for more information, see Introduction.
Park assist camera - limitations
NOTE
A bike carrier or other accessory mounted
on the rear of the car could obscure the
camera's view.
To bear in mind
Pay attention to the possibility that, even if it
only looks like a relatively small part of the
image is obscured, it could be a relatively
large sector that is hidden from view. Obsta-
cles could thereby go undetected until they
are very close to the car.
Keep the camera lens free from dirt, ice
and snow.
Clean the camera lens regularly with luke-
warm water and car shampoo - take care
not to scratch the lens.
Related information
Park assist camera* (p. 247)
Park assist camera - settings (p. 249)
Park Assist* (p. 243)
BLIS*
BLIS (Blind Spot Information System) is a
camera-based information system that under
certain conditions can help the driver to
notice vehicles moving in the same direction
as the host vehicle in the so-called "blind
spot".
The system is designed to work most effec-
tively when driving in dense traffic on multi-
lane highways.
WARNING
The system is a supplement to, not a
replacement for, a safe driving style and
use of the rearview mirrors. It can never
replace the driver's attention and responsi-
bility. The responsibility for changing lanes
safely always rests with the driver.
Overview
G021426
Rearview mirror with BLIS function
36
.
BLIS camera
Indicator lamp
BLIS symbol
NOTE
The lamp illuminates on the side of the car
where the system has detected the vehi-
cle. If the car is overtaken on both sides at
the same time then both lamps illuminate.
Maintenance
In order to work most effectively the BLIS
camera lenses
37
must be clean. The lenses
can be cleaned with a soft cloth or damp
36
NOTE: The illustration is schematic - details may vary depending on car model.
37
See (1) in the preceding illustration.
07 Driver support
07
}}
* Option/accessory, for more information, see Introduction.
251
sponge. Clean the lenses carefully so that
they are not scratched.
IMPORTANT
The lenses are electrically heated to melt
ice or snow. If necessary, brush snow
away from the lenses.
Related information
BLIS* - operation (p. 251)
BLIS - symbols and messages (p. 253)
BLIS* - operation
BLIS (Blind Spot Information System) is a
function designed for providing support for
the driver when driving in dense traffic on
roads with several lanes in the same direction.
Activate/deactivate BLIS
BLIS is activated when the engine is started.
The indicator lamps in the door panels flash
three times when BLIS is activated.
Button for activating/deactivating.
The system can be deactivated/activated
after starting the engine with one press on the
BLIS button.
Some combinations of the selected equip-
ment leave no vacant space for a button in
the centre console - in which case the func-
tion is operated in the car's menu system
(p. 113) MY CAR.
When BLIS is deactivated, the lamp in the
button extinguishes and a message is shown
in the combined instrument panel.
When BLIS is activated the lamp in the button
illuminates, the combined instrument panel
shows a new text message and the indicator
lamps in the door panels flash 3 times. Press
the left-hand stalk switch OK button in order
to switch off the text message.
When BLIS operates
A = approx. 9.5 m and B = approx. 3.0 m.
The system operates when the car is driven
at a speed above 10 km/h.
When a camera (1) has detected a vehicle
inside the blind spot zone the indicator lamp
(2) illuminates with a constant glow, see over-
view illustration (p. 250).
BLIS advises the driver with a message if a
fault arises in the system. If, for example, the
07 Driver support
07
* Option/accessory, for more information, see Introduction.
253
Low stationary sunlight shining into the camera.
IMPORTANT
Repair of the BLIS system components
must only be performed by a workshop -
an authorised Volvo workshop is recom-
mended.
Related information
BLIS* (p. 250)
BLIS - symbols and messages (p. 253)
BLIS - symbols and messages
In situations where the BLIS (Blind Spot
Information System) (p. 250) function fails or
is interrupted, the combined instrument panel
may show a symbol, supplemented by an
explanatory message. Follow any recommen-
dation given.
Message examples:
Message Specification
BLIS ON
The BLIS system is acti-
vated.
Blind spot
syst. Serv-
ice required
Blind spot syst. disen-
gaged - contact a work-
shop.
Blind spot
syst. Cam-
era blocked
The BLIS camera is
blocked by dirt, snow or
ice - clean the lenses.
Message Specification
BLIS
Reduced
function
Reduced function in the
data transmission
between the BLIS sys-
tem's camera and the
car's electrical system.
The camera resets itself
when the data transmis-
sion between the BLIS
system's camera and the
car's electrical system
returns to normal.
BLIS OFF
The BLIS system is deacti-
vated.
A text message can be acknowledged by
briefly pressing the OK button on the direc-
tion indicator stalk.
Related information
BLIS* (p. 250)
07 Driver support
07
254
* Option/accessory, for more information, see Introduction.
Adjustable steering force*
Speed related power steering causes the
steering wheel force to increase with the
speed of the car in order to give the driver
enhanced sensitivity.
On motorways the steering feels firmer.
Steering is light and requires no extra effort
when parking and at low speed.
The driver can choose between three differ-
ent levels of steering force for road respon-
siveness or steering sensitivity in the menu
system MY CAR, MY CAR (p. 113):
Once there, search for
Steering force
level and select Low, Medium or High.
This setting is not accessible when the car is
moving.
NOTE
In certain situations the power steering
may become too hot and then needs to be
temporarily cooled - during this time the
power steering operates with reduced
power and turning the steering wheel may
then be perceived to be slightly heavier.
In parallel with the temporarily reduced
steering assistance the combined instru-
ment panel shows a message.
Related information
MY CAR (p. 113)
Type approval - radar system
Type approval for the radar system can be
read in the table.
Coun-
try/
Area
Singa-
pore
IDA: Infocomm Development
Authority of Singapore.
Brazil
Europe
Delphi Electronics &
Safety hereby declares that
L2C0038TR and L2C0049TR
are in compliance with the
essential requirements and
other relevant provisions of
Directive 1999/5/EC. This dec-
laration of conformity may, if
necessary, be consulted with
Delphi Electronics & Safety /
One Corporate Center /
Kokomo, Indiana 46904-9005
USA.
Related information
Radar sensor (p. 210)
STARTING AND DRIVING
08 Starting and driving
08
256
* Option/accessory, for more information, see Introduction.
Alcohol lock*
The function of the alcohol lock is to prevent
the car from being driven by individuals under
the influence of alcohol. Before the engine
can be started the driver must take a breath
test that verifies that he/she is not under the
influence of alcohol. Alcohol lock calibration
takes place in accordance with each market's
limit value in force for driving legally.
WARNING
The alcohol lock is an aid and does not
exempt the driver from responsibility. It is
always the responsibility of the driver to be
sober and to drive the car safely.
Related information
Alcohol lock* - functions and operation
(p. 256)
Alcohol lock* - storage (p. 257)
Alcohol lock* - before starting the engine
(p. 257)
Alcohol lock* - to bear in mind (p. 259)
Alcohol lock* - symbols and text mes-
sages (p. 260)
Alcohol lock* - functions and
operation
Functions
Nozzle for breath test.
Switch.
Transmission button.
Lamp for battery status.
Lamp for result of breath test.
Lamp indicates ready for breath test.
Operation - battery
Alcohol lock indicator lamp (4) shows battery
status:
Indicator
lamp (4)
Battery status
Green flash-
ing
Charging in progress
Green Fully charged
Yellow Semi-charged
Red Discharged - fit the charger
in the holder or connect the
power supply cable from
the glovebox.
NOTE
Store the alcohol lock in its holder. This
will keep the built-in battery fully charged
and the alcohol lock is activated automati-
cally when the car is opened.
Related information
Alcohol lock* (p. 256)
Alcohol lock* - storage (p. 257)
Alcohol lock* - before starting the engine
(p. 257)
Alcohol lock* - to bear in mind (p. 259)
Alcohol lock* - symbols and text mes-
sages (p. 260)
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
257
Alcohol lock* - storage
Store the alcohol lock in its holder. Release
the handheld unit by depressing it slightly in
its holder and releasing it - it then springs out
and can be removed from the holder.
Handheld unit storage and charging station.
Replace the handheld unit in the holder
by pushing it in until it engages.
Store the handheld unit in the holder -
this provides it with the best protection
and keeps its batteries fully charged.
Related information
Alcohol lock* (p. 256)
Alcohol lock* - functions and operation
(p. 256)
Alcohol lock* - before starting the engine
(p. 257)
Alcohol lock* - to bear in mind (p. 259)
Alcohol lock* - symbols and text mes-
sages (p. 260)
Alcohol lock* - before starting the
engine
The alcohol lock is activated automatically
and is then ready for use when the car is
opened.
Nozzle for breath test.
Switch.
Transmission button.
Lamp for battery status.
Lamp for result of breath test.
Lamp indicates ready for breath test.
1. When the indicator lamp (6) is green the
alcohol lock is ready for use.
2. Withdraw the alcohol lock from its holder.
If the alcohol lock is outside the car when
||
08 Starting and driving
08
258
* Option/accessory, for more information, see Introduction.
it is unlocked then it must first be acti-
vated with the switch (2).
3. Fold up the nozzle (1), take a deep breath
and blow with an even pressure until a
"click" is heard after approx. 5 seconds.
The result will be one of the alternatives in
the following table Result after breath
test.
4. If no message is shown then the trans-
mission to the car may have failed - in
which case, press the button (3) to trans-
mit the result to the car manually.
5. Fold down the nozzle and refit the alcohol
lock in its holder.
6. Start the engine following an approved
breath test within 5 minutes - otherwise it
must be repeated.
Result after breath test
Indicator lamp
(5) + Display
text
Specification
Green lamp +
Alcoguard
Approved test
Start the engine - no
alcohol content meas-
ured.
Yellow lamp +
Alcoguard
Approved test
Engine starting possi-
ble - measured alcohol
content is above
0.1 promille but below
the limit value in
force
A
.
Red lamp + Dis-
approved test
Wait 1 minute
to try again
Engine starting not
possible - measured
alcohol content is
above the limit value in
force
A
.
A
Limit values vary from country to country. Find out what
applies in your country. See also Alcohol lock* (p. 256).
NOTE
After a completed period of driving, the
engine can be restarted within 30 minutes
without a new breath test.
Related information
Alcohol lock* (p. 256)
Alcohol lock* - functions and operation
(p. 256)
Alcohol lock* - storage (p. 257)
Alcohol lock* - to bear in mind (p. 259)
Alcohol lock* - symbols and text mes-
sages (p. 260)
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
259
Alcohol lock* - to bear in mind
In order to obtain correct function and as
accurate a measurement result as possible:
Avoid eating or drinking
approx. 5 minutes before the breath test.
Avoid excess windscreen washing - the
alcohol in the washer fluid may result in
an incorrect measurement result.
Change of driver
In order to ensure that a new breath test is
carried out in the event of a change of driver -
depress the switch (2) and the send button (3)
simultaneously for approx. 3 seconds. At
which point the car returns to start inhibition
mode and a new approved breath test is
required before starting the engine.
Calibration and service
The alcohol lock must be checked and cali-
brated at a workshop
1
every 12 months.
30 days before recalibration is necessary the
combined instrument panel shows the mes-
sage
Alcoguard Calibration required See
manual. If calibration is not carried out within
these 30 days then normal engine starting will
be blocked - only starting with the Bypass
function will then be possible, see the follow-
ing heading "Emergency situation".
The message can be cleared by pressing the
send button (3) once. Otherwise it goes out
on its own after approx. 2 minutes but then
reappears each time the engine is started -
only recalibration at a workshop
1
can clear
the message permanently.
Cold or hot weather
The colder the weather the longer it takes
before the alcohol lock is ready for use:
Temperature (ºC) Maximum heat-
ing time (sec-
onds)
+10 to +85 10
-5 to +10 60
-40 to -5 180
At temperatures below -20 ºC or above
+60 ºC the alcohol lock requires additional
power supply. The combined instrument
panel shows
Alcoguard Please insert
power cable. In which case, connect the
power supply cable from the glovebox and
wait until indicator lamp (6) is green.
In extremely cold weather the heating time
can be reduced by taking the alcohol lock
indoors.
Emergency situation
In the event of an emergency situation or the
alcohol lock is out of order, it is possible to
bypass the alcohol lock in order to drive the
car.
NOTE
All Bypass activation is logged and saved
in memory, see Recording data (p. 18).
After the Bypass function has been activated
the combined instrument panel shows
Alcoguard Bypass enabled the whole time
while driving and can only be reset by a work-
shop
1
.
The Bypass function can be tested without
the error message being logged - in which
case, carry out all the steps without starting
the car. The error message is cleared when
the car is locked.
When the alcohol lock is installed, either the
Bypass or Emergency function is selected as
the bypassing option. This setting can be
changed afterwards at a workshop
1
.
Activating the Bypass function
Depress and hold the left-hand stalk
switch OK button and the button for haz-
ard warning flashers simultaneously for
approx. 5 seconds - the combined instru-
ment panel first shows
Bypass activated
1
An authorised Volvo workshop is recommended.
||
08 Starting and driving
08
260
* Option/accessory, for more information, see Introduction.
Please wait for 1 minute and then
Alcoguard Bypass enabled - after
which the engine can be started.
This function can be activated several times.
The error message shown during driving can
only be cleared at a workshop
1
.
Activating the Emergency function
Depress and hold the left-hand stalk
switch OK button and the button for haz-
ard warning flashers simultaneously for
approx. 5 seconds - the combined instru-
ment panel shows
Alcoguard Bypass
enabled and the engine can be started.
This function can be used once, after which a
reset must be made at a workshop
1
.
Related information
Alcohol lock* - functions and operation
(p. 256)
Alcohol lock* - storage (p. 257)
Alcohol lock* - before starting the engine
(p. 257)
Alcohol lock* (p. 256)
Alcohol lock* - symbols and text mes-
sages (p. 260)
Alcohol lock* - symbols and text
messages
In addition to the previously described mes-
sages related to how the alcohol lock works
before starting the engine (p. 257) the com-
bined instrument panel's display can also
show the following:
Display text Meaning/Action
Alcoguard
Restart possi-
ble
The engine has been
switched off for less
than 30 minutes -
engine starting possible
without new test.
Alcoguard
Service
required
Contact a workshop
A
.
Alcoguard No
signal
received
Transmission failed -
send manually with but-
ton (3) or take a new
breath test.
Alcoguard
Please try
again
Test failed - take a new
breath test.
Alcoguard
Please blow
longer
Blowing too short - blow
for longer.
Display text Meaning/Action
Alcoguard
Please blow
softer
Blowing too hard - blow
more gently.
Alcoguard
Please blow
harder
Blowing too weak -
blow harder.
Alcoguard
preheating
Please wait
Heating not finished -
wait for text
Alcoguard
Please blow for 5 sec-
onds.
A
An authorised Volvo workshop is recommended.
Related information
Alcohol lock* (p. 256)
Alcohol lock* - functions and operation
(p. 256)
Alcohol lock* - storage (p. 257)
Alcohol lock* - before starting the engine
(p. 257)
Alcohol lock* - to bear in mind (p. 259)
1
An authorised Volvo workshop is recommended.
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
261
Starting the engine
The engine is started and switched off using
the remote control key and the START/STOP
ENGINE button.
Ignition switch with remote control key extrac-
ted/inserted. and START/STOP ENGINE button.
IMPORTANT
Do not press in the remote control key
incorrectly turned - hold the end with the
detachable key blade, see Detachable key
blade - detaching/attaching (p. 171).
1. Insert the remote control key in the igni-
tion switch and press it in to its end posi-
tion. Note that if the car is equipped with
alcohol lock* then a breath test must first
be approved before the engine can be
started. For more information on the
Alcohol lock, see Alcohol lock* (p. 256).
2.
Hold the clutch pedal fully depressed
2
.
(For cars with automatic gearbox -
Depress the brake pedal.)
3. Press the START/STOP ENGINE button
and then release it.
NOTE
For diesel-engined cars, there may be a
slight delay before the engine can be
started -
Engine preheating is displayed
in the meantime.
When the engine is started the starter motor
works until the engine is started or until its
overheating protection triggers.
IMPORTANT
If the engine fails to start after 3 attempts -
wait for 3 minutes before making a further
attempt. Starting capacity increases if the
battery is allowed to recover.
WARNING
Never remove the remote control key from
the ignition switch after starting the engine
or when the car is being towed.
WARNING
Always remove the remote control key
from the ignition switch when leaving the
car, and make sure that the key position is
0 - in particular if there are children in the
car. For information on how this works -
see Key positions (p. 78).
NOTE
The idling speed can be noticeably higher
than normal for certain engine types during
cold starting. This is done in order that the
emissions system can reach normal oper-
ating temperature as quickly as possible,
which minimises exhaust emissions and
protects the environment.
Keyless drive*
Follow steps 2-3 for keyless (p. 175) starting
of the engine.
2
If the car is moving then it is enough to press the START/STOP ENGINE button to start the engine.
||
08 Starting and driving
08
262
NOTE
A prerequisite for the engine to start is that
one of the car's remote control keys with
the Keyless drive function is in the passen-
ger compartment or cargo area.
WARNING
Never remove the remote control key from
the car while driving or during towing.
Related information
Switching off the engine (p. 262)
Switching off the engine
The engine is switched off using the START/
STOP ENGINE button.
To stop the engine:
Press START/STOP ENGINE - the
engine stops.
If the gear selector is not in P position or if
the car is moving:
Press twice on START/STOP ENGINE or
hold the button depressed until the
engine stops.
Related information
Key positions (p. 78)
Steering lock
The steering lock makes steering difficult if
the car is e.g. taken unlawfully.
Function
The steering lock unlocks when the
remote control key is in the ignition
switch
3
and the START/STOP ENGINE
button is depressed.
The steering lock locks when the driver's
door is opened after the engine has been
switched off.
A mechanical noise can be perceived when
the steering lock unlocks or locks.
Related information
Starting the engine (p. 261)
Key positions (p. 78)
Steering wheel (p. 84)
3
Cars with Keyless drive only need to have a remote control key inside the passenger compartment.
||
08 Starting and driving
08
264
* Option/accessory, for more information, see Introduction.
1. Briefly press on the key's button (2).
2. Follow this immediately afterwards with a
long press - at least 2 seconds - on
button (3).
If the conditions for ERS are fulfilled then the
following takes place:
1. The direction indicators flash quickly sev-
eral times.
2. The engine starts.
3. The direction indicators illuminate with a
constant glow for 3 seconds to verify that
the engine has started.
NOTE
After remote starting, the car continues to
be locked but with deactivated movement
detector*.
With PCC
6
key
The light indication for Approach
lighting
7
flashes several times when
the button is pressed and then goes
to constant glow if all criteria for
ERS have been fulfilled. However, this does
not mean that ERS has started the engine.
To check whether ERS has started the
engine, the user can press the button (5) - if
the engine has started, there is a light indica-
tion by the buttons (2) and (3).
Active functions
The following functions are activated with a
remote started engine:
Ventilation system
Audio/video system
Approach lighting.
Deactivated functions
The following functions are deactivated with a
remote started engine:
headlamps
Position lamps
Number plate lighting
Windscreen wiper.
ERS is interrupted
The following steps switch off an ERS-started
engine:
The remote control key's
button (1), (2) or (4) is depressed
The car is unlocked
A door is opened
Accelerator pedal or brake pedal is
depressed
The gear selector is moved out of P posi-
tion
Active ERS time exceeds 15 minutes.
When an ERS-started engine is switched off,
the direction indicators illuminate with a con-
stant glow for 3 seconds.
Related information
Remote start (ERS)* (p. 263)
Remote start (ERS) - symbols and mes-
sages (p. 265)
6
For more information on the PCC key, see Remote control key with PCC* - unique functions (p. 169).
7
For more information on Approach lighting, see Remote control key - functions (p. 167) and Approach lighting (p. 96).
08 Starting and driving
08
}}
267
Make further attempts to start with the
START/STOP ENGINE button.
Check that the engine block heater has
been plugged in and, where appropriate,
connect it for the time indicated above.
IMPORTANT
If the engine does not start despite repea-
ted start attempts, you are recommended
to contact an authorised Volvo workshop.
Fuel adaptation
Flexifuel engines can be driven on both 95
octane unleaded petrol and bioethanol E85.
Both fuels are filled in the common fuel tank
so that any variations of mixing ratios
between these two fuels is possible.
If the fuel tank is filled with petrol after the car
has been driven on bioethanol E85 (or vice
versa) then the engine may run slightly
unevenly for a time. For this reason it is
important to allow the engine to accustom
itself (adapt) to the new fuel mixture.
Adaptation takes place automatically when
the car is driven for a short period at an even
speed.
IMPORTANT
After the fuel mixture in the tank has been
changed an adaptation should be made by
driving at an even speed for about 15
minutes.
If the starter battery has been discharged or
disconnected then a slightly longer period of
driving is required for the adaptation as the
memory for the electronics has been cleared.
Related information
Jump starting with battery (p. 267)
Starting the engine (p. 261)
Jump starting with battery
If the starter battery (p. 371) is discharged
then the car can be started with current from
another battery.
When jump starting the car, the following
steps are recommended to avoid short cir-
cuits or other damage:
1. Set the car's electrical system in key
position 0, see Key positions - functions
at different levels (p. 78).
2. Check that the donor battery has a volt-
age of 12 V.
3. If the donor battery is installed in another
car - switch off the donor car's engine
and make sure that the two cars do not
touch each other.
||
08 Starting and driving
08
268
* Option/accessory, for more information, see Introduction.
4. Connect one of the red jump lead's
clamps to the donor battery's positive
terminal (1).
IMPORTANT
Connect the start cable carefully to avoid
short circuits with other components in the
engine compartment.
5. Open the clips on the front cover of the
battery in your car and remove the cover,
see Starter battery - replacement
(p. 374).
6. Connect the red jump lead's other clamp
onto the car's positive terminal (2).
7. Connect one of the black jump lead's
clamps to the donor battery's negative
terminal (3).
8. Connect the other clamp to a grounding
point, e.g. right-hand engine mounting at
the top, the outer screw head (4).
9. Check that the jump lead clamps are
affixed securely so that there are no
sparks during the starting procedure.
10. Start the engine of the "donor car" and
allow it to run a few minutes at a speed
slightly higher than idle
approx. 1500 rpm.
11. Start the engine in the car with the dis-
charged battery.
IMPORTANT
Do not touch the crocodile clips during the
start procedure. There is a risk of sparks
forming.
12. Remove the jump leads in reverse order -
first the black and then the red.
> Make sure that none of the black jump
lead's clamps comes into contact with
the battery's positive terminal or the
clamp connected to the red jump lead!
WARNING
The battery can generate oxyhydrogen
gas, which is highly explosive. A spark
can be formed if a jump lead is con-
nected incorrectly, and this can be
enough for the battery to explode.
The battery contains sulphuric acid,
which can cause serious burns.
If sulphuric acid comes into contact
with eyes, skin or clothing, flush with
large quantities of water. If acid
splashes into the eyes - seek medical
attention immediately.
Related information
Starting the engine (p. 261)
Gearboxes
There are two main types of gearbox. Manual
gearbox and automatic gearbox.
Manual gearbox (p. 269)
Automatic gearbox - Geartronic (p. 270)
and Powershift (p. 274)
IMPORTANT
To prevent damage to any drive system
components, the working temperature of
the gearbox is checked. If there is a risk of
overheating, a warning symbol is illumi-
nated in the combined instrument panel in
conjunction with a text message being
shown. Follow the recommendation given
in the text message.
Related information
Automatic gearbox -- Geartronic*
(p. 270)
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
269
Manual gearbox
The function of the gearbox is to change the
gear ratio depending on speed and power
requirements.
Gearshift pattern 6-speed gearbox.
The 6-speed box is available in two versions -
reverse gear position differs between them.
