484419
206
Verklein
Vergroot
Pagina terug
1/206
Pagina verder
2005
S80
VOLVO
2005
VOLVO S80
TP 7537 (Portuguese). AT 0446. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2004
TP 7537
MANUAL DE INSTRUÇÕES
WEB EDITION
1
Contents
An alphabetical index is at the back of the book.
The specifications, design features and illustrations in this Owners
Manual are not binding. We reserve the right to make modifications
without prior notice.
© Volvo Car Corporation
Safety 9
Instruments, switches, controls 29
Climate control 51
Interior 63
Locks, alarm 73
Starting, driving, gearshifting 83
Wheels and tyres 109
Fuses, bulb replacement 123
Car care and Service 135
Specifications 153
Audio 165
Telephone 185
Index 199
In addition to describing the standard equipment this manual also
covers optional and extra equipment. In addition there are also
equipment alternatives, manual or automatic transmission for
example. In certain countries statutory requirements affect the level
of equipment. This means that it is occasionally necessary to page
past sections of the book which describe equipment not installed
on your car.
2
8501984d
Dashboard - left-hand drive
Tachometer .............................. 30
Automatic gearbox ................. 30
Clock ...................................... 30
Outside temperature sensor .... 30
Fuel gauge .............................. 30
Temperature gauge .................. 30
Speedometer ........................... 30
Odometer ................................ 30
Trip odometer ......................... 30
Warning symbols .................... 31
Display ................................... 35
Main/Dipped beam .................. 40
Position/Parking lamps............ 40
Fog lamps ................................ 40
Instrument lighting .................. 40
Beam length control ................. 40
Hazard warning flashers ..... 44
Electronic climate control ECC ........................... 54
Manual climate control A/C ................................ 58
Seat heating ......................................................... 44
Defroster - rear window, door mirrors ............... 44
Radio ..... 165
Steering wheel adjustment .... 41
Airbag ................................... 11
Cruise control ....................... 39
Radio keypad ........................ 171
Windscreen washers/wipers .. 40
Direction indicator lever ....... 41
Trip computer ....................... 38
3
Dashboard - right-hand drive
8502061d
Radio ..... 165
Main/Dipped beam .................. 40
Position/Parking lamps ............ 40
Fog lamps ................................ 40
Instrument lighting .................. 40
Beam length control ................. 40
Electronic climate control ECC ........................... 54
Manual climate control A/C ................................ 58
Seat heating ......................................................... 44
Defroster - rear window, door mirrors ............... 44
Steering wheel adjustment .... 41
Airbag ................................... 11
Cruise control ....................... 39
Radio keypad ........................ 171
Windscreen washers/wipers .. 40
Direction indicator lever ....... 41
Trip computer ....................... 38
Automatic gearbox ................. 30
Clock ...................................... 30
Outside temperature sensor .... 30
Fuel gauge .............................. 30
Temperature gauge .................. 30
Speedometer ...........................30
Odometer ................................ 30
Tripodometer .......................... 30
Warning symbols ....................31
Display ................................... 35
Tachometer .............................. 30
Hazard warning
flashers ....................... 44
4
8502000d
Interior - left-hand drive
Doors and Locks ..................... 74
Alarm ....................................... 79
Power windows ...................... 46
Power mirror controls ............. 47
Manual gearbox .................... 87
Automatic gearbox ............... 88
Geartronic ............................. 89
Handbrake ............................ 45
Switches in centre console ... 36
Manual adjustment of front seats ............ 64
Electrical adjustment of front seats .......... 66
Seat heating .............................................. 44
Cleaning the upholstery ........................... 139
Tipping backrests forward ....... 72
Hatch for long loads ................. 72
Tilting head restraints forward ... 37
Adjusting head restraints .......... 65
Child locks ................................ 78
Integrated booster cushion
for children ............................... 26
Glovebox ................ 68
5
8502062d
Interior - right hand drive
Glovebox ................ 68
Manual gearbox .................... 87
Automatic gearbox ............... 88
Geartronic ............................. 89
Handbrake ............................ 45
Switches in centre console ... 36
Tipping backrests forward ....... 72
Hatch for long loads ................. 72
Tilting head restraints forward ... 37
Adjusting head restraints .......... 65
Child locks ................................ 78
Integrated booster cushion
for children ............................... 26
Manual adjustment of front seats ............ 64
Electrical adjustment of front seats .......... 66
Seat heating .............................................. 44
Cleaning the upholstery ........................... 139
Doors and Locks ..................... 74
Alarm ....................................... 79
Power windows ...................... 46
Power mirror controls ............. 47
6
8000233d
Exterior
Tyres ........................ 110
Wheels ..................... 110
Brakes ...................... 22
Spare wheel ............. 113
Changing wheels ..... 114
Fuel filler flap ........................... 84
Refuelling ................................. 84
Economical driving ...................85
Boot lid ........................................................ 76
Replacing reversing lamp bulb ................... 131
Replacing brake lamp bulb .......................... 131
Replacing tail lamp bulb .............................. 131
Replacing direction indicator lamp bulb ...... 131
Replacing fog lamp bulb ............................. 131
Replacing number plate lighting .................. 133
Replacing main beam bulb ......... 130
Replacing dipped beam bulb ...... 130
Replacing position lamp bulb ..... 130
Replacing direction
indicator lamp bulb ..................... 131
Replacing fog lamp bulb ............ 132
Sunroof ........................ 48
Cleaning the car body .............. 138
Rustproofing............................ 136
Touching up paintwork ............ 137
7
Volvo Cars and the environment
Our environmental
philosophy
Quality, Safety and Environmental care are the
three core values which guide all the activities
of Volvo Cars. Volvo cars comply with strict
international environmental standards and are
manufactured in some of the cleanest and most
resource-efficient plants in the world. Volvo
Cars has been awarded multi-site global
certification under the ISO 14001 environmen-
tal standard, ensuring continuous improvement
in the area. All Volvo models are supplied with
an environmental product declaration - or EPD
- which enables the customer to compare the
environmental performance of different models
and engines. Visit epd.volvocars.se for more
information.
Clean inside and out
Your Volvo is designed to be clean inside and
out, a concept which means that you benefit in
two ways - from a clean cabin and a highly
efficient exhaust treatment system, which
ensures that your car saves fuel and releases a
minimum of harmful substances.
Inside, the air entering the passenger compart-
ment is filtered to protect you and your
passengers from dust, particles and pollen. A
sophisticated air quality system known as
IAQS can be added as an option to ensure that
the air supplied to the passenger compartment is
cleaner than the air outside. Consisting of an
electronic sensor and an activated carbon filter,
the system monitors the level of carbon
monoxide in the incoming air and closes the air
intakes to prevent the level in the cabin from
becoming too high - for example in heavy city
traffic, tailbacks and tunnels - while the carbon
filter traps nitrogen oxides, ground-level ozone
and hydrocarbons. In addition, to benefit
allergy sufferers, the fabrics used in the interior
comply with the provisions of the international
Öko-Tex
2
standard.
Outside, a special catalytic coating known as
PremAir®
3
is used to convert harmful ground-
level ozone in the air passing through the
radiator into pure oxygen.
A Volvo meets strict international environ-
mental demands and delivers low fuel con-
sumption to reduce emissions of greenhouse
carbon dioxide. In terms of fuel economy,
Volvo cars are highly competitive in their
respective segments.
2 An international ecological standard for
textiles
3 PremAir® is a registered trademark of
Engelhard Corporation
1
Interior Air Quality System
8
Volvo Cars and the environment
000032
4
Volvo workshops and the
environment
Regular maintenance carried out by an author-
ised Volvo workshop creates the conditions for
low fuel consumption and contributes to a
cleaner environment. Volvo service technicians
are equipped with the knowhow and tools to
ensure that your car delivers the best possible
environmental performance.
Reducing environmental
impact
We believe that our customers share our
concern for the environment. You can contrib-
ute to improving the environment by using only
ecologically approved car care products, and by
ensuring that your car is serviced and maintain-
ed according to the instructions in the owner's
manual.
The following hints will help you to do your bit
for the environment:
· Always ensure that your tyre pressures are
correct. Poorly inflated tyres increase fuel
consumption.
· Since roof racks and ski
boxes increase air resist-
ance, leading to significant-
ly higher fuel consump-
tion, they should be removed immediately
after use.
· Remove unnecessary items from the car -
the greater the load the higher the fuel con-
sumption.
· Is your car equipped with an engine block
heater? If so, use it for a few hours before
starting from cold to reduce fuel consump-
tion and exhaust emissions.
· Drive gently! Avoid accelera-
ting and braking too hard.
· Drive in the highest possible
gear - lower engine revs reduce
fuel consumption.
· Ease back on the accelerator on downhill
gradients.
· Use engine braking. Take your foot off the
accelerator and change down.
· Avoid idling. Switch off the engine in traffic
queues.
· Always dispose of envi-
ronmentally hazardous
waste, such as batteries
and oils, in an environmen-
tally safe manner. If uncer-
tain, ask your authorised
Volvo workshop for advice.
· Service your car regularly.
These hints will help you to reduce your fuel
consumption without increasing your travel
time or lessening the enjoyment of driving.
Apart from being kind to your car, you'll be
saving money - and the Earth's resources.
9
Safety
Seat belts 10
SRS (airbag) and SIPS bag (side airbag) 11
SIPS airbag 13
IC system (Inflatable Curtain) 19
WHIPS 20
Brake system 22
Stability system 24
Children in the car 25
10
Keep in mind the following:
· do not use clips or anything else that
prevents the belt from lying correctly.
· ensure the belt is not twisted or caught
on anything.
· the lap belt should sit low - not over the
abdomen.
· stretch the lap belt over the lap by pulling
the diagonal shoulder belt as illustrated
above.
Each seat belt is intended for one person only!
To release the seat belt: Press on the red button
in the lock. Allow the reel to pull the belt in.
Extending the lap belt
Seat belts
The lap belt should be low
8801947d
Use the seat belt for
all types of driving
Even hard braking can have dangerous
consequences if you are not wearing a seat belt!
Therefore, always ask your passengers to use
seat belts! Otherwise rear seat passengers may
be thrown into the front seat backrests in a
collision, injuring everyone in the car.
Use the seat belt as follows: pull the belt out
slowly and secure it by inserting the locking tab
into the lock. A loud ”click” indicates that the
belt is locked.
The belt is not normally restricted and you
can move freely.
The belt is restricted and cannot be pulled out
further:
· if it is pulled out too fast
· during braking and acceleration
· if the car leans excessively
It is important that the belt lies against the body
so it can provide maximum protection. Do not
lean the backrest too far back.
The seat belt is designed to protect in a normal
seating position.
WARNING!
If the seat belt has been exposed to large
load strain, in a collision for example, the
entire seat belt assembly including reel,
mountings, screws, and lock must be
replaced. Even if the belt appears undama-
ged some of the protective properties may
have been lost. Replace the seat belt if it is
worn or damaged.The new belt should be
type approved and intended for the same
seat as the belt being replaced.
Never modify or repair the belt yourself.
Entrust this work to an authorised Volvo
workshop.
11
Airbag (SRS) and side airbag (SIPS bag)
The airbag is housed in the centre of the
steering wheel, which is marked SRS AIRBAG.
The side airbag is above the glovebox,
marked SRS AIRBAG
The side impact airbags are installed in the
front seat backrest frames
WARNING!
Airbags (SRS) are installed as an addition to - not as a replacement
for - the standard seat belts.
The side impact airbags are supplied as an addition to the existing
SIPS* system. For maximum protection: Always wear a seat belt.
Airbag (SRS) and side airbag (SIPS bag)
To further increase interior safety, your car is equipped with airbags (SRS)
to complement the standard three point seat belt. The car is marked SRS
AIRBAG on the steering wheel and the dashboard in front of the
passenger (provided the car is equipped with a front passenger airbag).
The inflatable airbag is installed folded up in the centre of the steering
wheel. On the passenger side it is folded up in a compartment above the
glovebox.
Side airbags (SIPS bags) further increase interior safety.
of the car. The side impact airbags are installed in both front seat backrest
frames.
8801919d
8801907e
8802092M
*Side Impact Protection System
8802099m
12
Airbag (SRS)
SRS system left-hand drive
SRS system right-hand drive
SRS system
(airbags in the steering wheel and
dashboard)
The system consists of a gas generator (1) surrounded by the inflatable
airbag (2). Upon a sufficiently violent collision, a sensor (3) reacts,
activating the gas generator igniter, and the airbag inflates as it heats up.
To cushion the impact, the airbag deflates when compressed.
When this occurs, smoke escapes into the car. This is completely normal.
The entire process, including inflation and deflation of the airbag, occurs
in tenths of a second.
NOTE! If there is a collision of sufficient force, the sensor reacts,
activating the gas generator which inflates the airbag.
To cushion the impact, the airbag deflates when compressed. Smoke
escapes into the car when this occurs. This is completely normal.
The sensor reacts differently depending on the collision and whether the
front passenger and/or drivers seat belts were in use. It is therefore
important that you always lock your seat belt into the correct buckle.
Because of the aforementioned factors, certain accidents may only trigger
one (or no) airbag.
Because of the function of the airbags, their capacities are adapted to the
collision force to which the vehicle is subjected.
Seat belts and belt tensioners
Each seat belt is equipped with a pyrotechnic belt tensioner.
A small mechanism integrated in the inertia reel is triggered at the
moment of impact and tightens the belt around the body to reduce the
slack cause by soft clothes or the like. This helps the belt to catch the
occupant more effectively.
The front seat belt tensioners are only triggered if the corresponding
seat belt is fastened.
8803417d
8803418d
13
Side airbag (SIPS bag)
SIPS bag system left-hand drive
SIPS bag system right-hand
drive
SIPS bag system (side impact airbag)
The SIPS airbag system is an electronic system consisting of two main
components: the side airbag and the sensors.
The side airbags are mounted in the backrest frames of the front seats
while the sensors are located inside the centre and rear pillars.
In the event of a sufficiently violent collision the sensors react, activating
the gas generator which inflates the side airbag. The airbag inflates
between the occupant and the door panel, cushioning the impact at the
moment of collision and then deflates. The side impact airbag only
inflates on the side of the collision.
Child seat and SIPS airbag
The side airbag does not diminish the protection provided by the car to
children seated in a child seat.
A child seat or booster cushion can be placed on the front passenger seat
provided that the car does not have an activated* passenger airbag.
8803412j
8803413j
* For information on activated/deactivated
airbag (SRS), see page 17.
14
Airbag (SRS) and side airbag (SIPS bag)
Warning lamp in the combined instrument panel
3800639d
The airbag-system is continually monitored by the control module and its
warning lamp is located in the combined instrument panel.
This lamp lights when the ignition key is turned to position I, II or III. The
lamp goes out once the control module has checked that the airbag-system
is fault-free. This usually takes about 7 seconds.
WARNING!
If the airbag warning lamp remains lit or lights while driving, the
airbag system is not fully functional.
The symbol can indicate a fault in the seat belt, SRS, SIPS or IC
system. Contact an authorised Volvo workshop as soon as possible.
8801995d
TM
TM
TM
VEHICLE
SRS
9430422
FURTHERINFORMATION.
SEEOWNERSMANUALFOR
SPECIFIEDDATEBELOW.
PLACEDACCORDINGTO
SHALLBESERVICEDORRE-
MENTALRESTRAINTSYSTEM
ELEMENTSOFTHESUPPLE-
RELIABILITY,CERTAIN
SYSTEM,SIPSBAGAND
ASUPPLEMENTALRESTRAINT
THISCARISEQUIPPEDWITH
TOPROVIDECONTINUED
INFLATABLECURTAIN,
Label on seat belts with belt tensioner
This decal is located in the rear left door opening
WARNING!
Never attempt to repair any part of the airbag system yourself.
Any interference in the system could cause malfunction and serious
injury. Any work should only be carried out by an authorised Volvo
workshop.
The year and month in which you should contact your Volvo workshop
for special inspection and possible replacement of the airbags and belt
tensioners is indicated on the decal in the door pillar/pillars. If you have
any questions regarding either of these systems, contact an authorised
Volvo workshop.
15
WARNING!
Do not stick or mount your own emblems
or decals on the steering wheel or dash-
board!
Airbag (SRS) and side airbag (SIPS bag)
WARNING!
SIPS airbag
· Extra seat covers must not be used
on the front seats if they are not
Volvo Genuine covers or Volvo
approved seat covers for SIPS airbags.
· No objects or accessories may be
placed between the outer side of the
seat and the door panel because this
area may be affected by the SIPS airbag.
· Never interfere with the SIPS airbag
system.
Passenger side airbag deployment
Airbag (SRS) - passenger side
(option)
The front passenger airbag is folded into a
compartment above the glovebox.
The panel is marked SRS AIRBAG.
WARNING!
Airbag (SRS) - passenger side
· The passenger in the front seat should
never sit bent over the dashboard, at the
front of the seat, or in another abnormal
seating position. The passenger should
sit as upright as is possible and
comfortable, back against the backrest.
The seat belt should be under some
tension.
· Ensure that the passengers keep their
feet on the floor (not on the dashboard,
on the seat, in the map and newspaper
compartment, or on the side window).
· Never allow children to sit or stand in
front of the passenger seat.
· No one shorter than 140 cm should sit
in the front seat if the airbag (SRS) is
activated*.
· No objects or accessories may be
positioned or affixed on or near the
SRS panel (above the glovebox) or in
the area affected by the airbag (SRS).
· Do not place loose objects on the floor,
seat, or on the dashboard.
· Never modify the airbag system. Only
an authorised Volvo workshop may
carry out repairs.
8801889e
WARNING!
Never place a child in a child seat or on a
booster cushion in the front seat if the air-
bag (SRS) is activated*. Failure to follow
this advice could endanger the life of the
child.
* For information on activated/deactivated
airbag (SRS), see page 17.
16
Child seat and airbag (SRS)
The child could be seriously injured if sitting in
a child seat or on a booster cushion that is pla-
ced in the front seat of a car with an activated*
passenger airbag (SRS).
The rear seat is the safest place for a child
in a child seat/booster cushion if the car is
equipped with an activated* passenger
airbag (SRS).
