INSTRUMENTS AND CONTROLS
}}
83
Insert the remote control key
1. Hold the end of the remote control key with
the detachable key blade and insert the
remote control key in the ignition switch.
2. Then press the remote control key in the
ignition switch up to its end position.
IMPORTANT
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key incor-
rectly turned - hold the end with the detacha-
ble key blade, see Detachable key blade -
detaching/attaching (p. 169).
Remove the remote control key
Grip the remote control key and pull it out from
the ignition switch.
Key positions - functions at different
levels
To enable the use of a limited number of func-
tions with the engine switched off, the car's elec-
trical system can be set in 3 different levels - 0, I
and II - with the remote control key. This owner's
manual describes these levels throughout using
the denomination "key positions".
The following table shows the functions available
in each key position/level.
Level Functions
0
•
Odometer, clock and temperature
gauge are illuminated.
•
Electrically operated seats can be
adjusted.
•
The audio system can be used for
a limited time - see the Sensus
Infotainment supplement.
I
•
Sunroof, power windows, 12 V
socket in the passenger compart-
ment, navigation, phone, ventilation
fan and windscreen wipers can be
used.
Current consumption loads the
starter battery in this key position.
II
•
The headlamps come on.
•
Warning/indicator lamps illuminate
for 5 seconds.
•
Several other systems are acti-
vated. However, electric heating in
seat cushions and the rear window
can only be activated after starting
the engine.
This key position consumes a lot of
current from the starter battery and
should therefore be avoided!