Look at the actual gearshift pattern imprinted
on the gear lever.
Depress the clutch pedal fully during
each gear change.
Take your foot off the clutch pedal
between gear changes.
WARNING
Always apply the parking brake when
parking on a slope - leaving the car in gear
is not sufficient to hold the car in all situa-
tions.
Reverse gear inhibitor
The reverse gear inhibitor hinders the possi-
bility of mistakenly attempting to engage
reverse gear during normal forward travel.
Follow the gearing pattern printed on the
gear lever and start from neutral position,
N before moving it to R position.
Engage reverse gear only when the car is
stationary.
NOTE
With the upper variant of the shifting pat-
tern for 6-speed gearbox (see previous
illustration) - first press down the gear
lever in the N position in order to engage
reverse gear.
Related information
Gearboxes (p. 268)
Transmission fluid - grade and volume
(p. 413)
Gear shift indicator*
The gear shift indicator notifies the driver
when it is appropriate to engage the next
higher or lower gear.
An essential detail in connection with environ-
mental driving is to drive in the right gear and
to change gear in plenty of time.
An indicator is available as an aid on some
variants - GSI (Gear Shift Indicator) - which
notifies the driver when it is appropriate to
engage the next higher or lower gear in order
to obtain the lowest possible fuel consump-
tion.
However, taking into consideration characte-
ristics such as performance and vibration-free
running, it may be advantageous to change
gear at a higher engine speed. The framed
number indicates the current gear.
Manual gearbox
Gear shift indicator for man-
ual gearbox. Only one
marker is illuminated at a
time - during normal driving
it is only illuminated in the
centre.
When gearing up/down as recommended, the
upper one is illuminated at "+" or the lower at
"-", marked red in the illustration.
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
271
Neutral position - N
No gear is engaged and the engine can be
started. Apply the parking brake if the car is
stationary with the gear selector in N position.
To be able to move the gear selector from N
to other gear positions, the brake pedal must
be depressed and the remote control key
must be in key position II.
Drive position - D
D is the normal driving position. Shifting up
and down takes place automatically based on
the level of acceleration and speed. The car
must be stationary when the gear selector is
moved to D position from R position.
Geartronic – Manual gear positions
(+S-)
The driver can also change gear manually
using the Geartronic automatic gearbox. The
car engine-brakes when the accelerator pedal
is released.
The manual gear position is reached
by moving the lever to the side from
position D to the end position at
"+S-". The combined instrument
panel's symbol "+S-" changes colour from
WHITE to ORANGE and the digits
1, 2, 3 etc.
are displayed in a box, corresponding to the
gear that has just been selected.
Move the lever forwards towards "+"
(plus) to change up a gear and release the
lever, which returns to its rest position
between + and .
or
Pull the lever back towards "" (minus) to
change down a gear and release it.
The manual gearshift mode "+S–" can be
selected at any time while driving.
Geartronic automatically shifts down if the
driver allows the speed to decrease lower
than a level suitable for the selected gear, in
order to avoid jerking and stalling.
To return to automatic driving mode:
Move the lever to the side to the end
position at D.
NOTE
If the gearbox has a Sport programme
then the gearbox will only become manual
after the gear selector has been moved
forwards or backwards in its "+S–" posi-
tion. The combined instrument panel then
changes indication from
S to show which
of the gears 1, 2, 3 etc. is engaged.
Paddles*
As a supplement to manual gear changing
with the gear selector there are also controls
located on the steering wheel, so-called
"paddles".
To be able to change gear with the steering
wheel paddles they must first be activated.
This is by means of pulling one of the paddles
toward the steering wheel - the combined
instrument panel then changes indication
from "D" to a figure, which indicates the cur-
rent gear.
To then change gear one step:
Pull one of the paddles backwards -
towards the steering wheel - and release.
Both steering wheel "paddles".
"-": Selects the next lower gear.
"+": Selects the next higher gear.
A gear change occurs at each pull of the pad-
dle provided that the engine speed does not
leave the permitted range.
After each gear change the combined instru-
ment panel changes figure to show the cur-
rent gear.
||
08 Starting and driving
08
272
* Option/accessory, for more information, see Introduction.
NOTE
Automatic deactivation
If the steering wheel paddles are not used
then they are deactivated after a short time
- this is indicated when the combined
instrument panel switches indication, from
the figure for the current gear back to "D".
The exception is during engine braking -
then the paddles are activated as long as
engine braking is in progress.
Manual deactivation
The steering wheel paddle shifters can
also be deactivated manually:
Pull both paddles toward the steering
wheel and hold until the combined
instrument panel changes character
from the figure for the current gear to
"D".
The paddles can also be used with the gear
selector in Sport mode* - then the paddles
are constantly activated without being deacti-
vated.
Geartronic - Sport mode* (S)
8
The Sport programme provides
sportier characteristics and allows
higher engine speed for the gears.
At the same time it responds more
quickly to acceleration. During active driving,
the use of a lower gear is prioritised, leading
to a delayed upshift.
To activate Sport mode:
Move the gear selector to the side from D
position to the end position at "+S–" - the
combined instrument panel changes indi-
cation from
D to S.
Sport mode can be selected at any time while
driving.
Geartronic - Winter mode
It can be easier to pull away on slippery roads
if 3rd gear is engaged manually.
1. Depress the brake pedal and move the
gear selector from D position to the end
position at "+S–" - the combined instru-
ment panel changes indication from
D to
the figure
1
9
.
2. Scroll up to gear 3 by pushing the lever
forward towards "+" (plus) twice - the dis-
play shifts the indication from
1 to 3.
3. Release the brake and accelerate care-
fully.
The gearbox "winter mode" means that the
car moves off with a lower engine speed and
reduced engine power on the drive wheels.
Kick-down
When the accelerator pedal is pressed all the
way to the floor (beyond the position normally
regarded as full acceleration) a lower gear is
immediately engaged. This is known as kick-
down.
If the accelerator is released from the kick-
down position, the gearbox automatically
changes up.
Kick-down is used when maximum accelera-
tion is needed, such as for overtaking.
Safety function
To prevent overrevving the engine, the gear-
box control program has a protective down-
shift inhibitor which prevents the kick-down
function.
Geartronic does not permit downshifting/
kick-down which would result in an engine
speed high enough to damage the engine.
Nothing happens if the driver still tries to shift
down in this way at high engine speed – the
original gear remains engaged.
When kick-down is activated the car can
change one or more gears at a time depend-
ing on engine speed. The car changes up
8
With certain engines only.
9
If the car has Sport mode* then "S" is shown first.
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
273
when the engine reaches its maximum speed
in order to prevent damage to the engine.
Towing
If the car has to be towed - see important
information in the section Towing (p. 312).
Related information
Transmission fluid - grade and volume
(p. 413)
Automatic gearbox -- Powershift*
(p. 274)
Gearboxes (p. 268)
08 Starting and driving
08
274
* Option/accessory, for more information, see Introduction.
Automatic gearbox -- Powershift*
The Powershift automatic gearbox transmits
the motive force from the engine to the drive
wheels with double mechanical clutch discs,
as opposed to Geartronic which instead uses
a hydraulic torque converter.
D: Automatic gear positions. +S–: Manual gear
positions. S: Sport mode*.
Powershift transmission operates in the same
way and has similar controls and functions as
the Geartronic automatic transmission.
One exception is the function "Geartronic -
Winter mode" (p. 270):
Powershift enables driving away on a
slippery road surface if 2nd gear is
engaged manually - instead of 3rd gear
with Geartronic.
Towing
The model with Powershift transmission
should not be towed as it is dependent on the
engine running in order to receive sufficient
lubrication. If towing (p. 312) still has to take
place, the route must be as short as possible
and then at very low speed.
In the event of uncertainty as to whether the
car is equipped with Powershift or Geartronic
transmission, this can be verified by checking
the designation on the gearbox label under
the bonnet, Type designations (p. 397). The
designation ”MPS6” means that it is
Powershift transmission - otherwise it is
Geartronic automatic transmission.
See also important information in section
Towing (p. 312).
To bear in mind
The transmission's double clutch has over-
load protection that is activated if it becomes
too hot, e.g. if the car is held stationary with
the accelerator pedal on an uphill gradient for
a long time.
Overheated transmission causes the car to
shake and vibrate, and the warning symbol
illuminates and the combined instrument
panel shows a message. The transmission
can also overheat during slow driving in
queues (10 km/h or slower) on an uphill gradi-
ent, or with a trailer hitched. The gearbox
cools down when the car is stationary, with
foot brake depressed and the engine running
at idling speed.
Overheating during slow driving in queues
can be avoided by driving in stages:
Stop the car and wait with your foot on
the brake pedal until there is a moderate
distance to the traffic ahead, drive for-
ward a short distance, and then wait
another moment with your foot on the
brake pedal.
IMPORTANT
Use the foot brake to hold the car station-
ary on an uphill gradient - do not hold the
car with the accelerator pedal. The gear-
box could then overheat.
Text message and action
In some situations the combined instrument
panel may show a text message at the same
time as a symbol is illuminated.
08 Starting and driving
08
276
Gear selector inhibitor
There are two different types of gear selector
inhibitor - mechanical and automatic.
Mechanical gear selector inhibitor
G021351
M: Manual shifting
10
- "+/-" or "Sport" mode.
The gear selector can be moved forward and
back freely between N and D. Other positions
are locked with a latch that is released with
the inhibitor button on the gear selector.
With the inhibitor button depressed the lever
can be moved forwards or backwards
between P, R, N and D.
Automatic gear selector inhibitor
The automatic gearbox has special safety
systems:
Parking position (P)
Stationary car with engine running:
Keep your foot on the brake pedal when
moving the gear selector to another posi-
tion.
Electric gear inhibitor – Shiftlock
Parking position (P)
To be able to move the gear selector from P
to other gear positions, the brake pedal must
be depressed and the remote control key
must be in key position II (p. 78).
Shiftlock – Neutral (N)
If the gear selector is in N position and the
car has been stationary for at least 3 seconds
(irrespective of whether the engine is running)
then the gear selector is locked.
To be able to move the gear selector from N
to other gear positions, the brake pedal must
be depressed and the remote control key
must be in key position II, see Key positions
(p. 78).
Deactivate automatic gear selector
inhibitor
If the car cannot be driven, e.g. due to a flat
starter battery, the gear selector must be
moved from the P position so that the car can
be moved.
Lift the rubber mat in the compartment
behind the centre console and locate a
hole
11
for the key blade (p. 171) in the
bottom of the compartment.
Search for a spring-loaded button down
in the hole with the key blade; depress
the button with the blade and hold.
Move the gear selector from the P posi-
tion and pull up the key blade.
4. Set the rubber mat back in place.
10
The illustration is schematic.
11
There may be 2 holes - one for the key blade and one that fixes the rubber mat.
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
277
Related information
Automatic gearbox -- Geartronic* (p. 270)
Automatic gearbox -- Powershift* (p. 274)
Hill start assist (HSA)*
12
The foot brake can be released before setting
off or reversing uphill - the HSA (Hill Start
Assist) function means that the car does not
roll backwards.
The function means that the pedal pressure in
the brake system remains for several seconds
while the driver's foot is moved from brake
pedal to accelerator pedal.
The temporary braking effect releases after
several seconds or when the driver acceler-
ates.
Related information
Starting the engine (p. 261)
All Wheel Drive - AWD*
Optimal traction is achieved with all-wheel
drive.
All Wheel Drive is always available
All Wheel Drive (All Wheel Drive) means that
the car is driving all four wheels at the same
time.
The power is automatically distributed
between the front and rear wheels. An elec-
tronically controlled clutch system distributes
the power to the wheels that have the best
grip on the current road surface. This pro-
vides the best traction and prevents wheel
spin. Under normal driving conditions, the
majority of power is transmitted to the front
wheels.
All Wheel Drive improves driving safety in
rain, snow and icy conditions.
12
Depends on engine and gearbox combination. HSA not possible with some combinations.
08 Starting and driving
08
278
* Option/accessory, for more information, see Introduction.
Hill Descent Control (HDC)*
13
HDC can be compared to an automatic
engine brake. When you release the accelera-
tor on downhill gradients the car is normally
braked by means of the engine striving for low
engine idling speeds, so-called engine brak-
ing. But the steeper the roadway and the
more load in the car, the faster the car coasts
despite engine braking - the HDC function
compensates for this with automatic brake
intervention.
General information on HDC
HDC makes it possible to increase/reduce
speed on steep downhill gradients, with a
foot only on the accelerator pedal, without
using the foot brake. The sensitivity of the
accelerator pedal decreases and becomes
more precise by means of the full actuation of
the pedal being restricted to adjusting engine
speed within a limited range. The brake sys-
tem brakes itself and provides the car with a
low and even speed, so allowing the driver to
fully focus on steering.
HDC is particularly helpful on steep gradients
with an uneven road surface and slippery
sections. E.g. when launching a boat on a
trailer from a ramp.
WARNING
HDC does not work in all situations but is
designed merely as a supplementary aid.
The driver always bears ultimate responsi-
bility for ensuring that the vehicle is driven
safely.
Function
HDC On/Off.
HDC is activated or deactivated with one of
the centre console's switches. The lamp
within it illuminates when the function is acti-
vated.
When HDC is operating, the combined
instrument panel's symbol illuminates
combined with the text message
Hill
descent control ON.
The function only operates in first gear posi-
tion and in reverse gear. For an automatic
gearbox, gear position 1 must be selected,
which is shown with the figure
1 in the com-
bined instrument panel, see Automatic gear-
box -- Geartronic* (p. 270).
NOTE
HDC cannot be activated on an automatic
gearbox when the gear selector is in posi-
tion D.
Operation
HDC allows the car to roll at a maximum of
10 km/h forwards with engine braking and
7 km/h backwards. However, any speed
within the gear's speed register can be
selected using the accelerator pedal. When
the accelerator pedal is released, the car is
braked quickly to 10 or 7 km/h respectively,
irrespective of the hill's gradient and without
the need for the foot brake.
The brake lights come on automatically when
the function is operating. The driver can brake
or stop the car at any time by using the foot
brake.
HDC is deactivated:
13
HDC is only possible on the XC70 AWD.
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
281
Deactivating the Start/Stop function
In certain situations, it may
advisable to temporarily
switch off the automatic
Start/Stop function - this is
carried out with a push of
this button.
Disengaged function is indicated by
the combined instrument panel's
Start/Stop symbol and the On/Off
button's lamp extinguishing.
The Start/Stop function is disengaged until it
is reactivated with the button or until the next
time the engine is started with the key.
Start assistance HSA
The foot brake can also be released on an
uphill slope to auto-start the engine - the HSA
(p. 277) (Hill Start Assist) function prevents
the car from rolling backwards.
HSA means that the pressure in the brake
system remains temporarily available while
the driver moves his/her foot from the brake
pedal to the accelerator pedal for driving off
with the engine having stopped automatically.
The temporary braking effect releases after a
couple of seconds or when the driver acceler-
ates.
Related information
Start/Stop* (p. 279)
Starting the engine (p. 261)
Start/Stop* - settings (p. 285)
Start/Stop* - the engine does not auto-
start (p. 284)
Start/Stop* - the engine auto-starts
(p. 283)
Start/Stop* - the engine does not stop
(p. 281)
Start/Stop* - involuntary stop manual
gearbox (p. 284)
Start/Stop* - symbols and messages
(p. 286)
Battery - Start/Stop (p. 375)
Start/Stop* - the engine does not stop
Although the Start/Stop function is activated,
the engine does not always stop automati-
cally.
The engine does not auto-stop if:
Conditions M/A
A
the car has not first achieved
approx. 8 km/h after a key start or
the last auto-stop.
M +
A
the driver has opened the seat-
belt's buckle.
M +
A
the capacity of the starter battery
is below the minimum permissible
level.
M +
A
the engine does not have normal
operating temperature.
M +
A
ambient temperature is around
freezing point or above
approx. 30 °C.
M +
A
the windscreen's electric heating
is activated.
M +
A
the environment in the passenger
compartment differs from the pre-
set values - indicated by the venti-
lation fan running at a high speed.
M +
A
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
283
Start/Stop* - the engine auto-starts
An auto-stopped engine may restart in certain
cases without the driver having decided that
the journey should continue.
In the following cases the engine also starts
automatically if the driver has not depressed
the clutch pedal (manual gearbox) or takes
his/her foot off the brake pedal (automatic
gearbox):
Conditions
M/A
A
Misting forms on the windows. M + A
The environment in the passenger
compartment deviates from the
preset values.
M + A
There is a temporarily high current
take-off or starter battery capacity
drops below the lowest permissi-
ble level.
M + A
Repeated pumping of the brake
pedal.
M + A
The bonnet is opened
B
.
M + A
The car starts to roll, or there is a
small increase in speed if the car
auto-stopped without being com-
pletely stationary.
M + A
Conditions
M/A
A
The driver's seatbelt buckle is
opened with the gear selector in D
or N position.
A
Steering wheel movements
B
.
A
The gear selector is moved out of
the D position to S position
C
, R or
"+/-".
A
The driver's door is opened with
the gear selector in D position - a
"ping" sound and text message
inform that the Start/Stop function
is active.
A
A
M = Manual gearbox, A = Automatic gearbox.
B
With certain engines only.
C
Sport mode.
WARNING
Do not open the bonnet when the engine
has stopped automatically - the engine
may suddenly start automatically. First
switch off the engine as normal using the
START/STOP ENGINE button before
opening the bonnet.
Related information
Start/Stop* (p. 279)
Start/Stop* - function and operation
(p. 280)
Starting the engine (p. 261)
Start/Stop* - settings (p. 285)
Start/Stop* - the engine does not auto-
start (p. 284)
Start/Stop* - the engine does not stop
(p. 281)
Start/Stop* - involuntary stop manual
gearbox (p. 284)
Start/Stop* - symbols and messages
(p. 286)
Battery - Start/Stop (p. 375)
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
285
Start/Stop* - settings
The car's MY CAR menu system, under the
DRIVe heading, contains information about
Volvo's Start/Stop system, as well as recom-
mendations for energy-saving driving techni-
ques.
Related information
Start/Stop* (p. 279)
Start/Stop* - function and operation
(p. 280)
Starting the engine (p. 261)
Start/Stop* - the engine does not auto-
start (p. 284)
Start/Stop* - the engine auto-starts
(p. 283)
Start/Stop* - the engine does not stop
(p. 281)
Start/Stop* - involuntary stop manual
gearbox (p. 284)
Start/Stop* - symbols and messages
(p. 286)
Battery - Start/Stop (p. 375)
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
287
Symbol Message Info/Action
M/A
A
Select P or N to start
Start/Stop has been deactivated - move the gear selector to N or P position and start the
engine as normal with the START/STOP ENGINE button.
A
Press start button
The engine will not start automatically - start the engine as normal with the START/STOP
ENGINE button and the gear selector in P or N.
A
A
M = Manual gearbox, A = Automatic gearbox.
If a message does not go out following com-
pletion of the action then a workshop should
be contacted - an authorised Volvo workshop
is recommended.
Related information
Start/Stop* (p. 279)
Start/Stop* - function and operation
(p. 280)
Starting the engine (p. 261)
Start/Stop* - settings (p. 285)
Start/Stop* - the engine does not auto-
start (p. 284)
Start/Stop* - the engine auto-starts
(p. 283)
Start/Stop* - the engine does not stop
(p. 281)
Start/Stop* - involuntary stop manual
gearbox (p. 284)
Battery - Start/Stop (p. 375)
08 Starting and driving
08
288
* Option/accessory, for more information, see Introduction.
ECO*
ECO
14
is an innovative Volvo function for
automatic-gearbox cars, capable of reducing
fuel consumption by up to 5%, depending on
the driver's driving style. The function gives
the driver the option of a more active environ-
mentally conscious way of driving.
General
The following are changed
upon activation of the ECO
function:
Gearbox gearshift points.
Engine management and response from
the accelerator pedal.
Start/Stop function - the engine can also
auto-stop before the car has stopped
down to being completely stationary.
The Eco Coast function is activated -
engine braking ceases.
Climate control system settings - some
electricity consumers are deactivated or
operate at reduced power.
NOTE
When the ECO function is activated, sev-
eral parameters in the climate control sys-
tem's settings are changed, and several
electricity consumer functions are
reduced. Certain settings can be reset
manually, but full functionality is only
restored by deactivating the ECO function.
ECO - Operation
ECO On/Off
ECO symbol
The ECO function is deactivated when the
engine is switched off, and must therefore be
activated after each time the engine is
started. There are exceptions for certain
engines. However, it is easily verified by
means of both the combined instrument
panel
ECO symbol and the ECO button lamp
illuminating when the function is activated.
ECO function On or Off
Disengaged ECO function is
indicated by the combined
instrument panel
ECO sym-
bol and the ECO button lamp
extinguishing. The function is
then switched off until it is
reactivated with the ECO
button.
Eco Coast - Function
The Eco Coast subfunction means in practice
that engine braking is deactivated, meaning in
turn that the car's kinetic energy is used to
coast for longer distances. When the driver
releases the accelerator pedal the gearbox is
automatically disengaged from the engine
whose speed is reduced to idling speed with
minimum consumption.
This function is intended for use in the event
of an anticipated reduction in speed, e.g. to
coast forward to an intersection or a red light.
Eco Coast enables proactive driving where
the driver can use the so-called "Pulse &
Glide" technique and a minimum of braking.
Combination On and Off
A combination of Eco Coast and temporarily
deactivated ECO function can also collec-
14
Not possible on the XC60 and XC70 with AWD.
08 Starting and driving
08
290
Foot brake
The foot brake is used to reduce the car's
speed while driving.
The car is equipped with two brake circuits. If
a brake circuit is damaged then the brake
pedal will engage deeper and a higher pres-
sure on the pedal is needed to produce the
normal braking effect.
The driver's brake pedal pressure is assisted
by a brake servo.
WARNING
The brake servo only works when the
engine is running.
If the foot brake is used when the engine is
switched off then the pedal will feel stiff and a
higher pedal pressure must be used to brake
the car.
In very hilly terrain or when driving with a
heavy load the brakes can be relieved by
using engine braking. Engine braking is most
efficiently used if the same gear is used
downhill as up.
For more general information on heavy loads
on the car, see Engine oil - adverse driving
conditions (p. 408).
Cleaning the brake discs
Coatings of dirt and water on the brake discs
may result in delayed brake function. With
wet road surfaces, prior to long-stay parking
and after the car has been washed, it is there-
fore advisable to carry out cleaning by brak-
ing gently for a short period while driving.
Maintenance
To keep the car as safe and reliable as possi-
ble, follow the Volvo service intervals as
specified in the Service and Warranty Book-
let.
IMPORTANT
The wear on the brake system's compo-
nents must be checked regularly.
Contact a workshop for information about
the procedure or engage a workshop to
carry out the inspection - an authorised
Volvo workshop is recommended.
Symbols and messages
Symbol Specification
Constant glow – Check the
brake fluid level. If the level is
low, fill with brake fluid and
check for the cause of the
brake fluid loss.
Constant glow for 2 seconds
when the engine is started -
automatic function check.
WARNING
If and illuminate at the same
time, there may be a fault in the brake sys-
tem.
If the level in the brake fluid reservoir is
normal at this stage, drive carefully to the
nearest workshop and have the brake sys-
tem checked - an authorised Volvo work-
shop is recommended.
If the brake fluid is below the MIN level in
the brake fluid reservoir, do not drive fur-
ther before topping up the brake fluid.
The reason for the loss of brake fluid must
be investigated.