Airbags (SRS) and child seats are not
compatible!
8801909e
Airbag (SRS)
WARNING!
Never place a child in a child seat or
on a booster cushion in the front seat
if the airbag (SRS) is activated*.
No one shorter than 140 cm should sit
in the passenger seat if the airbag
(SRS) is activated*.
Failure to follow the advice given above
can endanger the life of the child.
* For information on activated/deactivated
airbag (SRS), see page 17.
17
Activating/deactivating the front passenger airbag (SRS) (option)
PACOS (option)
The airbag (SRS) for the front passenger seat
can be deactivated.
This is necessary if a child seat is to be placed
there.
Indicator
A text message in the rearview mirror indicates
that the passenger airbag (SRS) is deactivated.
Indicator showing that the passenger airbag
(SRS) is deactivated.
Activating/deactivating
The switch is located on the passenger end of
the dashboard and is accessible when the
passenger door is open. Check that the switch
is in the required position. Volvo recommends
that that the ignition key is used to change
position. (Other items with a shape similar to a
key can be used.)
WARNING!
If the car is equipped with a front passenger
airbag (SRS), but does not have PACOS,
the airbag will always be activated.
WARNING!
Activated airbag (passenger seat):
Never place a child in a child seat or on a
booster cushion in the front passenger seat.
This also applies to persons shorter than
140 cm.
Deactivated airbag (passenger seat):
Persons taller than 140 cm must not sit in
the passenger seat.
Failure to follow the advice given above can
endanger life.
8803406m
8803403
m
PACOS (Passenger Airbag Cut-Off Switch)
18
Which position should the
switch be set to?
ON = Airbag (SRS) activated.
With the switch in this position, anyone over
140 cm can sit in the front passenger seat -
never a child in a child seat or booster cushion.
OFF = Airbag (SRS) is deactivated
With the switch in this position, a child in a
child seat or booster cushion can sit in the front
passenger seat - never anyone over 140 cm.
8803404
8803405m
WARNING!
Do not allow anyone to sit in the front
passenger seat if the text message in the
rearview mirror indicates that the airbag
(SRS) is deactivated and the airbag warning
symbol is displayed in the combined instru-
ment panel.
This indicates that there has been a severe
malfunction.
Contact an authorised Volvo workshop as
soon as possible.
Activating/deactivating the front passenger airbag (SRS) (option) (cont.)
19
Inflatable Curtain (IC)
8801966e
8801999d
Inflatable Curtain (IC system)
The IC system protects the head from blows against the car interior. The
curtain also protects against objects that the car is in collision with. The IC
system protects both those travelling in the front and outer rear seats. The
curtain is hidden inside the headlining. The IC system - inflatable curtains -
covers the upper part of the car interior next to the front and rear seats.
The IC system is activated by the SIPS system collision sensors, when the
car is hit from the side. When the IC system is activated the curtain is filled
with gas from the gas generator, which is located in the rear end of the
curtain.
Always use the safety belts!
If there are rear seat passengers, make sure the outer head restraints are
upright and that the centre head restraint is correctly adjusted for anyone
sitting there.
WARNING!
Do not screw or mount anything to the headlining, door pillars
or side panels. The intended protection may be compromised.
20
WHIPS (Whiplash Protection System)
8502213e
WHIPS
This system consists of energy absorbing backrests and specially
developed head restraints in both front seats.
WHIPS seat
WHIPS is activated in event of a collision from behind, based on the
collision angle, speed and nature of the colliding vehicle. Upon activation
the backrests of the front seats, if occupied, move backwards and the
seating position of the occupants in the front seats is altered. This
diminishes the risk of whiplash injury.
Correct seating position
For the best possible protection, you and your front seat passenger
should sit in the centre of your seats with as little distance as possible
between the head restraints and your heads.
* For information on activated/deactivated airbag (SRS), see page 17.
WHIPS and child seat
The WHIPS system does not diminish the protection provided by the car
to children seated in a child seat/booster cushion.
Provided there is no activated* passenger airbag (SRS), a child seat/
booster cushion can be placed on the front passenger seat.front seat
backrest.
WARNING!
If the seat has been exposed to a heavy load strain, for example a
collision, the WHIPS system should be inspected at an authorised
workshop. Even if the seat does not appear damaged, the WHIPS
system may have deployed without causing visible damage to the
seat. Parts of the WHIPS protective capacity may have been lost.
Allow an authorised Volvo workshop to check the system even after
minor collision from behind. Never modify or repair the seat or the
WHIPS system yourself!
8502379e
WARNING!
Never obstruct WHIPS
system functions!
· If a rear backrest has been
lowered, adjust the correspon-
ding front seat in order to
avoid contact with the lowered
backrest.
· Avoid placing boxes or sim-
ilar cargo so that they are
clamped between the rear seat
cushion and the front seat
backrest.
21
When do the airbags and curtains inflate?
In the event of a collision, the airbag-system sensor evaluates the level of
braking and deceleration caused by the collision.
Note that it is not only the deformation of the bodywork which affects
the cars sensors but also the speed reduction at the moment of impact.
This means that the SRS sensor senses those occasions when there is a
risk that occupants in the front seats may be injured by blows against the
dashboard or steering wheel.
The above applies to the SIPS system (side airbags), and inflatable
curtains except that side impact airbags and inflatable curtains are only
deployed in side-on collisions, when the car is hit by an object with
sufficient force.
NOTE! Deployment of the SRS, SIPS and IC systems occurs only once
in a collision in the relevant direction.
If the airbags have been deployed, we recommend the following:
· Have the car towed to an authorised Volvo workshop. Do not drive
the car with the airbags deployed even if the car can be driven after an
accident.
· Entrust replacement of SRS, SIPS and IC-system components to an
authorised Volvo workshop.
WARNING!
Never drive with deployed airbags! They can hinder the steering
of your car. Other safety systems may also be damaged. Intensive
exposure to the smoke and dust released when the airbags are
deployed can cause eye and skin irritation. If irritated, wash with
cold water and/or contact a doctor. The speed of deployment can, in
conjunction with the airbag fabric, cause friction burns to the skin.
WARNING!
The airbag-system control module is located in the centre console.
If the centre console has become soaked with water, disconnect the
battery cables in the cargo compartment. Have the car towed to an
authorised Volvo workshop.
Airbag (SRS), side airbag (SIPS bag) and Inflatable Curtain
22
Brake system/ABS/EBD
If a brake circuit fails
If a fault should occur in one of the
circuits it is still possible to stop the car. Press
the pedal hard once - not repeatedly. The brake
pedal can be depressed further and feels a little
softer than usual. If also requires more pressure
on the pedal to achieve a normal braking effect.
The brake servo only works when the
engine is running
If the car is rolling or being towed with the
engine switched off you must apply approxima-
tely five times more pressure on the brake pedal
than when the engine is running.
The brake pedal feels rigid and hard.
Moisture on the brake discs and brake
lining alter braking characteristics!
The brake components become wet when the
car is driven in heavy rain, through pools of
water, or when the car is washed. This alters
brake pad friction characteristics so that there is
a delay before braking effect is noticed. Depress
the brake pedal lightly from time to time when
driving long distances in rain or slush or before
parking the car in such conditions. The brake
pads are thus able to warm up and dry out. You
should also do this when driving after washing
the car or when starting in very damp or cold
weather conditions.
If the brakes are heavily loaded
When driving in the Alps or other roads with
similar characteristics, the brakes are heavily
loaded even if you are not pressing the pedal
particularly hard. Because the speed is often
low the brakes are not cooled as effectively as
when driving on flat roads.
So as not to overload the brakes shift down
and use the same gear both uphill and downhill
instead of using the brake (manual transmis-
sion). In this way engine braking is used more
effectively and the brake is only required for
short periods.
Keep in mind that the brakes are even more
heavily loaded when driving with a trailer.
ABS - Anti-lock brakes
The ABS system (Anti-lock Braking
System) is designed so that the wheels do not
lock when braking. This retains the best
possible steering response when braking. This
improves your ability to swerve to avoid
obstacles. The ABS system does not increase
your total braking capacity. However, as the
driver you have increased ability to steer and
thus better control over the car, which in turn
increases safety.
After the engine has started and reached a speed
of about 20 km/h (12 mph), a short self-test can
be both heard and felt. When the ABS system
functions, you can hear and feel pulses in the
brake pedal. This is completely normal.
NOTE! You must depress the brake pedal fully
to take maximum advantage of the ABS system.
Do not release the pedal when the ABS pulses
are felt and heard. Practice braking with the
ABS system in a suitable place.
The ABS symbol is lit and shines with a
constant glow:
· For approximately two seconds when you
start the car to test the system.
· If the ABS system has shut down due to a
fault.
23
Brake system/ABS/EBD
WARNING!
If both the BRAKE and ABS war-
ning symbols are lit, there is a risk that the
rear end will have a tendency to slide during
heavy braking. If the brake fluid reservoir
level is normal in these circumstances, you
may, very carefully, drive the car to the nea-
rest authorised Volvo workshop to have the
brake system checked.
If the level in the brake fluid reservoir is nor-
mal, drive carefully to the nearest authorised
Volvo workshop to have the brake system
checked.
If the level of brake fluid in the reservoir is below
the MIN mark, the car should not be driven until
the brake fluid has been topped up.
The reason for the loss of brake fluid must
be investigated.
Electronic Brakeforce
Distribution (EBD)
The EBD system (Electronic Brakeforce
Distribution) is an integrated part of the ABS
system. The EBD system controls the brake
force to the rear wheels so that the best possible
braking force is always available. Pulses in the
brake pedal can be felt and heard as the system
controls the brake force.
Emergency Brake Assistance (EBA)
The Emergency Brake Assistance function is
integrated in the DSTC system.
The system is designed to provide maximum
brake force immediately whenever rapid
braking is necessary.
The system detects the need for heavier braking
by registering how quickly the brake pedal is
applied.
The EBA function is active at all speeds. For
safety reasons, it cannot be switched off.
When the EBA function is activated, the brake
pedal sinks while maximum braking force is
applied.
Continue braking without releasing the brake
pedal.
The EBA function disengages when the
pressure on the brake pedal is relieved.
24
Stability system
When the stability system is in action, it may
seem like the car does not respond normally to
acceleration.
This is because the system detects the amount
of friction on the road surface and allows the
different stability system functions to operate.
The car is equipped with either STC (Stability
and Traction Control) or DSTC (Dynamic
Stability and Traction Control).
Function/system STC DSTC*
TC X X
SC X X
AYC X
Traction Control (TC)
The Traction Control function transfers power
from the spinning drive wheel to the drive
wheel which has grip by braking the spinning
drive wheel.
To increase forward traction in this situation, it
may be necessary to depress the accelerator
more than usual.
A pulsing sound is heard when Traction
Control is working.
This is completely normal. The TC function is
most active at low speeds.
It cannot be deactivated.
Spin Control (SC)
The Stability Control function prevents the
drive wheels from slipping during acceleration.
This improves road safety on slippery surfaces.
Under certain conditions, such as when driving
with snow chains or in deep snow or sand, it
may be beneficial to deactivate the SC function
to increase traction. This is done with the
STC/DSTC button.
Active Yaw Control (AYC)
The Active Yaw Control function automatically
brakes one or more wheels to stabilise the car in
the event of a skid.
If the brake pedal were to be depressed in this
situation, it would feel more rigid than usual
and a pulsing sound would be heard.
The AYC function is always active and cannot
be deactivated.
* Option on certain markets
WARNING!
The driving characteristics of the car may
change if the STC or DSTC is reduced. Al-
ways follow normal safety precautions for
cornering and driving on slippery surfaces.
25
Children should sit
comfortably and safely
Remember that children, regardless of age or
size, should always be securely strapped into the
car. Never allow a child to sit on the knee of a
passenger!
Location and equipment must be selected
with regard to the weight of the child.
Volvo’s own child safety equipment is designed
for your car. If you select Volvo equipment, you
can be sure that the mounting points and
attachments are correctly positioned and
sufficiently strong.
The smallest children should sit in rear-facing
seats. These give children up to the age of
3 - 4 years maximum protection.
NOTE! Many countries have statutory require-
ments covering where the child may be located
in the car. Find out what rules apply in the
countries you will be visiting.
Children in the car
Important tips!
When using other child safety products
available on the market it is important that the
installation instructions are carefully read and
closely followed.
These are some points that you should consider:
· The child seat should always be located
according to the manufacturers description.
· Do not attach the child seat straps to the seat
springs, rails or any of the rails and struts
under the seat which may have sharp edges.
· Allow the back of the child seat to rest
against the dashboard (provided your car is
not equipped with an activated* airbag
(SRS) on the passenger side).
· Do not allow the top portion of the child seat
to rest against the windscreen.
NOTE! If you have difficulties installing a child
safety product contact the manufacturer for
clearer installation instructions.
Seatbelts and pregnancy
It is extremely important that the seatbelt is
used correctly during pregnancy. It should be
in contact with the body. The upper part of the
seatbelt should fit between the breasts and
against the side of the abdomen. The hip
section of the seatbelt must be flat and as far
under the abdomen as possible. It must not
slide up towards the abdomen.
An expectant mother who is driving should
move the seat as far back as possible in order
to obtain the greatest possible distance between
steering wheel and abdomen. Set the steering
wheel as far forward as a comfortable driving
position allows.
WARNING!
Never place a child in a child seat or on a
booster cushion in the front seat if the air
bag (SRS) is activated*.
No one shorter than 140 cm should sit in
the passenger seat if the airbag (SRS) is
activated*.
Failure to follow the advice given above can
endanger the life of the child.
* For information on activated/deactivated
airbag (SRS), see page 17.
8803443a
26
WARNING!
If the integrated booster cushion has been
exposed to heavy load, in a collision for
example, the entire booster cushion,
including the seat belt and screws, must be
replaced. Even if the integrated booster
cushion appears undamaged some of the
protective properties may have been lost.
The booster cushion should also be
replaced if it is very worn or damaged. Note
that cushion replacement must be carried
out professionally, because it is important
for passenger saftey that the cushion is
correctly installed.Therefore, entrust
replacement and any repairs of the booster
cushion to your Volvo workshop.
If the cushion becomes dirty it should
initially be cleaned in situ. If the cushion is
so dirty that it requires separate cleaning,
the above instructions for replacing and
installing the cushion should be followed.
WARNING!
The regular armrest in the rear seat must not
be used as a booster cushion. Only Volvo’s
integrated booster cushion may
be used for this purpose.
Volvos integrated booster cushion
Integrated booster cushion for children
between 15-36 kg
Raising the booster cushion
Raise the booster cushion. The booster cushion
locks automatically in the backrest.
NOTE! See also the directions on the
booster cushion.
8801954d
8503186m
Booster cushion
Volvo’s integrated booster cushion for the centre
rear seat is specially designed to provide
optimum safety. When used with the regular
three-point seat belt, the booster cushion is
approved for children weighing between
15 and 36 kg.
When a child uses the booster cushion, the lap
belt must be positioned low across the hips - not
over the stomach.
Carefully adjust the position of the head
restraint to a suitable height for the child.
head restraint to suit the child.
27
Isofix bracket system for child seats (option)
Isofix bracket system
for child seats
The car can be equipped with an Isofix bracket
system for child seats in the outer rear seats.
Contact your Volvo dealer for further informa-
tion on child safety equipment.
8802355m
8802408m
Isofix attachment points Isofix guide
NOTE! Isofix mountings can be fitted on both
outboard sides of the rear seat. The Isofix guide
can be moved from one side to the other as
necessary.
28
Location of the child in the car
L: Suitable for certain child seats, as listed. The child seats may be vehicle-specific,
limited, half universal or universal.
B: Integrated and approved for this age group.
** For information on activated/deactivated airbag (SRS), see page 17.
Weight / Age Front seat* Centre rear seatOuter rear seats
<10 kg
(0-9 months)
9-18 kg
(9-36 months)
15-36 kg
(3-12 years)
1. Rear-facing child seat, secured with
seatbelt.
L: Type approval no. E5 03160
2. Rear-facing child seat, secured in
ISOFIX attachment.
L: Type approval no. E5 03162
3. Rear-facing child seat, secured with
seatbelt and mounting strap.
L: Type approval no. E5 03135
1. Rear-facing child seat, secured with
seatbelt and support arm.
L: Type approval no. E5 03160
2. Rear-facing child seat, secured in ISO-
FIX attachment and with support arm.
L: Type approval no. E5 03162
3. Rear-facing child seat, secured with
seatbelt, support arm and securing strap.
L: Type approval no. E5 03135
1. Rear-facing child seat, secured with
seatbelt.
L: Type approval no. E5 03161
2. Rear-facing child seat, secured in
ISOFIX attachment.
L: Type approval no. E5 03163
3. Rear-facing child seat, secured with
seatbelt and mounting strap.
L: Type approval no. E5 03135
1. Rear-facing child seat, secured with
seatbelt and support arm.
L: Type approval no. E5 03161
2. Rear-facing child seat, secured in
ISOFIX attachment and with support arm.
L: Type approval no. E5 03163
3. Rear-facing child seat, secured with seat-
belt, support arm and securing strap.
L: Type approval no. E5 03135
1. Rear-facing child seat, secured with
seatbelt, support arm and securing
strap.
L: Type approval no. E5 03135
1. Rear-facing child seat, secured with
seatbelt, support arm and securing
strap.
L: Type approval no. E5 03135
1. Booster cushion with or without
backrest.
L: Type approval no. E5 03139.
1. Booster cushion with or without backrest.
L: Type approval no. E5 03139
2. Integrated booster cushion.
B: Type approval no. E5 03140
1. Booster cushion with or without
backrest.
L: Type approval no. E5 03139
*) WARNING!
Never place a child in a child seat or on a booster
cushion in the front seat if the airbag (SRS) is acti-
vated**. Failure to follow this advice could endanger
the life of the child.
