||
MAINTENANCE AND SERVICE
660
Grip just above the blade's centre bracket
and pull diagonally down to the right until
the blade loosens from the arm.
Lift the cover for the wiper arm's bracket.
Be careful that the wiper arm does not
mistakenly fall down to the windscreen
again.
Loosen the washer hose from the bracket.
Attach the new washer hose with associ-
ated wiper blade into the bracket. Fold
down the cover for the wiper arm's
bracket.
NOTE
Make sure that the hose is routed in the
same way as in the illustration. Otherwise
it risks being pinched by the casing when it
is lowered again.
6. Press the new wiper blade into place. You
should hear a click. Check that it is firmly
installed.
7. Lower the wiper arm.
IMPORTANT
Check the blades regularly. Neglected
maintenance shortens the service life of
the wiper blades.
Related information
•
Using the rain sensor (p. 178)
•
Using windscreen and headlamp washers
(p. 180)
•
Using automatic rear windscreen wiping
when reversing (p. 182)
•
Using the rain sensor's memory function
(p. 179)
•
Using the rear window wiper and washer
(p. 181)
•
Filling washer fluid (p. 663)
•
Set the wiper blades in service position
(p. 662)
•
Replacing windscreen wiper blades
(p. 661)
•
Using windscreen wipers (p. 177)
•
Wiper blades and washer fluid (p. 177)