Related information
Parking brake (p. 292)
Foot brake - emergency brake lights and
automatic hazard warning flashers
(p. 291)
Foot brake - emergency brake assistance
(p. 291)
Foot brake - anti-lock braking system
(p. 291)
08 Starting and driving
08
}}
293
Disengaging the parking brake
Parking brake control - release.
Cars with manual gearbox
Releasing manually
1. Insert the remote control key in the igni-
tion switch
15
.
2. Depress the foot brake pedal firmly.
3. Pull the control PUSH LOCK/PULL
RELEASE.
>
The parking brake releases and
the combined instrument panel's sym-
bol extinguishes.
NOTE
The parking brake can also be released
manually by depressing the clutch pedal
instead of the brake pedal. Volvo recom-
mends that the brake pedal is used.
Releasing automatically
1. Start the engine.
2. Engage 1st gear or reverse gear.
3. Ease up the clutch and depress the
accelerator.
>
The parking brake releases and
the combined instrument panel's sym-
bol extinguishes.
Cars with automatic gearbox
Releasing manually
1. Insert the remote control key in the igni-
tion switch
15
.
2. Depress the foot brake pedal firmly.
3. Pull the control.
>
The parking brake releases and
the combined instrument panel's sym-
bol extinguishes.
Releasing automatically
1. Put the seatbelt on.
2. Start the engine.
3. Depress the foot brake pedal firmly.
4. Move the gear selector to position D or R
and depress the accelerator.
>
The parking brake releases and
the combined instrument panel's sym-
bol extinguishes.
NOTE
For safety reasons, the parking brake is
only released automatically if the engine is
running and the driver is wearing a seat-
belt. The parking brake is released imme-
diately on cars with automatic gearbox
when the accelerator pedal is depressed
and the gear selector is in position D or R.
Heavy load uphill
A heavy load, such as a trailer, can cause the
car to roll backward when the parking brake
is released automatically on a steep incline.
Avoid this by depressing the control while
driving off. Release the control when the
engine achieves traction.
Replacing the brake linings
The rear brake linings must be replaced at a
workshop due to the design of the electric
parking brake - an authorised Volvo work-
shop is recommended.
15
For a car with the Keyless system: Press START/STOP ENGINE.
08 Starting and driving
08
295
Symbol Message Meaning/Action
Handbrake not
applied
A fault is preventing the parking brake from being applied:
Try to release and apply the brake.
If the fault persists after a few attempts:
Visit a workshop - an authorised Volvo workshop is recommended.
The message is also illuminated on cars with manual gearbox when the car is driven at low speed with the door
open in order to alert the driver that the parking brake may have been unintentionally disengaged.
Handbrake
Service
required
A fault has arisen:
Try to apply and release the brake.
If the fault persists after a few attempts:
Visit a workshop - an authorised Volvo workshop is recommended.
If the car has to be parked before a possible
fault has been rectified, then the wheels must
be turned as if parking on a hill and 1st gear
engaged (manual gearbox) or the gear selec-
tor must be in position P (automatic gearbox).
A text message can be acknowledged by
briefly pressing the OK button on the direc-
tion indicator stalk.
Related information
Foot brake (p. 290)
08 Starting and driving
08
296
* Option/accessory, for more information, see Introduction.
Driving in water
Fording means that the car is driven through a
water-covered roadway. Fording must be car-
ried out with great caution.
The car can be driven through water at a
maximum depth of 25 cm at a maximum
speed of 10 km/h. Extra caution should be
exercised when passing through flowing
water.
During driving in water, maintain a low speed
and do not stop the car. When the water has
been passed, depress the brake pedal lightly
and check that full brake function is achieved.
Water and mud for example can make the
brake linings wet resulting in delayed brake
function.
Clean the electric contacts of the electric
engine block heater* and trailer coupling
after driving in water and mud.
Do not let the car stand with water over
the sills for any long period of time - this
could cause electrical malfunctions.
IMPORTANT
Engine damage can occur if water enters
the air filter.
In depths greater than 25 cm, water could
enter the transmission. This reduces the
lubricating ability of the oils and shortens
the service life of these systems.
Damage to any component, engine, trans-
mission, turbocharger, differential or its
internal components caused by flooding,
hydrostatic locking or oil shortage, is not
covered by the warranty.
In the event of the engine stalling in water,
do not try restart - tow the car from the
water to a workshop - an authorised Volvo
workshop is recommended. Risk of engine
breakdown.
Related information
Recovery (p. 314)
Towing (p. 312)
Overheating
Under special conditions, for example hard
driving in hilly terrain and hot climate, there is
a risk that the engine and drive system may
overheat - in particular with a heavy load.
For information about overheating when driv-
ing with a trailer, see Driving with a trailer*
(p. 306).
Remove any auxiliary lamps from in front
of the grille when driving in hot climates.
If the temperature in the engine's cooling
system is too high then a warning symbol
is illuminated in the combined instrument
panel's information display and a text
message
High engine temperature
Stop safely is shown there - stop the car
in a safe way and allow the engine to run
at idling speed for several minutes in
order to cool down.
If the text message
High engine
temperature Turn off engine or Engine
coolant level low Stop safely
is shown
then the engine must be switched off
after stopping the car.
In the event of overheating in the gearbox
a built-in protection function is activated
which, amongst other things, illuminates
a warning symbol in the combined instru-
ment panel, and its display shows the
text message
Transmission hot Reduce
speed or Transmission hot Stop safely
Wait for cooling - follow the recommen-
dation given and lower the speed and
08 Starting and driving
08
297
stop the car in a safe way and allow the
engine to run at idling speed for a few
minutes in order to allow the gearbox to
cool down.
If the car overheats, the air conditioning
may be switched off temporarily.
Do not turn the engine off immediately
you stop after a hard drive.
NOTE
It is normal for the engine's cooling fan to
operate for a time after the engine has
been switched off.
Driving with open tailgate/boot lid
When driving with the tailgate open, toxic
exhaust fumes can be sucked into the car
through the cargo area.
WARNING
Do not drive with an open tailgate! Toxic
exhaust fumes could be drawn into the car
through the cargo area.
Related information
Loading (p. 155)
Overload - starter battery
The electrical functions in the car load the
starter battery (p. 371) to varying degrees.
Avoid using the key position II (p. 78) when
the engine is switched off. Instead use posi-
tion I - which uses less power.
Also, be aware of different accessories that
load the electrical system. Do not use func-
tions which use a lot of power when the
engine is switched off. Examples of such
functions are:
ventilation fan
headlamps
windscreen wiper
audio system (high volume).
If the starter battery voltage is low then the
combined instrument panel's information dis-
play shows the text
Low battery charge
Power save mode. The energy-saving func-
tion then shuts down certain functions or
reduces certain functions such as the ventila-
tion fan and/or audio system.
In which case, charge the starter battery
by starting the engine and then running it
for at least 15 minutes - starter battery
charging is more effective during driving
than running the engine at idling speed
while stationary.
08 Starting and driving
08
298
Before a long journey
Before a long journey, it makes good sense to
go through the following points:
Check that the engine is working normally
and that fuel consumption (p. 417) is nor-
mal.
Make sure that there are no leaks (fuel, oil
or other fluid).
Check all bulbs and tyre tread depths.
Carrying a warning triangle (p. 326) is a
legal requirement in certain countries.
Related information
Engine oil - checking and filling (p. 356)
Changing wheels - removing wheels
(p. 322)
Lamp replacement - general (p. 362)
Winter driving
For winter driving it is important to perform
certain checks in order to ensure that the car
can be driven safely.
Check the following in particular before the
cold season:
The engine coolant (p. 360) must contain
at least 50% glycol. This mixture protects
the engine against frost erosion down to
approximately –35 °C. To achieve opti-
mum antifreeze protection, different types
of glycol must not be mixed.
The fuel tank must be kept filled to pre-
vent condensation.
Engine oil viscosity is important. Oils with
lower viscosity (thinner oils) facilitate star-
ting in cold weather and also reduce fuel
consumption while the engine is cold. For
more information on suitable oils, see
Engine oil - adverse driving conditions
(p. 408).
IMPORTANT
Low viscosity oil must not be used for hard
driving or in hot weather.
The condition of the starter battery and
charge level must be inspected. Cold
weather places great demands on the
starter battery and its capacity is reduced
by the cold.
Use washer fluid (p. 371) to avoid ice
forming in the washer fluid reservoir.
To achieve optimum roadholding Volvo rec-
ommends using winter tyres on all wheels if
there is a risk of snow or ice.
NOTE
The use of winter tyres is a legal require-
ment in certain countries. Studded tyres
are not permitted in all countries.
Slippery driving conditions
Practise driving on slippery surfaces under
controlled conditions to learn how the car
reacts.
Related information
Winter driving (p. 298)
08 Starting and driving
08
}}
299
Fuel filler flap - Opening/closing
The fuel filler flap can be opened/closed as
follows:
Opening/closing the fuel filler flap
Open the fuel filler flap using the button on
the lighting panel - the flap opens when the
button is released.
In the combined instrument panel's
display the arrow on the symbol indi-
cates which side of the car the fuel cap is
located.
Close the fuel filler flap by pressing it in
until a click confirms that it is closed.
Related information
Filling up with fuel (p. 299)
Fuel filler flap - manual opening
The fuel filler flap can be opened manually
when electric opening from the passenger
compartment is not possible.
1. Open/remove the side hatch in the cargo
area (same side as fuel filler flap) and
locate the green cord with handle.
2. Pull the cord gently straight back until the
fuel filler flap folds out with a "click".
IMPORTANT
Pull the wire gently - minimal force is
required to disengage the hatch lock.
Related information
Filling up with fuel (p. 299)
Filling up with fuel
Important things to consider when refuelling.
Opening/closing the fuel cap
A certain overpressure may arise in the tank
in the event of high outside temperatures.
Open the cap slowly.
After refuelling - refit the cap and turn it
until one or more clicking sounds are
heard.
Filling up with fuel
Do not overfill the tank but fill until the
pump nozzle cuts out.
NOTE
Excess fuel in the tank can overflow in hot
weather.
||
08 Starting and driving
08
300
Filling with a fuel can
16
When filling with a fuel can, use the funnel
located under the floor hatch in the cargo
area.
Make sure you insert the funnel's pipe firmly
into the filler pipe. The filler pipe has an open-
able cover and the funnel's pipe must be slid
past the cover before filling can begin.
Related information
Fuel filler flap - manual opening (p. 299)
Fuel - handling (p. 300)
Fuel - handling
Fuel of a lower quality than that recom-
mended by Volvo must not be used as engine
power and fuel consumption is negatively
affected.
WARNING
Always avoid inhaling fuel vapour and get-
ting fuel splashes in the eyes.
In the event of fuel in the eyes, remove any
contact lenses and rinse the eyes in plenty
of water for at least 15 minutes and seek
medical attention.
Never swallow fuel. Fuels such as petrol,
bioethanol and mixtures of them and die-
sel are highly toxic and could cause per-
manent injury or be fatal if swallowed.
Seek medical attention immediately if fuel
has been swallowed.
WARNING
Fuel which spills onto the ground can be
ignited.
Switch off the fuel-driven heater before
starting to refuel.
Never carry an activated mobile phone
when refuelling. The ring signal could
cause spark build-up and ignite petrol
fumes, leading to fire and injury.
IMPORTANT
Mixing different types of fuel
17
or the use
of fuel that is not recommended invalid-
ates Volvo's warranties, as well as any
supplementary service agreements, and
this applies to all engines. NOTE: Does not
apply to cars with engines adapted for
driving on ethanol fuel (E85).
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combi-
nation with fuel grade are factors that
could affect the car's performance.
Related information
Economical driving (p. 305)
Fuel - diesel (p. 301)
Diesel particle filter (DPF) (p. 304)
Fuel consumption and CO2 emissions
(p. 417)
Fuel tank - volume (p. 416)
16
Only applies to cars with diesel engine.
17
Only applies to mixing petrol and ethanol fuel.
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
305
Economical driving
Driving economically means driving smoothly
while thinking ahead and adjusting your driv-
ing style and speed to the prevailing condi-
tions.
For lowest fuel consumption, activate
ECO (p. 288)*
19
.
Use the ECO Guide which indicates how
fuel-efficiently the car is being driven, see
Eco guide & Power guide* (p. 67).
Drive in the highest gear possible, adap-
ted to the current traffic situation and
road - lower engine speeds result in lower
fuel consumption. Use the gear indicator
(p. 269).
Avoid sudden unnecessary acceleration
and heavy braking.
High speed results in increased fuel con-
sumption - the wind resistance increases
with speed.
Do not run the engine to operating tem-
perature at idling speed, but rather drive
with a light load as soon as possible - a
cold engine consumes more fuel than a
warm one.
Drive with the correct air pressure in the
tyres and check this regularly - select
ECO tyre pressure for best results, see
Tyres - approved tyre pressures (p. 418).
Choice of tyres can affect fuel consump-
tion - seek advice on suitable tyres from a
dealer.
Remove unnecessary items from the car -
the greater the load the higher the con-
sumption.
Use engine braking to slow down, when it
can take place without risk to other road
users.
A roof load and ski box increase air resis-
tance, leading to higher consumption -
remove the load carriers when not in use.
Avoid driving with open windows.
For more information about Volvo Car Corpo-
ration's environmental philosophy, see Volvo
Car Corporation's environmental philosophy
(p. 21).
For more information about fuel consumption,
see Fuel consumption and CO2 emissions
(p. 417).
WARNING
Never switch off the engine while moving,
such as downhill, this deactivates impor-
tant systems such as the power steering
and brake servo.
Related information
Fuel - handling (p. 300)
Fuel consumption and CO2 emissions
(p. 417)
Fuel tank - volume (p. 416)
19
Only applies to cars with automatic gearbox.
08 Starting and driving
08
}}
* Option/accessory, for more information, see Introduction.
309
F
H
E
G
C
D
G017971
Dimensions, mounting points (mm)
A (V70) 1129
A (XC70) 1113
B (V70) 93
B (XC70) 80
C 855
D 428
E 112
F 346
G Side member
H Ball centre
Related information
Detachable towbar* - attachment/removal
(p. 309)
Detachable towbar* - storage (p. 308)
Driving with a trailer* (p. 306)
Detachable towbar* - attachment/
removal
The attachment/removal of the detachable
towbar is performed in the following way:
Attaching
G018928
Remove the protective cover by first
pressing in the catch
and then pulling
the cover straight back
.
G021487
Ensure that the mechanism is in the
unlocked position by turning the key
clockwise.
08 Starting and driving
08
* Option/accessory, for more information, see Introduction.
311
G021495
Safety cable.
WARNING
Take care to secure the trailer's safety
cable in the intended bracket.
Removing the towbar
Insert the key and turn it clockwise to the
unlocked position.
Push in the locking wheel and turn it
anticlockwise
until you hear a click.
Turn the locking wheel down fully, until it
comes to a stop. Hold it in this position
while pulling the towbar rearward and
upward.
WARNING
Secure the towbar safely if it is stored in
the car, see Detachable towbar* - storage
(p. 308).
G018929
Push the protective cover until it snaps
tight.
Related information
Detachable towbar* - storage (p. 308)
Detachable towbar* - specifications
(p. 308)
Driving with a trailer* (p. 306)
08 Starting and driving
08
312
Towing
During towing, one vehicle is towed by
another vehicle using a tow rope.
Find out the statutory maximum speed limit
for towing before towing begins.
1. Unlock the steering lock by inserting the
remote control key in the ignition switch
and giving a long press on the START/
STOP ENGINE button - key position II is
activated, see Key positions (p. 78) for
more information about key positions.
2. The remote control key must remain in
the ignition switch while the car is being
towed.
3. Keep the towline taut when the towing
vehicle reduces speed by holding your
foot gently pressed on the brake pedal -
thereby avoiding unnecessary jerking.
4. Be prepared to brake to stop.
WARNING
Check that the steering lock is
unlocked before towing.
The remote control key must be in key
position II - in position I all airbags are
deactivated.
Never remove the remote control key
from the ignition switch when the car
is being towed.
WARNING
The brake servo and power steering do not
work when the engine is switched off - the
brake pedal needs to be depressed
about 5 times more heavily and the steer-
ing is considerably heavier than normal.
Manual gearbox
Prior to towing:
Move gear lever into neutral and release
the parking brake.
Automatic gearbox Geartronic
Prior to towing:
Move the gear selector to position N and
release the parking brake.
IMPORTANT
Do not tow the vehicle at speeds
higher than 80 km/h or for distances in
excess of 80 km.
Note that the car must always be
towed with the wheels rolling forward.
Automatic gearbox Powershift
Models with the Powershift gearbox should
not be towed. If towing still has to take place,
the route must be as short as possible and
then with very low speed.
In the event of uncertainty as to whether or
not the car is equipped with Powershift trans-
mission, this can be verified by checking the
designation on the gearbox label under the
bonnet, see Type designations (p. 397). The
designation ”MPS6” means that it is
Powershift transmission - otherwise it is
Geartronic automatic transmission.
IMPORTANT
Avoid towing.
However, the car can be towed for a
short distance at low speed to move it
from a dangerous position - not further
than 10 km and not faster than
10 km/h. Note that the car must
always be towed with the wheels roll-
ing forward.
In the event of moving a longer dis-
tance than 10 km, the car must be
transported with the drive wheels
raised from the road - professional
recovery is recommended.
Prior to towing:
Move the gear selector to position N and
release the parking brake.
Jump starting
Do not tow the car to bump start the engine.
Use a donor battery if the starter battery is
08 Starting and driving
08
}}
313
discharged and the engine does not start, see
Jump starting with battery (p. 267).
IMPORTANT
The catalytic converter may be damaged
during attempts to tow-start the engine.
Related information
Towing eye (p. 313)
Recovery (p. 314)
Towing eye
The towing eye is screwed into a threaded
socket behind a cover on the right-hand side
of the bumper, front or rear.
Attaching the towing eye
Take out the towing eye that is located
under the floor hatch in the cargo area.
The cover for the towing eye's attach-
ment point is available in two variants
which must be opened in different ways:
Open the variant with a recess using a
coin or similar inserted in the recess,
turning it outwards. Then turn out the
cover completely and remove it.
The second variant has a marking
along one side or in a corner: Press the
marking with a finger and fold out the
opposite side/corner at the same time
using a coin or similar - the cover turns
around its axis and can then be
removed.
Screw the towing eye right in up to its
flange. Turn in the towing eye firmly e.g.
using the wheel wrench.
After use, unscrew the towing eye and
return it to its place.
Finish by refitting the cover onto the
bumper.
The towing eye may be used to pull the car
up onto a recovery vehicle with a flatbed plat-
form. The car's position and ground clear-
ance determine whether it is possible. If the
slope of the recovery vehicle's ramp is too
steep, or if the ground clearance under the
car is inadequate, then the car may be dam-
aged if you try to pull it up using the towing
eye. Raise the car using the recovery vehi-
cle's lifting device if necessary.
||
09 Wheels and tyres
09
324
* Option/accessory, for more information, see Introduction.
5. Screw together the towing eye with the
wheel wrench* until the stop position in
accordance with the following figure.
IMPORTANT
The towing eye must be screwed into all
threads in the wheel bolt wrench.
6. Remove the plastic caps from the wheel
bolts with the intended tool.
7. Loosen the wheel bolts ½-1 turn anti-
clockwise with the wheel wrench.
WARNING
Never position anything between the
ground and the jack, nor between the jack
and the car's jacking point.
8. There are two jacking points on each side
of the car. There is a recess in the plastic
cover at each point. Crank the foot of the
jack down so it is pressed squarely on the
ground.
IMPORTANT
The ground must be firm, smooth and
level.
9. Lift the car so that the wheel is free.
Remove the wheel bolts and lift off the
wheel.
WARNING
Never crawl under the car when it is raised
on the jack.
Passengers must leave the car when it is
raised on the jack. If a wheel must be
changed in a trafficked environment, pas-
sengers must stand in a safe place.
Related information
Changing wheels - fitting (p. 325)
Jack* (p. 327)
Warning triangle (p. 326)
Wheel bolts (p. 321)
09 Wheels and tyres
09
* Option/accessory, for more information, see Introduction.
325
Changing wheels - fitting
It is important that the procedure for fitting
the wheel is carried out correctly.
Installation
1. Clean the contact surfaces between
wheel and hub.
2. Put on the wheel. Tighten the wheel bolts
thoroughly.
3. Lower the car so that the wheels cannot
rotate.
4. Tighten the wheel bolts crosswise. It is
important that the wheel bolts are tight-
ened properly. Tighten to 140 Nm. Check
the torque with a torque wrench.
5. Refit any full wheel covers.
NOTE
After a tyre has been inflated, always
refit the dust cap in order to avoid
damage to the valve from gravel, dirt,
etc.
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
NOTE
The wheel cover outlet for the valve must
be positioned over the valve on the wheel
rim during fitting.
NOTE
The car's regular jack is designed only for
use occasionally and for a short time, such
as when changing a wheel with a punc-
tured tyre, switching between summer
tyres and winter tyres, etc. Only the jack
belonging to the specific model is to be
used to jack up the car. If the car is to be
jacked up more often, or for a longer time
than is required just to change a wheel,
use of a garage jack is recommended. In
this instance, follow the instructions for
use that come with the equipment.
Related information
Changing wheels - removing wheels
(p. 322)
Jack* (p. 327)
Warning triangle (p. 326)
Wheel bolts (p. 321)
09 Wheels and tyres
09
326
* Option/accessory, for more information, see Introduction.
Warning triangle
The warning triangle is used to warn other
road users of a stationary vehicle.
Storage and folding up
Lift the floor hatch and take out the warn-
ing triangle.
Take the warning triangle from the case,
fold out and assemble the two loose
sides.
Fold out the warning triangle's support
legs.
Follow the regulations for the use of a warn-
ing triangle. Position the warning triangle in a
suitable place with regard to traffic.
Ensure the warning triangle and its case are
properly secured in the cargo area after use.
NOTE
If the car has been locked with privacy
locking then the boot lid/tailgate and floor
hatch cannot be opened, see Privacy lock-
ing* (p. 172).
Tools
Amongst other things, the car contains towing
eye, jack* and wheel bolt wrench*.
Located under the cargo area floor are the
car's towing eye, jack* and wheel wrench*.
There is also space for the sleeve for the
lockable wheel bolts.
Related information
Emergency puncture repair* (p. 335)
Towing eye (p. 313)
Changing wheels - removing wheels
(p. 322)
Wheel bolts (p. 321)
Jack* (p. 327)
09 Wheels and tyres
09
* Option/accessory, for more information, see Introduction.
327
Jack*
A jack is used to raise the car, e.g. when
changing the tyres.
The original jack should only be used for
changing to the spare wheel. The jack's
thread must always be well greased.
Tools - returning into place
The tools and jack* must be returned to their
correct places after use. The jack needs to be
cranked together to the correct position in
order to have space.
The foam block and spare wheel are replaced
in the reverse order to taking out.
Note that there is an arrow on the upper foam
block. It must point forwards in the car.
IMPORTANT
The tools and jack* must be stored in the
intended location in the car's cargo area
when not in use.
NOTE
If the floor hatch in the cargo area floor is
not closed then privacy locking does not
work.
Related information
Warning triangle (p. 326)
Emergency puncture repair* (p. 335)
First aid kit*
The first aid box contains first aid equipment.
G018253
A case with first aid equipment is located
under the floor in the cargo area.
NOTE
If the car has been locked with privacy
locking then the boot lid/tailgate and floor
hatch cannot be opened, see Privacy lock-
ing* (p. 172).
09 Wheels and tyres
09
328
* Option/accessory, for more information, see Introduction.
Tyre pressure monitoring*
3
Tyre pressure monitoring warns the driver
when the pressure is too low in one or more
of the car's tyres. For certain markets the tyre
pressure monitoring is standard in accord-
ance with legal requirements.