29
Combined instrument panel 30
Indicator and warning symbols 31
Messages in the display 35
Switches in the centre console 36
Trip computer 38
Cruise control 39
Headlamps, Fog lamps, Headlamp levelling, Instrument lighting 40
Direction indicators, Follow-me-home, Steering wheel adjustment 41
Windscreen wipers/washer 42
Ignition switch and steering wheel lock 43
Hazard warning flashers, Rear defroster, Heated seats 44
Parking brake, Electrical socket 45
Power windows 46
Rearview mirror/door mirrors 47
Power sunroof 48
Sun blinds 49
Laminated side windows (option), Water-repellent coating (option) 50
Instruments, switches and controls
30
Combined instrument panel
1. Temperature gauge
Displays the engine cooling system temperatu-
re. If the temperature is abnormally high and the
needle enters the red field a message is shown
in the display. Remember that extra lamps in
front of the radiator grille reduce the cooling
capacity with high outside temperatures and
high engine loads.
2. Display
The display shows information and warning
messages.
3. Speedometer
Shows the speed of the car.
4. Tripodometer, T1 and T2
The tripodometer is used for measuring shorter
distances. The right hand digit gives 100 meter
units. Depress the button for more than
2 seconds to reset. Change between the trip
odometers using one short press on the button.
5. Cruise control indicator
See page 34.
6. Odometer
The odometer indicates the total mileage of
the car.
7. Main beam on/off
8. Warning symbol
If a fault should occur, the symbol lights and a
message is shown in the display.
9. Tachometer
Gives engine speed in thousands of revolutions
per minute (RPM). The needle on the tachome-
ter must not enter the red field.
10. Automatic gearbox indicator
The selected gearshift programme is displayed
here. If you have Geartronic automatic trans-
mission and drive in manual mode, the current
manual gear is displayed.
11. Outside temperature gauge
Displays the outside temperature. When the
temperature lies between +2 °C and -5 °C, a
snowflake symbol is shown in the display. The
symbol warns of slippery road conditions.
When the car is or was stationary, the outside
temperature gauge may rend a higher reading
than is actual.
12. Clock
Turn the button to set the time.
13. Fuel gauge
When the lamp in the instrument panel lights,
approximately 8 litres of usable fuel remain in
the tank.
14. Indicator and warning symbols
15. Direction indicators - left - right
5
1
4
3 67 8
9
3800838m
10
15
2
12
11
13
14
31
Indicator and warning symbols
Warning symbol in centre
of dashboard
This symbol shines as an red or yellow light
depending on the severity of the fault discov-
ered. See next page for more information!
Red symbol
Stop the car. Read the message in the display.
Symbol and message text are shown until the
error is rectified.
Yellow symbol
Read the message in the display. Rectify.
The message text is cleared using the READ
button, see page 35, or it disappears after
2 minutes.
NOTE!
When the message text "TIME FOR
REGULAR SERVICE" is shown, the sym-
bol lamp and message text are cleared using
the READ button, or they disappear after
2 minutes.
The indicator and warning symbols light when
the ignition key is turned to driving position
(position II) before starting. This shows that the
symbols are functioning. When the engine is
started all the symbols go out. If the engine is
not started within 5 seconds all the symbols go
out except
and . Certain symbols may
not have the function indicated, depending on
car equipment. The symbol for the parking
brake goes out when the parking brake is
released.
3800839m
32
WARNING!
If both the BRAKE and ABS warning
symbols are lit up there is a risk that the rear
end will have a tendency to slide during
heavy braking.
If BRAKE and ABS warning
symbols light up at the same
time, there may be a problem
in the brake force distribution.
· Stop the car in a safe place and switch off
the engine.
· Start the car again.
· If both warning symbols go out the fault
was temporary and it is not necessary to
visit a workshop.
· If the warning symbols remain lit, check the
brake fluid reservoir level first.
· If the reservoir level is below MIN the car
should not be driven further. Have it towed
to an authorised Volvo workshop to check
the brake system.
· If the brake fluid level is normal and the
lamps remain lit, carefully drive the car to
the nearest authorised Volvo workshop to
have the brake system checked.
Warning - fault in brake system
If the BRAKE symbol lights up the
brake fluid level may be too low.
· Stop the car in a safe place and check the
brake fluid reservoir level.
· If the reservoir level is below MIN the car
should not be driven further. Have it towed
to an authorised Volvo workshop to check
the brake system.
Warning - fault in ABS system
If the ABS warning symbol lights up
the ABS system is not functioning.
The cars normal braking system continues to
function normally but without the ABS
function.
· Stop the car in a safe place and switch off
the engine.
· Start the engine again.
· If the warning symbol goes out, the fault
was temporary and it is not necessary to
visit a workshop.
· If the warning symbol remains lit, drive
carefully to an authorised workshop to
check the ABS system.
Indicator and warning symbols
33
Indicator and warning symbols
Fault in the STC or DSTC system
If the symbol comes on and the additional text
"ANTI-SKID SERVICE REQUIRED" and
you have not deactivated any of the system, this
indicates a fault in a part of the system.
· Stop the car in a safe place and switch off the
engine. Start the car again.
· If the warning symbol goes out this was just
a temporary indication fault and you do not
need to visit a workshop.
· If the warning symbol remains on, drive to
an authorised Volvo workshop to check
the system.
The indicator and warning symbols light when the ignition key is
turned to driving position (position II) before starting. This shows
that the symbols are functioning. When the engine is started all the
symbols go out. If the engine is not started within 5 seconds all the
symbols go out except
and . Certain symbols may not
have the function indicated, depending on car equipment. The
symbol for the parking brake goes out when the parking brake is
released.
3800839m
WARNING!
Under normal driving conditions, the
STC/DSTC system improves the cars road
safety, but this should not be taken as a reason
to increase speed. Always follow the usual
precautions for safe cornering and driving on
slippery surfaces.
* The STC and DSTC system is an option on
some markets
Stability system STC* and
DSTC*
The STC/DSTC system comprises several
different functions that are described in detail
on page 24.
The symbol lights and goes out
again after approx. two seconds
The symbol lights for a system check when the
car is started.
The symbol flashes
The SC function acts to prevent the cars drive
wheels from spinning. The TC function acts to
improve the cars traction.
The AYC function acts to prevent skidding.
The warning symbol shines with a
steady amber glow
TRACTION CONTROL TEMPORARILY
OFF is shown on the information display
together with the symbol.
The TC function has been temporarily reduced
due to high brake temperature.
The function is automatically reactivated when
brake temperature returns to normal.
The warning symbol shines with a
steady amber glow
ANTI-SKID SERVICE REQUIRED is shown
on the information display together with the
symbol.
The STC or DSTC system has been deactivated
due to a fault.
· Stop the car in a safe place and switch off
the engine.
· Restart the engine.
If the warning symbol remains lit, drive to an
authorised Volvo workshop to have the system
checked.
34
The indicator and warning symbols light when the ignition key is
turned to driving position (position II) before starting. This shows
that the symbols are functioning. When the engine is started all the
symbols go out. If the engine is not started within 5 seconds all the
symbols go out except
and . Certain symbols may not
have the function indicated, depending on car equipment. The
symbol for the parking brake goes out when the parking brake is
released.
Fault in SRS
If the symbol remains lit or lights
while driving a fault has been found in
the SRS system. Drive to a Volvo workshop to
have it checked.
Fault in car emissions systems
Drive to a Volvo workshop to have it
checked.
Rear fog lamp
The lamp lights up when the rear fog
lamp is on.
Trailer indicator lamp
Flashes when the car and trailer
direction indicators are in use.
If the lamp does not flash, one of the direction
indicators on the trailer or car is defective.
Low oil pressure
If the lamp lights while driving,
engine oil pressure is too low. Stop
the engine immediately and check the engine oil
level.
Parking brake applied
Remember that the light only
indicates that the parking brake is
applied, not how hard. Check by pulling the
lever! You must always pull it hard enough
for the brake to fasten in a “notch”.
Generator not charging
If the lamp lights while driving,
there is probably a fault in the
electrical system. Contact a Volvo workshop.
Indicator and warning symbols
Seat belt reminder
The lamp shines until the driver connects
his/her safety belt.
Engine pre-heater (diesel)
The lamp lights to inform that the engine
is pre-heating. When the lamp goes out,
the car may be started. Only applies to diesel-
powered cars.
35
Messages in the display
A
3800648d
Messages in the display
Whenever a warning or indicator symbol lights up, a message is displayed. When you have
read and understood, press the READ button (A). Read messages are then erased from the
display and are put into the memory. The message remains in the memory until the fault is
remedied.
Very serious fault messages cannot be erased from the display. They remain in the
display until the fault is remedied.
NOTE! If a warning message interrupts when you, for example, are in the trip computer
menu or wish to use the telephone, you must first acknowledge the message by pressing the
READ button (A).
Messages stored in the memory can be read again. Press the READ button (A) if you wish
to see the stored message. You can scroll through the messages in the memory by pressing
the READ button (A). Press the READ button (A) to return read messages to the memory.
Message Significance/Action
STOP SAFELY Stop and switch off the engine. Serious risk of damage.
STOP ENGINE Stop and switch off the engine. Serious risk of damage.
SERVICE URGENT Take your car in for service immediately.
SEE MANUAL Consult your owner’s manual.
SERVICE REQUIRED Take your car in for service as soon as possible.
FIX NEXT SERVICE Have your car checked at the next service interval.
TIME FOR REGULAR SERVICE When this message is shown, the car is due for a service. When the message is displayed is affected by the
distance travelled, number of months since last service and engine running time.
1)
OIL LEVEL LOW - FILL OIL* Low engine oil level. Check and remedy as soon as possible. See page 146 for more information.
2)
OIL LEVEL LOW - STOP SAFELY* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 146.
2)
OIL LEVEL LOW - STOP ENGINE* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 146.
2)
OIL LEVEL LOW - SEE MANUAL* Low engine oil level. Stop the car safely, switch off the engine and check the oil level. See page 146.
1)
Shown together with an amber warning triangle.
2)
Shown together with a red warning triangle.
* Only applies to engine variants with oil level sensor.
36
3603559d
Switches in the centre console
Active chassis,
FOUR-C (option)
Press the button to shift
between Comfort and Sport
mode. See also page 91.
* Option on some markets
NOTE! The order of the buttons may vary.
3603554m
3603549m
3603546m
WARNING!
Remember the driving characteristics of the
car change if you deactivate the STC/DSTC
system.
The STC/DSTC
system*
This button is used to reduce or
reactivate the functions in the
STC/DSTC system.
When the LED in the button
comes on, the STC/DSTC
system is activated (if no fault
arises).
NOTE! Hold the button
depressed for at least half a
second to reduce the function of the STC/
DSTC system. The LED in the button goes out
and the text ”STC SPIN CONTROL OFF” or
”DSTC SPIN CONTROL OFF” is shown in
the display.
Reduce the system if you must use a wheel of a
different dimension than the other wheels.
The STC/DSTC system is reactivated when the
engine is started.
3603680m
BLIS - Blind Spot
Information System
(option)
Press the button to deactivate
or reactivate the function.
See page 106 for further
information.
37
Lowering outer
rear seat head
restraints (option)
- Turn the ignition key to
position I or II.
- Press the button to lower the rear head
restraints to improve visibility.
Do not lower the head restraints if either of the
outer seats is occupied.
The head restraints must be restored to an
upright position manually.
The head restraints must be in an upright
position for the rear seat backrests to be
lowered.
Retractable door
mirrors (option)
This button is used to retract
the door mirrors if they are
folded out, or to fold them out
if they are retracted.
Do as follows if a door mirror has been
accidentally folded in or out:
- Manually fold the door mirror forward as
far as possible.
- Turn the ignition key to position II.
- Fold the door mirror inward and then outward
using the button. The door mirrors have now
returned to their original fixed positions.
Auxiliary lamps
(accessory)
Use this button if the auxiliary
lamps of the car are to light
together with the main beam or
if you wish to deactivate this function. The LED
in the button is lit when the function is active.
Electric socket/
Cigarette lighter
(option)
The electric socket can be
used for various 12V
accessories, such as mobile phones or coolers.
The cigarette lighter is activated by pushing in
the button. Once the lighter is heated, the button
will pop out. Pull out the lighter to use it. For
reasons of safety, always keep the lighter in the
socket when it is not in use. The maximum
current is 10A.
NOTE! The relative positions of the buttons
can vary.
3603547m
3603550m
3603552m
3603551m
Parking assistance
(option)
The system is always
activated when the car is
started. Press the button to
deactivate/reactivate parking
assistance. See also page 93.
Locking the
boot lid
(certain countries)
Press this button in order to
lock the boot lid. The boot lid
remains locked even if the doors are unlocked
manually with the master key, the master key
remote control or the service key.
Deactivating the
deadlock function
1
and detectors
Use this button if you wish to
switch off the deadlock
function (doors cannot be opened from the
inside when locked). This button can also be
used when deactivating the alarm system
movement and tilt detectors
2
. The LED lights
when the functions are deactivated.
1. Certain countries. 2. Option
3603563m
3603555m
3603548m
Switches in the centre console
38
Speed in miles per hour7
Current speed is displayed in mph.
Current fuel consumption
Continuous information on current fuel
consumption. Fuel consumption is calculated
every second. The figure in the display is
updated every few seconds. When the car is
stationary “----” is displayed.
NOTE: The displayed value may be slightly
off if a fuel-driven heater is used.
Average fuel consumption
The average fuel consumption since the last
reset (RESET). When the ignition is switched
off, the average fuel consumption is stored and
remains until reset with the RESET button (C)
on the lever.
NOTE: The displayed value may be slightly
off if a fuel-driven heater is used.
Range to empty fuel tank
Displays the range available with the remaining
fuel, calculated using the average fuel consump-
tion over the last 30 km (18 miles) and the
quantity of fuel remaining. When the range to
empty is less than 20 km (12 miles) “----” is
displayed.
NOTE: The displayed value may be slightly
off if a fuel-driven heater is used.
Trip computer
The trip computer displays the following
information:
AVERAGE SPEED
SPEED IN MILES PER HOUR
7
CURRENT FUEL CONSUMPTION
AVERAGE FUEL CONSUMPTION
RANGE TO EMPTY FUEL TANK
Controls
In order to access the trip computer information
turn the ring(B) in steps, either forwards or
backwards. By turning again you return to the
starting point.
Average speed
The average speed since the last reset
(RESET). When the ignition is switched off,
the average speed is stored and used as the basis
of the new value when you continue driving.
This can be reset with the RESET button (C)
on the lever.
NOTE! If a warning message interrupts while
you are using the trip computer menu, you must
acknowledge the warning message. Then press
the READ button (A) to return to the trip
computer.
A
B C
3601859d
Trip computer
7. Certain countries
39
Cruise control (option)
Activating
The controls for cruise control are to the left in
the steering wheel.
Setting desired speed:
· Press the CRUISE button. “CRUISE” is
shown on the combined instrument panel.
· Touch + or - to lock the vehicle speed.
CRUISE ON appears on the combined
instrument panel.
Cruise control cannot be engaged at speeds
below 30 km/h or above 200 km/h.
2700412d
3603564
Increasing or decreasing
speed
· Increase or decrease the speed by pressing
and holding + or - .
The speed of the car when the button is
released is set as the new speed.
· A brief press (less than half a second) on +
· A temporary increase in speed (less than
one minute) using the accelerator, such as
while overtaking, does not affect the cruise
control setting. When you release the
accelerator, the car will return to the
programmed speed.
Temporary disengagement
Press 0 to disengage the cruise control
temporarily.
CRUISE will be shown on the combined
instrument panel.
The speed set earlier is stored in the memory.
The cruise control is also temporarily disenga-
ged when:
· the brake pedal or clutch pedal is depressed
· speed falls below 30 km/h when travelling
uphill
· the gear selector is moved to position N
· wheel spin or wheel lock-up occurs
· a temporary increase in speed lasts longer
than one minute.
Return to a speed
When is pressed, the car resumes the
previously set speed.
“CRUISE ON” is displayed on the combined
instrument panel.
Disengagement
Press CRUISE to disengage the cruise control.
CRUISE ON goes out on the combined
instrument panel.
40
Headlamps, Fog lamps, Beam length control, Instrument lighting
D E
A B C
3500824d
A - Headlamps and position/
parkinglamps
All lighting off.
Cars with daytime running lights:
Ignition key in position II: Dipped beam lit
(and front and rear position/parking lamps,
numberplate lighting and instrument lighting).
Dipped beam lights automatically when the
ignition key is turned to the “driving
position” and cannot be switched off.
Position/Parking lamps front and rear.
Ignition key in position 0:
all lighting off.
Ignition key in position II: headlamps (and
position/parking lamps front and rear, number-
plate lighting and instrument lighting) lit.
NOTE! The light switch must be turned to
position
for the main beam to be turned on.
B - Beam length control
Certain models are equipped with an actuator
motor at each headlamp in order to control the
headlamp beam length with different loads in
the car. Beam length is controlled using the
beam length control in the dashboard.
Cars with Bi-Xenon lighting (option) do not
have control B because headlamp levelling is
automatic.
C - Instrument lighting
Move the control upward - brighter lighting
Move the control downward - dimmer lighting
D - Front fog lamps
Ignition key in position II. Press the button.
The fog lamp lights in combination with the
parking lamps. The LED in the button lights
when the fog lamp is lit.
NOTE! In certain countries, dipped beam may
not be used in conjunction with fog lamps.
E - Rear fog lamps
Ignition key in position II. Press the button.
The rear fog lamps light in combination with
the main/dipped beam. The LED in the button
and the symbol in the combined instrument
panel light at the same time.
Please remember: Regulations for use of front
and rear fog lamps vary from country to
country.
Cars with daytime running
lights
Before trips to certain countries, your Volvo
workshop can help you deactivate the daytime
running lights.
41
Direction indicators, Follow-me-home, Steering wheel adjustment
WARNING!
Adjust the steering wheel before driving,
never while driving. Ensure that the steering
wheel is locked.
Direction indicators, main/
dipped beam switch and
mainbeam flash
1 “Resistance point position”
For turns requiring small steering adjust-
ments (lane changing, overtaking) move the
lever up or down and hold it with a finger.
The lever returns immediately to the neutral
position when it is released.
2 Normal turns
3 Main beam flash
Pull the lever lightly towards the steering
wheel (until you feel a slight resistance).
