MAINTENANCE AND SERVICE
}}
351
Related information
•Lamp replacement - general (p. 349)
•Lamp replacement - headlamps (p. 351)
•Lamps - specifications (p. 356)
Lamp replacement - headlamps
All of the headlamp bulbs are replaced via the
engine compartment. First loosen and remove
the whole headlamp.
NOTE
Applies to cars with halogen headlamps.
1. Lift out the bonnet stop.
2. Loosen the screw with a Torx tool, size
T30.
3. Turn the locking pin anticlockwise.
Pull out the locking pin.
4. Release the headlamp by alternately tilt-
ing and pulling it out.
IMPORTANT
Take care when lifting out the headlamp so
as not to damage any parts.
5. Press down the catch.
Unplug the connector.
Place the headlight on a soft surface so as
not to scratch the lens.
IMPORTANT
Do not pull the electrical cable, only the con-
nector.
6. Replace the relevant bulb as instructed.
The headlamp must be fitted and the contact fit-
ted correctly before switching on the lights or
changing key position.
Related information
•Lamp replacement - general (p. 349)
•Lamp replacement - location of front lamps
(p. 350)
•Lamp replacement - cover for main/dipped
beam bulbs (p. 352)