There are two systems for tyre pressure
monitoring, TPMS (Tyre Pressure Monitoring
System) and TM (Tyre Monitor). In the event
of uncertainty about which system the car
has, open the menu system MY CAR and
search for the car's settings:
The
Tyre pressure menu is used if it is
TPMS, see Tyre pressure monitoring sys-
tem (TPMS)* - general (p. 328)
The
Tyre monitoring menu is used if it is
TM, see Tyre pressure monitoring (TM)*
(p. 333).
The system does not replace normal tyre
maintenance.
Related information
Tyre pressure monitoring system (TPMS)*
- general (p. 328)
Tyre pressure monitoring (TPMS)* - adjust
(recalibration) (p. 329)
Tyre pressure monitoring (TPMS)* - recti-
fying low tyre pressure (p. 333)
Tyre pressure monitoring (TPMS)* - acti-
vate/deactivate (p. 331)
Tyre pressure monitoring (TPMS)* - rec-
ommendations (p. 331)
Tyre pressure monitoring (TPMS)* - drive-
able punctured tyres* (p. 332)
Tyre pressure monitoring system
(TPMS)*
10
- general
Tyre pressure monitoring (TPMS) (Tyre
Pressure Monitoring System)* warns the
driver when the pressure is too low in one or
more of the car's tyres.
Tyre pressure monitoring uses sensors
located inside the air valve in each wheel.
When the car is driven at about 30 km/h the
system detects the tyre pressure. If the pres-
sure is too low then a warning lamp
illumi-
nates in the combined instrument panel and
one of the following messages is shown:
Tyre pressure low Check front right
tyre
Tyre pressure low Check front left
tyre
Tyre pressure low Check rear right
tyre
Tyre pressure low Check rear left tyre
Tyre needs air now Check front right
tyre
Tyre needs air now Check front left
tyre
Tyre needs air now Check rear right
tyre
3
Standard in certain markets.
09 Wheels and tyres
09
}}
* Option/accessory, for more information, see Introduction.
329
Tyre needs air now Check rear left
tyre
Tyre pressure system Service
required
Both factory-fitted and optional wheels can
be equipped with TPMS sensors in the
valves.
If wheels without TPMS sensors are used or if
a sensor has failed then
Tyre pressure
system Service required will be shown.
Always check the system after changing a
wheel in order to ensure that replacement
wheels work with the system.
For information on the correct tyre pressure,
see Tyres - air pressure (p. 318).
The system does not replace normal tyre
maintenance.
IMPORTANT
If a fault occurs in the TPMS system the
warning lamp
in the combined instru-
ment panel will flash for approx. 1 minute
and then illuminate with a constant glow. A
message is also shown in the combined
instrument panel.
Related information
Tyre pressure monitoring (TPMS)* - adjust
(recalibration) (p. 329)
Tyre pressure monitoring (TPMS)* - recti-
fying low tyre pressure (p. 333)
Tyre pressure monitoring (TPMS)* - acti-
vate/deactivate (p. 331)
Tyre pressure monitoring (TPMS)* - rec-
ommendations (p. 331)
Tyre pressure monitoring (TPMS)* - drive-
able punctured tyres* (p. 332)
Tyre pressure monitoring (TPMS)*
16
-
adjust (recalibration)
Tyre pressure monitoring (TPMS) (Tyre
Pressure Monitoring System)* warns the
driver when the pressure is too low in one or
more of the car's tyres.
TPMS can be adjusted in order to follow Vol-
vo's tyre pressure recommendations (p. 318),
such as when driving with a heavy load, for
example.
NOTE
The car must be stationary when calibra-
tion is started.
Settings are made using the centre console's
controls, see MY CAR (p. 113).
1. Inflate the tyres to the desired pressure in
accordance with the tyre pressure label
on the driver's side door pillar (between
front and rear doors).
2. Start the engine.
3. Select the menu system MY CAR to open
the menus for tyre pressure.
4.
Select
Calibrate tyre pressure and
press OK.
10
Standard in certain markets.
16
Standard in certain markets.
||
09 Wheels and tyres
09
330
* Option/accessory, for more information, see Introduction.
5. Drive for at least 10 minutes at a speed of
at least 30 km/h.
> Calibration is performed automatically
following initialisation by the driver.
The system provides no confirmation
when the calibration is complete.
The new reference values apply until steps
1-5 are carried out again.
Related information
Tyre pressure monitoring* (p. 328)
Tyres - air pressure (p. 318)
Tyre pressure monitoring system
(TPMS)*
18
- status
Tyre pressure monitoring (TPMS) (Tyre
Pressure Monitoring System)* warns the
driver when the pressure is too low in one or
more of the car's tyres.
System and tyre status
The current status of the system and the tyres
can be checked, see MY CAR (p. 113).
1. Select the menu system MY CAR to open
the menus for tyre monitoring.
2.
Select
Tyre pressure.
The status is colour-coded for each tyre in
accordance with the following:
All-green: the system is operating nor-
mally and the tyre pressure in all tyres is
slightly above the recommended level.
Yellow wheel: corresponding tyre's pres-
sure is too low.
Red wheel: corresponding tyre's pressure
is very low.
All wheels grey: the system is temporarily
unavailable. It may be necessary to drive
the car for a few minutes at a speed
above 30 km/h before the system
becomes active again.
All wheels grey and the message
Tyre
pressure system Service required: an
error has occurred in the system. Contact
a Volvo dealer or workshop.
Clearing warning messages
If a tyre pressure message has been shown
and the TPMS warning lamp has been illumi-
nated:
1. Check the tyre pressure on the indicated
tyre/tyres with a tyre pressure gauge.
2. Inflate the tyre/tyres to the correct pres-
sure in accordance with the tyre pressure
label on the driver's side door pillar
(between front and rear doors).
3. In some cases it may be necessary to
drive the car for a few minutes at a speed
above 30 km/h in order to clear the warn-
ing text. At which point, the TPMS warn-
ing lamp is extinguished as well.
18
Standard in certain markets.
09 Wheels and tyres
09
}}
* Option/accessory, for more information, see Introduction.
331
NOTE
The TPMS system uses a so-called
compensated pressure value, based
on both tyre temperature and ambient
temperature. This means that the tyre
pressure may differ slightly from the
recommended pressures listed on the
tyre pressure label on the driver's side
door pillar (between front and rear
doors). For this reason, it may be nec-
essary to inflate the tyres to a slightly
higher pressure in order to clear a low
tyre pressure message.
To avoid incorrect tyre pressure, the
pressure should be checked on cold
tyres. "Cold tyres" means the tyres are
the same temperature as the ambient
temperature (approx. 3 hours after the
car has been driven). After a few kilo-
metres of driving, the tyres warm up
and the pressure increases.
WARNING
Incorrect tyre pressure may lead to
tyre failure, which could result in the
driver losing control of the car.
The system cannot indicate sudden
tyre damage in advance.
Tyre pressure monitoring (TPMS)*
19
-
activate/deactivate
Tyre pressure monitoring (TPMS) (Tyre
Pressure Monitoring System)* warns the
driver when the pressure is too low in one or
more of the car's tyres.
NOTE
The car must be stationary when the tyre
pressure monitoring is activated/deacti-
vated.
Settings are made using the centre console's
controls, see MY CAR (p. 113).
1. Start the engine.
2. Select the menu system MY CAR to open
the menus for tyre pressure.
3.
Select
Tyre pressure and press OK.
>
An
X is shown in the information dis-
play if the system is activated, the
option disappears if the system is
deactivated
20
.
Related information
Tyre pressure monitoring* (p. 328)
Tyre pressure monitoring (TPMS)*
22
-
recommendations
Tyre pressure monitoring (TPMS) (Tyre
Pressure Monitoring System)* warns the
driver when the pressure is too low in one or
more of the car's tyres.
Volvo recommends that TPMS sensors
are fitted to all wheels on the car, includ-
ing winter wheels.
Volvo recommends that sensors are not
moved between different wheels.
The spare wheel is not equipped a with
TPMS sensor.
If the spare wheel or a wheel without a
TPMS sensor is used, the error message
Tyre pressure system Service
required
will be shown in the combined
instrument panel.
If a wheel has been changed, or if the
TPMS sensor has been moved to another
wheel then the seal, nut and valve core
must be replaced.
When TPMS sensors are installed, the car
should be switched off for at least 15
minutes otherwise an error message will
be shown in the combined instrument
panel.
19
Standard in certain markets.
20
Only in certain markets.
22
Standard in certain markets.
||
09 Wheels and tyres
09
332
* Option/accessory, for more information, see Introduction.
WARNING
When inflating a tyre equipped with TPMS,
hold the nozzle of the pump directly
against the valve to avoid damaging the
valve.
NOTE
After a tyre has been inflated, always
refit the dust cap in order to avoid
damage to the valve from gravel, dirt,
etc.
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
NOTE
If you want to change the tyre dimension
then the TPMS system must be reconfig-
ured. For further information - contact a
Volvo dealer.
Related information
Tyre pressure monitoring* (p. 328)
Tyre pressure monitoring (TPMS)*
24
-
driveable punctured tyres*
If SST (Self Supporting run flat Tires)* is
selected, the car is also equipped with TPMS
(p. 328).
This type of tyre has a specially reinforced
side wall that makes continued driving possi-
ble to a limited extent despite the tyre losing
all or some of its pressure. These tyres are fit-
ted on a special rim. (Normal tyres can also
be fitted to this rim.)
If an SST tyre loses tyre pressure then the
yellow TPMS lamp in the combined instru-
ment panel illuminates and a message is
shown in the information display. If this
occurs, reduce speed to max. 80 km/h. The
tyre must be replaced as soon as possible.
Drive carefully, in some cases it can be diffi-
cult to see which tyre is faulty. In order to
establish which tyre needs attention, check
all four tyres.
WARNING
Only people with knowledge of SST tyres
should fit them.
SST tyres must only be fitted together with
TPMS.
After an error message about low tyre
pressure has been shown, do not drive
faster than 80 km/h.
Maximum mileage before tyre replacement
is 80 km.
Avoid hard driving such as sudden braking
or turning.
SST tyres must be replaced if they are
damaged or punctured.
Related information
Tyre pressure monitoring* (p. 328)
24
Standard in certain markets.
09 Wheels and tyres
09
}}
* Option/accessory, for more information, see Introduction.
337
Related information
Emergency puncture repair kit* - location
(p. 336)
Emergency puncture repair kit* - sealant
(p. 340)
Emergency puncture repair* (p. 335)
Emergency puncture repair* -
operation
Emergency puncture repair, where the emer-
gency puncture repair kit (TMK - Temporary
Mobility Kit) is used to seal a puncture and
check and adjust the tyre pressure (p. 418).
Emergency puncture repair
For information on the function of the parts, see
Emergency puncture repair kit* - overview
(p. 336).
1. Detach the label for maximum permitted
speed (which is fitted on one side of the
compressor) and affix it to the steering
wheel.
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has
been used. Volvo recommends that you
visit an authorised Volvo workshop for
inspection of the sealed tyre (maximum
driving distance is 200 km). The staff there
can determine whether or not the tyre can
be repaired or if it needs to be replaced.
WARNING
The sealing fluid can irritate the skin. In the
case of contact with skin, wash away the
fluid with soap and water.
2. Check that the switch is in position 0 and
locate the cable and the air hose.
NOTE
Do not break the bottle's seal before use.
The seal is broken automatically when the
bottle is screwed in.
3. Unscrew the orange cap and unscrew the
bottle's stopper.
||
09 Wheels and tyres
09
338
* Option/accessory, for more information, see Introduction.
4. Screw the bottle into its holder.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
5. Connect the hose from the compressor to
the valve.
6. Plug the cable into the 12 V socket and
start the car.
NOTE
If the compressor is connected to one of
the two 12 V sockets in the tunnel console
then no other current consumer may be
connected to the other one.
WARNING
Do not leave children in the car without
supervision when the engine is running.
7. Flick the switch to position I.
WARNING
Never stand next to the tyre when the
compressor is running. If cracks or
unevenness arise then the compressor
must be switched off immediately. The
journey should not be continued. Contact-
ing an authorised tyre centre is recom-
mended.
NOTE
When the compressor starts, the pressure
can increase up to 6 bar but the pressure
drops after approximately 30 seconds.
8. Inflate the tyre for 7 minutes.
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
9. Switch off the compressor to check the
pressure on the pressure gauge. Mini-
mum pressure is 1.8 bar and maximum
3.5 bar. (Release air with the pressure
reducing valve if the tyre pressure is too
high.)
WARNING
If the pressure is below 1.8 bar then the
hole in the tyre is too big. The journey
should not be continued. Contacting an
authorised tyre centre is recommended.
10. Switch off the compressor and unplug the
cable from the 12 V socket.
11. Detach the hose from the tyre valve and
fit the valve cap.
12. As soon as possible, drive approximately
3 km at a maximum speed of 80 km/h so
that the sealing fluid can seal the tyre.
Related information
Emergency puncture repair* (p. 335)
Emergency puncture repair* - rechecking
(p. 339)
Emergency puncture repair kit* - overview
(p. 336)
09 Wheels and tyres
09
* Option/accessory, for more information, see Introduction.
339
Emergency puncture repair* -
rechecking
Emergency puncture repair, where the emer-
gency puncture repair kit (TMK - Temporary
Mobility Kit) is used to seal a puncture and
check and adjust the tyre pressure (p. 418).
Check tyre pressure
1. Reconnect the equipment.
2. Read the tyre pressure on the pressure
gauge.
If it is below 1.3 bar
30
then the tyre is
insufficiently sealed. The journey
should not be continued. Contact a
tyre centre.
If the tyre pressure is higher than 1.3
bar
30
, the tyre must be inflated to the
pressure specified in accordance with
the tyre pressure table, see Tyres -
approved tyre pressures (p. 418).
Release air using the pressure reduc-
ing valve if the tyre pressure is too
high.
WARNING
Do not unscrew the bottle, it is equipped
with a reverse catch to prevent leakage.
3. Make sure the compressor is switched
off. Detach the air hose and cable.
Fit the valve cap.
NOTE
After a tyre has been inflated, always
refit the dust cap in order to avoid
damage to the valve from gravel, dirt,
etc.
Only use plastic dust caps. Metal dust
caps can rust and become difficult to
unscrew.
NOTE
The sealing fluid bottle and the hose must
be replaced after use. Volvo recommends
that this replacement is performed by an
authorised Volvo workshop.
WARNING
Check the tyre pressure regularly.
Volvo recommends that you drive to the near-
est authorised Volvo workshop for the
replacement/repair of the damaged tyre.
Advise the workshop that the tyre contains
sealing fluid.
WARNING
You should not drive faster than 80 km/h
after the emergency tyre repair kit has
been used. Volvo recommends that you
visit an authorised Volvo workshop for
inspection of the sealed tyre (maximum
driving distance is 200 km). The staff there
can determine whether or not the tyre can
be repaired or if it needs to be replaced.
Related information
Emergency puncture repair* (p. 335)
Emergency puncture repair* - operation
(p. 337)
Emergency puncture repair kit* - overview
(p. 336)
30
1 bar = 100 kPa.
09 Wheels and tyres
09
340
* Option/accessory, for more information, see Introduction.
Emergency puncture repair kit* -
inflating the tyres
The car's original tyres can be inflated using
the compressor in the emergency puncture
repair kit (p. 336).
1. The compressor must be switched off.
Make sure that the switch is in position 0
and locate the cable and air hose.
2. Unscrew the wheel's dust cap and screw
in the air hose valve connection to the
bottom of the thread on the tyre's air
valve.
WARNING
Inhaling car exhaust fumes could result in
danger to life. Never leave the engine run-
ning in sealed areas or areas that lack suf-
ficient ventilation.
WARNING
Do not leave children in the car without
supervision when the engine is running.
3. Connect the cable to one of the car's
12 V sockets and start the car.
4. Start the compressor by flicking the
switch to position I.
IMPORTANT
Risk of overheating. The compressor must
not run for more than 10 minutes.
5. Inflate the tyre to the pressure specified in
accordance with the tyre pressure table,
see Tyres - approved tyre pressures
(p. 418). Release air using the pressure
reducing valve if the tyre pressure is too
high.
6. Switch off the compressor. Detach the air
hose and cable.
7. Refit the dust cap.
Related information
Emergency puncture repair* (p. 335)
Emergency puncture repair kit* - overview
(p. 336)
Emergency puncture repair* - rechecking
(p. 339)
Emergency puncture repair kit* -
sealant
The container (bottle) with the emergency
puncture repair kit (p. 336) contains sealant
and it can be replaced.
Replace the bottle when the expiration date
has passed. Treat the old bottle as environ-
mentally hazardous waste.
WARNING
The bottle contains 1.2-Ethanol and natu-
ral rubber-latex.
Harmful if ingested. Could result in allergic
reaction in the event of skin contact.
Avoid contact with the skin and eyes.
Store out of the reach of children.
Related information
Emergency puncture repair* (p. 335)
||
09 Wheels and tyres
09
342
Country/Area
Brazil
Ukraine
09 Wheels and tyres
09
}}
343
Country/Area
Israel
||
09 Wheels and tyres
09
344
Declaration of Conformity (Declaration of Conformity)
Country/
Area
Countries in
the EU:
Exporting country: Germany
Manufacturer: Continental Automotive GmbH
Type of equipment: TPMS unit
09 Wheels and tyres
09
}}
345
Country/
Area
Czech Repub-
lic:
Continental tímto prohlašuje, že tento Radio Transmitter je ve shodě se základními požadavky a dalšími příslušnými
ustanoveními směrnice 1999/5/ES.
Denmark: Undertegnede Continental erklærer herved, at følgende udstyr Radio Transmitter overholder de væsentlige krav og øvrige
relevante krav i direktiv 1999/5/EF.
Germany: Hiermit erklärt Continental, dass sich das Gerät Radio Transmitter in Übereinstimmung mit den grundlegenden Anforderungen
und den übrigen einschlägigen Bestimmungen der Richtlinie 1999/5/EG befindet.
Estonia: Käesolevaga kinnitab Continental seadme Radio Transmitter vastavust direktiivi 1999/5/EÜ põhinõuetele ja nimetatud
direktiivist tulenevatele teistele asjakohastele sätetele.
UK Hereby, Continental declares that this Radio Transmitter is in compliance with the essential requirements and other relevant
provisions of Directive 1999/5/EC.
Spain: Por medio de la presente Continental declara que el Radio Transmitter cumple con los requisitos esenciales y cualesquiera
otras disposiciones aplicables o exigibles de la Directiva 1999/5/CE.
Greece: ΜΕ ΗΝ ΠΑΡΟΣΑ Continental ΗΛΩΝΕ Ο Radio Transmitter ΣΜΜΟΡΦΩΝΕΑ ΠΡΟΣ Σ ΟΣΩΕΣ ΑΠΑΗΣΕΣ Α
Σ ΛΟΠΕΣ ΣΧΕΕΣ ΑΑΞΕΣ ΗΣ ΟΗΑΣ 1999/5/Ε.
France: Par la présente Continental déclare que l'appareil Radio Transmitter est conforme aux exigences essentielles et aux autres
dispositions pertinentes de la directive 1999/5/CE.
Italy: Con la presente Continental dichiara che questo Radio Transmitter è conforme ai requisiti essenziali ed alle altre disposizioni
pertinenti stabilite dalla direttiva 1999/5/CE.
Latvia: Ar šo Continental deklarē, ka Radio Transmitter atbilst Direktīvas 1999/5/EK būtiskajām prasībām un citiem ar to saistītajiem
noteikumiem.
Lithuania: Šiuo Continental deklaruoja, kad šis Radio Transmitter atitinka esminius reikalavimus ir kitas 1999/5/EB Direktyvos nuostatas.
Netherlands: Hierbij verklaart Continental dat het toestel Radio Transmitter in overeenstemming is met de essentiële eisen en de andere
relevante bepalingen van richtlijn 1999/5/EG.
||
09 Wheels and tyres
09
346
* Option/accessory, for more information, see Introduction.
Country/
Area
Malta: Hawnhekk, Continental, jiddikjara li dan Radio Transmitter jikkonforma mal-ħtiġijiet essenzjali u ma provvedimenti oħrajn
relevanti li hemm fid-Dirrettiva 1999/5/EC.
Hungary: Alulírott, Continental nyilatkozom, hogy a Radio Transmitter megfelel a vonatkozó alapvetõ követelményeknek és az
1999/5/EC irányelv egyéb elõírásainak.
Poland: Niniejszym Continental oświadcza, że Radio Transmitter jest zgodny z zasadniczymi wymogami oraz pozostałymi stosownymi
postanowieniami Dyrektywy 1999/5/EC.
Portugal: Continental declara que este Radio Transmitter está conforme com os requisitos essenciais e outras disposições da Directiva
1999/5/CE.
Slovenia: Continental izjavlja, da je ta Radio Transmitter v skladu z bistvenimi zahtevami in ostalimi relevantnimi določili direktive
1999/5/ES.
Slovakia: Continental týmto vyhlasuje, že Radio Transmitter spĺňa základné požiadavky a všetky príslušné ustanovenia Smernice
1999/5/ES.
Finland: Continental vakuuttaa täten että Radio Transmitter tyyppinen laite on direktiivin 1999/5/EY oleellisten vaatimusten ja sitä
koskevien direktiivin muiden ehtojen mukainen.
Sweden: Härmed intygar Continental att denna Radio Transmitter står I överensstämmelse med de väsentliga egenskapskrav och övriga
relevanta bestämmelser som framgår av direktiv 1999/5/EG.
Iceland: Hér með lýsir Continental yfir því að Radio Transmitter er í samræmi við grunnkröfur og aðrar kröfur, sem gerðar eru í tilskipun
1999/5/EC.
Norway: Continental erklærer herved at utstyret Radio Transmitter er i samsvar med de grunnleggende krav og øvrige relevante krav i
direktiv 1999/5/EF.
Related information
Tyre pressure monitoring* (p. 328)
MAINTENANCE AND SERVICE
10 Maintenance and service
10
348
* Option/accessory, for more information, see Introduction.
Volvo service programme
To keep the car as safe and reliable as possi-
ble, follow the Volvo service programme as
specified in the Service and Warranty Booklet.
Volvo recommends engaging an authorised
Volvo workshop to perform the service and
maintenance work. Volvo workshops have the
personnel, special tools and service literature
to guarantee the highest quality of service.
IMPORTANT
For the Volvo warranty to apply, check and
follow the instructions in the Service and
Warranty Booklet.
Related information
Climate control system - fault tracing and
repair (p. 362)
Book service and repair*
1
Manage service, repair and booking informa-
tion directly in your Internet-connected car.
This service provides a convenient way to
book a service and workshop visit directly in
the car. Car information is sent to your dealer,
who can prepare the workshop visit. The
dealer will contact you to schedule an
appointment time. For certain markets, the
system reminds you of a scheduled appoint-
ment time as it approaches and the naviga-
tion system
2
can also guide you to the work-
shop when the time comes.
Before the service can be used
Volvo ID and my profile
Register a Volvo ID. For more information
and how to create a Volvo ID, see Volvo
ID (p. 20).
Log in to the web portal My Volvo, go to
your profile and carry out the following:
1. Check that the car is connected to your
profile.
2. Check that your contact information is
correct.
3. Select the Volvo dealer you want to con-
tact for service and repair.
4. Select preferred communication channel
(SMS or phone). Booking information is
always sent to the car and to you via
email.
Prerequisite for booking from car
To send and receive booking information
to and from the car, the car must be con-
nected to the Internet, see Sensus Info-
tainment supplement for information on
how to connect the car to the Internet.