Main beam is lit until the lever is released.
3
1
2
1
2
6400296A
Steering wheel adjustment
The steering wheel can be adjusted both
vertically and front-rear.
Push down the control on the left-hand side of
the steering column. Then adjust the steering
wheel to the position that suits you best. Ensure
that the steering wheel fastens in a determined
position (notch). Press the control back into
place to lock the steering wheel.
3 Main/dipped beam switch
(Switch on headlamps)
Press the lever towards the steering wheel
past the “flash position” and release it
again. The headlamps change between main
and dipped beam.
Follow-me-home
Do as follows when you leave your car when
it is dark out:
· Remove the key from the ignition switch.
· Pull the left hand lever towards you (as in
main beam flash)
· Lock the doors.
The dipped beam position/parking lamps,
numberplate lighting, side marker lamps and
lamps in the door mirrors now light. These
lamps remain lit for 30, 60, or 90 seconds. The
time settings for your car can be changed by an
authorised Volvo workshop.
42
Windscreen wipers/washer
Windscreen wipers/washer
0 - The windscreen wipers are off when the
lever is in position 0. If the lever is moved
upward, the wipers swipe one stoke at a time
for as long as the lever is held up.
-Intermittent wiping. The speed of the
intermittent wipe can be adjusted and set. Twist
the ring (see 1 in illustration) upwards to
increase the wiper stroke frequency. Twist the
ring downwards to decrease the wiper stroke
frequency.
- Wipers operate at normal speed
- Wipers operate at high speed
Rain sensor (option)
The rain sensor automatically increases or
decreases the speed of the windscreen wipers
based on how much water it detects on the
windscreen.
The sensitivity of the rain sensor can be
adjusted using the ring (1).
· Turn the ring upward to increase sensitivity
or down to decrease sensitivity (there is an
extra swipe when the ring is turned upward).
On/Off
When activating the rain sensor, the ignition
key must be in at least position I and the
windscreen wiper lever must be in position 0.
To activate the rain sensor:
· press the button (2). An LED illuminates in
the button to indicate the rain sensor is
active.
To turn the rain sensor off:
· press the button (2) or
· move the lever downward to another wiper
program. If the lever is raised, the rain sensor
will remain active; the wipers make an extra
sweep and then return to rain sensor mode
when the lever is released to position 0.
3603483j
0
Important!
In an automatic car wash:
Turn off the rain sensor by pressing the
button (2) while the ignition key is in at
least position I. Otherwise, the wind-
screen wipers may start and be damaged.
The rain sensor is automatically deactivated
when the key is removed from the ignition
switch or five minutes after the ignition is
switched off.
Windscreen washer
Pull the lever towards the steering wheel to
activate the windscreen washer.
Headlamp washer
(option in certain markets)
Use of the windscreen washer automatically
activates the headlamp washer.
High-pressure wash of the headlamps
consumes a great deal of washer fluid.
To save fluid, the headlamps are only washed
every fifth time (within a ten minute period).
If ten minutes have elapsed since the last
windscreen washing, the headlamps receive a
high-pressure wash the next time the wind-
screen is washed.
Reduced washing
If only approx. one litre of washer fluid
remains in the reservoir, the supply to the
headlamps is cut off in order to prioritise
cleaning of the windscreen.
in order to prioritise cleaning of the wind-
screen.
43
Ignition and steering
wheel lock
0 Locked position
The steering wheel locks when the
ignition key is removed.
I Intermediate position -
“radio position”
Certain electrical components can be
connected. The engine electrical
system is not connected.
II Drive
The key position when driving. The
cars entire electrical system is
connected. Diesel: Wait until pre-
heating is finished. See page 84.
III Start position
The starter motor is connected. Release the key
when the engine has started. The key springs
back to the driving position automatically.
If the key is difficult to turn the front wheels are
positioned so that there is tension in the steering
wheel lock. Turn the steering wheel back and
forth while turning the key.
Ensuring that the steering wheel is locked when
you leave the car minimises the risk of theft.
Ignition keys and electronic
immobilizer
The ignition key must not hang with other keys
or metal objects on the same key ring.
The immobilizer could be inadvertently
triggered, preventing the car from being started.
Ignition switch and steering wheel lock
WARNING!
Never switch off the ignition (key in the
position 0) or pull out the ignition key
while the car is moving. This can activate
the steering lock, which makes the car
impossible to drive.
44
Hazard warning flashers, rear window defroster, heated front seats
Hazard warning flashers
The hazard warning flashers (all direction
indicators flash) should be used when you are
forced to stop or park the car where it is a
hazard or hindrance to traffic.
Please remember: Regulations for using
hazard warning flashers vary from country to
country.
Front seat heater switch
Heated front seats
If you wish to have extra heat in the front
seat(s) carry out the following:
· Press once: High heat - both LEDs in the
switch light up.
· Press once again: Low heat - one LED in
the switch lights.
· Press once again: heating switched off
(no LEDs are lit).
8702784d
3601944d
8702783d
Heated door mirrors
Rear defroster
Use the defroster to remove ice and misting
from the rear window and door mirrors.
Pressing the switch starts heating the rear
window and the door mirrors at the same time.
The LED in the switch lights. A built-in timer
automatically deactivates the door mirror
defroster after about 4 minutes and the rear
window defroster after about 12 minutes.
8702787d
Your Volvo workshop can adjust the
temperature.
45
Parking brake lever
Parking brake, Electrical socket/cigarette lighter
3601974d
64
68
72
76
80
64
68
72
76
80
3601943e
Electrical socket/
cigarette lighter
The cover should always be in position if the
socket is not being used as a power source or
as a cigarette lighter socket. The maximum
current is 10A.
Parking brake (handbrake)
The lever is located between the front seats. The
parking brake operates on the rear wheels. The
warning symbol in the combined instrument
panel lights when the brake is applied. Pull up
the lever slightly and press in the button to
release the brake.
Remember that the warning symbol in the
combined instrument panel lights even if the
parking brake is only “slightly” applied. Check
that the brake is applied correctly. Pull the
brake hard and make sure it fastens in a
“notch”
5500045e
Electrical socket for the rear seatElectrical socket at the front seat
46
Power windows
*When you have finished your trip and
removed the ignition key, you can still close or
open the windows as long as you have not
opened either of the front doors.
3601867d
The power window switches in the rear seat can
be blocked from the switch on the drivers door
switch panel. Always remember to break the
current to the power windows (that is to say
remove the ignition key and open one of the
front doors*) when you leave children in the car
unattended.
LED in the switch unlit:
The rear door windows can be operated both by
the switch in each door but also by the switch in
the drivers door.
LED in the switch lit:
The rear windows can only be operated from
the driver’s door.
Windows can be opened or closed from the
front seat two ways.
1. Press the switch gently downwards or pull it
gently upwards. The power windows go up or
down as long as the switch is affected.
2. Press the switch all the way down, or pull it
all the way up, and then release it. In this
position (AUTO-DOWN - AUTO-UP*), the
power windows open or close automatically.
If you close the front windows using the AUTO
function an integrated clamp protection is
activated if the window is blocked by any
object.
NOTE! The AUTO-UP function on the
passenger side is only available on some
markets.
The power windows are operated using the
switches in the door armrests. The ignition key
must be turned to the radio or driving position*
for the power windows to function. The
window opens when you depress the front
section of the switch and closes when you pull
up the front section of the switch.
Rear power window switches
8301395M
WARNING!
If there are children in the car:
· Remember to switch off the supply to the
power windows by removing the ignition
key if the driver leaves the car.
· Make sure that children’s and other
passengers’ hands are clear when closing
the windows.
If the rear door windows are operated from
the drivers door or with the remote
control:
· Check that none of the rear seat passen
gers are in danger of getting their hands
caught when closing the windows.
47
Rearview mirror
8301236d
Rearview mirror
A. Normal position.
B.
Dimming position. Use this if headlamps
from the cars behind irritate you.
Certain models have an autodim function,
which leads to an automatic dimming based on
current light conditions.
Seat belt reminder
The seat belt warning symbol above the
rearview mirror flashes as long as the driver’s
seat belt has not been connected.
Door mirrors
The switches for setting the two outer door
mirrors are furthest forward on the drivers
door armrest.
Press the switch. L = left door mirror.
R = right door mirror.
LED in the switch lit: Adjust the postion with
the adjustment control. When you have set the
position press the switch once. The LED
should no longer be lit.
Switches, power door mirrors
Door mirrors with memory
function (option)
If the car has door mirrors with memory
function, they work together with the memory
setting of the seat; see page 66.
NOTE! The above only applies if your Volvo
is equipped with a driver’s power seat.
Memory function in the remote control
When you unlock the car with the remote
control and change the setting of the door
mirrors, these new settings are saved in the
remote control.
The next time you unlock the car with the same
remote control and open the drivers door
within two minutes, the mirrors will assume
their stored positions.
8802799r
A
B
Important!
Use the defroster (see page 44) to remove
ice from the mirrors, not an ice scraper. The
scraper could scratch the mirror glass.
WARNING!
Adjust the door mirrors before starting off!
The outer half of each door mirror is a wide-
angle mirror that provides a better overview.
This may make objects appear farther away
than they really are.
48
8302234r
Power sunroof (option)
Power sunroof (option)
Sunroof controls are located in the headlining.
The sunroof can be opened in two different ways:
· Raise/lower trailing edge(ventilation position)
· Rearwards/forwards (opening position/
comfort position*)
The ignition key must be in position I or II.
Ventilation position
Open: Push the trailing edge of the switch (5)
upwards.
Close: Pull the trailing edge of the switch (6)
downwards.
It is possible to switch directly from the ventila-
tion position to comfort position*: pull the
control backwards to its end position (4) and re-
lease.
* In comfort position, the sunroof is not comple-
tely open in order to reduce the level wind noise.
Opening position/comfort position*
Automatic control
Move the control over the resistance point
position (3) to the rearmost end position (4) or
over the resistance point position (2) to the front
end position (1) and release. The sunroof will
open to the comfort position* or will close
completely.
Open from comfort position* to max. opening:
pull the control to the rear once more to the end
position (4) and release.
8301747m
1
2
3
4
5
6
1. Automatic closing
2. Manual closing
3. Manual opening
4. Automatic opening
5. Opening ventilation position
6. Closing ventilation position
Manual control
Open: Pull the switch rearwards to the resistance
point position (3). The sunroof will move towards
maximum opening position as long as the switch is
held in this position.
Close: Press the switch forwards to the resistance
point position (2). The sunroof will move towards
its closing position as long as the switch is held in
this position.
Pinch protection
NOTE! The sunroof pinch protection function
is activated if the hatch is blocked by an object.
If blocked, the sunroof will stop and automatic-
ally open to the previous open position. This
function will be activated only when the
sunroof is in the open position.
Make sure the sunroof is properly closed
before leaving the car.
WARNING!
Pinch protection functions only in the opening
position - not in ventilation position.
WARNING!
· Make sure that the hands of children and pas-
sengers are clear when closing the sunroof.
If there are children in the car:
· Remember to switch off the supply to the
sunroof (remove the ignition key) if the driver
leaves the car.
49
Sun screen, Sun blinds (option)
Sun blind - rear window
Pull the sun blind up from the parcel shelf and
hook it into the holes above the rear window, as
illustrated.
Sun blinds - rear side
windows
Lower the window slightly. Hook the sun blind
(A) onto the top edge of the window. You can
now raise and lower the window as you wish.
A
8301256d
Sun screen
The sunroof also has an inner manually sliding
sun screen. The sun screen slides back
automatically when the sunroof is opened.
50
Laminated side windows
(option)
The laminated windows in the front and rear
doors improve sound insulation in the passen-
ger compartment and provide better protection
against unauthorised entry.
Laminated side windows (option), Water-repellent coating (option)
Important!
· Do not use a metal ice scraper to remove
ice from the windows. The water and
dirt-repellent coating could be damaged.
· Use the defroster to remove ice from the
mirrors!
Water and dirt-repellent
coating on the front windows
and/or door mirrors (option)
The front windows and/or door mirrors are
treated with a coating that ensures that visibility
through the windows or in the mirrors is good
even if it is raining. For information on glass
care, see page 140.
Side windows and mirrors
treated with the water and/or
dirt-repellent coating are
marked with a little symbol.
Rearview mirror/door mirrors
In certain weather conditions, the function of
the dirt-repellent coating is improved if the door
mirror defroster is used; see page 44.
Defrost the door mirrors:
· if they are covered with ice or snow
· in heavy rain and dirty road conditions
· if they are misted.
51
Climate control
Air distribution 52
Your climate control system - useful hints 53
Electronic Climate Control ECC 54
Electronic Climate Control ECC with Interior Air Quality system 55
Electronic Climate Control ECC - manual settings 57
Manual climate control with air conditioning (AC) 58
Fuel-driven parking heater (option) 60
52
Air distribution
Air vents in the dashboard
A Open
B Closed
C Directing airflow laterally
D Directing airflow vertically
· Aim the outer vents towards the side
windows to remove misting.
· In cold climates: close the centre vents
for the most comfortable climate and best
demisting.
Air vents in the dashboard
8702835d
B
A
C
D
Air vents in the door pillars
A Open
B Closed
C Directing airflow laterally
D Directing airflow vertically
· Aim the vents toward the rear side windows
to remove misting.
· Aim the vents inwards into the car if you
wish to have a comfortable climate in the
rear seat.
· Bear in mind that small children are
sensitive to airflow and draughts.
Air vents in the door pillars
8702826d
C
D
D
C
B
A
8702818d
Air distribution
The incoming air is distributed through 14
different air vents located in different parts of
your car.
53
Your climate control system - useful hints
Misting on window interiors
A good way to reduce the problem of misting
on the insides of the windscreen and other
windows is to clean them. Use a normal
window cleaner. Bear in mind that you must
clean them more often if someone smokes in
the car.
Ice and snow
Remove ice and snow from the climate control
air intake (the grille between the bonnet and the
windscreen).
Particle filter
Make sure the particle filter is replaced
regularly. Consult your Volvo workshop.
Actual temperature - ECC
The temperature you select corresponds to the
physical experience with reference to air speed,
humidity, exposure to sun, etc. which affect the
interior and exterior of the car.
Sensors - ECC
The sun sensor is on the upper portion of the
dashboard. Remember not to cover it. Do not
cover the passenger compartment temperature
sensor on the climate control panel.
Side windows and sunroof
For the air conditioning (A/C) system to operate
satisfactorily the side windows and sun roof
should be closed. Also, remember not to block
the evacuation channels in the parcel shelf.
Acceleration
The air conditioning system switches off
temporarily at full acceleration. You may feel
a temporary rise in temperature.
Condensation
In warm weather conditions condensation from
the air conditioning (A/C) system may drip
under the car. This is completely normal.
Fault tracing
Your Volvo workshop has the instruments and
tools required for any fault tracing or repair of
your climate control system. Entrust checks and
repairs only to trained personnel.
Refrigerant
Refrigerant R134a is in the air conditioning
system. This contains no chlorine, which means
it is harmless to the ozone layer.
Use only R134a when topping up/refilling
refrigerant. This work should be performed by
an accredited workshop.
Fuel economy - Electronic
Climate Control (ECC)
With ECC, the air conditioning system is
controlled automatically and is used just
enough to cool the passenger compartment and
dehumidify the incoming air.
This provides better fuel economy compared to
conventional systems where the air conditio-
ning cools the air to just above freezing point.
Fan function to prevent
battery discharge
When the engine is off (or if the ignition key is
in position I or II), the fan is automatically
switched off. To activate the fan, turn the knob
and set the desired speed. After two minutes,
the fan will slow to a lower speed. This is one
way of preventing the battery from becoming
discharged when the engine is off.
54
22
18
20
26
24
8704253d
20
18
22
24
26
MAN
AUT
Electronic Climate Control ECC
Seat heater,
right-hand side
Defroster, rear window
and door mirrors
Defroster, windscreen and
side windows
Temperature,
left hand side
Passenger compartment
temperature sensor
Recirculation
AUTO
AC On/Off
Fan
Temperature
right-hand side
Seat heater left
hand side
Air distribution
Recirculation/Interior Air Quality System
55
Keep in mind the following:
· Make it a rule to have the air quality sensor
activated at all times.
· Recirculation is limited in cold climates to
avoid misting.
· In the event of misting, you should
disconnect the air quality sensor.
· In the event of the windows misting up you
can use the windscreen and side window
defroster functions. See next page.
· Follow the Volvo service programme for
the recommended interval for multifilter
replacement.The Multifilter may need to be
changed more often if you drive in heavily
polluted environments.
Electronic Climate Control ECC with Interior Air Quality system (option)
Operation:
Press
8702780d
to activate the air quality sensor
(normal setting).
Or select one of three functions by
pressing
8703250d
MAN
AUT
.
1. Press
8703250d
MAN AUT
: the LED AUT lights. The air
quality sensor is now activated.
2. Press
8703250d
MAN
AUT
: no LED lights. Recirculation
is not activated unless needed to cool.
3. Press
8703250d
MAN
AUT
: the LED MAN lights.
Recirculation is now activated.
You can switch between these three functions
by repeatedly pressing
8703250d
MAN
AUT
.
Multifilter with
Air quality sensor (option)
Some cars are equipped with a multifilter and
air quality sensor. The multifilter separates
gases and particles, thus reducing the volume of
odours and contaminants entering the car. The
air quality sensor detects increased levels of
contaminants in the outside air. When the air
quality sensor detects contaminated outside air,
the air intake is closed and the air inside the
compartment is recirculated. The multifilter also
cleans the air recirculating in the compartment.
When the air quality sensor is connected, the
green AUT LED lights in
8703250d
MAN
AUT
.
8703250d
MAN
AUT
56
Electronic Climate Control ECC
AUTO
The AUTO function regulates climate control so
that the selected temperature is attained. The
automatic function controls heating, air condition-
ing, fan speed, recirculation and air distribution. If
you select one or more functions manually, the
other functions continue operating automatically.
All manual settings are switched off when AUTO is switched on.
8702780d
Temperature
The two knobs can be used to set the temperature for
the passenger and drivers sides of the car. Remember
that it will not heat or cool any quicker even if you
select a higher or lower temperature than you wish to
have in the passenger compartment.
