03 Instruments and controls
03
* Option/accessory, for more information, see Introduction.
71
Key positions
The remote control key can be used to set the
vehicle's electrical system in different modes/
levels so that different functions are available;
see Key positions - functions at different lev-
els (p. 71).
Ignition switch with remote control key extrac-
ted/inserted.
NOTE
For cars with the Keyless* function the key
does not need to be inserted into the igni-
tion switch but can be stored in e.g. a
pocket. For more information on Keyless
functions, see Keyless* (p. 168).
Insert the key
1. Hold the end of the remote control key
with the detachable key blade and insert
the key in the ignition switch.
2. Then press the key in the lock up to its
end position.
IMPORTANT
Foreign objects in the ignition switch can
impair the function or destroy the lock.
Do not press in the remote control key
incorrectly turned - Hold the end with the
detachable key blade; see Detachable key
blade - detaching/attaching (p. 166).
Withdraw the key
Push the remote control key, allow it to eject,
then pull it out from the ignition switch.
Key positions - functions at different
levels
In order to enable the use of a limited number
of functions with the engine switched off, the
car's electrical system can be set in 3 differ-
ent levels (key positions) - 0, I and II - with the
remote control key. Throughout this owner's
manual these levels are described using the
denomination "key positions".
The following table shows the functions avail-
able in each key position/level.