Since the booking information is sent
over your private phone subscription, you
will be asked whether you want to send
the information. The question is asked
once and then applies to the selected
connection for a limited time.
For the service to work and for the sys-
tem to communicate via the car's screen,
notifications/pop-up messages must be
accepted. In the normal view for the MY
CAR source, press OK/MENU and then
Service & repair Display
notifications
.
Using the service
All menus and settings are accessed from the
normal view in MY CAR by pressing OK/
MENU and then
Service & repair.
When it is time for service, and in some cases
when the car is in need of repair, this is noti-
1
Applies to certain markets.
2
Applies to Sensus Navigation.
10 Maintenance and service
10
}}
349
fied in the combined instrument panel (p. 63)
and via a pop-up menu in the screen.
Service message in the screen.
Meaning of the answer options in the
screen's pop-up menu:
Yes - A booking enquiry is sent to your
dealer who then comes back with a
booking proposal. The service lamp and
service message in the combined instru-
ment panel are extinguished.
No - No more pop-up messages will be
shown in the screen. The message in the
combined instrument panel remains. After
this option has been selected, it is possi-
ble to start the manual booking in the car,
see below.
Postpone - The pop-up menu is shown
the next time the car is started.
Book a service or repair manually
1
1. Press the MY CAR button in the centre
console and select
Service & repair
Dealer information Request service
or repair
.
> Vehicle data is sent automatically to
your dealer.
2. The dealer sends a booking proposal to
the car.
3. Accept or request a new booking pro-
posal.
After the booking has been accepted the
booking information is stored in the car, see
My bookings. The car will automatically com-
municate with you via the screen by means of
reminders about the booking and guide you
to the workshop visit.
You can also book a workshop visit via My
Volvo. Go to "My bookings" and select
"Update" in order to gain access to bookings
from My Volvo.
My bookings
1
Show booking information in the car's screen.
Accept or request a new booking proposal.
Select Service & repair My bookings.
Call the dealer
1
With a Bluetooth
®
phone connected to the
car, you can call your dealer. For connecting
the phone, see Sensus Infotainment supple-
ment.
Select Service & repair Dealer
information
Call dealer.
Using the navigation system
1,
2
Enter your workshop as destination or way-
point in the navigation system.
Select Service & repair Dealer
information
Set single destination.
Select Service & repair Dealer
information
Add as waypoint.
Sending vehicle data
1
Vehicle data is sent to a central Volvo data-
base (not your dealer) from which Volvo deal-
ers can retrieve vehicle information using the
car's identification number (VIN
3
). The num-
ber is printed in the car's service and war-
ranty booklet, alternatively inside the wind-
screen's bottom left-hand corner.
Select Service & repair Send car
data
.
1
Applies to certain markets.
2
Applies to Sensus Navigation.
3
Vehicle Identification Number
||
10 Maintenance and service
10
350
Booking information and vehicle data
When you decide to book a service from your
car, the booking information and vehicle data
will be sent. Vehicle data information consists
of a number of signals within the following
areas:
Service requirement.
Function status.
Fluid levels.
Mileage (distance).
The car's vehicle identification number
(VIN
3
).
The car's software version.
Related information
Volvo ID (p. 20)
3
Vehicle Identification Number
10 Maintenance and service
10
}}
351
Raising the car
When raising the car it is important that the
jack or lifting arms are fitted in the intended
points on the car's underbody.
NOTE
Volvo recommends only using the jack that
belongs to the car model in question. If a
jack is selected other than the one recom-
mended by Volvo, follow the instructions
supplied with the equipment.
||
10 Maintenance and service
10
352
Jacking points (arrows) for the jack that belongs to the car and lifting points (marked in red).
If the car is raised with a front workshop jack
then this must be positioned under one of the
four lifting points furthest in under the car. If
the car is raised with a rear workshop jack
then it must be positioned under one of the
lifting points. Ensure that the workshop jack
is positioned so that the car cannot slide off
the jack. Always use axle stands or similar.
If the car is raised with a two-pillar workshop
lift then the front and rear lifting arms can be
positioned under the outer lifting points (jack-
ing points). Alternatively, the inner lifting
points can be used at the front.
Related information
Changing wheels - removing wheels
(p. 322)
10 Maintenance and service
10
}}
353
Bonnet - opening and closing
The bonnet can be opened when the handle
by the pedals has been pulled backwards,
and the lock by the grille has been moved to
the left.
G010951
Pull the handle by the pedals. You will
hear when the catch releases.
Move the catch to the left and open the
bonnet. (The catch hook is located
between the headlamp and grille, see
illustration.)
WARNING
Check that the bonnet locks properly when
closed.
Related information
Engine compartment - checking (p. 355)
Engine compartment - overview (p. 353)
Engine compartment - overview
The overview shows normal checking points.
Engine compartment 4 cyl. 2.0 l
4
The appearance of the engine compartment may
differ depending on engine variant.
Filling engine oil
Coolant expansion tank
Power steering fluid reservoir
Radiator
Reservoir for brake and clutch fluid
(located on the driver's side)
Starter battery
Relay and fuse box
4
Does not apply to the B4204T7 engine - see instead the following heading "Engine compartment except 4-cyl. 2.0 l".
10 Maintenance and service
10
}}
355
Engine compartment - checking
Some oils and fluids should be checked at
regular intervals.
Regular checking
Check the following oils and fluids at regular
intervals, e.g. when refuelling:
Coolant
Engine oil
Power steering fluid
Washer fluid
WARNING
Remember that the radiator fan (located at
the front of the engine compartment,
behind the radiator) may start automati-
cally some after the engine has been
switched off.
Always have the engine cleaned by a
workshop - an authorised Volvo workshop
is recommended. There is a risk of fire if
the engine is hot.
Related information
Bonnet - opening and closing (p. 353)
Engine compartment - overview (p. 353)
Coolant - level (p. 360)
Engine oil - checking and filling (p. 356)
Power steering fluid - level (p. 361)
Washer fluid - filling (p. 371)
Engine oil - general
An approved engine oil must be used in order
that the recommended service intervals can
be applied.
Volvo recommends:
When driving under adverse conditions, see
Engine oil - adverse driving conditions
(p. 408).
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard
to service life, starting characteristics, fuel
consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service inter-
vals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
Volvo Car Corporation disclaims all war-
ranty liability if engine oil of the prescribed
grade and viscosity is not used.
Volvo recommends that oil changes are
carried out at an authorised Volvo work-
shop.
Volvo uses different systems for warning of
low/high oil level or low oil pressure. Certain
engine variants have an oil pressure sensor,
and then the combined instrument panel's
warning symbol for low oil pressure is used.
Other variants have an oil level sensor, when
the driver is informed via the instrument's
warning symbol and display texts. Cer-
||
10 Maintenance and service
10
356
tain variants have both systems. Contact a
Volvo dealer for more information.
Change the engine oil and oil filter in accord-
ance with the intervals specified in the Serv-
ice and Warranty Booklet.
Using oil of a higher than specified grade is
permitted. If the car is driven in adverse con-
ditions, Volvo recommends using an oil of a
higher grade; see Engine oil - adverse driving
conditions (p. 408).
For filling capacities, see Engine oil - grade
and volume (p. 409).
Related information
Engine oil - checking and filling (p. 356)
Engine oil - checking and filling
The oil level is checked on certain engine vari-
ants with the electronic oil level sensor, on
other engine variants with the oil dipstick.
Engine with oil dipstick
7
G021734
Dipstick and filler pipe.
Checking the oil level in a new car is espe-
cially important before the first scheduled oil
change.
Volvo recommends checking the oil level
every 2 500 km. The most accurate measure-
ments are made on a cold engine before star-
ting. The measurement will be inaccurate if
taken immediately after the engine is
switched off. The dipstick will indicate that
the level is too low because the oil has not
had time to flow down into the oil sump.
G021737
The oil level must be between the MIN and MAX
marks.
7
Does not apply to the 4-cyl. 2.0 litre or 5-cyl. diesel, which have electronic oil level sensor. However, does apply to the B4204T7 engine.
10 Maintenance and service
10
}}
357
Measurement and filling if required
1. Ensure that the car is level. After switch-
ing off the engine it is important to wait
5 minutes to allow the oil time to run back
to the sump.
2. Pull up and wipe the dipstick.
3. Re-insert the dipstick.
4. Pull it out and check the level.
5. If the level is close to MIN then 0.5 litres
should be added. If the level is signifi-
cantly below, then an additional amount
is required.
6. If required, check the level again, do it
after driving a short distance. Then repeat
steps 1 - 4.
WARNING
Never fill above the MAX mark. The level
should never be above MAX or below MIN
as this could lead to engine damage.
WARNING
Do not spill oil onto the hot exhaust mani-
fold due to the risk of fire.
Engine with electronic oil level sensor,
4-cyl. 2.0 l
8
Filler pipe
9
.
You do not need to take action with respect
to the engine oil level before a message is
shown in the display, see following illustra-
tion.
Message and graph in the display. The left-hand
display shows the digital combined instrument
panel and the right-hand the analogue.
Message
Engine oil level
The oil level is checked using the electronic
oil level gauge with the thumbwheel when the
engine is switched off, see Menu navigation -
combined instrument panel (p. 110).
WARNING
If the message Oil service required is
shown, visit a workshop - an authorised
Volvo workshop is recommended. The oil
level may be too high.
8
Does not apply to the B4204T7 engine - see instead the earlier heading "Engine with oil dipstick".
9
Engines with electronic oil level sensor do not have a dipstick.
||
10 Maintenance and service
10
358
IMPORTANT
If notified of low oil level, only fill with the
volume specified, for example, 0.5 litres.
NOTE
The system cannot directly detect changes
when the oil is filled or drained. The car
must have been driven approx. 30 km and
have been stationary for 2 hours with the
engine switched off and on level ground
before oil level indication is correct.
WARNING
Do not spill oil onto the hot exhaust mani-
fold due to the risk of fire.
Measuring the oil level, 4-cyl. 2.0 l
If the oil level needs to be checked then it
should be carried out in accordance with the
following sequence.
1. Activate key position II; see Key positions
- functions at different levels (p. 78).
2. Rotate the thumbwheel on the left-hand
stalk switch to position
Oil level.
> You will then see information displayed
about the engine oil level.
For more information on menu naviga-
tion, see Menu navigation - combined
instrument panel (p. 110).
NOTE
If the right conditions for measuring the oil
level are not met (time after engine shut-
down, the car's inclination, outside tem-
perature, etc.) then the message
Not
available will be shown. This does not
mean that there is something wrong in the
car's systems.
Engine with electronic oil level sensor,
5-cyl. diesel
Filler pipe
10
.
You do not need to take action with respect
to the engine oil level before a message is
shown in the display, see following illustra-
tion.
10
Engines with electronic oil level sensor do not have a dipstick.
10 Maintenance and service
10
359
Message and graph in the display. The left-hand
display shows the digital combined instrument
panel and the right-hand the analogue.
Message
Engine oil level
The oil level is checked using the electronic
oil level gauge with the thumbwheel when the
engine is switched off, see Menu navigation -
combined instrument panel (p. 110).
WARNING
If the message Oil service required is
shown, visit a workshop - an authorised
Volvo workshop is recommended. The oil
level may be too high.
IMPORTANT
In the event of the message Oil level low
Refill 0.5 litre, only fill with 0.5 litres.
NOTE
The oil level is only detected by the system
during driving. The system cannot directly
detect changes when the oil is filled or
drained. The car must be driven
about 30 km before the oil level display is
correct.
WARNING
Do not fill more oil if filling level (3) or (4)
appears as shown in the illustration below.
The level must never be above MAX or
below MIN, as this could lead to engine
damage.
WARNING
Do not spill oil onto the hot exhaust mani-
fold due to the risk of fire.
Measuring the oil level, 5-cyl. diesel
If the oil level needs to be checked then it
should be carried out in accordance with the
following sequence.
1. Activate key position II; see Key positions
- functions at different levels (p. 78).
2. Rotate the thumbwheel on the left-hand
stalk switch to position
Oil level.
> You will then see information displayed
about the engine oil level.
For more information on menu naviga-
tion, see Menu navigation - combined
instrument panel (p. 110).
The figures 1-4 represent filling level. Do not fill
more oil if filling level (3) or (4) is shown. Recom-
mended filling level is 4. Message and graph in
the display. The left-hand display shows the digi-
tal combined instrument panel and the right-
hand the analogue.
Related information
Engine oil - general (p. 355)
10 Maintenance and service
10
360
Coolant - level
The coolant cools the internal combustion
engine to the correct operating temperature.
The heat that is transferred from the engine to
the coolant can be used to heat the passen-
ger compartment.
The coolant level must lie between the MIN
and MAX marks on the expansion tank.
Checking the level and topping up
When topping up the coolant, follow the
instructions on the packaging. It is important
that the mixture of coolant concentrate and
water is correct for the prevailing weather
conditions. Never top up with water only. The
risk of freezing increases with both too little
and too much coolant concentrate.
WARNING
Coolant can be very hot. If the coolant
requires topping up when the engine is at
operating temperature, unscrew the
expansion tank cap slowly to gently
release the overpressure.
For capacities and for standards regarding
water quality; see Coolant - grade and vol-
ume (p. 412).
Check the coolant regularly
The level must be between the MIN and MAX
marks on the expansion tank. If the system is
not filled sufficiently, high temperatures could
occur, causing a risk of damage to the
engine.
IMPORTANT
A high content of chlorine, chlorides
and other salts may cause corrosion in
the cooling system.
Always use coolant with anti-corrosion
agent as recommended by Volvo.
Ensure that the coolant mixture is 50%
water and 50% coolant.
Mix the coolant with approved quality
tap water. In the event of any doubt
about water quality, used ready-mixed
coolant in accordance with Volvo rec-
ommendations.
When changing coolant/replacing
cooling system components, flush the
cooling system clean with approved
quality tap water or flush with ready-
mixed coolant.
The engine must only be run with a
well-filled cooling system. Otherwise,
temperatures that are too high may
occur resulting in the risk of damage
(cracks) in the cylinder head.
10 Maintenance and service
10
}}
361
Brake and clutch fluid - level
Brake and clutch fluid level should be
between the reservoir MIN and MAX marks.
Checking the level
Brake and clutch fluid have a common reser-
voir. The level must be between the MIN and
MAX marks that are visible inside the reser-
voir. Check the level regularly.
Change the brake fluid every other year or at
every other regular service.
The fluid should be changed annually on cars
driven in conditions requiring hard, frequent
braking, such as driving in mountains or tropi-
cal climates with high humidity.
For capacities and recommended brake fluid
grade, see Brake fluid - grade and volume
(p. 415).
WARNING
If the brake fluid is under the MIN level in
the brake fluid reservoir, do not drive fur-
ther before topping up the brake fluid.
Volvo recommends that the reason for the
loss of brake fluid is investigated by an
authorised Volvo workshop.
Filling
The fluid reservoir is located on the driver's side.
The fluid reservoir is protected under the
cover over the cold zone in the engine com-
partment. The round cover must be removed
first before the reservoir cap can be reached.
Turn and open the cover located on the
covering.
Unscrew the reservoir cap and fill the
fluid. The level must be between the MIN
and MAX marks, which are located on
the inside of the reservoir.
IMPORTANT
Do not forget to refit the cap.
Power steering fluid - level
The power steering fluid level must be
between the reservoir's MIN and MAX marks.
The fluid does not need to be changed.
IMPORTANT
Keep the area around the power steering
fluid reservoir clean when checking. The
cover must not be opened.
Check the level frequently. The fluid does not
require changing. The level must be between
the MIN and MAX marks.
For recommended fluid grade, see Power
steering fluid - grade (p. 415).
10 Maintenance and service
10
362
NOTE
If a fault should arise in the power steering
system, or if the engine is switched off and
must be towed, then the car can still be
steered.
Climate control system - fault tracing
and repair
The air conditioning system must only be
serviced and repaired by an authorised work-
shop.
Troubleshooting and repair
The air conditioning system contains fluores-
cent tracing agents. Use ultraviolet light when
looking for leaks.
Volvo recommends that you contact an
authorised Volvo workshop.
WARNING
The air conditioning system contains pres-
surised refrigerant R134a. This system
must only be serviced and repaired by an
authorised workshop.
Related information
Volvo service programme (p. 348)
Lamp replacement - general
Lamp replacement can be carried out for
bulbs. When replacing LED and Xenon lamps,
please refer to a workshop.
The bulbs are specified (p. 368). The follow-
ing list contains locations of bulbs and other
light sources that are specialised, such as
LED
11
lamps, or are unsuitable for changing
for some other reason, except at a work-
shop
12
:
Active Xenon headlamps - ABL (Xenon
lamps)
Position/parking lamps front
Daytime running lights
Side direction indicators, door mirrors on
the V70
Approach lighting, door mirrors
Interior lighting
Position/parking lamps rear
Side marker lamps rear
Brake light
Reversing lamp
Rear fog lamp.
11
LED (Light Emitting Diode)
12
An authorised Volvo workshop is recommended.
10 Maintenance and service
10
}}
363
WARNING
On cars with Xenon headlamps, the
replacement of Xenon lamps must be car-
ried out at a workshop - an authorised
Volvo workshop is recommended. Working
with Xenon lamps demands extreme cau-
tion because the headlamp is equipped
with a high voltage unit.
WARNING
The car's electrical system must be in key
position 0 for bulb replacement; see Key
positions - functions at different levels
(p. 78).
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the
reflector and then causing damage.
NOTE
If an error message remains after the bro-
ken bulb has been replaced then we rec-
ommend that you visit an authorised Volvo
workshop.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily
have condensation on the inside of the
lens. This is normal, all exterior lighting is
designed to withstand this. Condensation
is normally vented out of the lamp housing
when the lamp has been switched on for a
time.
Related information
Lamp replacement - headlamps (p. 363)
Lamp replacement - location of rear
lamps (p. 366)
Lamp replacement - vanity mirror lighting
(p. 367)
Lamp replacement - lighting in cargo area
(p. 367)
Lamp replacement - number plate lighting
(p. 367)
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
Removing the headlamp
Set the car's electrical system in key position
0, see Key positions - functions at different
levels (p. 78).
Pull out the headlamp's locking pins.
Pull the headlamp straight forward.
IMPORTANT
Do not pull the electrical cable, only the
connector.
||
10 Maintenance and service
10
364
G010325
Detach the headlamp connector by
pressing down the clip with your thumb.
At the same time, guide out the connec-
tor with your other hand.
5. Lift out the headlamp and place it on a
soft surface to avoid scratching the lens.
6. Replace the bulb in question.
Securing the headlamp
1. Plug in the connector, a clicking sound
should be heard.
2. Reinstall the headlamp and locking pins.
Check that they are firmly inserted.
3. Check the lighting.
The headlamp must be mounted and the con-
nector firmly connected before the lighting is
switched on or the remote control key is
inserted into the ignition switch.
Related information
Lamp replacement - general (p. 362)
Lamp replacement - cover for main/
dipped beam bulbs (p. 364)
Lamps - specifications (p. 368)
Lamp replacement - cover for main/
dipped beam bulbs
Main/dipped beam bulbs are accessed by
releasing the headlamp's larger cover.
G021745
Before starting to replace a bulb, see Lamp
replacement - headlamps (p. 363).
1. Open the lock clamp by pressing up/out.
2. Press down the clips on the cover and
remove it.
Reinstall the cover in reverse order.
Related information
Lamp replacement - headlamps (p. 363)
Lamp replacement - dipped beam
(p. 365)
Lamp replacement - main beam (p. 365)
Lamp replacement - extra main beam
(p. 365)
10 Maintenance and service
10
* Option/accessory, for more information, see Introduction.
365
Lamp replacement - dipped beam
The dipped beam bulb is fitted inside the
headlamp's larger cover.
NOTE
Applies to cars with halogen headlamps.
G021746
1. Detach the headlamp (p. 363).
2. Remove the cover (p. 364).
3. Unplug the connector from the bulb.
4. Detach the bulb by pressing the holder
downwards.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Related information
Lamps - specifications (p. 368)
Lamp replacement - main beam
The main beam bulb is fitted inside the head-
lamp's larger cover.
NOTE
Applies to cars with halogen headlamps.
G021747
1. Detach the headlamp (p. 363).
2. Remove the cover (p. 364).
3. Detach the bulb by turning anticlockwise
and then pulling straight out.
4. Unplug the connector from the bulb.
5. Replace the bulb and align it in the socket
and turn clockwise in order to secure it. It
can only be secured in one position.
Reinstall the parts in reverse order.
Related information
Lamps - specifications (p. 368)
Lamp replacement - extra main beam
The extra main beam bulb is fitted inside the
headlamp's larger cover.
NOTE
Applies to cars with Xenon headlamps*.
G021748
1. Detach the headlamp (p. 363).
2. Remove the cover (p. 364).
3. Detach the bulb by pressing the holder
downwards.
4. Unplug the connector from the bulb.
5. Fit the new bulb in the socket and snap it
in. It can only be secured in one position.
Reinstall the parts in reverse order.
Related information
Lamps - specifications (p. 368)
10 Maintenance and service
10
366
Lamp replacement - direction
indicators front
The direction indicator lamp is fitted inside
the headlamp's smaller cover.
G021750
1. Detach the headlamp (p. 363).
2. Remove the small round cover.
3. Pull the bulb holder in order to extract the
bulb.
4. Remove the blown bulb and fit a new
one. It can only be installed in one way.
5. Fit the bulb holder in the socket and
press until a clicking sound is heard.
6. Refit the cover. It must be fitted and
pressed in until a clicking sound is heard.
Reinstall the parts in reverse order.
Related information
Lamps - specifications (p. 368)
Lamp replacement - rear lamp
Rear direction indicators are replaced from
inside the cargo area.
Lamp housing, rear
G017456
The direction indictor bulb in the rear lamp
cluster is replaced from inside the cargo area.
1. Open the panel.
2. Remove the insulation by pulling it
straight out.
3. Loosen the bulb holder by turning its han-
dle anticlockwise.
4. Detach the bulb by pulling it straight out.
Related information
Lamp replacement - location of rear
lamps (p. 366)
Lamps - specifications (p. 368)
Lamp replacement - location of rear
lamps
The overview shows the location of the lamps
at the rear.
Position/parking lights (LED)
Brake light (LED)
Indicator (p. 366)
Side marker lamps (LED)
Reversing lamp (p. 366)
Fog lamps (p. 366)
Brake light (LED)
Related information
Lamp replacement - general (p. 362)
Lamps - specifications (p. 368)
10 Maintenance and service
10
}}
367
Lamp replacement - number plate
lighting
The number plate lighting is located under the
tailgate handle.
G017458
1. Remove the screws with a screwdriver.
2. Carefully detach the whole lamp housing
and withdraw it.
3. Replace the bulb.
4. Refit the whole lamp housing and screw it
into place.
Related information
Lamps - specifications (p. 368)
Lamp replacement - lighting in cargo
area
The cargo area lighting is located in the tail-
gate.
G031942
1. Insert a screwdriver and gently prize so
that the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
back the lamp housing.
Related information
Lamps - specifications (p. 368)
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens
and gently prize up the lock lugs on the
edge.
2. Snap off the lamp lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not pinch hard with
the pliers. Otherwise the lamp lens could
then be crushed.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
||
10 Maintenance and service
10
368
Related information
Lamps - specifications (p. 368)
Lamps - specifications
The specifications apply to bulbs. When
replacing LED and Xenon lamps, please refer
to a workshop.