22
20
18
8702779d
26
24
8702782d
Defroster -
rear window and door mirrors
Use this button to quickly remove ice and misting
from the rear window and door mirrors. See
page 44 for more information about this function.
8702783d
Defroster -
windscreen and side windows
Use this button to quickly remove misting and ice
from the windscreen and side windows. The air
flows to the windows at high fan speed. The LED
in the defroster button lights when this function is
activated. The air conditioning system is now controlled so that the air is
maximally dehumidified. The air is not recirculated.
57
8702776d
AC - On/Off
When the ON LED lights the air conditioning
(A/C) system is controlled automatically by the
system. In this way incoming air is cooled and
moderately dehumidified. When AC OFF is
selected and the OFF LED lights the air conditio-
ning (A/C) system is always disconnected, other functions are still
controlled automatically. The air conditioning (A/C) system operates down
to approximately 0 °C.
When you select Defroster
the air conditioning system is controlled
so that air is maximally dehumidified.
8702777d
8702784d
Heating the front seats
See page 44 for more information
Recirculation
(see also page 58)
The best cooling in warm
climates is achieved by
selecting the AUTO function.
The recirculation is then controlled automatically. Manual recirculation can
be selected if you wish to shut out bad air, exhaust fumes etc. The air in
the passenger compartment is recirculated; no air from outside the car is
taken into the car when
is activated. The LED in the switch is lit.
If you allow the air in the car to recirculate there is a danger of misting
and icing in the car, especially during the winter.
The timer function (cars with multifilters and air quality sensors
have no timer function) minimises the risk of ice, misting and bad air.
Carry out the following to activate it. Press
for more than
3 seconds. The LED flashes for 5 seconds. The air in the car recirculates
for 3-12 minutes depending on the outer temperature. Each time you press
the timer function is activated. If you wish to switch off the timer
function, press again for more than 3 seconds. The LED lights for
5 seconds to confirm your selection.
If you select Defroster
, recirculation is always disconnected.
Press AUTO to return to automatic air distribution.
Fan
Fan speed can be increased or decreased by
turning the knob. If AUTO is selected, fan speed is
controlled automatically. The previously set fan
speed is disconnected.
NOTE! If the knob for the fan has been turned so far that the left
LED above the knob lights up with an orange light, the fan and the
air conditioning (A/C) system are switched off.
8703250d
MAN
AUT
8702781d
Air to windows.
Air to head and body.
Air to legs and feet.
Air distribution
Electronic Climate Control ECC - manual settings
8702778d
58
Manual climate control with air conditioning (AC)
AC - On/Off
(ON/OFF)
The air conditioning is
connected to the cooling and
dehumidification function
when the ON LED lights. The air conditioning is
disconnected with the OFF LED lights.
When you select Defroster
, the air conditio-
ning is always connected, unless the fan is set at
position 0.
Fan
Fan speed can be increased
or decreased by turning the
knob. If the knob is set to
0, the air conditioning is
disconnected.
Recirculation
Recirculation, together with your air conditioning
(A/C) control, helps to cool a warm cabin more
quickly. This function can also be used to exclude
bad air, exhaust fumes etc. The air in the passenger
compartment is recirculated; no air from outside the car is taken into the
car when the button
is activated. The LED in the switch is lit. If you
allow the air in the car to recirculate there is a danger of misting and icing
in the car, especially during the winter.
Heating/Cooling -
left side
Turn to adjust the heating or
coooling of the incoming air.
The air conditioning must
be connected to receive cooled
air.
Heating/Cooling -
right side
Turn to adjust the heating or
coooling of the incoming air.
The air conditioning must
be connected to receive cooled
air.
The timer function minimises the risk of ice, misting and bad air. To
activate the function: press
for more than 3 seconds. The LED flashes
for 5 seconds. The air in the car recirculates for 3-12 minutes depending
on the outer temperature. Every time you press
the timer function is
activated. If you wish to switch off the timer function, press again for
more than 3 seconds. The LED lights for 5 seconds to confirm your
selection.
Recirculation is always disconnected when you select Defroster
.
8702777d
8702831d
8702834d 8702834d
8702611d
8702776d
59
Here is some supplementary
advice and information:
· You must turn the fan knob (from the
0 position) to connect the air conditioning.
· Use the air conditioning at low temperatures
(0 - 15 °C) to dehumidify incoming air.
Defroster - rear
window and
door mirrors
Use this button to quickly
remove ice and misting
from the rear window and door mirrors. See
page 44 for more information about this
function.
Use
8702787d
8702833d
Use the air distribution control positions (marked with dots) between the
different symbols to fine-tune air distribution for maximum comfort.
8702784d
Heating the
front seats
See page 44 for more
information.
Air distribution
When you want good cooling in a
warm climate.
Air to floor and air vents.
Air to floor. There is a certain
amount of airflow to the air vents
and the defroster vents for the
windscreen and side windows.
Air to both floor and windows.
There is a certain amount of
airflow to the air vents.
Air to windows In this position the
air does not recirculate. The air
conditioning (A/C) system is always
connected. There is a certain amount
of airflow to the vents.
Air through front and rear air vents.
When you want to remove ice and misting.
High fan speed is good for this.
When you want comfortable conditions
and good demisting in a cold climate. Not
too low a fan speed.
When you want to warm your feet.
In sunny weather with cool outside
temperature.
Manual climate control with air conditioning (AC)
60
Fuel-driven parking heater (option)
A B C
3602296d
General
The electrical system must be awakened be-
fore the parking heater can be programmed.
This is most easily done by:
· pressing the READ button or
· pressing the main beam flash or
· turning on the ignition.
The parking heater can be started immediately
or set with two different start times using
TIMER 1 and TIMER 2.
Here, start time refers to the time point the car
should be completely warmed up.
Vehicle electronics calculates start time based
on current outside temperature. If the outside
temperature exceeds 25 °C, heating is not
switched on.
WARNING!
 Switch off the fuel-driven heater before
refuelling. Spilled fuel could be ignited by
the exhaust gases.
Check the information display to ensure
the heater is off (PARK HEAT ON is
shown on the display when the parking
heater is active).
parking heater runs a maximum of 60 minutes.
If the parking heater does not start despite re-
peated attempts, a message is shown on the
display. Contact an authorised Volvo work-
shop.
Messages on the display
Once the settings for TIMER 1, TIMER 2
and DIRECT START are activated, the am-
ber warning symbol in the combined instru-
ment panel lights and explanatory text is
shown on the display.
When you leave the car, you will receive a
message regarding the current settings of the
system.
Parking on a hill
If you park your car on a steep incline, the
front of the car should be facing up the slope
to ensure the supply of fuel to the parking
heater.
Car clock/timer
For safety reasons, all timer settings will be
cleared if the car clock is reset after timer
settings have been made.
WARNING!
The car must be outdoors when the petrol
or diesel heater is used.
WARNING!
AVERTISSEMENT!
ACHTUNG!
8903920d
Warning decal on fuel filler flap
At temperatures of -10 °C and below, the
61
Fuel-driven parking heater (option)
Battery and fuel
If the battery is not sufficiently charged or the
petrol tank is close to empty, the parking heater
will be switched off.
If this is the case, a message will appear on the
display. Confirm the message using the READ
button (A).
.
Important!
Repeated use of the parking heater combined
with only short journeys can discharge the
battery and impair starting.
In order to ensure that the generator receives
sufficient time to produce the amount of
energy needed without discharging the battery
as a result of regular heater use, drive the car
for a period equalling the time during which
the heater has been active.
Setting TIMER 1 and 2
For reasons of safety, you can only programme
times for the following 24 hours, not several
days in a row.
1. Use the ring (B) to toggle to TIMER 1.
2. Briefly press the RESET button (C) so
that the hours setting starts to flash.
3. Use the thumb wheel to set the desired
number of hours.
4. Briefly press the RESET button so that the
minutes setting starts to flash.
5. Use the ring (B) to set the desired minutes.
6. Briefly press the RESET button to confirm
your setting.
7. Press the RESET button to activate the
timer.
After setting TIMER 1, toggle to TIMER 2.
Settings are made the same way as for TIMER 1.
Deactivating timer-started heating
Do as follows to manually switch off the heater
before the set time has elapsed:
1. Press the READ button (A).
2. Use the ring (B) to toggle to PARK HEAT
TIMER 1 (or 2). The text ON flashes.
3. Press the RESET button (C). The text OFF
is displayed with a steady glow and the
heater is switched off.
Direct start of heater
1. Use the ring (B) to toggle to DIRECT
START.
2. Press the RESET button (C) to make ON
and OFF selections available. Select ON.
The heater will now run for 60 minutes.
Heating of the passenger compartment will
begin as soon as the engine coolant has reached
an adequate temperature.
Deactivation of heater after direct start
1. Use the ring (B) to toggle to DIRECT
START.
2. Press the RESET button (C) to make ON
and OFF selections available. Select OFF.
A B C
3602296d
Auxiliary heater (diesel)
(certain countries)
Extra heat from the additional heater may be
required in cold weather to reach the correct
temperature in the passenger compartment.
The additional heater starts automatically
when extra heat is required if the engine is run-
ning. It is switched off automatically when the
correct temperature is reached or when the
engine is switched off.
62
63
Interior
Front seats 64
Interior lighting 67
Storage compartments 68
Centre console storage compartments, Load curtain 69
Spare wheel, Warning triangle 70
Coat hanger, Cup holders in armrest 71
Long loads 72
64
Front seats
The drivers and passenger seats can be
adjusted to the optimum sitting and driving
positions.
1. Forward/rearward: Lift the handle to
adjust the distance to the steering wheel
and pedals. Check that the seat is locked
after changing position.
2. Raise/lower front edge of seat cushion:
pump up/down.*
3. Raise/lower seat: pump up/down.
4. Adjust lumbar support: turn the wheel.
5. Adjust backrest rake: turn the wheel.
6. Power seat control panel.
* The control panel (2) is not available with
certain upholstery alternatives.
WARNING!
Adjust the position of drivers seat
before setting off, never while driving.
Check that the seat is locked in position.
8504932
m
65
8502027e
Adjust the head restraint vertically
Rear seat head restraints
The centre seating position head restraint is
adjusted vertically according to the height of
the passenger. Press the head restraint up or
down as necessary. To move the head restraint
up or down, you must press the release button
behind the left-hand support. See illustration.
If the integrated booster cushion is used, the
head restraint must be carefully positioned to
suit the child.
Folding the front passenger seat, Rear seat head restraints
8501727A
Folding the front passenger seat
The front passenger seat backrest can be folded to a horizontal position
to make room for a long load. Fold the backrest as follows:
· Move the seat as far back as possible.
· Adjust the backrest to the upright position.
· Lift the catches on the rear of the backrest.
· Fold the backrest forward.
· Slide the seat forward so that the head restraint is locked in place
under the glovebox.
66
Front seats
Power seat (option)
Preparations
The seat is usually adjusted with the ignition
key is in position I or II. It can also be adjusted
within 4.5 minutes of unlocking the door with
the key or remote control. If the door is closed
but the ignition key has not yet been inserted in
the ignition switch or is in position 0 in the
ignition switch, settings can be made within 40
seconds of closing the door.
Memory function in the remote control
(option)
If the setting of the seat is changed, the new
setting is saved in the remote control used to
lock the car. The next time the car is unlocked
using that remote control and the drivers door
is opened within five minutes, the drivers seats
and door mirrors assume the stored positions.
Seat adjustment
The switches can be used to make the following
adjustments:
1. Front edge of seat cushion up/down
2. Seat forward/rearward
3. Seat up/down
4. Backrest rake
The seat can be moved in one direction at a
time.
The power seats have an overload protector
that activates if a seat is blocked by an object.
If this occurs, switch off the ignition (posi-
tion 0) and wait 20 seconds before operating
the seat again.
Seat with memory function
(option)
5. Setting seat and door mirrors, program 1
6. Setting seat and door mirrors, program 2
7. Setting seat and door mirrors, program 3
8. Storing preset positions
Three positions can be stored. After adjusting
the seat, hold the MEM (8) button depressed
while pressing the button (5). Further seat and
door mirror settings can be stored using
memory buttons (6) and (7).
Setting preset positions
Press and hold one of the memory buttons (5),
(6) or (7) until the seat stops. If you release
the button, the seat stops immediately for
safety reasons.
Emergency stop
If the seat accidentally begins to move, press
one of the buttons to stop the seat.
WARNING!
Ensure that there is nothing in front
of, behind or under the seat during
adjustment.
Make sure that none of the backseat
passengers will be trapped.
Make sure that children do not play
with the switches, to avoid the risk of
getting trapped.
8505020m
1
2
3
M
M
E
67
Interior lighting
Rear reading lampsGeneral lighting and front reading lamps
General lighting
General lighting lights up and goes out when you
press the button. General lighting comes on
automatically* and remains lit for 30 seconds:
· When you unlock the car from the outside
using the key or remote control.
· When you have stopped the engine and
turned the ignition key to position 0.
General lighting lights up and remains lit for
10 minutes:
· When one of the doors is open.
* The function is light-dependent and is only
activated when it is dark.
General lighting goes out:
· When the engine is started.
· When you lock the car from the outside
using the key or remote control.
General lighting can be switched off or on in all
situations by briefly pressing the button.
When you switch the light on, it remains lit for
10 minutes.
You can disconnect the automatic function by
pressing the button for more than 3 seconds.
When you then briefly press the button, the
automatic function reconnects.
The pre-programmed times of 30 seconds and
10 minutes can be changed. Contact an
authorised Volvo workshop.
3500887e
Vanity mirror in the sun visor
Front and rear reading lamps
Reading lamps in the front and rear seats can
be switched on or off by pressing the respective
button. Reading lamps are switched off
automatically after 10 minutes if not switched
off manually.
Vanity mirror
The lamps come on when you open the cover.
8504139
m
3501410r
68
Storage compartments
WARNING!
Make sure that no hard, sharp or heavy objects lie on or in
(or protrude from) the parcel shelf, map pocket or other
storage compartments where they might cause injury during
heavy braking. Always fasten large heavy objects with one of
the seat belts.
8504930d
69
Centre console storage compartments, Load curtain
Ashtray (option)
To empty the ashtrays:
Front seat: pull the ashtray straight upwards.
Rear seat: press the ashtray downwards and
remove.
Retaining strap in cargo
compartment (option)
The retaining strap can be used to secure lighter
objects, such as grocery bags or hand luggage.
Pull it out. It works like a seat belt and has a
locking function.
Pull the release tab to release the retaining strap
from its locked position and pull it out further.
The retaining strap can be fixed in two
positions. When securing the strap in position,
press until there is an audible click.
NOTE! If you have an extra plastic mat with
edges that go up along the sides of the cargo
compartment, you must cut a groove in the mat
so that the retaining strap can run freely.
8502003d
8501983E
Cup holder
(option)
Some models are
equipped with cup
holders for the front and rear seat occupants.
To open the cup holders in the front seats,
press the left-hand button in the centre console
to open the drivers cup holder and the cover
below to open the passenger-side cup holder.
To close the passenger-side holder after use,
the arms must be pressed inwards as indicated
by the arrows on the holder. You can also use
the storage compartment in the centre console
for cassette tapes and the like.
70
Spare wheel, Warning triangle
Warning triangle (certain countries)
Follow the regulations concerning warning triangles of the country you are
in. Carry out the following when the warning triangle is required for use:
· Turn both attachment screws to the vertical position.
· Carefully remove the warning triangle case.
· Remove the warning triangle from its case (A).
· Fold out the four support legs on the warning triangle.
· Fold out and secure the two remaining sides of the warning triangle.
· Place the warning triangle in a suitable position. Think about the
position of the car and the traffic.
After use:
· Pack everything in reverse order.
· Make sure the warning triangle and its case are properly secured in
the boot lid.
8901312d
A
Floor support
Warning triangle
Spare wheel, tools, jack
The spare wheel with the jack and tool kit can be found under the floor
of the cargo compartment. Carry out the following to remove the spare
wheel:
· Fold the floor inwards.
· Lift and remove the floor support that sits in the spare wheel moun-
ting. Cars with a Temporary Spare also have a floor support in the
rear left-hand corner of the cargo compartment. Pull the support
upwards to facilitate removing the spare wheel.
· Lift out the jack and tool kit.
· Unscrew the mounting and lift out the spare wheel.
· Return and secure everything in the reverse order. Make sure that the
spare wheel is fixed in place and that the jack and tool kit are
properly secured with the straps on the mounting.
Tool kit with
towing eye
Jack
Mounting
Spare wheel
Floor support
7700231d
Jack
71
Coat hanger
The coat hanger is only intended for light
garments.
8503126m
Coat hanger, Cup holders in armrest
8504929
m
Cup holders in the rear seat
armrest
72
Long loads
Tipping the backrests forward
One or both of the rear seat backrests can be
folded down from the cargo compartment for
transporting long objects. Pull the handle(s) in
the cargo compartment. The head restraints
must be in the upright position. Then tip the
backrest or backrests forward. The centre head
restraint may need to be adjusted.
When raising the backrests, ensure that they
are properly secured and locked.
Ski hatch
A hatch in the rear backrest allows long objects
(skis, planks, etc.) to be transported. To open
this hatch, tip the right-hand backrest forward.
Release the hatch by pushing the catch upwards
at the same time as folding the hatch forward.
Then tip the backrest back into position with the
hatch open.
NOTE! If your Volvo is equipped with an
integrated booster cushion, you must fold this
out first.
8501931e
WARNING!
Always secure the load. During heavy
braking the load may otherwise shift,
causing personal injury. Cover sharp edges
with something soft. Turn off the engine
and apply the parking brake when loading
or unloading long objects! You may
accidentally knock the gear lever or gear
selector with the load and cause a gear to
engage and the car to move off.
8502002d
Always secure long loads!
8501909d
73
Locks and Alarm
Immobilizer, remote control 74
Locking and unlocking 75
Replacing the battery 76
When it is dark, deadlocks 77
Child safety lock, Service locking 78
Alarm 79
74
8302187
m
Doors and locks
Keys - Immobilizer
Your car is delivered with two master keys and
one service key*. One of the master keys is
foldable and equipped with an integrated remote
control.