Lighting
W
A
Type
Dipped beam, hal-
ogen
55 H7 LL
Main beam, Halo-
gen
65 H9
Extra main beam,
ABL
55 H7 LL
Front direction
indicators
21 H21W LL
Side direction indi-
cators, door mir-
rors
B
5 WY5W LL
Glovebox lighting 5 Socket SV8.5
Length 43 mm
Vanity mirror light-
ing
2 T5 Socket
W2x4.6d
Cargo area lighting 10 Socket SV8.5
Length 43 mm
Lighting
W
A
Type
Number plate
lighting
5 C5W LL
Direction indica-
tors, rear
21 PY21W SV
A
Watt
B
Replacement of bulbs only on the XC70. The V70 is equip-
ped with LED lamps.
Related information
Lamp replacement - general (p. 362)
Lamp replacement - location of rear
lamps (p. 366)
Lamp replacement - vanity mirror lighting
(p. 367)
10 Maintenance and service
10
}}
369
Wiper blades
The wiper blades sweep water away from the
windscreen and rear window. Together with
the washer fluid they clean the windows and
ensure visibility for driving.
The windscreen wiper blades must be in serv-
ice position when they are to be replaced.
Service position
Wiper blades in service position.
In order to change, clean or lift the wiper
blades (for scraping off ice from the wind-
screen, for example) they must be in service
position.
IMPORTANT
Before placing the wiper blades in the
service position, make sure that they are
not frozen down.
1. Insert the remote control key in the igni-
tion switch
13
and briefly press the
START/STOP ENGINE button to set the
car's electrical system to key position I.
For detailed information on key positions,
see Key positions - functions at different
levels (p. 78).
2. Briefly press the START/STOP ENGINE
button again to set the car’s electrical
system in key position 0.
3. Within 3 seconds, move the right stalk
switch up and hold it in position for
approx. 1 second.
> The wipers then move to standing
straight up.
The wipers return to their starting position
when you briefly press the START/STOP
ENGINE button to set the car’s electrical sys-
tem to key position I (or when the car is
started).
IMPORTANT
If the wiper arms in service position have
been folded up from the windscreen, they
must be folded back down onto the wind-
screen before the wipers are allowed to
return to their starting position. This is to
avoid scraping the paint on the bonnet.
Replacing the wiper blades
13
Not necessary in cars with the Keyless function.
||
10 Maintenance and service
10
370
Fold up the wiper arm when it is in serv-
ice position. Press the button located on
the wiper blade mounting and pull
straight out parallel with the wiper arm.
Slide in the new wiper blade until a "click"
is heard.
Check that the blade is firmly installed.
4. Fold the wiper arm back towards the
windscreen.
The wipers return from service position to
their starting position when you briefly press
the START/STOP ENGINE button to set the
car’s electrical system to key position I (or
when the car is started).
G021763
NOTE
The wiper blades are different lengths. The
blade on the driver's side is longer than on
the passenger side.
Replacing the wiper blades, rear
window
G032770
1. Fold out the wiper arm.
2. Grip the inner section of the blade (by the
arrow).
3. Turn anticlockwise to use the blade's end
position against the wiper arm as a lever
to detach the blade more easily.
4. Press the new wiper blade into position.
Check that it is firmly installed.
5. Lower the wiper arm.
Cleaning
For cleaning wiper blades and windscreen,
see Car wash (p. 390).
IMPORTANT
Check the blades regularly. Neglected
maintenance shortens the service life of
the wiper blades.
Related information
Washer fluid - filling (p. 371)
10 Maintenance and service
10
}}
371
Washer fluid - filling
Washer fluid is used for cleaning the head-
lamps and windows. Washer fluid with anti-
freeze must be used during winter.
The windscreen and headlamp washers share
a common reservoir.
IMPORTANT
Use Volvo genuine washer fluid or equiva-
lent with a recommended pH of between 6
and 8, in working dilution (e.g. 1:1 with
neutral water).
IMPORTANT
Use washer fluid with antifreeze during the
winter to avoid freezing in the pump, reser-
voir and hoses.
For capacities, see Washer fluid - quality and
volume (p. 415).
Related information
Wiper blades (p. 369)
Starter battery - general
The starter battery is used to drive the starter
motor and other electrical equipment in the
car.
The starter battery is a traditional 12 V bat-
tery.
The service life and function of the starter
battery is influenced by factors such as the
number of starts, discharging, driving style,
driving conditions, climatic conditions, etc.
Never disconnect the starter battery when
the engine is running.
Check that the cables to the starter bat-
tery are correctly connected and properly
tightened.
Engine
Petrol
(Ethanol)
Diesel
Voltage (V) 12 12
Cold start
capacity
A
-
CCA
B
(A)
520–800 700–800
A
In accordance with SAE or EN standard.
B
Cold Cranking Amperes.
||
10 Maintenance and service
10
372
IMPORTANT
When replacing the starter battery, in cars
with Start/Stop function, a battery of the
correct type must be fitted, EFB
14
in cars
with manual gearbox and AGM
15
in cars
with automatic gearbox.
When replacing the support battery, a bat-
tery of AGM type must be fitted.
IMPORTANT
If the starter battery is replaced, make sure
you replace it with a battery with the same
cold starting capacity and type as the orig-
inal battery (see the label on the battery).
NOTE
The starter battery's container size
should be consistent with the original
battery's dimensions.
The starter battery's height is different
depending on size.
WARNING
The battery can generate oxyhydrogen
gas, which is highly explosive. A spark
can be formed if a jump lead is con-
nected incorrectly, and this can be
enough for the battery to explode.
The battery contains sulphuric acid,
which can cause serious burns.
If sulphuric acid comes into contact
with eyes, skin or clothing, flush with
large quantities of water. If acid
splashes into the eyes - seek medical
attention immediately.
IMPORTANT
When charging the starter battery or the
support battery (p. 375), only use a mod-
ern battery charger with controlled charg-
ing voltage. Fast charging function must
not be used since it may damage the bat-
tery.
IMPORTANT
If the following instruction is not observed
then the energy saving function for info-
tainment system may be temporarily dis-
engaged, and/or the message in the com-
bined instrument panel's information dis-
play about the starter battery's state of
charge may be temporarily inapplicable,
following the connection of an external
starter battery or battery charger:
The negative battery terminal on the
car's starter battery must never be
used for connecting an external starter
battery or battery charger - only the
car chassis may be used as the
grounding point.
See Jump starting with battery (p. 267) for
a description of how the cable clamps
must be attached.
14
Enhanced Flooded Battery.
15
Absorbed Glass Mat.
10 Maintenance and service
10
373
NOTE
The life of the battery is shortened if it
becomes discharged repeatedly.
The life of the battery is affected by several
factors, including driving conditions and
climate. Battery starting capacity decrea-
ses gradually with time and therefore
needs to be recharged if the car is not
used for a longer time or when it is only
driven short distances. Extreme cold fur-
ther limits starting capacity.
To maintain the battery in good condition,
at least 15 minutes of driving/week is rec-
ommended or that the battery is con-
nected to a battery charger with automatic
trickle charging.
A battery that is kept fully charged has a
maximum service life.
Related information
Battery - symbols (p. 373)
Starter battery - replacement (p. 374)
Battery - Start/Stop (p. 375)
Battery - symbols
There are information and warning symbols
on the battery.
Symbols on the battery
Use protective goggles.
Further information in the
owner's manual for the
car.
Store the battery out of
the reach of children.
The battery contains cor-
rosive acid.
Avoid sparks and naked
flames.
Risk of explosion.
Must be taken for recy-
cling.
NOTE
An expended battery must be recycled in
an environmentally safe manner as it con-
tains lead.
Related information
Starter battery - general (p. 371)
10 Maintenance and service
10
374
Starter battery - replacement
The starter battery in the car can be replaced
without the help of a workshop.
The starter battery is a traditional 12 V bat-
tery.
Removal
First of all: Take the remote control key from
the ignition switch and wait at least 5 minutes
before any electrical connections are touched
- this is because the car's electrical system
needs to store the necessary information to
control modules.
Open the clips on the front cover and
remove the cover.
Release the rubber moulding so that the
rear cover is free.
Remove the rear cover by screwing one
quarter turn and lifting it away.
WARNING
Connect and remove the positive and neg-
ative cables in the correct order.
Detach the black negative cable.
Detach the red positive cable.
Detach the ventilation hose from the bat-
tery.
Loosen the screw holding the battery
clamp.
Move the battery aside.
Lift it up.
Fitting
10 Maintenance and service
10
}}
* Option/accessory, for more information, see Introduction.
375
1. Lower the battery into the battery box.
2. Move the battery inward and to the side
until it reaches the rear edge of the box.
3. Tighten the clamp that holds the battery.
4. Connect the ventilation hose.
> Check that it is correctly connected to
both battery and outlet in the body.
5. Connect the red positive cable.
6. Connect the black negative cable.
7. Press in the rear cover. (See earlier sec-
tion "Removal".)
8. Fit the rubber moulding. (See "Removal".)
9. Align the front cover and secure it with
the clips. (See "Removal".)
For more information on the car's starter bat-
tery, see Jump starting with battery (p. 267).
Battery - Start/Stop
Cars with the Start/Stop function are equip-
ped with a support battery in addition to the
starter battery.
Cars with the Start/Stop function are equip-
ped with two 12 V batteries - one extra pow-
erful starter battery for starting and one sup-
port battery that helps during the Start/Stop
function's starting sequence.
For more information on the Start/Stop func-
tion, see Start/Stop* (p. 279).
For more information on the car's starter bat-
tery, see Jump starting with battery (p. 267).
The following table shows specifications for
the starter battery and support battery
respectively in cars with Start/Stop function.
Battery
Start, 12 V Support, 12
V
Cold
start
capacity
A
- CCA
B
(A)
720
C
760
D
Left-hand
drive car:
120
E
170
F
Right-hand
drive car:
120
Size,
L×W×H
(mm)
278×175×190
Left-hand
drive car:
150×90×106
E
150×90×130
F
Right-hand
drive car:
150×90×106
||
10 Maintenance and service
10
376
Battery
Start, 12 V Support, 12
V
Capacity
(Ah)
70
Left-hand
drive car:
8
E
10
F
Right-hand
drive car:
8
A
In accordance with EN standard.
B
Cold Cranking Amperes.
C
Manual gearbox.
D
Automatic gearbox.
E
Manual gearbox in combination with Start/Stop function
that only auto-stops when the car is completely stationary.
F
Others.
IMPORTANT
When replacing the starter battery, in cars
with Start/Stop function, a battery of the
correct type must be fitted, EFB
16
in cars
with manual gearbox and AGM
17
in cars
with automatic gearbox.
When replacing the support battery, a bat-
tery of AGM type must be fitted.
NOTE
The higher the current take-off in the
car, the more the alternator must be
working and the batteries charging =
Increased fuel consumption.
When the capacity of the starter bat-
tery has fallen below the lowest per-
missible level then the Start/Stop func-
tion is disengaged.
Temporarily reduced Start/Stop function due
to high current take-off means:
The engine starts automatically
18
without
the driver depressing the clutch pedal
(manual gearbox).
The engine starts automatically without
the driver lifting his/her foot off the foot
brake pedal (automatic gearbox).
Location of the batteries
A: Left-hand drive car. B: Right-hand drive car.
(1) Starter battery
19
(2) Support battery.
The support battery normally requires no
more service than the normal starter battery.
A workshop should be contacted in the event
of questions or problems - an authorised
Volvo workshop is recommended.
IMPORTANT
If the following instruction is not observed
then the Start/Stop function may tempo-
rarily cease to work after the connection of
an external battery or battery charger:
The negative battery terminal on the
car's starter battery must never be
used for connecting an external bat-
16
Enhanced Flooded Battery.
17
Absorbed Glass Mat.
18
Automatic starting can only take place if the gear lever is in neutral position.
19
See Starter battery - general (p. 371) for detailed description of the starter battery.
10 Maintenance and service
10
377
tery or battery charger - only the car
chassis may be used as the ground-
ing point.
See Jump starting with battery (p. 267) for
a description of how the cable clamps
must be attached.
NOTE
If the battery has become so discharged
that everything is "black" and in principle
the car does not have all the normal elec-
trical functions and the engine is subse-
quently started using an external battery or
battery charger, then the Start/Stop func-
tion will be activated. It will then be possi-
ble for the engine to be auto-stopped but
in the event of an auto-stop the Start/Stop
function may fail to auto-start the engine
due to inadequate capacity in the battery.
The battery must first be charged in order
to ensure a successful auto-start after an
auto-stop. At an outside temperature of
+15 °C the battery needs to be charged for
at least 1 hour. At a lower outside tem-
perature a charging time of 3-4 hours is
recommended. The recommendation is
that the battery is charged using an exter-
nal battery charger.
If this is not possible then the recommen-
dation is to temporarily deactivate the
Start/Stop function until the battery has
been adequately recharged.
For more information on charging the
starter battery, see Starter battery - gen-
eral (p. 371).
Related information
Battery - symbols (p. 373)
Electrical system
The electrical system is single-pole and uses
the chassis and engine casing as a conductor.
The car has a voltage-regulated AC alterna-
tor.
The size, type and performance of the starter
battery depend on the car's equipment and
function.
IMPORTANT
If the starter battery is replaced, make sure
you replace it with a battery with the same
cold starting capacity and type as the orig-
inal battery (see the label on the battery).
Related information
Starter battery - replacement (p. 374)
Starter battery - general (p. 371)
10 Maintenance and service
10
378
Fuses - general
All electrical functions and components are
protected by a number of fuses in order to
protect the car's electrical system from dam-
age by short circuiting or overloading.
If an electrical component or function does
not work, it may be because the component's
fuse was temporarily overloaded and failed. If
the same fuse fails repeatedly then there is a
fault in the circuit. Volvo recommends that
you visit an authorised Volvo workshop for
checking.
Changing
1. Look in the fuse diagram to locate the
fuse.
2. Pull out the fuse and check from the side
to see whether the curved wire has
blown.
3. If this is the case, replace it with a new
fuse of the same colour and amperage.
WARNING
Never use a foreign object or a fuse with
an amperage higher than that specified
when replacing a fuse. This could cause
significant damage to the electrical system
and possibly lead to fire.
Location of central electrical units
Central electrical unit locations in a left-hand
drive car. In a right-hand drive car the central
electrical units under the glovebox change
sides.
Engine compartment
Under the glovebox
Under the glovebox
Cargo area
Engine compartment cold zone (only
Start/Stop)
Related information
Fuses - in engine compartment (p. 379)
Fuses - under glovebox (p. 383)
Fuses - in the control module under the
glovebox (p. 385)
Fuses - in cargo area (p. 387)
Fuses - in the engine compartment's cold
zone (p. 388)
10 Maintenance and service
10
}}
379
Fuses - in engine compartment
Fuses in the engine compartment protect
engine and brake functions, amongst other
things.
||
10 Maintenance and service
10
380
* Option/accessory, for more information, see Introduction.
General fuses, engine compartment
On the inside of the cover there are tweezers
that facilitate the procedure for the removal
and fitting of fuses.
Positions (see preceding illustration)
Engine compartment, upper
Engine compartment, front
Engine compartment, lower
These fuses are all located in the engine com-
partment box. The fuses in (C) are located
under (A).
On the inside of the cover is a label that
shows the location of the fuses.
Fuses 1-7 and 42-44 are of the "Midi
Fuse" type and must only be replaced by
a workshop
20
.
Fuses 8-15 and 34 are of the "JCASE"
type and should be replaced by a work-
shop
20
Fuses 16-33 and 35-41 are of the "Mini
Fuse" type.
Function A
Primary fuse for the central
electronic module (CEM) under
the glovebox
A
50
Primary fuse for the central
electronic module (CEM) under
the glovebox
50
Primary fuse for central electri-
cal unit in cargo area
A
60
Primary fuse for relay/fuse box
under the glovebox
A
60
Primary fuse for relay/fuse box
under the glovebox
A
60
- -
Electric additional heater*
A
100
Heated windscreen*, left-hand
side
40
Windscreen wipers 30
Parking heater* 25
Ventilation fan
A
40
Heated windscreen*, right-
hand side
40
Function A
ABS pump 40
ABS valves 20
Headlamp washers* 20
Headlamp levelling*; Active
Xenon headlamps - ABL*
10
Primary fuse for the central
electronic module (CEM) under
the glovebox
20
ABS 5
Adjustable steering force* 5
Engine control module; Trans-
mission control module; Air-
bags
10
Heated washer nozzles* 10
- -
Headlamp control 5
- -
- -
- -
20
An authorised Volvo workshop is recommended.
10 Maintenance and service
10
}}
* Option/accessory, for more information, see Introduction.
381
Function A
Relay coils 5
Auxiliary lamps* 20
Horn 15
Relay coil in main relay for
engine management system;
Engine control module (4-cyl.
2.0 l
B
, 5, 6-cyl.)
10
Transmission control module 15
Solenoid clutch A/C (not 4-cyl.
2.0 l
C
, not 5-cyl. diesel); Sup-
porting coolant pump (4-cyl.
2.0 l diesel)
15
Relay coil in relay for solenoid
clutch A/C (not 5-cyl. diesel);
Relay coil in relay for coolant
pump (1.6 l petrol Start/Stop);
Relay coils in central electrical
unit in engine compartment
cold zone (Start/Stop)
5
Start relay
A
30
Function A
Ignition coils (1.6 l petrol,
engine B4204T7); Glow control
module (5-cyl. diesel)
10
Engine control module (4-cyl.
2.0 l
B
); Ignition coils (5, 6-cyl.
petrol); Capacitor (6-cyl.)
20
Engine control module (petrol
except 4-cyl. 2.0 l
C
)
10
Engine control module (1.6 l
diesel, 5-cyl. diesel)
15
Engine control module (4-cyl.
2.0 l
B
)
20
Valves (1.6 l petrol); mass air
flow sensor (1.6 l, 4-cyl. 2.0 l
B
);
Thermostat (4-cyl. 2.0 l pet-
rol
B
); EVAP valve (4-cyl. 2.0 l
petrol
B
); Cooling pump for EGR
(4-cyl. 2.0 l diesel)
Regulator valve, fuel flow
(engine D4162T)
10
Mass air flow sensor (5-cyl.
diesel, 6-cyl.); Control valves
(5-cyl. diesel); Injectors (5, 6-
cyl. petrol); Engine control
module (5, 6-cyl. petrol)
15
Function A
Solenoid clutch A/C (5, 6-cyl.);
Valves (1.6 l, engine B4204T7,
5, 6-cyl.); Engine control mod-
ule (6-cyl.); Solenoids (6-cyl.
without turbo); Actuator
motors, intake manifold (6-cyl.
without turbo); Mass air flow
sensor (engine B4204T7, 5-cyl.
petrol); Oil level sensor (5-cyl.
diesel)
10
Valves (4-cyl. 2.0 l
B
); Oil pump
(4-cyl. 2.0 l petrol
B
); Lambda-
sond, centre (4-cyl. 2.0 l pet-
rol
B
); Lambda-sond, rear (4-cyl.
2.0 l diesel)
15
Lambda-sonds (1.6 l petrol,
engine B4204T7); Lambda-
sond (5-cyl. diesel); Control
module, radiator roller cover
(1.6 l diesel, 5-cyl. diesel)
10
Lambda-sond, front (4-cyl.
2.0 l
B
); Lambda-sond, rear (4-
cyl. 2.0 l petrol
B
); EVAP valve
(5, 6-cyl. petrol); Lambda-
sonds (5, 6-cyl. petrol)
15
||
10 Maintenance and service
10
382
Function A
Coolant pump (1.6 l petrol
Start/Stop)
Coolant pump (5-cyl. petrol);
Crankcase ventilation heater
(5-cyl. petrol); Oil pump auto-
matic gearbox (5-cyl. petrol
Start/Stop)
10
Ignition coils (4-cyl. 2.0 l pet-
rol
B
)
15
Diesel filter heater (diesel) 20
Control module, radiator roller
cover (5-cyl. petrol)
5
Solenoid clutch A/C (4-cyl.
2.0 l petrol
B
)
7.5
Crankcase ventilation heater
(5-cyl. diesel); Oil pump auto-
matic gearbox (5-cyl. diesel
Start/Stop)
10
Solenoid clutch A/C (4-cyl.
2.0 l diesel); Glow control mod-
ule (4-cyl. 2.0 l diesel); Oil
pump (4-cyl. 2.0 l diesel)
15
Coolant pump (4-cyl. 2.0 l pet-
rol
B
)
50
Glow plugs (diesel) 70
Function A
Cooling fan (1.6 l, 4-cyl. 2.0 l
petrol, 5-cyl. petrol)
60
Cooling fan (6-cyl., 4-cyl. 2.0 l
diesel, 5-cyl. diesel)
80
Power steering 100
A
For cars with the Start/Stop function this fuse location is
empty - see instead Fuses - in the engine compartment's
cold zone (p. 388).
B
Does not apply to the B4204T7 engine.
C
However, does apply to the B4204T7 engine.
Related information
Fuses - under glovebox (p. 383)
Fuses - in the control module under the
glovebox (p. 385)
Fuses - in cargo area (p. 387)
10 Maintenance and service
10
}}
* Option/accessory, for more information, see Introduction.
385
Fuses - in the control module under
the glovebox
Fuses in the control module under the glove-
box protect airbag and collision warning sys-
tem functions, amongst other things.
Positions
Function A
Rear window wiper 15
- -
Interior lighting; Driver's door
control panel, power windows;
Power seats*
7.5
Combined instrument panel 5
Function A
Adaptive cruise control, ACC*;
collision warning system*
10
Interior lighting; Rain sensor* 7.5
Steering wheel module 7.5
Central locking system, fuel
filler flap
10
Rear window washer 15
Function A
Windscreen washers 15
Unlocking, tailgate 10
Folding head restraint* 10
Fuel pump 20
Movement detector alarm*; Cli-
mate panel
5
10 Maintenance and service
10
* Option/accessory, for more information, see Introduction.
387
Fuses - in cargo area
Fuses in the cargo area protect the electric
parking brake, amongst other things.
The fuse box is located behind the upholstery on the left-hand side.
Positions
Function A
Electric parking brake, left 30
Electric parking brake, right 30
Rear window defroster 30
Trailer socket 2* 15
Power operated tailgate* 20
Function A
- -
- -
- -
- -
- -
Function A
Trailer socket 1* 40
- -
Related information
Fuses - in engine compartment (p. 379)
Fuses - under glovebox (p. 383)
Fuses - in the control module under the
glovebox (p. 385)
Fuses - in the engine compartment's cold
zone (p. 388)
10 Maintenance and service
10
388
* Option/accessory, for more information, see Introduction.
Fuses - in the engine compartment's
cold zone
Fuses in the engine compartment's cold zone
are fitted in cars with the Start/Stop function.
Location of fuses for the Start/Stop function.
Fuses A1 and A2 are of the "MEGA Fuse"
type and must only be replaced by a
workshop
21
.
Fuses 1-11 are of the "Midi Fuse" type
and must only be replaced by a work-
shop
21
.
Fuse 12 is of the "Mini Fuse" type.
For more information on Start/Stop - see
Start/Stop* (p. 279).
Positions
Function A
Main fuse for central electrical
unit in the engine compartment
175
Main fuse for central electronic
module (CEM) under the glove-
box, relay/fuse box under the
glovebox, central electrical unit
in cargo area
175
Function A
Electric additional heater* 100
Primary fuse for the central
electronic module (CEM) under
the glovebox
50
Primary fuse for relay/fuse box
under the glovebox
60
21
An authorised Volvo workshop is recommended.