Master key
This key operates all locks
Service key*
For driver's door, ignition switch and
steering wheel lock only.
*: certain markets only
Remote control functions
1. Unlocking
Press button (1) to unlock all doors, the boot lid
and the fuel filler flap.
2. Boot lid
Press button (2) twice to unlock the boot lid
only.
3. Alarm function
The alarm function can be used to attract
attention during emergency situations. If the red
button (3) is held for at least 3 seconds or is
1. Unlock 2. Open boot lid
3. Alarm function 4. Approach lighting
5. Lock 6. Fold/open key
1
2
3
4
5
6
8302189d
Loss of key
If you should lose one of your keys, bring the
remaining keys to an authorised Volvo work-
shop. As a crime prevention measure, the code
for the lost key is erased from the system and
the other keys must be re-coded in the
system.The mechanical code numbers for the
keys are recorded on a separate label accompa-
nying the keys. Store the label in a safe place.
Take the label to your Volvo dealer if you wish
to order new keys. A maximum of six remote
controls/keys can be programmed and used.
Immobilizer
Each key has an integrated coded chip. The code
must be the same as the code in the ignition
switch receiver. The car can only be started if
the correct key with the correct code is used.
Ignition keys and electronic immobilizer
The ignition key must not hang with other keys
or metal objects on the same key ring. The
immobilizer could be inadvertently triggered,
preventing the car from being started.
75
Locking and unlocking
Locking and unlocking the
car from the outside
Using the master key or its remote control, all
the doors and the boot lid can be locked or
unlocked from the outside at the same time.
When the vehicle is locked, the door locking
buttons and interior door handles are
disconnected.
Using the master key or its remote control, all
the doors and the boot lid can be unlocked from
the outside at the same time.
If the car is locked from the outside, the fuel
filler flap locks after a 10-minute delay.
8301290d
Locking and unlocking the
car from the inside
All doors and the boot lid can be locked and
unlocked at the same time using the switches in
the door panel (applies if the vehicle is opened
with the master key).
Additionally, each door can be locked with the
lock button and unlocked by opening the door
using the handle.
The above situation is valid, as long as you
haven’t locked the car from the outside!
8302186
pressed twice in succession during the same
amount of time, the direction indicators and horn
will be activated. The alarm is deactivated
automatically after 25 seconds or by pressing
any of the buttons on the remote control.
4. Approach lighting
Do the following when you approach the car:
Press the yellow button (4) on the remote
control.
The interior lighting, parking lamps, number-
plate lighting and the lamps in the door mirrors
(option) will switch on. If a trailer is attached to
the car, the trailer lights will also be switched
on. These lights will remain lit for 30, 60 or
90 seconds. An appropriate time setting for
your car can be performed at an authorised
Volvo workshop.
In order to switch off Approach lighting:
press the yellow button again.
5. Locking
Lock all doors, boot lid and fuel filler flap with
button 5. There is a delay of approx. 10 minutes
for the fuel filler flap.
6. Folding/opening key
The key can be folded by pressing button 6
while folding the key blade into the keypad.
The folding key will open automatically with
one press of the button.
76
Locking and unlocking, Replacing battery
Unlocking the boot lid with
the master key
Normally the boot lid is locked or unlocked
when you lock or unlock the car using the
master key in the drivers door or the remote
control. The boot lid can be opened by slowly
pressing the button on the remote control twice
within three seconds, or by pressing the boot
lid opener. The master key should only be used
to unlock the boot lid in emergency situations
(if the remote control is broken or if the car is
without power). In such cases: insert the master
key into the upper or lower part of the plug
covering the lock. Twist the key upwards or
downwards and remove the plug. Then unlock
the boot lid.
Automatic locking (option)
The doors lock automatically when vehicle
speed exceeds 7 km/h and remain locked until a
door is opened from the inside or are unlocking
using a central locking button.
Unlocking/locking the boot lid
with the remote control
Do as follows to unlock the boot lid only:
· Press the remote control button for the boot
lid two times. The boot lid is unlocked and
opens slightly.
If all doors are locked when you close the boot
lid, it locks automatically.
Replacing the battery
If the locks repeatedly fail to react to signals
from the remote control at a normal distance, the
battery should be replaced at the next service
interval or within the course of a couple of
weeks.
· Remove the cover by carefully prising up
the rear edge with a small screwdriver.
· Change the battery (type CR 2032, 3 volt),
the plus side should be up. Avoid touching
the battery and its contact surfaces with your
fingers.
· Refit the cover. Make sure the rubber seal is
properly fitted and free from damage to
prevent water form entering.
· Turn the old battery in to your Volvo
workshop so that it is disposed of in an
environmentally friendly way.
Automatic relocking
If none of the doors or the boot lid is opened
within two minutes of being unlocked with the
remote control from the outside, all locks
will be automatically relocked. This function
prevents you from inadvertently leaving the car
unlocked.
For cars with an alarm, see page 79.
NOTE! If the boot lid was opened with the
button on the remote control, it will not
automatically relock.
8302194
m
8302195
77
When it is dark, deadlocks
Deadlocks*
Your car has a special deadlock position which
means that the doors cannot be opened from the
inside if they are locked. Deadlocks can only be
activated from the outside by the drivers door
being locked with the key or remote control. All
doors must be closed before deadlocks can be
activated.
Deadlocks are engaged after a 25 second delay
once the doors have been closed. The doors
then cannot be opened from the inside. The car
can only be unlocked from the outside via the
drivers door or by using the remote control
(this only applies to cars that are equipped with
deadlocks). The car cannot be opened by
manipulating the door buttons from the outside.
WARNING!
Do not allow anyone to remain in the car
without deactivating the deadlock
Deactivating deadlocks
If someone wishes to remain in the car but you
still wish to lock the doors from the outside the
deadlocks can be disconnected. From the time
the key is turned from position II until you lock
the car, or as long as the centre console is
supplied with current, you can press the button.
The LED in the button then comes on and stays
on until you lock the car using the key or
remote control. A message is displayed as long
as the key remains in the ignition switch. The
deadlock is now disconnected. The deadlocks
will be re-activated the next time the ignition is
switched on.
3602415d
When it is dark
Approach lighting
Carry out the following when you approach
the car:
· Press the yellow button on the remote
control.
The interior lighting, parking lamps, number-
plate lighting and lamps in the door mirrors
now light (certain models).
* Certain countries
78
Child safety lock, Service locking
B
A
8301235d
B
A
8301289d
Control for child safety lock - left rear door
Control for child safety lock - right rear door
WARNING!
Remember that in the event of an accident,
rear seat passengers cannot open rear
doors from the inside if the child safety
locks are activated. Therefore, keep the
doors unlocked while driving! In the
event of an accident, rescue personnel will
then be able to quickly get into the car
from the outside.
Mechanical child safety lock -
rear doors
The controls for the child safety locks are in the
rear edges of the rear doors and are only
accessible when the door is open. Use the
ignition key to turn the control and thus activate
or deactivate the child safety lock.
A Door cannot be opened from the inside
(twist outward).
B The doors can be opened from the inside
(twist inwards).
Service locking*, boot lid
This function is beneficial if the car is left for
service, with a hotel parking valet or the like.
The service key is left with the staff, who can
open and drive the car but do not have access to
the boot lid (or the glovebox if it is locked with
the master key).
To activate service locking:
· Turn the master key to position II.
· Press the button. An LED in the button
lights when the function is activated and a
message is shown on the display.
To deactivate service locking:
· Turn the master key to position II and
press the button again.
* Certain countries
79
Alarm
The alarm system (option)
When the alarm is connected, it continually monitors all alarm points. The
alarm is triggered if:
· the bonnet is opened.
· the boot lid is opened.
· a side door is opened.
· the ignition switch is turned with a non-approved key or subjected to
force.
· a movement is detected in the passenger compartment (if a movement
detector is installed - extra equipment).
· the car is lifted or towed away (if it is equipped with a tilt detector -
extra equipment).
· the battery cable is disconnected.
· anyone tries to disconnect the siren.
Activating the alarm
Press the LOCK button on the remote control. A long flash signal from
the cars direction indicators confirms that the alarm is active and that all
doors are closed. In certain markets the key or the switch in the drivers
door can be used to alarm the car.
Automatic arming of the alarm
In certain countries (Belgium, Israel etc.) the alarm is automatically armed
after a slight delay if the drivers door is opened and closed but the car is
not locked.
Deactivating the alarm
Press the UNLOCK button on the remote control. Two short flash
signals from the direction indicators of the car confirm that the alarm is
deactivated. In certain markets, the key can be used to deactivate the
alarm.
Deactivating a triggered alarm
Press the UNLOCK button on the remote control if the alarm sounds and
you wish to deactivate it. Two short flashes of the direction indicators are
given as confirmation.
Alarm signals
The audio signal is given from a siren with a reserve battery. Each alarm
signal lasts 25 seconds.
If the alarm is triggered, all direction indicators flash for 5 minutes or until
you deactivate the alarm as described above.
Automatic alarm reset
If neither the side doors or rear door are opened within two minutes of
the alarm being disarmed, and the car is unlocked with the remote
control, the car automatically rearms the alarm. The car is simultaneously
locked. This function prevents you from accidentally leaving the car
unalarmed.
80
Alarm
Status indicator lamp on the dashboard
An indicator lamp (LED) at the top of the dashboard gives a description of
the alarm system status:
· Lamp not lit: Alarm is deactivated.
· Lamp flashes once every 2 seconds: alarm is armed.
· Lamp flashes quickly, after deactivating the alarm and until the ignition
is switched on: The alarm has been triggered.
· If a fault has occurred in the alarm system, a message is shown in
the display with instructions for appropriate measures.
IMPORTANT!
Do not attempt to repair or modify alarm system components. All such
attempts can affect terms of insurance.
3602415d
Temporary deactivation of detectors
To avoid triggering the alarm inadvertently, for example when leaving
a dog in the car or during a ferry crossing, the movement and tilt detectors
can be temporarily deactivated. The button can be pressed at any time
between the key being turned from position II to the car being locked, or
as long as the power to the centre console is on. The LED in the button
lights until you lock the car with your key or remote control.
A message is displayed as long as the key remains in the ignition lock.
The detectors will be reactivated the next time you switch on the ignition.
If your car is equipped with deadlocks, these will be simultaneously
activated. See page 77.
81
Testing the alarm system
Testing the movement detector for the passenger compartment:
1. Open all windows.
2. Activate the alarm. Alarm activation is confirmed by the LED flashing
slowly.
3. Wait 30 seconds.
4. Test the movement detector in the passenger compartment by lifting a
bag or similar from the seat. The alarm should now sound and flash.
5. Deactivate the alarm by unlocking with the remote control.
Testing the doors:
1. Activate the alarm.
2. Wait 30 seconds.
3. Unlock with the key on the drivers side.
4. Open one of the doors. The alarm should now be triggered.
5. Repeat the test for the other door.
6. Deactivate the alarm by unlocking with the remote control.
Testing the bonnet:
1. Get into the car and deactivate the movement detector as described on
page 80.
2. Deactivate the alarm (remain in the car and lock the doors with the
button on the remote control).
3. Wait 30 seconds.
4. Open the bonnet with the handle under the dashboard. The alarm
should now sound and flash.
5. Deactivate the alarm by unlocking with the remote control.
Testing the boot lid:
1. Activate the alarm.
2. Wait 30 seconds.
3. Unlock with the key on the drivers side.
4. Open the boot lid. The alarm should now sound and flash.
5. Deactivate the alarm by unlocking with the remote control.
If the alarm system does not work correctly, have the car examined by an
authorised Volvo workshop.
Alarm
82
83
Starting and driving
Starting the engine 84
Economical driving 85
Manual gearbox 87
Automatic gearbox 88
All-Wheel Drive (AWD) 90
Active chassis FOUR-C 91
Parking assistance 92
Towing 94
Jumpstarting 95
Driving with trailer 96
Detachable towbar 98
Adjusting headlamp pattern 103
BLIS (Blind Spot Information System) 106
84
Starting the engine
Refuelling
The fuel cap is inside the fuel filler flap on the
right rear wing.
In high exterior temperatures there can be
overpressure in the fuel tank. Open the filler cap
slowly. Do not overfill the fuel tank. A maxi-
mum of one automatic cut out by the fuel
pump nozzle is recommended! Too much fuel
at high outside temperatures can cause the tank
to overflow!
After refuelling, replace the fuel cap and turn
until one or more clicks is heard.
Opening fuel tank
The fuel filler flap is unlocked and can be
opened when the car is unlocked.
2302129d
NOTE! When the car is locked from outside,
the fuel filler flap remains unlocked for a
further 10 minutes.
Start the engine as follows
(Petrol)
1 Apply the parking brake (handbrake).
2 Automatic gearbox: Gear selector in P or
N position.
Manual gearbox: Gear lever in neutral
and the clutch pedal completely depressed.
This is especially important in severe cold.
3 Turn the ignition key to the start position. If
the engine does not start within 5-10 seconds,
release the key and try again.
Refuelling
NOTE! Never add cleaning additives yourself
unless specifically recommended to do so by a
Volvo workshop.
Important!
Petrol-powered cars must always be refuelled
with unleaded petrol so as not to damage the
catalytic converter.
WARNING!
Always switch off your mobile telephone
during refuelling - the ring signal can cause
sparks which may ignite petrol fumes and
lead to fires or personal injury.
Start the engine as follows
(Diesel)
1 Apply the parking brake (handbrake).
2 Automatic gearbox: Gear selector in P or
N position.
Manual gearbox: Gear lever in neutral
and the clutch pedal completely depressed.
This is especially important in severe cold.
3 Turn the ignition key to the driving position.
A control symbol in the combined
instrument panel shows that the engine is
pre-heating. Turn the key to the start
position when the indicator symbol has
gone out.
Refuelling with diesel oil
At low temperatures (–5 °C to –40 °C) the
diesel oil can precipitate paraffin, which makes
the engine difficult to start. Make sure that
special winter fuel is used during the cold
period of the year.
NOTE! Depending on the engine temperature
when starting, the idling speed with a cold start is
- for a short period - higher than normal for some
engine types.
The reason for this is Volvo's ambition to
minimise exhaust emissions by bringing up the
engine's exhaust purification system to its correct
working temperature as quick as possible.
85
Economical driving
Drive with anticipation
Economical driving results from driving gently
with anticipation and adapting your driving
style and speed to the situation.
Keep in mind the following:
· Drive the engine to operating temperature as
soon as possible! That is to say: do not let
the engine idle, but drive with a light load as
soon as you can.
· A cold engine consumes more fuel than a
warm one.
· Avoid driving short distances where the
engine never has time to reach operating
temperature.
· Drive gently! Avoid unnecessary quick
accelerations and heavy braking.
· Do not drive with unnecessary, heavy loads
in the car.
· Do not drive with winter tyres when the
roads are clear and dry.
· Remove the load carrier when it is not in use.
· Do not open side windows unnecessarily.
Your new car - slippery road
surfaces
Driving on a slipper road surface may feel
different depending on whether you have
chosen a car with manual gearbox or automatic
gearbox.
Practice handling skids under controlled
conditions so that you know how your new car
reacts.
Do not overload the battery
The electrical functions in the car load the
battery to varying degrees.
Avoid having the ignition key in position II
when the engine is off.
Use position I instead, as less power is
consumed. The 12-volt socket in the cargo
compartment supplies power even when the
ignition key is removed.
Examples of functions which consume a lot of
power:
· ventilation fan
· windscreen wipers
· audio system
· parking lamps.
Also take note of different accessories that load
the electrical system.
Do not use functions the consume a lot of
current when the engine is switched off.
A text is shown on the display in the combined
instrument panel if battery voltage is low.
The message in the display remains until the
engine has started.
The energy economy function shuts down
certain functions or reduces the load on the
battery, e.g. by lowering ventilation fan speed
and switching off the audio system.
Charge the battery by starting the engine.
86
Economical driving
Do not allow the engine and
cooling system to overheat
Under certain conditions, e.g. when driving in
hilly terrain and with a heavy load, especially in
warm weather, there is a risk of the engine and
cooling system overheating.
To prevent the cooling system from
overheating:
· Drive at low speeds if driving with a trailer
up a long incline.
· Switch off the air conditioning temporarily.
· Avoid letting the engine idle.
· Do not turn the engine off immediately you
stop, if the car has been driven hard.
· Remove any auxiliary lamps from in front
of the grille if driving in extremely high
temperatures.
To prevent the engine from overheating:
Do not exceed engine speeds of 4500 rpm if
driving with a trailer or caravan in hilly terrain.
The oil temperature can become too high.
Automatic gearbox
Adaptive system
The gearbox is controlled by what is known as
an adaptive system. The system continually
monitors how the gearbox is behaving
senses every gear change for optimum shift
quality.
Lock-up function
The gears have a lock-up function (locked
gears), which gives better engine braking and
lower fuel consumption.
Safety systems
Cars with automatic gearbox have special safety
systems:
Keylock
To remove the ignition key, the gear selector
must be in the P position.
The key is locked in all other positions.
Park position (P)
Stationary car with engine running:
Hold your foot on the brake pedal when
moving the gear selector to another position.
Shiftlock
Park position (P)
The brake pedal must be depressed to move the
gear selector from position P to other gear
positions when the ignition key is in position I
or II.
Neutral position (N position)
The brake pedal must be depressed to move the
gear selector from position N to other gear
positions when the ignition key is in position I
or II.
Cold start
When starting in cold temperatures, gear shifts
may feel harder.
This is due to the viscosity of the transmission
fluid at low temperatures.
To minimise engine emissions, the gearbox
shifts up later than normal if the engine has
been started at low temperatures.
When the engine is cold, the gearbox shifts
gears at higher revs.
This allows the catalytic converter to reach
normal operating temperature more quickly.
Kick-down
When the accelerator is pressed all the way to
the floor, beyond the position normally
regarded as full acceleration, a lower gear is
immediately engaged. This is known as kick-
down.