10 Maintenance and service
10
389
Function A
Primary fuse for relay/fuse box
under the glovebox
60
Primary fuse for central electri-
cal unit in cargo area
60
Ventilation fan 40
- -
- -
Start relay 30
Internal diode 50
Support battery 70
Central electronic module
(CEM) - reference voltage sup-
port battery; Charging point
support battery
15
Related information
Fuses - in engine compartment (p. 379)
Fuses - under glovebox (p. 383)
Fuses - in the control module under the
glovebox (p. 385)
Fuses - in cargo area (p. 387)
10 Maintenance and service
10
390
Car wash
The car should be washed as soon as it
becomes dirty. Wash the car in a car wash
with oil separator. Use car shampoo.
Washing by hand
Remove bird droppings from the paint-
work as soon as possible. Bird droppings
contain chemicals that affect and discol-
our paintwork very quickly. An authorised
Volvo workshop is recommended for the
removal of any discoloration.
Hose down the underbody.
Rinse the whole car until the loose dirt
has been removed in order to reduce the
risk of scratches from washing. Do not
spray directly onto the locks.
If necessary, use cold degreasing agent
on very dirty surfaces. Note that the sur-
faces must not then be warmed up by the
sun!
Wash using a sponge, car shampoo and
plenty of lukewarm water.
Clean the wiper blades with a lukewarm
soap solution or car shampoo.
Dry the car using a clean, soft chamois or
a water scraper. If you avoid allowing
water droplets to dry in strong sunlight
then the risk of water stains that may
need to be polished away is reduced.
WARNING
Always have the engine cleaned by a
workshop. There is a risk of fire if the
engine is hot.
IMPORTANT
Dirty headlamps have impaired functional-
ity. Clean them regularly, when refuelling
for example.
Do not use any corrosive cleaning agents
but use water and a non-scratching
sponge instead.
NOTE
Outside lighting such as headlamps, fog
lamps and rear lamps may temporarily
have condensation on the inside of the
lens. This is normal, all exterior lighting is
designed to withstand this. Condensation
is normally vented out of the lamp housing
when the lamp has been switched on for a
time.
Wiper blades
Asphalt, dust and salt residue on wiper
blades, as well as insects, ice etc. on the
windscreen, impair the service life of wiper
blades.
For cleaning:
- Set the wiper blades to the service position,
see Wiper blades (p. 369).
NOTE
Wash the wiper blades and windscreen
regularly with lukewarm soap solution or
car shampoo. Do not use any strong sol-
vents.
Automatic car washes
An automatic car wash is a simple and quick
way of washing the car, but it cannot reach
everywhere. Handwashing the car is recom-
mended for achieving optimum results.
NOTE
The car must only be washed by hand
over the first few months. This is because
the paint is more delicate when it is new.
High-pressure washing
When using high-pressure washing, use
sweeping movements and make sure that the
nozzle does not come closer than 30 cm to
the surface of the car (the distance applies to
all exterior parts). Do not spray directly onto
the locks.
10 Maintenance and service
10
}}
391
Testing the brakes
WARNING
Always test the brakes after washing the
car, including the parking brake, to ensure
that moisture and corrosion do not attack
the brake linings and reduce braking per-
formance.
Lightly depress the brake pedal now and then
when driving long distances in rain or slush.
The heat from the friction causes the brake
linings to warm up and dry. Do the same
thing after starting in very damp or cold
weather.
Exterior plastic, rubber and trim
components
A special cleaning agent available from Volvo
dealers is recommended for the cleaning and
care of coloured plastic parts, rubber and trim
components, such as glossy trim mouldings.
When using such a cleaning agent the
instructions must be followed carefully.
IMPORTANT
Avoid waxing and polishing on plastic and
rubber.
When using degreasant on plastic and
rubber, only rub with light pressure if it is
necessary. Use a soft washing sponge.
Polishing glossy trim mouldings could
wear away or damage the glossy surface
layer.
Polishing agent that contains abrasive
must not be used.
Rims
Only use rim cleaning agent recommended
by Volvo.
Strong rim cleaning agents can damage the
surface and cause stains on chrome-plated
aluminium rims.
Related information
Polishing and waxing (p. 391)
Cleaning the interior (p. 393)
Water and dirt-repellent coating (p. 392)
Polishing and waxing
Polish and wax the car if the paintwork is dull
or to give the paintwork extra protection.
The car does not need to be polished until it
is at least one year old. However, the car can
be waxed during this time. Do not polish or
wax the car in direct sunlight.
Wash and dry the car thoroughly before you
begin polishing or waxing. Clean off asphalt
and tar stains using tar remover or white spi-
rit. More stubborn stains can be removed
using fine rubbing paste designed for car
paintwork.
Polish first with a polish and then wax with
liquid or solid wax. Follow the instructions on
the packaging carefully. Many preparations
contain both polish and wax.
IMPORTANT
Avoid waxing and polishing on plastic and
rubber.
When using degreasant on plastic and
rubber, only rub with light pressure if it is
necessary. Use a soft washing sponge.
Polishing glossy trim mouldings could
wear away or damage the glossy surface
layer.
Polishing agent that contains abrasive
must not be used.
||
10 Maintenance and service
10
392
* Option/accessory, for more information, see Introduction.
IMPORTANT
Only paint treatment recommended by
Volvo should be used. Other treatment
such as preserving, sealing, protection,
lustre sealing or similar could damage the
paintwork. Paintwork damage caused by
such treatments is not covered by Volvo
warranty.
Related information
Car wash (p. 390)
Water and dirt-repellent coating
The windows are treated with a surface coa-
ting that improves visibility in difficult weather
conditions.
Water and dirt-repellent coating*
There is natural wear of the water-
repellent coating.
Maintenance:
Never use products such as car wax,
degreaser or similar on glass surfaces as
this could ruin their water-repellent prop-
erties.
Take care when cleaning so as not to
damage the glass surface.
To avoid damaging glass surfaces when
removing ice – only use plastic ice scra-
pers.
Treatment with a special finishing agent
available from Volvo dealers is recom-
mended in order to maintain the water-
repellent properties. This should be used
first after three years and then each year.
IMPORTANT
Do not use a metal ice scraper to remove
ice from the windows. Use the heating to
remove ice from the door mirrors, see Win-
dows and rearview and door mirrors -
heating (p. 106).
Related information
Car wash (p. 390)
Rustproofing
The car received a thorough and complete
rustproofing at the factory. Parts of the body
are made of galvanised sheet metal. The
underbody is protected by a wear-resistant
anti-corrosion compound. A thin, penetrating
rustproofing fluid was sprayed into the
exposed members, cavities, closed sections
and side doors.
Inspection and maintenance
Dirt and road salt can lead to corrosion so it
is important to keep the car clean. The car's
rustproofing needs to be checked regularly
and touched-up if necessary in order for it to
be maintained.
Under normal conditions the rustproofing
does not require treatment for approximately
12 years. After this period, it should be trea-
ted at three-year intervals. Volvo recom-
mends that you engage an authorised Volvo
workshop for assistance if the car needs fur-
ther treatment.
Related information
Paint damage (p. 394)
10 Maintenance and service
10
}}
393
Cleaning the interior
Only use cleaning agents and car care prod-
ucts recommended by Volvo. Clean regularly
and treat stains at once for best results. Vac-
uuming is important prior to using cleaning
agents.
IMPORTANT
Certain items of coloured clothing (e.g.
dark jeans and suede garments) may
stain the upholstery. If this occurs, it is
important to clean and treat these
parts of the upholstery as soon as
possible.
Never use strong solvents such as
washer fluid, pure petrol or white spirit
to clean the interior, since this may
damage the upholstery as well as
other interior materials.
Never spray the cleaning agent directly
onto components that have electrical
buttons and controls. Wipe them
instead using a moistened cloth con-
taining the cleaning agent.
Sharp objects and Velcro may damage
the fabric upholstery.
Fabric upholstery and ceiling upholstery
Volvo offers a comprehensive fabric care
product for fabric upholstery and ceiling
upholstery which, when used in accordance
with the instructions, preserves the properties
of the upholstery. The fabric care product is
available at your Volvo dealer.
Leather upholstery
Volvo's leather upholstery is treated to pre-
serve its original appearance.
Leather upholstery is a natural product that
changes and acquires a beautiful patina over
time. Regular cleaning and treatment are
required in order that the properties and col-
ours of the leather shall be preserved. Volvo
offers a comprehensive product, Volvo
Leather Care Kit/Wipes, for the cleaning and
treatment of leather upholstery which, when
used in accordance with the instructions, pre-
serves the leather's protective coating.
To achieve best results, Volvo recommends
the cleaning and application of the protective
cream once to four times per year (or more if
required). The Volvo Leather Care Kit/Wipes
is available from your Volvo dealer.
Leather steering wheel
Leather needs to breathe. Never cover the
leather steering wheel with protective plastic.
Volvo Leather Care Kit/Wipes is recom-
mended for cleaning the leather steering
wheel.
Interior plastic, metal and wood parts
A fibrillated fibre or microfibre cloth, lightly
moistened with water, available from Volvo
dealers, is recommended for cleaning interior
parts and surfaces.
Do not scrape or rub stains. Never use strong
stain removers. A special cleaning agent
available from Volvo dealers can be used for
more difficult cleaning.
Seatbelts
Use water and a synthetic detergent. A spe-
cial textile cleaning agent is available from
your Volvo dealer. Ensure that the seatbelt is
dry before allowing it to retract.
Inlay mats and floor mat
Remove inlaid carpets for separate cleaning
of the floor carpet and the inlaid carpets. Use
a vacuum cleaner to remove dust and dirt.
Each inlay mat is secured with pins.
Remove the inlay mat by taking hold of the
inlay mat at each pin and lifting the mat
straight up.
Fit the inlay mat in place by pressing it in at
each pin.
WARNING
Only use one inlaid mat at each seat, and
check before setting off that the mat by
the driver's seat is firmly affixed and
secured in the pins so that it does not get
caught adjacent to and under the pedals.
A special textile cleaner is recommended for
stains on the floor mat after vacuuming. Floor
mats should be cleaned with agents recom-
mended by your Volvo dealer.
||
10 Maintenance and service
10
394
Related information
Car wash (p. 390)
Paint damage
Paint is an important part of the car's rust-
proofing and should therefore be checked
regularly. The most common types of paint-
work damage are stone chips, scratches, and
marks on the edges of wings, doors and
bumpers.
Touching up minor paintwork damage
To avoid the onset of rust, damaged paint-
work should be rectified immediately.
Materials
primer
22
- a special adhesive primer in a
spray can is available for e.g. plastic-
coated bumpers
base coat and clear coat - are available in
spray cans or as touch-up pens/sticks
23
masking tape
fine sand paper
22
.
Colour code
Exterior colour code
Any secondary exterior colour code
It is important that the correct colour is used.
For product label location, see Type designa-
tions (p. 397).
22
If required.
23
Follow the instructions that are included with the package for the touch-up pen/stick.
10 Maintenance and service
10
395
Repairing minor paint damage such as
stone chips and scratches
G021832
Before work is started, the car must be clean
and dry as well as at a temperature above
15 °C.
1. Apply a piece of masking tape over the
damaged surface. Then remove the tape
to remove any loose paint.
If the damage has reached down to a
metal surface (sheet steel), it is preferable
to use a primer. In the event of damage to
a plastic surface, an adhesive primer
should be used for better results - spray
into the spray can's cap and brush thinly.
2. Before painting, gentle polishing using a
very fine polishing agent may be carried
out locally if required (e.g. if there are any
uneven edges). Clean the surface thor-
oughly and allow to dry.
3. Stir the primer well and apply using a fine
brush, matchstick or similar. Finish with
base coat and clear coat once the primer
has dried.
4. For scratches, proceed as above, but
mask around the damaged area to pro-
tect the undamaged paintwork.
NOTE
If the stone chip has not penetrated down
to the meal and an undamaged layer of
paint remains in place, fill in with base coat
and clear coat as soon as the surface has
been cleaned.
Related information
Rustproofing (p. 392)
SPECIFICATIONS
11 Specifications
11
}}
397
Type designations
Type designation, vehicle identification num-
ber, etc., i.e. information unique to the car,
can be read on a label in the car.
||
11 Specifications
11
398
Label location
Knowing the car's type designation, vehicle
identification and engine numbers can facili-
tate all contact with an authorised Volvo
dealer regarding the car and when ordering
spare parts and accessories.
Type designation, vehicle identification
number, permissible maximum weights
and code designation for exterior colour
and date of manufacture. The decal is
11 Specifications
11
399
positioned on the door pillar, and will be
visible when the right-hand rear door is
opened.
Label for parking heater.
Engine code and engine serial number.
Label for engine oil.
Gearbox type designation and serial num-
ber.
Manual gearbox
Automatic gearbox
Car's identification number. (VIN Vehicle
Identification Number)
Further information on the car is presented in
the registration document.
NOTE
It is not intended that the decals illustrated
in the owner's manual should be exact
replicas of those in the car. They are
included to show their approximate
appearance and location in the car. The
information that applies to your particular
car is available on the respective decals
for your car.
Related information
Weights (p. 402)
Engine specifications (p. 406)
11 Specifications
11
408
Engine oil - adverse driving conditions
Adverse driving conditions can lead to abnor-
mally high oil temperature or oil consumption.
Below are some examples of adverse driving
conditions.
Check the oil level (p. 356) more frequently for
long journeys:
towing a caravan or trailer
in mountainous regions
at high speeds
in temperatures colder than -30 °C or
hotter than +40 °C.
The above also apply to shorter driving dis-
tances at low temperatures.
Choose a fully synthetic engine oil for adverse
driving conditions. It provides extra protection
for the engine.
Volvo recommends:
IMPORTANT
In order to fulfil the requirements for the
engine's service intervals all engines are
filled with a specially adapted synthetic
engine oil at the factory. The choice of oil
has been made very carefully with regard
to service life, starting characteristics, fuel
consumption and environmental impact.
An approved engine oil must be used in
order that the recommended service inter-
vals can be applied. Only use a prescribed
grade of oil for both filling and oil change,
otherwise you will risk affecting service life,
starting characteristics, fuel consumption
and environmental impact.
Volvo Car Corporation disclaims all war-
ranty liability if engine oil of the prescribed
grade and viscosity is not used.
Volvo recommends that oil changes are
carried out at an authorised Volvo work-
shop.
Related information
Engine oil - grade and volume (p. 409)
Engine oil - general (p. 355)
11 Specifications
11
}}
409
Engine oil - grade and volume
Engine oil grade and volume for each respec-
tive engine alternative can be read in the
table.
Volvo recommends:
V70
Engine
Engine code
A
Oil grade Volume, incl. oil filter
(litres)
T6 B6304T4
Oil grade: ACEA A5/B5
Viscosity: SAE 0W–30
approx 6.8
D3 D5204T7 approx. 5.9
D4 D5204T3 approx. 5.9
D4 AWD D5244T12 approx. 5.9
D4 AWD D5244T17 approx. 5.9
D5
D5244T11
B
approx. 5.9
D5
D5244T15
C
approx. 5.9
D2 D4162T
Oil grade: ACEA A5/B5
Viscosity: SAE 5W–30
When driving under adverse conditions, use ACEA A5/B5 SAE 0W-30
approx. 3.8
||
11 Specifications
11
410
V70
Engine
Engine code
A
Oil grade Volume, incl. oil filter
(litres)
T4 B4164T Certified and factory-filled oil: Oil grade WSS-M2C925-A
options for service:
Oil grade: ACEA A5/B5
Viscosity: SAE 5W–30
approx. 4.1
T4F B4164T2 approx. 4.1
T5 B4204T11 Castrol Edge Professional V 0W-20 or VCC RBS0-2AE 0w20 approx. 5.4
D4 D4204T5 approx 5.2
A
Engine code, component and serial number can be read on the engine; see Type designations (p. 397).
B
Manual gearbox.
C
Automatic gearbox.
XC70
Engine
Engine code
A
Oil grade Volume, incl. oil filter
(litres)
3.2 AWD B6324S5
Oil grade: ACEA A5/B5
Viscosity: SAE 0W–30
approx 6.8
T6 AWD B6304T4 approx 6.8
D4 D5204T3 approx. 5.9
D4 AWD D5244T12 approx. 5.9
D4 AWD D5244T17 approx. 5.9
D5 AWD
D5244T11
B
approx. 5.9
D5 AWD
D5244T15
C
approx. 5.9
11 Specifications
11
411
XC70
Engine
Engine code
A
Oil grade Volume, incl. oil filter
(litres)
T5 B4204T11 Castrol Edge Professional V 0W-20 or VCC RBS0-2AE 0w20 approx. 5.4
D4 D4204T5 approx 5.2
A
Engine code, component and serial number can be read on the engine; see Type designations (p. 397).
B
Manual gearbox.
C
Automatic gearbox.
Related information
Engine oil - adverse driving conditions
(p. 408)
Engine oil - checking and filling (p. 356)
11 Specifications
11
412
Coolant - grade and volume
Approved coolant volume for each respective
engine alternative can be read in the table.
Prescribed grade: Coolant recommended by
Volvo mixed with 50% water
1
, see the pack-
aging.
Engine
A
Volume
(litres)
D2
D4162T
B
10.5
D2
D4162T
C
11.1
3.2 B6324S5 8.9
T6 B6304T4
D3 D5204T7
D4 D5204T3
D4 AWD D5244T12
D4 AWD D5244T17
D5 D5244T15
D5 D5244T11
T4
B4164T
B
9.2
T4F
B4164T2
B
Engine
A
Volume
(litres)
T4
B4164T
C
9.8
T4F
B4164T2
C
T5 B4204T11
8,3 (8,7
D
)
D4 D4204T5
8,9 (9,2
D
)
A
Engine code, component and serial number can be read
on the engine; see Type designations (p. 397).
B
Manual gearbox
C
Automatic gearbox
D
Applies to cars with fuel-driven heater.
Related information
Coolant - level (p. 360)
1
Water quality must fulfil the standard STD 1285.1.
11 Specifications
11
}}
413
Transmission fluid - grade and volume
The prescribed transmission fluid and volume
for each respective gearbox alternative can be
read in the table.
Manual gearbox
Manual gearbox Volume (litres) Prescribed transmission fluid
MMT6 approx. 1.7
BOT 350M3
M66
approx. 1.9 (approx. 1.45
A
)
A
Applies to the D4204T5 engine.
NOTE
For the MPS6, oil changes must take place
within certain service intervals.
For other gearboxes the gearbox oil does
not need to be changed under normal driv-
ing conditions. However, it may be neces-
sary under adverse driving conditions.
Automatic gearbox
Automatic gearbox Volume (litres) Prescribed transmission fluid
MPS6 approx 7.3 BOT 341
TF-80SC approx 7.0 AW1
||
11 Specifications
11
414
Automatic gearbox Volume (litres) Prescribed transmission fluid
TF-80SD approx 7.0 AW1
TG-81SC
approx. 6.6
A
approx. 7.5
B
AW1
A
Petrol engines
B
Diesel engines
NOTE
For the MPS6, oil changes must take place
within certain service intervals.
For other gearboxes the gearbox oil does
not need to be changed under normal driv-
ing conditions. However, it may be neces-
sary under adverse driving conditions.
Related information
Engine oil - adverse driving conditions
(p. 408)
Type designations (p. 397)
11 Specifications
11
415
Brake fluid - grade and volume
The medium in a hydraulic brake system is
called brake fluid, and it is used to transfer
pressure from e.g. a brake pedal via a master
brake cylinder to one or more slave cylinders,
which in turn act on a mechanical brake.
Prescribed grade: DOT 4
Volume: 0.6 litres
Related information
Brake and clutch fluid - level (p. 361)
Power steering fluid - grade
Power steering fluid is the denomination of
the medium used in the car's power steering
system.
Prescribed grade: Power steering fluid rec-
ommended by Volvo.
Related information
Power steering fluid - level (p. 361)
Washer fluid - quality and volume
Washer fluid is used, together with wind-
screen and rear window wipers, to keep the
car's windows and headlamps clean and
ensure visibility while driving.
Prescribed grade: Washer fluid recom-
mended by Volvo - with frost protection dur-
ing cold weather and below freezing point.
Volume:
Cars with headlamp washing: 6.5 litres.
Cars without headlamp washing: 4.5
litres.
Related information
Washer fluid - filling (p. 371)
Wiper blades (p. 369)
Wipers and washing (p. 101)
11 Specifications
11
416
Fuel tank - volume
Fuel tank volume for each respective engine
alternative can be read in the table.
Engine Volume (litres) Prescribed grade
Petrol engine approx. 70 Fuel - petrol (p. 301)
Diesel engine approx. 70 Fuel - diesel (p. 301)
Related information
Filling up with fuel (p. 299)
Engine specifications (p. 406)
11 Specifications
11
417
Fuel consumption and CO2 emissions
Fuel consumption and CO2 emissions can be
affected negatively by several causes.
Examples of this are:
If the car is equipped with extra equip-
ment that affects the car's weight.
The driver's driving style.
If the customer has specified wheels
larger than those fitted as standard on the
model's basic version, then resistance
increases.
High speed results in increased wind
resistance.
Fuel quality, road and traffic conditions,
weather and the condition of the car.
Even a combination of the above-mentioned
examples can result in significantly improved
consumption.
NOTE
Extreme weather conditions, driving with a
trailer or driving at high altitudes in combi-
nation with fuel grade are factors that
could affect the car's performance.
Related information
Economical driving (p. 305)
Weights (p. 402)
11 Specifications
11
}}
419
V70
Engine
Tyre size Speed
(km/h)
Load, 1-3 persons Max. load
ECO pressure
A
Front
(kPa)
B
Rear
(kPa)
Front
(kPa)
Rear
(kPa)
Front/rear
(kPa)
T4
T4F
T5
D2
D3
D4
225/55 R 16
225/50 R 17
0 - 160 220 210 260 260 260
160 + 260 260 270 270 -
205/60 R 16
205/55 R 17
C
215/50 R 17
D
235/40 R 18
235/40 R 19
0 - 160 230 210 260 260 260
160 + 270 270 290 290 -
Temporary Spare Tyre max. 80 420 420 420 420 -
A
Economical driving.
B
In certain countries there is the "bar" unit beside the SI unit "Pascal": 1 bar = 100 kPa.
C
Only approved for D2 Low emission variant and D4 Low emission variant.
D
Not approved for T5, D4 and D2 low-emissions variant.
||
11 Specifications
11
420
XC70
Engine
Tyre size Speed
(km/h)
Load, 1 - 3 persons Max. load
ECO pressure
A
Front
(kPa)
B
Rear
(kPa)
Front
(kPa)
Rear
(kPa)
Front/rear
(kPa)
All engines
215/65 R 16
235/55 R 17
235/50 R 18
235/45 R 19
0 - 160 230 230 260 260 260
160 + 240 240 280 280 -
Temporary Spare Tyre max. 80 420 420 420 420 -
A
Economical driving.
B
In certain countries there is the "bar" unit beside the SI unit "Pascal": 1 bar = 100 kPa.
WARNING
19-inch wheels must never be used on
cars that are not equipped with the R-
Design or Sport chassis options. The use
of 19-inch wheels on cars with standard
chassis constitutes a safety risk, with a
risk of vehicle damage, and it impairs the
car's driving characteristics.
Related information
Tyres - dimensions (p. 320)
Tyres - air pressure (p. 318)
Type designations (p. 397)
12 Alphabetical Index
12
422
A
ACC – Adaptive cruise control................. 201
Active Bending Lights (ABL)...................... 92
Active chassis - FOUR-C......................... 192
Active main beam...................................... 90
Active Xenon headlamps........................... 92
Active Yaw Control.................................. 192
Adapting driving characteristics...... 192, 254
Adaptive Cruise Control........................... 201
change cruise control functionality..... 210
deactivate........................................... 208
fault tracing......................................... 213
function............................................... 202
managing speed................................. 205
overtaking........................................... 207
overview.............................................. 204
radar sensor........................................ 210
setting the time interval...................... 206
standby mode..................................... 206
temporary deactivation....................... 206
Additional heater
electric........................................ 148, 149
fuel-driven........................................... 148
Adjusting the steering wheel...................... 84
Airbag
activating/deactivating, PACOS........... 32
driver's side.................................... 30, 38
passenger side......................... 31, 32, 38
AIRBAG ............................................... 30, 31
Airbag system............................................ 29
warning symbol.................................... 28
Air cleaning
material............................................... 130
passenger compartment.... 128, 129, 130
Air conditioning........................................ 137
Air conditioning system
repair................................................... 362
Air distribution.......................................... 131
Recirculation....................................... 138
table.................................................... 140
Air quality system IAQS........................... 130
Alarm........................................ 187, 188, 189
alarm indicator.................................... 188
alarm signals....................................... 189
automatic re-arming........................... 188
checking the alarm............................. 170
reduced alarm level............................ 189
remote control key not working.......... 188
Alcohol lock............................................. 256
Allergy and asthma inducing substances. 129
All Wheel Drive, (AWD)............................. 277
All Wheel Drive (AWD).............................. 277
Approach lighting.............................. 96, 168
Automatic car washes............................. 390
Automatic gearbox.......................... 270, 274
manual gear positions (Geartronic)..... 271
towing and recovery........................... 312
trailer................................................... 307
Automatic relocking................................. 180
AWD, All Wheel Drive............................... 277
B
Backrest..................................................... 80
front seat, lowering............................... 80
Backrest rear seat, lowering...................... 82
Bag holder .............................................. 158
Battery............................................. 297, 371
jump starting....................................... 267
maintenance....................................... 371
overload.............................................. 297
remote control key/PCC..................... 174
symbols on the battery....................... 373
warning symbols................................. 373
Bioethanol E85........................................ 303
BLIS................................................. 250, 251
Bonnet, opening...................................... 353
12 Alphabetical Index
12
423
Book service and repair........................... 348
Booster seat
lowering................................................ 50
raising................................................... 49
seating position.................................... 48
Brake and clutch fluid.............................. 361
Brake fluid
grade and volume............................... 415
Brake light.................................................. 93
Brakes.............................................. 290, 291
Anti-lock braking system, ABS........... 291
brake light............................................. 93
brake system.............................. 290, 291
Emergency Brake Assistance, EBA ... 291
emergency brake lights........................ 93
filling brake fluid.................................. 361
handbrake........................................... 292
symbols in the combined instrument
panel................................................... 290
Bulbs, see Lighting.................................. 363
C
Camera sensor................................ 221, 232
Car care................................................... 390
Leather upholstery.............................. 393
Cargo area
cargo cover......................................... 162
lighting.................................................. 95
mounting points.................................. 157
protective net...................................... 159
Cargo cover............................................. 162
Car key memory...................................... 165
Car upholstery......................................... 393
Car washing............................................. 390
Catalytic converter................................... 303
Recovery............................................. 312
Chassis settings...................................... 192
Checking the engine oil level................... 355
Children
child safety locks.................................. 41
child seat and airbag............................ 47
child seats and side airbags................. 35
location in car....................................... 47
safety.............................................. 35, 41
Child safety locks............................ 185, 186
Child seat
integrated two-stage booster seat....... 48
Child seats................................................. 41
ISOFIX fixture system for child seats... 51
recommended...................................... 42
size classes for child seats with ISO-
FIX fixture system................................. 51
types..................................................... 53
upper mounting points for child seats.. 55
City Safety™............................................ 219
Cleaning
automatic car wash............................ 390
car washing........................................ 390
rims..................................................... 391
seatbelts............................................. 393
upholstery........................................... 393
Clean Zone Interior Package (CZIP)........ 129
Climate control
actual temperature............................. 128
auto-regulation................................... 136
general................................................ 127
personal preferences.......................... 130
sensors............................................... 128
temperature control............................ 136
Clock, adjustment...................................... 73
CO
2
emissions......................................... 417
Collision..................................................... 39
Collision warning............................. 226, 227
Collision warning system
function............................................... 227
general limitations............................... 231
operation............................................. 230
Pedestrian detection........................... 229
Radar sensor.............................. 210, 219
12 Alphabetical Index
12
424
Collision Warning System with Auto
Brake....................................................... 226
Colour code, paint................................... 394
Combined instrument panel................ 63, 64
Compass................................................. 107
calibration........................................... 108
Condensation in headlamps.................... 390
Controls, lights........................................... 86
Control symbols................................... 64, 66
Coolant
volume and grade............................... 412
Coolant, checking and filling................... 360
Cooling system........................................ 296
overheating......................................... 296
Crash, see Collision................................... 39
Cruise control.......................................... 199
deactivate........................................... 201
managing speed................................. 199
resume set speed............................... 201
temporary deactivation....................... 200
Cyclist detection...................................... 228
CZIP (Clear Zone Interior Package)......... 129
D
Daytime running lights............................... 88
Deadlock.................................................. 184
deactivation........................................ 184
temporary deactivation....................... 185
Defroster.................................................. 137
Detachable towbar
storage................................................ 308
Diesel....................................................... 301
run out of fuel..................................... 302
Diesel particle filter.................................. 304
Dimensions.............................................. 400
Dipstick, electronic.......................... 357, 358
Direction indicator..................................... 94
Direction indicators.................................... 94
direction of rotation................................. 317
Disengaging the gear selector inhibitor... 276
Display lighting.......................................... 87
Distance Warning.................................... 216
Limitations.......................................... 217
Symbols and messages..................... 218
Door mirrors............................................. 105
Driveable punctured tyres........................ 332
Driver Alert Control.................................. 236
operation............................................. 237
Driver Alert System.................................. 236
Driving...................................................... 298
cooling system.................................... 296
with a tailer......................................... 306
with the tailgate open......................... 297
Driving in water........................................ 296
Driving with a trailer
towball load........................................ 403
towing capacity.................................. 403
E
ECC, electronic climate control............... 133
Eco Cruise............................................... 288
EcoGuide................................................... 67
Ecolabelling, FSC, owner's manual........... 23
Economical driving.................................. 305
ECO pressure.......................................... 418
Electrical socket...................................... 154
cargo area........................................... 158
Electrical system...................................... 377
Electric parking brake
low battery voltage............................. 292
Electronic climate control - ECC............. 133
12 Alphabetical Index
12
425
Emergency equipment
first aid kit........................................... 327
warning triangle.................................. 326
Emergency puncture repair............. 335, 336
action.................................................. 337
inflating the tyres................................ 340
rechecking.......................................... 339
Emergency puncture repair kit
location............................................... 336
overview.............................................. 336
sealing fluid......................................... 340
Emissions of carbon dioxide................... 417
Engine
deactivate........................................... 262
overheating......................................... 306
start..................................................... 261
Start/Stop........................................... 279
Engine and passenger compartment heater
messages........................................... 146
timer.................................................... 144
Engine block heater......................... 142, 266
Engine block heater and passenger com-
partment heater
direct start.......................................... 143
immediate stop................................... 144
Engine braking, automatic....................... 278
Engine compartment
coolant................................................ 360
oil........................................................ 355
overview.............................................. 353
power steering fluid............................ 361
Engine oil......................................... 355, 408
adverse driving conditions.................. 408
filter..................................................... 355
grade and volume............................... 409
Engine specifications............................... 406
Error messages
Adaptive Cruise Control..................... 214
Driver Alert Control............................. 238
Lane Departure Warning..................... 242
see Messages and symbols....... 214, 294
Error messages in BLIS........................... 253
ERS - Remote Start................................. 263
exhaust gases, toxic, sucked in.............. 297
External dimensions................................ 400
F
Fan
ECC.................................................... 136
Fault tracing for the camera sensor......... 222
First aid.................................................... 327
First aid kit............................................... 327
Flexifuel.................................................... 266
Fluids, capacities............. 412, 413, 415, 416
Fluids and oils.......................... 412, 413, 415
Fog lamp
rear........................................................ 92
Foot brake....................................... 290, 291
FOUR-C - Active chassis......................... 192
FSC, ecolabelling....................................... 23
Fuel.......................................... 300, 301, 303
fuel consumption................................ 417
fuel economy.............................. 318, 319
fuel filter.............................................. 302
Fuel-driven heater
timer.................................................... 144
Fuelling
filling................................................... 299
fuel cap............................................... 299
fuel filler flap....................................... 299
fuel filler flap, manual opening............ 299
Fuel tank
volume................................................ 416
Fuse box.................................................. 378
Fuses....................................................... 378
cargo area........................................... 387
changing............................................. 378
cold zone............................................ 388
engine compartment.......................... 379
12 Alphabetical Index
12
426
General............................................... 378
Start/Stop........................................... 388
under glovebox........................... 383, 385
G
Gearbox........................................... 268, 269
automatic.................................... 270, 274
manual................................................ 269
Gear indicator.......................................... 269
Gear selector inhibitor............................. 276
Gear selector inhibitor, mechanical disen-
gagement................................................. 276
Geartronic................................................ 271
Glass
laminated/reinforced............................. 23
Glovebox................................................. 153
locking................................................ 181
Gross vehicle weight............................... 402
GSI - Gear selector assistance................ 269
H
Handbrake............................................... 292
Hazard warning flashers............................ 93
HDC......................................................... 278
Headlamp control...................................... 86
Headlamp levelling.................................... 87
Headlamp pattern, adjusting..................... 97
Headlamp pattern adjustment................... 97
Active Bending Lights .......................... 97
Halogen headlamp............................... 97
Headlamps............................................... 363
head restraint
centre seat, rear.................................... 82
lowering.......................................... 82, 83
Heated washer nozzles............................ 102
Heating
rearview and door mirrors.................. 106
rear window........................................ 106
seats................................................... 134
steering wheel....................................... 85
windscreen......................................... 106
Heat-reflecting windscreen........................ 19
High engine temperature......................... 306
High-pressure headlamp washing........... 102
Hill Descent Control................................. 278
Hill Start Assist........................................ 277
Home safe light duration........................... 96
Horn........................................................... 85
I
IAQS - Interior Air Quality System........... 130
Immobiliser.............................................. 166
Indicator symbols...................................... 68
Inflatable curtain.................................. 35, 38
Information button, PCC.................. 169, 170
Information display.............................. 63, 64
Inlaid mats............................................... 154
Instrument lighting, see Lighting................ 87
Instrument overview
left-hand drive car................................ 57
right-hand drive car.............................. 60
Instruments and controls..................... 57, 60
Interior Air Quality System (IAQS)
Air cleaning......................................... 130
Interior lighting, see Lighting..................... 95
Interior rearview mirror............................. 107
automatic dimming............................. 107
Intermittent wiping................................... 101
Internet-connected car
book service and repair...................... 348
12 Alphabetical Index
12
427
J
Jack......................................................... 327
Journey statistics..................................... 125
Jump starting........................................... 267
K
Kerb weight.............................................. 402
Key................................................... 164, 166
Key blade......................................... 171, 172
Keyless drive.... 175, 176, 177, 178, 179, 261
Keyless - locking..................................... 177
Keyless start (keyless drive)..... 175, 176,
177, 178, 179, 261
Keyless - unlocking................................. 178
Keypad in the steering wheel.................... 84
Key positions............................................. 78
L
Labels...................................................... 397
Laminated glass......................................... 23
Lamps, see Lighting................................ 362
Lane Departure Control................... 239, 240
Lane keeping assistant
operation..................................... 240, 241
Laser sensor............................................ 223
Leather upholstery, washing instructions 393
Light indications, PCC............................. 170
Lighting.................................................... 362
Active Xenon headlamps...................... 92
approach lighting.......................... 96, 168
automatic lighting, passenger com-
partment............................................... 95
bulbs, specifications........................... 368
controls................................................. 95
daytime running lights.......................... 88
display lighting...................................... 87
headlamp levelling................................ 87
home safe lighting................................ 96
instrument lighting................................ 87
in the passenger compartment............. 95
main/dipped beam............................... 89
position/parking lamps......................... 87
rear fog lamp........................................ 92
tunnel detection.................................... 88
Lighting, bulb replacement...................... 363
bulb holder, rear................................. 366
cargo area........................................... 367
dipped beam (cars with halogen head-
lamps)................................................. 365
direction indicators, front.................... 366
main beam (cars with active xenon
headlamps)......................................... 365
main beam (cars with halogen head-
lamps)................................................. 365
number plate lighting.......................... 367
vanity mirror........................................ 367
Loading
cargo area........................................... 155
General............................................... 155
long load............................................. 156
mounting points.................................. 157
roof load............................................. 157
Lock
locking................................................ 180
unlocking............................................ 180
Lockable wheel bolts............................... 321
Lock confirmation ................................... 166
Locking/unlocking
glovebox............................................. 181
inside.................................................. 180
tailgate................................................ 182
M
Main/dipped beam, see Lighting............... 89
Main beam, automatic activation.............. 90
12 Alphabetical Index
12
428
maintenance
Rustproofing....................................... 392
Manual gearbox....................................... 269
GSI - Gear selector assistance........... 269
Towing and recovery.......................... 312
trailer................................................... 307
Manual gear positions (Geartronic).......... 271
Max. roof load.......................................... 402
Memory function in seat............................ 81
Menus
Combined instrument panel............... 110
menu overview.................................... 111
Messages................................................ 113
Information display............................. 112
Messages and symbols
Adaptive Cruise Control..................... 214
Collision Warning with Auto
Brake.......................................... 225, 234
Driver Alert Control............................. 238
Engine block heater and passenger
compartment heater........................... 146
Lane Departure Warning..................... 242
Messages in BLIS.................................... 253
Meters
fuel gauge....................................... 63, 65
speedometer................................... 63, 65
tachometer..................................... 63, 65
misting
attending to the windows................... 127
Misting
condensation in headlamps............... 390
Mood lighting............................................. 96
MY CAR................................................... 113
O
Oil, see also Engine oil..................... 408, 409
Oil level low.............................................. 355
Output...................................................... 406
outside temperature gauge....................... 72
Overheating............................................. 306
Owner's manual, ecolabelling.................... 23
P
PACOS....................................................... 32
Paddle on the steering wheel.................... 84
Paintwork
colour code......................................... 394
damage and touch-up........................ 394
Panel lighting............................................. 87
Panic function.......................................... 168
Park Assist............................................... 243
backward............................................ 244
fault indicator...................................... 246
function............................................... 243
parking assistance sensors................ 246
Park assist camera.................................. 247
settings............................................... 249
Parking brake........................................... 292
Passenger compartment filter................. 129
Passenger compartment heater.............. 142
PCC – Personal Car Communicator
functions............................................. 167
range........................................... 170, 175
Pedestrian detection................................ 226
Personal Car Communicator................... 170
Petrol grade............................................. 301
Pinch protection, sunroof........................ 110
Polishing.................................................. 391
Position/parking lamps.............................. 87
Power guide............................................... 67
Power operated tailgate.......................... 183
Power seat................................................. 81
Powershift gearbox.......................... 274, 312
Power steering fluid
grade................................................... 415
Power sunroof......................................... 109
12 Alphabetical Index
12
429
Power windows....................................... 103
Privacy locking......................................... 172
Protective grille........................................ 160
Protective net........................................... 160
Q
Queue Assist............................................ 208
Queue Assistant....................................... 208
R
Radar sensor........................................... 202
Limitations.................................. 210, 211
Rain sensor.............................................. 101
Rear bulbs
location............................................... 366
Rear seat
Heating............................................... 134
Rearview and door mirrors
compass............................................. 107
door.................................................... 105
electrically retractable......................... 105
heating................................................ 106
interior................................................. 107
Rear window
heating................................................ 106
Recommendations during driving............ 298
Recommended child seats
table...................................................... 42
Recovery.................................................. 314
Refrigerant............................................... 362
Regeneration........................................... 304
Relay/fuse box, see Fuses....................... 378
Remote control immobiliser..................... 167
Remote control key................. 164, 165, 166
battery replacement............................ 174
detachable key blade................. 171, 172
functions............................................. 167
loss..................................................... 164
range........................................... 169, 175
Remote control key system, type appro-
val............................................................ 189
Remote Start - ERS................................. 263
Resetting, trip meter........................ 118, 122
Resetting the door mirrors....................... 105
Resetting the power windows................. 104
Retractable power door mirrors............... 105
Reverse gear inhibitor.............................. 269
Road sign information............................. 196
Limitations.......................................... 198
operation............................................. 196
Roof load, max. weight............................ 402
Rustproofing............................................ 392
S
Safety lock
children................................................. 41
Safety mode.............................................. 39
moving the car...................................... 41
start attempt......................................... 40
Sealing fluid............................................. 340
Seat, see Seats.......................................... 80
Seatbelt...................................................... 25
loosen................................................... 26
pregnancy............................................. 27
putting on............................................. 26
rear seat................................................ 27
seatbelt reminder.................................. 27
seatbelt tensioner................................. 28
Seatbelt reminder...................................... 27
Seatbelt tensioner................................ 28, 38
Seats.......................................................... 80
head restraints, rear.............................. 82
heating................................................ 134
12 Alphabetical Index
12
430
Heating............................................... 134
lowering the front backrest................... 80
lowering the rear backrest.................... 82
power.................................................... 81
ventilated front seats.......................... 135
Securing loads (Loading)......................... 157
Self Supporting run flat Tyres (SST)........ 332
Sensus....................................................... 77
Service position....................................... 369
Service programme................................. 348
Set time interval....................................... 216
Side airbag SIPS.................................. 34, 38
SIPS airbag................................................ 34
Skidding................................................... 298
slippery driving conditions....................... 298
Soot filter................................................. 304
SOOT FILTER FULL................................. 304
spare wheel............................................. 322
installation........................................... 325
Speed ratings, tyres................................. 321
Spin control............................................. 192
Stability and traction control system 192,
194
operation............................................. 193
Stability system....................................... 192
Stains....................................................... 393
Start/Stop................................................ 279
function and operation....................... 280
the engine does not stop.................... 281
Steering force, speed related.................. 254
Steering force level, see Steering force... 254
Steering lock............................................ 262
Steering wheel........................................... 84
heating.................................................. 85
keypad.................................................. 84
paddle................................................... 84
steering wheel adjustment.................... 84
Stone chips and scratches...................... 394
Storage spaces
glovebox............................................. 153
tunnel console.................................... 153
Storage spaces in the passenger com-
partment.................................................. 151
Sunroof
opening and closing........................... 109
pinch protection.................................. 110
sunscreen........................................... 110
ventilation position.............................. 109
Sunscreen, sunroof.................................. 110
Switching off the engine.......................... 262
Symbols
indicator symbols..................... 64, 66, 68
warning symbols............................. 64, 66
Symbols and messages
Adaptive Cruise Control..................... 214
Collision Warning with Auto
Brake.......................................... 225, 234
Driver Alert Control............................. 238
Lane Departure Warning..................... 242
System
tripping.................................................. 38
T
Tailgate.................................................... 183
close................................................... 183
Locking/unlocking.............................. 182
Open................................................... 183
power.................................................. 183
Temperature
actual temperature............................. 128
Temperature control................................ 136
TM - Tyre Monitor.................................... 333
Tools........................................................ 326
Total airing function......................... 127, 181
Towbar
detachable, attachment...................... 309
detachable, removal........................... 311
Towbar, see Towing equipment.............. 308
12 Alphabetical Index
12
431
Towbar - detachable
attachment/removal.................... 309, 311
Towing..................................................... 312
towing eye.......................................... 313
Towing bracket........................................ 308
specifications...................................... 308
Towing capacity and towball load........... 403
Towing eye.............................................. 313
TPMS - Tyre Pressure Monitoring... 328, 330
Traction control........................................ 192
Trailer....................................................... 306
cable................................................... 306
driving with a trailer............................ 306
Transmission............................................ 269
Transmission oil
volume and grade............................... 413
Transponder.............................................. 19
Tread depth............................................. 322
Tread wear indicators.............................. 318
Trip computer.......... 114, 116, 120, 124, 125
Trip meter.................................................. 72
Trip meter, resetting........................ 118, 122
Troubleshooting
Adaptive Cruise Control..................... 213
Tunnel console........................................ 153
12 V socket......................................... 154
cigarette lighter and ashtray............... 153
Tunnel detection........................................ 88
Type approval
radar system....................................... 254
remote control key system................. 189
tyre pressure monitoring..................... 341
Type designations................................... 397
Tyre dimension........................................ 320
Tyre load index........................................ 320
Tyre pressure label.................................. 318
Tyre pressure monitoring......... 328, 330, 333
Adjust.................................................. 329
arming................................................. 331
deactivate........................................... 331
driveable punctured tyres (SST)......... 332
low tyre pressure................................ 333
recommendations............................... 331
Tyres
direction of rotation............................ 317
maintenance....................................... 316
pressure...................................... 318, 418
puncture repair................................... 335
specifications...................................... 418
tread depth......................................... 322
tread wear indicators.......................... 318
tyre pressure monitoring..... 328, 330, 333
winter tyres......................................... 322
U
Unlocking
from the inside.................................... 180
from the outside................................. 180
Unlocking with the key blade................... 178
V
Vanity mirror...................................... 95, 154
Ventilation................................................ 131
Vibration damper..................................... 308
Volvo ID..................................................... 20
Volvo Sensus............................................. 77
12 Alphabetical Index
12
432
W
Warning lamp
Adaptive Cruise Control..................... 202
collision warning system.................... 230
stability and traction control system.. 192
Warning lamps
Airbags – SRS....................................... 70
alternator not charging......................... 70
Fault in brake system........................... 70
Low oil pressure................................... 70
Parking brake applied........................... 70
seatbelt reminder............................ 27, 70
Warning................................................ 70
Warning sound
collision warning system.................... 230
Warning symbols........................... 64, 66, 70
Warning triangle....................................... 326
Washer fluid
volume................................................ 415
Washer fluid, filling................................... 371
Washer nozzles, heated........................... 102
Washers
rear window........................................ 102
washer fluid, filling.............................. 371
windscreen......................................... 102
Water and dirt-repellent coating.............. 392
Water-repellent surface, cleaning............ 392
Waxing..................................................... 391
Weights
kerb weight......................................... 402
Wheel bolts.............................................. 321
lockable.............................................. 321
Wheel rim, dimensions............................ 319
Wheel rims
cleaning.............................................. 391
Wheels
installation........................................... 325
removal............................................... 322
snow chains........................................ 322
Whiplash injury, WHIPS............................. 36
WHIPS
child seat/booster cushion................... 37
seating position.................................... 37
whiplash protection........................ 36, 38
Windows, rearview and door mirrors....... 392
Windscreen
heating........................................ 106, 137
Windscreen washing................................ 102
Windscreen wiper.................................... 101
rain sensor.......................................... 101
Winter driving........................................... 298
Winter tyres.............................................. 322
Wiper blades............................................ 369
changing............................................. 369
Cleaning.............................................. 370
replacing, rear window....................... 370
Service position.................................. 369
Wipers and washing................................ 101
TP 18295 (English), AT 1448, MY15, Printed in Sweden, Göteborg 2014, Copyright © 2000-2014 Volvo Car Corporation
23

Hulp nodig? Stel uw vraag in het forum

Spelregels
1

Forum

Volvo-V70---2015

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Volvo V70 - 2015 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Volvo V70 - 2015 in de taal/talen: Engels als bijlage per email.

De handleiding is 13,2 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Volvo V70 - 2015

Volvo V70 - 2015 Gebruiksaanwijzing - Nederlands - 454 pagina's

Volvo V70 - 2015 Gebruiksaanwijzing - Deutsch - 464 pagina's

Volvo V70 - 2015 Gebruiksaanwijzing - Français - 460 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info