When maximum speed for this gear is reached,
or if the accelerator is released from the kick-
down position, the gearbox automatically
changes up.
Kick-down is used when maximum accelera-
tion is needed, such as for overtaking.
To prevent over-revving, the gearbox control
program has a protective downshift inhibitor.
The kick-down function cannot be used in
the manual* positions. Return to automatic
position D.
* Refers to Geartronic.
87
Manual gearbox
Gear positions, 5-speed
Depress the clutch pedal fully with each gear
change. Remove your foot from the clutch
pedal between gear changes! Follow the
appropriate shifting pattern.
For the best possible fuel economy, use the
highest gear possible as often as possible.
64
68
72
76
80 64
68
72
76
80
4302395n
M56
Reverse gear inhibitor
Only engage reverse gear when the car is
stationary.
To put the car in reverse, the gear lever must
first be moved to neutral (between 3rd and 4th
gear). Thus, reverse cannot be directly selected
from 5th gear due to the reverse gear inhibitor.
64
68
72
76
80 64
68
72
76
80
4301589e
M56
88
Automatic gearbox
Gear selector positions
parking brake when the car is stationary with
the gear lever in N.
D  Driving position
D is the normal driving position. The car
automatically shifts between the different
gearbox gears based on the level of acceleration
and speed. The car should be stationary when
selecting D from position R.
4 Low gear
Shifting up and down between the 1st, 2nd, 3rd,
and 4th occurs automatically.
The 5th gear will not be engaged.
Position 4 can be used:
· for mountain driving
· when driving with a trailer
· to increase engine braking
3 Low gear
Shifting up and down between 1st, 2nd and
3rd occurs automatically.
The 4th gear will not be engaged.
Position 3 can be used:
· for mountain driving
· when driving with a trailer
· to increase engine braking
L  Low gear position
Select L if you wish to drive in 1st or 2nd.
Position L gives the best engine braking for
mountain driving, etc.
P Parking
Select this position when you wish to start the
engine or park the car.
The car should be stationary when you
select P!
In the P position the gearbox is mechanically
locked. Always apply the parking brake when
parking!
R Reversing position
The car should be stationary when you
select R!
N  Neutral position
N is the neutral position. The engine can be
started, but no gear is selected. Apply the
W Winter
The W button by the gear
selector engages and
disengages the winter
programme W. The
symbol W is shown in the
combined instrument panel
when the winter program-
me is activated. The Winter programme starts
the gearbox in 3rd gear to make it easier to pull
off on slippery roads. When the programme is
engaged, lower gears are activated only by kick-
down. The W programme can only be selected
in position D.
89
Automatic gearbox
Mechanical gear selector
inhibitor
The gear selector can be moved freely between
N and D. Other positions are locked with a latch
that is released with the inhibitor button on the
gear selector.
Press the inhibitor button to move the lever
forward or back between the different gear
positions.
4302106d
4301647d
Manual positions, Geartronic
Move the gear selector to the right to shift from
automatic driving position D to manual mode.
To shift from the MAN position to automatic
driving position D, move the gear selector left
to position D.3rd gear is the highest gear that
can be used when starting.
While driving
The manual gearshift mode can be selected at
any time while driving. The engaged gear is
locked until you choose another gear. The car
will only shift down automatically if you slow
down to a very low speed.
If the gear selector is moved to - (minus) the car
changes down a gear and engine brakes at the
same time. If the gear selector is moved to +
(plus) the car changes up a gear.
The kick-down function cannot be used in
manual mode.
Gear selector, automatic gearbox Geartronic Gear selector, Geartronic
64
68
72
76
80 64
68
72
76
80
4302476e
90
All Wheel Drive
All-Wheel Drive (AWD) (option)
All-wheel drive is always engaged.
All-wheel drive means that the vehicle is driven
by all four wheels at the same time.
The power is distributed automatically between
the front and rear wheels.
An electronically-controlled clutch system
distributes the power to the pair of wheels
which have the best grip in the road conditions.
This is to get the best possible grip and to avoid
wheelspin.
Under normal driving conditions, the majority
of power is transmitted to the front wheels.
The greater traction improves driving safety in
rain, snow and icy conditions.
Speed-dependent power
steering (option)
If the car is equipped with speed-dependent
power steering it is more easily steered at low
speeds to facilitate parking or the like.
When speed is increased, steering force is
adapted to provide the driver increased road
sensitivity.
Do not drive with an open boot
lid!
If you drive with the boot lid open, some of the
exhaust gases and poisonous carbon monoxide
can be sucked into the car through the cargo
compartment. If you must drive a short distance
with the boot lid open, do as follows:
· Close all windows.
· Distribute the air between the windscreen
and floor and while running the fan at high
speed.
91
Active chassis FOUR-C
Active chassis FOUR-C*
(option)
The car is equipped with an extremely advanced
active chassis system - Continuously Control-
led Chassis Concept - that is regulated electro-
nically.
The FOUR-C control unit analyses data from
the sensors and performs the necessary shock
absorber setting adjustments up to 500 times
per second. This results in extremely fast and
accurate individual shock absorber control,
which contributes to variations in chassis
characteristics.
Chassis characteristics can be modified at any
time while driving, when the nature of the road
changes or when you desire a change in driving
style. This change occurs in a matter of
milliseconds.The effect produced by pressing
the accelerator is linked to your choice of
chassis characteristics.
Comfort
Comfort mode adjusts the chassis setting so
that the body is insulated from uneven sections
of the road surface, which allows for better
glide. Shock absorption is softer and body
movements are minimal. This setting is
recommended for long-distance driving or
driving on slippery road surfaces.
If the chassis is in Comfort mode when the
ignition is switched off, it will resume this
mode the next time it is started.
3603554m
Sport
In Sport mode, steering responses are quicker
than in Comfort mode. Damping is harder and
the body follows the road surface to minimise
rolling during quick cornering. The car feels
sportier. If the chassis is in Sport mode when
the ignition is switched off, it will resume this
mode the next time it is started.
92
Parking assistance
3603495m
3602947r
Parking assistance, front and rear
General
Parking assistance is used as an aid to parking.
A signal indicates the distance to an object.
The frequency of the signal increases a you
come closer to an object in front of or behind
the car. The tone becomes constant at a distance
of about 30 cm. If there are objects within this
distance both behind and in front of
*
the car, the
signal alternates between front and rear
speakers.
If the volume of another sound source from the
audio system is high, this is automatically
lowered.
The system is always activated when the car is
started.
*Provided that parking assistance is mounted
both front and rear.
WARNING!
Parking assistance does not relinquish the
drivers own responsibility during parking.
The sensors have blind spots where objects
cannot be detected.
Be aware of children and animals near the car.
Front parking assistance
The measurement area straight in front of the
car is approx. 0.8 m.
The text message PARK ASSIST ACTIVE
appears in the audio display when the sensors
react to an obstacle in front of the car.
Auxiliary lamps cannot be installed together
with parking assistance because the sensors
will react to the auxiliary lamps.
Rear parking assistance
The measurement area straight behind the car is
approx. 1.5 m.
The text message PARK ASSIST ACTIVE
appears in the audio display when reverse gear
is engaged.
The system must be deactivated when driving
with a trailer, bike carrier on the towbar or the
like as this would trigger the sensors.
Rear parking assistance is deactivated automati-
cally when towing a trailer if a Volvo genuine
trailer cable is used.
Deactivating and reactivating parking
assistance
Parking assistance can be deactivated with the
button in the switch panel. The LED in the
switch goes out.
Parking assistance is reactivated when the
switch is turned on and the LED illuminates.
Front parking assistance
Front parking assistance is active at speeds of
below 15 km/h, even when reversing.
The signal comes from the front speakers.
93
3603503m
Parking assistance
Parking assistance sensors
Cleaning the sensors
The sensors must be cleaned regularly in order
for them to function properly. Clean them with
water and car shampoo.
The sensors may react if covered by ice and
snow.
Rear parking assistance
Rear parking assistance is activated when
reverse gear is engaged.
The signal comes from the rear speakers.
Fault indicator
The information symbol
shines with a steady glow
PARK ASSIST SERVICE
REQUIRED is shown in the
information display in the
centre of the combined
instrument panel together with
the symbol.
94
Towing
Towing eye, front Towing eye, rear
If you need to be towed
· Unlock the steering wheel lock so that the
car can be steered.
· Keep in mind the highest permitted legal
towing speed.
· Remember that the brake and power
steering servos do not function when the
engine is switched off! You must exert
approximately five times more pressure on
the brake pedal and steering is considerably
harder than usual.
· Drive gently. Keep the towline taut to avoid
unnecessary jerking.
Bump starting (tow starting)
the engine
If you bump start (tow start) a car with manual
gearbox, the catalytic converter may be
damaged. Cars with automatic gearbox cannot
be bump started (tow started). Use a booster
battery if the battery is flat.
Towing eye
The towing eye is located in the tool kit in the
cargo compartment. You must screw the towing
eye into place before towing. The sockets and
covers for the towing eye are located on the
right-hand side of each bumper.
Remove the cover as follows:
A. Loosen the bottom edge of the cover with a
coin.
B. Screw the towing eye securely into place up
to the flange (C). You can use a wheelbrace.
After use, unscrew the towing eye and refit the
cover.
Towing
NOTE! The towing eye may only be used for
towing on the road, not for salvage after driving
into a ditch or similar. Professional help should
be called for salvage towing.
8600307e
A
B
For automatic gearboxes
· The gear selector should be in position N.
· Maximum permitted speed for cars with an
automatic gearbox: 80 km/h (50 mph).
Maximum permitted distance: 80 km
(50 miles).
· Cars equipped with an automatic gearbox
must only be towed face forward.
· The engine cannot be towed to start (bump
started). See “Jumpstarting” on the next page.
95
Jumpstarting
Jumpstarting with a booster battery is as
follows:
If for some reason the battery in your car is discharged, you can “borrow”
current from a spare battery or another cars battery to start the engine.
Always check that the clamps are secure so that there are no sparks
during the start attempt.
To avoid the risk of explosion, we recommend you do exactly as follows.
· Turn the ignition key to position 0.
· Ensure that the booster battery has 12 volt current.
· If the booster battery is in another car, stop the engine of that car and
make sure the cars are not touching.
· Connect the red cable to the booster battery’s positive terminal
(1+ in the illustration) and the connection in your cars engine
compartment (2+ in the illustration).
The clamp should be attached to the contact point located under a little
black cover with a plus sign on it. The cover is connected to the cover
of the fuse box.
3100088m
WARNING!
Remember that batteries, especially the booster battery, contain
oxyhydrogen which is highly explosive. A spark, which can be caused
if you incorrectly install the jump leads, is enough to cause the battery
to explode and both damage the car and injure you. The battery also
contains sulphuric acid, which can cause serious corrosive damage. If
the acid comes into contact with your eyes, skin or clothes, flush with
large quantities of water. If acid splashes into your eyes contact a
doctor immediately.
· Connect one end of the black cable to the booster battery’s negative
terminal (3– in the illustration).
· Connect the other end of the black cable to a grounding point on your
car (4– in the illustration).
· Start the engine of the “booster car”. Let the engine run a few minutes
at a speed slightly higher than idle, 1500 rpm.
· Start the engine of the car with the discharged battery.
· NOTE! Do not move the clamps during the start attempt (risk
of spark buildup).
· Remove the clamps in reverse order.
NOTE! If you need to help another car, connect the red cable as shown in
the illustration above. Connect the black cable between two grounding
points as also shown in the illustration. Do not connect the black cable
to the negative pole of another battery!
96
* Does not apply to ball hitch with vibration damper.
Driving with trailer
· The towing bracket on the car must be of an approved type. Your
Volvo dealer can advise you as to which towing bracket to use.
· Distribute the load in the trailer so that the weight on the towing
bracket is approximately 50 kg for trailer weights under 1200 kg and
approximately 75 kg for trailer weights over 1200 kg.
· Increase tyre pressure to correspond to the pressure for full load. See
the tyre pressure table!
· Clean the towing bracket regularly and grease the towball* and all
moving parts to prevent unnecessary wear.
· Do not drive with a heavy trailer when your car is brand new! Wait
until it has gone at least 1000 km (620 miles).
· The brakes are loaded much more than usual on long and steep
downhill slopes. Downshift to a lower gear and adjust your speed.
· If the car is driven with a heavy load in a hot climate, the engine and
gearbox may overheat. The temperature gauge in the combined
instrument panel goes into the red zone when the car overheats. Stop
and let the engine idle a few minutes.
· If the car overheats, the air conditioning system can be temporarily
switched off.
· The gearbox reacts with a built-in protection function if the car
overheats. See the message in the display!
· The engine is loaded more heavily than usual when driving with a
trailer.
· For reasons of safety, you should not drive faster than 80 km/h
(50 mph), even if the laws of certain countries permit higher speeds.
· The highest permissible trailer weight for a trailer without brakes is
750 kg.
· If you park with a trailer, always move the gear selector to the P
position (automatic transmission), or engage a gear (manual gearbox).
If you park on steep hills always put chocks under the wheels.
Driving with trailer
· Avoid driving with trailer weights above 1200 kg on inclines great
than 12%. You should not drive with a trailer on inclines above 15%
Driving with trailer - automatic transmission
· When parking on a slope you should apply the parking brake before
moving the gear selector to the P position. When starting on a slope
you should first move the gear selector to the driving position and then
release the parking brake.
· Select an appropriate low gear position on the gearbox when driving
on steep slopes or if driving slowly. In doing so, you prevent the
gearbox from changing up if you have an automatic transmission. The
gearbox oil will be cooler.
· If you have a Geartronic transmission, do not use a higher manual gear
than what the engine can "handle". It is not always economical to drive
in high gears.
NOTE! Some models must be fitted with an oil cooler for the automatic
transmission when driving with a trailer. You should therefore check with
your closest Volvo dealer about just your car if a towbar has been fitted at
a later date.
97
0300171d
Driving with trailer
Level control
If your car is equipped with automatic level control, the rear end will
always have the right height while driving irrespective of the load. The
rear end drops when the car is at a standstill, which is quite normal. When
starting with a load, the level is pumped up after a certain distance.
The highest permitted trailer weight Recommended
for a trailer with brakes ball pressure
0-1200 kg.................................................... 50 kg
1201-1600 kg.............................................. 75 kg
1601-1800 kg.............................................. 75 kg
NOTE! The maximum permitted trailer weights stated are the ones
that the Volvo Car Corporation allows. Remember that national
vehicle regulations may further limit the trailer weight and speed.
The towbars can be certified for higher towing weights than what
the car may tow.
WARNING!
If you do not follow the given recommendations, the trailer and car
may be difficult to control during evasive manoeuvres and braking,
which can be dangerous to you and others on the road.
98
WARNING!
If your car is fitted with Volvo's detachable
towbar: Make sure that the towbar is locked
before you drive off.
· The red signal pin (see the arrow in the
illustration to the left) should not be visible!
· Use the key to lock it.
See the description on page 100.
Fixed towbar(A)
Always remember to fasten the trailer's safety
cable to the attachment. See the illustration.
Detachable towbar (B)
Always follow installation instructions
carefully.
Always remember to fasten the trailer's safety
cable to the attachment. See the illustration.
Always remember to clean and grease the
connector pin regularly. Use the recommen-
ded grease 8624203.
NOTE! Your car may have a towing bracket
with a 13-pin electrical connector, which you
need to connect to a trailer with a 7-pin
electrical connector. If this is the case, use only
an original Volvo Genuine adapter cable.
Ensure that the cable does not drag on the
ground.
3701780d
B
A
8901313d
Towing bracket
99
8902082d
Towing bracket
Distance A above:
Fixed: 1152 mm
Detachable: 1152 mm
Max. ball pressure: 75 kg
8902083d
A
Distance B above:
Fixed: 65 mm
Detachable: 65 mm
B
100
Remove the connector pin cover.
Detachable towbar - mounting the ball section
Hold the towball and turn the lever clockwise
to the locked position. Release the lever.
Grasp the towbar.
Push the part with the ball in until it locks.
NOTE! The lever changes position quickly.
Check that the signal pin (B) is pushed in.
Turn the key anticlockwise to the locked
position and remove it from the lock.
1
8902079M
OPEN
2
8902078M
LOCKED
6
8902076M
RED PIN (B)
NOT VISIBLE!
5
8902076M
PUSH
TO
LOCK
4
8902075M
B
OPEN
3
8902074M
Insert the key and turn it clockwise to the
unlocked position.
101
Detachable towbar - removing the ball section
Insert the key into the detachable part and turn
it clockwise to the unlocked position.
Turn the lever clockwise to the locked position
and grip the towball.
Grasp the towbar. Pull the towball section from
the connector pin. Do not hold the lever.
IMPORTANT!
The lock on the towball can only be locked
when the red plastic pin is not visible
OPEN
1
8902078M
OPEN
2
8902074M
3
8902081M
Turn the key anticlockwise to the locked
position and remove it from the lock.
Refit the connector pin cover as in
the illustration.
LOCKED
4
8902077M
5
8902080M
102
Some important tips!
Load carrier attachment points
Loading
General
Load capacity is affected by extra accessories
mounted on the car, such as a towbar, the load
on the towball (75 kg with trailer hitched), load
carriers and roof box, as well as the passengers’
combined weight. The load capacity of the car
is reduced by the number of passengers and
their weight.
WARNING!
The cars driving characteristics change
depending on how heavily it is loaded and
how the load is distributed.
Fitting the load carrier
1. Make sure the load carrier is placed in the
right direction (see the marking on the decal
under the cover).
2. Fit the guide pins into the guide holes (1).
3. Carefully lower the bracket on the other side
to the roof.
4. Screw the knob up a bit.
Press the knob against the roof bracket and
catch the hook in the roof bracket under
the roof rail.
5. Screw the load carrier in place.
6. Fit the guide pins of the other brackets into
the guide holes.
7. Screw the load carrier in place.
8. Check that the hook is properly secured in
the roof bracket.
9. Tighten the knobs alternately until the
carrier feels secure.
10. Refit the cover.
11. Check the knobs regularly to see that
they are properly tightened.
If using load carriers
· To avoid damaging your car and to achieve
the best level of safety when driving, we
recommend that you only use load carriers
that Volvo has specially designed for your car.
· Check periodically that the load carriers
and load are properly secured. Lash the
load securely with retaining straps!
· Distribute the load evenly over the load
carriers. Do not load lopsidedly! Place the
heaviest items at the bottom.
· Keep in mind that the cars wind resistance
and fuel consumption increase in proportion
to the size of the load.
· Drive gently. Avoid quick accelerations,
heavy braking and taking curves hard.
WARNING!
Load no more than 100 kg on the roof,
inclusive of the load carriers or roof box.
The cars centre of gravity and driving
characteristics are altered by roof loads.
Floor mats
Volvo offers custom made floor mats for your
car. They must be properly placed and secured
in the mat clips so that they do not become
entangled in the pedals at the drivers seat or get
caught at other seats.
1
1
8902060
m
103
3501716j
A. Headlamp pattern for left-hand traffic
B. Right-hand traffic
Correct light pattern for left or
right-hand traffic
So as not to dazzle oncoming drivers, the
headlamp beam pattern can be altered by
masking the headlamps. The quality of the
beam pattern may not be as good.
Headlamp masking
Copy the templates, which are reversed for
RHD variants, and transfer the pattern to a self-
adhesive, waterproof material such as opaque
tape or similar. The mask is positioned using
the rectangle in the headlamp lens. The
reference measurements (X, Y) are for obtain-
ing the distance from the rectangle to the corner
of the mask. After copying the templates, check
the measurements so that the reference measu-
rements cover enough of the beam pattern.
3501842m
X
X
Y
X
X
X
X
Y
Y
X
X
3501841m
Fitting the mask to the headlamps. The upper illustration is for halogen headlamps and the lower
illustration is for Bi-Xenon headlamps.
Reference measurements for halogen
headlamps:
Template 1. (1) = 21 mm, (2) = 46 mm
Reference measurements to the rectangle in the
headlamp lens: (3) = 158 mm, (4) = 39 mm.
Template 2. (5) = 70 mm, (6) = 27 mm
Reference measurements to the rectangle in the
headlamp lens: (7) = 22 mm, (8) = 39 mm.
Reference measurements for Bi-Xenon
headlamps:
Template 3. (1) = 93 mm, (2) = 37 mm
Reference measurements to the rectangle in the
headlamp lens: (3) = 84 mm, (4) = 47 mm.
Template 4. (5) = 101 mm, (6) = 37 mm
Reference measurements to the rectangle in the
headlamp lens: (7) = 2 mm, (8) = 2 mm.
Adjusting headlamp pattern
104
Adjusting headlamp pattern
Masking templates for halogen headlamps
3501843
m
The templates are for LHD variants, and are reversed for RHD variants.
Template 1 is fitted to the left-hand headlamp for LHD variants and on the right-hand
headlamp for RHD variants.
Template 2 is fitted to the right-hand headlamp for LHD variants and on the left-hand
headlamp for RHD variants.
Copy templates 1 and 2. Check the measurements to ensure they are correct. Reverse the
templates for RHD variants. Transfer the template to a self-adhesive, waterproof material
and cut it out.
105
Adjusting headlamp pattern
Masking templates for Bi-Xenon headlamps
3501844m
The templates are for LHD variants, and are reversed for RHD variants.
Template 3 is fitted to the left-hand headlamp for LHD variants and on the right-hand headlamp for RHD variants.
Template 4 is fitted to the right-hand headlamp for LHD variants and on the left-hand headlamp for RHD variants.
Copy templates 3 and 4. Check the measurements to ensure they are correct. Reverse the templates for RHD variants. Transfer the template to a self-
adhesive, waterproof material and cut it out.
106
3603683r
1 - BLIS camera, 2 - Indicator lamp,
3 - BLIS symbol
BLIS
BLIS is an information system which indicates
whether there is another vehicle moving in the
same direction in the "blind spot".
The system is based on digital camera technolo-
gy. The cameras (1) are fitted under the door
mirrors.
When a camera has detected a vehicle inside the
blind spot zone (up to approx. three metres
from the side of the car and up to approx. 9.5
metres behind the rearview mirror, see illustra-
tion in the right-hand column) then an indicator
lamp is lit in the door panel (2). The light comes
on with a constant glow to draw the driver's
attention to a vehicle in the blind spot.
WARNING!
- BLIS is an information system, NOT a
warning or safety system.
- The system is a complement to, and not a
replacement for, the existing rearview
mirrors. It can never replace the awareness
and responsibility of the driver.
- The responsibility for changing lanes safely
rests with the driver.
NOTE! The lamp comes on on the side of the
car where the system has detected the vehicle.
If the car is overtaken on both sides at the same
time then both lamps come on..
When BLIS operates
The system operates when the car is driven at a
speed between 10 km/h and 250 km/h.
When you overtake another vehicle:
The system reacts if you overtake another
vehicle at a speed of up to 20 km/h faster
than the other vehicle.
The system does not react if you drive at a
speed of more than 20 km/h faster than the
other vehicle.
3603686j
""Blind spots" covered by BLIS
Distance A = approx. 9.5 m Distance B = approx. 3 m
When you are overtaken by another vehicle:
The system reacts if you are overtaken by a
vehicle travelling up to 70 km/h faster than
you are travelling.
The system does not react if you are
overtaken by a vehicle travelling more than
70 km/h faster than you are travelling.
BLIS - Blind Spot Information System
107
WARNING!
- The BLIS system does not work in sharp
bends.
- The system does not work if the camera
lenses are covered. In this case the BLIS
indicator lamps flash and a text message is
shown in the display (see table on page 108).
- BLIS does not work when the car is re-
versing.
System function in daylight
and darkness
Daylight: In daylight the system reacts to
the shape of the surrounding vehicles. The
system is designed to detect motor vehicles
such as cars, trucks, motorcycles etc.
WARNING!
- The system does not react to bicycles or
mopeds.
- BLIS does not react to stationary vehicles.
Darkness: In darkness the system reacts to
the headlamps of surrounding vehicles. A
vehicle in the blind spot must at least have its
daytime running lights on to be detected by
the system. This means for example that the
system does not react to a trailer without
headlamps/daytime running lights which is
towed behind a car or truck.
3603682r
Switching off and
reactivating BLIS
BLIS is always active when the ignition is
switched on.
The system can be switched off by
pressing the BLIS button in the switch
panel in the centre console (see illustration
above). The LED in the button goes out
when the system is switched off and a text
message is shown in the display in the
dashboard.
BLIS can be reactivated by pressing the
button. An LED in the button then lights
and a new text message is shown in the
display. Press the READ button (see page
35) to clear the text message.
BLIS - Blind Spot Information System
108
BLIS - Blind Spot Information System
System status Text in the display
BLIS system not functioning BLIND-SPOT SYST SERVICE REQUIRED
Right-hand camera blocked BLIND-SPOT SYST R CAMERA BLOCKED
Left-hand camera blocked BLIND-SPOT SYST L CAMERA BLOCKED
Both cameras blocked BLIND-SPOT SYST CAMERAS BLOCKED
BLIS system off BLIND-SPOT INFO SYSTEM OFF
BLIS system on BLIND-SPOT INFO SYSTEM ON
WARNING!
The BLIS cameras have the same limitations as the human eye, i.e. it
"sees" worse in heavy snowfall or thick fog for example.
NOTE! The messages above are only shown if the ignition key is in
position II and BLIS is active (i.e. if the driver has not switched off the
system).
109
Wheels and tyres
General about wheels and tyres 110
Tyre pressures 112
Wear, Changing the tyres, Spare wheel 113
Changing wheels 114
Temporary puncture repair and tools 116
110
General
New tyres
Bear in mind that tyres are perishable goods - after a
few years they begin to harden while their friction
properties deteriorate little by little. Try to use fresh
tyres when changing.
This is especially important for winter tyres. The week
and year of manufacture is indicated with 4 digits (e.g.
1502 indicates tyres manufactured week 15, 2002).
General wheels and tyres
All tyres have a dimension designation, such as 215/55R16 93W.
These tyre size designations, which are used by all tyre manufacturers,
can be interpreted as follows:
215 section width (mm)
55 relationship between the section height and breadth (%)
R means radial tyre
16 wheel rim diameter in inches (")
93 code digits for maximum permissible tyre load, in this
case 650 kg
W specifies that the tyre is manufactured for speeds up to
270 km/h (167 mph).
Your car is fully approved, which means that you may not deviate from
those dimensions and performance ratings indicated in the vehicle
registration. The only exception from these regulations concerns winter
tyres and studded tyres, which may have different dimensions and a
different speed rating than indicated in the registration. If you select tyres
with different dimensions, do not drive at speeds faster than those
permitted. The most common speed ratings are indicated in the following
table:
Q 160 km/h, used most often with studded tyres
T 190 km/h
H 210 km/h
V 240 km/h
W 270 km/h
Note: maximum permissible speeds indicated.
When you change tyres: be sure to use the same type (radial), dimension,
designation, and brand on all four wheels. Otherwise, there is a risk that
the handling characteristics of the car could change. Check with your
dealer regarding dimensions which are available for your car. Keep in
mind that the road surface can determine how fast you may drive, not the
tyre speed rating.
7700444d
111
Winter tyres
We recommend the use of winter tyres, size 195/65 R15 except for cars
with turbo engines. For these cars we recommend tyre size 205/55 R16.
Always use winter tyres on all four wheels!
NOTE: Always consult your Volvo dealer as to which wheel and tyre
type is appropriate for your car.
Studded winter tyres
Studded winter tyres should be run in for 500-1000 kilometres
(300-600 miles), softly and gently so that the studs sit in the tyre correctly.
This extends the service life of both the tyres and the studs while making
the drive a bit quieter. Ensure that the studded tyres have the same
direction of rotation throughout their lifetime. If you wish to shift wheels,
see to it that they remain on the same side as previously.
Please remember: The regulations for using studded tyres vary from
country to country.
Snow chains
Snow chains may only be used on the front wheels. This also applies to
all-wheel drive cars.
Avoid driving on bare surfaces unnecessarily as this generates much wear
on both the snow chains and the tyres.
Locking wheel bolts
Locking wheel bolts can be used on both aluminium and steel rims.
If steel rims with locking wheel bolts are used in combination with wheel
covers then the locking wheel bolts must be fitted furthest from the air
valve. Otherwise the wheel cover cannot be fitted on the rim.
General
112
Tyre pressures
7700242d
WARNING!
The only Volvo approved “special wheel rims” are those tested by Volvo
and are Volvo Genuine parts .
Driving characteristics and tyres
Tyres affect driving characteristics greatly. Tyre type, size and pressure are
important to how the car performs. When you change tyres, be sure to use
the same type, size and brand on all four wheels. Follow the recommenda-
tions regarding tyre pressure.
The tyre pressure is important!
Check the tyre pressure regularly. The correct pressure is listed in the
adjacent table and on the decal on the inside of the fuel filler flap.
If you drive with tyres at the wrong pressure, the car’s handling will
be markedly impaired and tyre wear will increase.
Note that the values in the table refer to cold tyres (outside temperature).
Tyres get warm and pressure increases after just a few kilometres driving.
This is normal, so do not let out air if you check the pressure when the
tyres are warm. However, you should increase pressure if it is too low.
Remember that tyre pressure can vary depending on exterior temperature.
Therefore check the tyres outdoors when the tyres are cold.
Tyre pressure table
The tyre pressure decal on the inside of the fuel
filler flap shows what pressure the tyres should
have with different load and speed conditions.
Important!
Only Volvo-approved snow chains are permitted. Use of other snow
chains could damage your car.
Never drive faster than 50 km/h when snow chains are fitted!
Never use ”quick links” because the space between the disc brakes
and the wheels is too small.
113
Wheels and tyres
Spare wheel Temporary Spare
(certain markets)
The “Temporary Spare” should only be used for the short time it takes to
repair or replace the normal tyre.
By law it is only legal to temporarily use the spare wheel/tyre in
connection with tyre damage. A wheel/tyre of this type should
therefore be replaced by a normal wheel/tyre.
Bear in mind that this tyre combined with the other normal tyres may
cause different driving characteristics.
The maximum speed with a “Temporary Spare” is therefore
80 km/h (50 mph).
NOTE! Only use the car’s original spare wheel! Tyres of other dimen-
sions may damage your car. Only one spare wheel may be used at a time.
Tyres with tread wear
indicators
Tread wear indicators are narrow, raised areas
across the tread that have approximately
1.6 mm less tread depth than the remainder of
the tyre (the letters TWI are on the side of the
tyre). When this bar is visible, only 1.6 mm of
tread remains and the tyre should be replaced
immediately. Bear in mind that road grip and
the tyre's ability to push water out of the way is
already affected markedly when there is 3-4 mm
7700312m
of remaining tread.
Changing the tyres - summer/winter
When you change between summer and winter tyres; mark on the tyre
which side they were fitted: For example, L = left, R = right.
NOTE! Tyres should have the same direction of rotation throughout their
life. Tyres with tread designs that are made to roll only in one direction,
have the direction of rotation marked with an arrow on the tyre.
If the tyres are fitted incorrectly this will impair the car's braking characte-
ristics and the ability to disperse rain, snow and slush.
IMPORTANT!
Tyres with the greatest tread depth should always - irrespective of rear
or front wheel drive - be fitted at the rear.
Contact your closest Volvo dealer to check if you are unsure.
Storage
Wheels should be stored horizontally or suspended, not vertically.
114
The spare wheel is stored under the carpet in the cargo compartment.
Remember to set out the warning triangle.
· Apply the parking brake and put into first gear on cars with manual
transmission - position P on cars with automatic transmission.
Put chocks in front and behind of the wheels that are to remain on the
ground.
· Cars with steel wheel rims have removable wheel covers. Prise off
the wheel cover with a thick screwdriver or the like. If tools are not
available, the wheel cover can be prised off by hand. Use protective
gloves. When you reinstall the wheel covers: ensure that the wheel
cover valve hole is opposite the wheels air valve.
Changing wheels
· Cars with aluminum rims with a cover: remove the cover using the
socket wrench.
· Loosen the wheel nuts 1/2-1 with the socket wrench. The nuts are
loosened by turning anticlockwise.
There are two jacking points on each side of the car. The jacking points
are marked on the door sill trims.
770
0
Remove wheel studs
770
0
7700
4
0
1r
115
· Hold the jack against the pin in the jacking point as illustrated and
wind down the jack foot so that it is pressed flat against the
ground.
· Check again that the jack is mounted correctly according to
illustration and that the foot is positioned vertically under
mounting.
· Lift the car so that the wheel is free.
· Remove the wheel studs and lift off the wheel.
WARNING!
· Never crawl under the car when it is raised on a jack!
· The car and the jack should be on a solid horizontal surface.
· The car original jack should be used for wheel changing.
All other work on the car should be carried out using workshop
jacks and axle stands under the part of the car which is raised.
· Apply the parking brake, put into 1st gear or back up (reverse)
on manual transmission and position P on the automatic
transmission.
· Put chocks in front of and behind the wheels to remain on the
ground.
· Use large wooden blocks or large stones.
· The jack screw should be kept well lubricated.
Fitting
· Clean the contract surfaces on the wheel and hub.
· Mount the wheel and tighten the wheel bolts.
· Lower the car so that the wheels cannot rotate. Tighten the wheel studs
crosswise and in torque steps. Tightening torques: 140 Nm
(14.0 kpm). It is important that they are tightened to the correct torque.
Tightening should be checked with a torque wrench.
· Fit the hub cap.
· Screw the jack together before returning it to the cargo compartment.
· Ensure that the jack and tool kit are properly secured and do not cause
any rattling.
Changing wheels
The jack should be located so
7700245d
7700244d
116
Temporary puncture repair and tools
General
Cars which do not have a spare tyres are instead
equipped with an emergency puncture repair kit.
This kit can be used to both seal a puncture and
to check and adjust tyre pressure. The kit
consists of an electric air compressor and an
integrated canister with sealant.
Emergency puncture repair kit
1
The emergency puncture repair kit is only
intended to work as a temporary repair so that
the car can be driven no more than 200 km or to
the nearest tyre centre. The sealant has the
ability to effectively seal tyres which have
punctures in the tread.The canister with the
sealant should be replaced before the expiration
date has passed or after the emergency repair kit
has been used. See page 120 for information
about replacing the canister.
1
Certain variants and markets
NOTE! The emergency puncture repair kit is
only intended for the sealing of tyres with a
puncture in the tread. The emergency puncture
repair kit has limited abilities to seal tyres which
have punctures in the wall. Do not seal tyres
with the emergency puncture repair kit if they
have larger slits, cracks, irregularities or similar
damage.
The emergency puncture repair kit with
compressor and tools is found under the floor
in the luggage compartment. 2 V sockets for
connecting the compressor are located by the
centre console in the front, by the backseat and
in the cargo compartment
1
. Choose the socket
which is nearest to the punctured tyre.
Taking out the emergency puncture
repair kit
1. Pull up the floor mats, front and rear.
2. Lift up the emergency puncture repair kit.
WARNING!
The sealant can cause irritation if it comes
into direct contact with skin.
In the event of contact with skin, wash away
the fluid with soap and water.
117
WARNING!
Inhaling car exhaust fumes can result in
danger to life. Never leave the engine running
in sealed areas or areas that lack sufficient
ventilation.
Inflating tyres
Set up the warning triangle if a tyre must be
inflated in an area where there is other traffic.
· Ensure that the orange-coloured switch (2)
is in position 0 and take out the cable (5) and
air hose (4) from the side compartment (3).
· Screw the air hose’s valve connection to the
bottom of the thread on the tyre’s air valve.
· Connect the cable (5) to one of the cars
12 V sockets.
· Start the engine. The car must be in a well-
ventilated area.
· Start the compressor by setting the switch
(2) to position I.
· Pump up the tyre to the pressure specified
on the tyre pressure decal.
· Turn off the compressor; the switch (2)
should be in position 0. Disconnect the air
hose and the cable. Refit the valve’s dust
cap.
· Return the cable (5) and air hose (4) to the
side compartment (3).
· Put the puncture repair kit back under the
floor in the cargo compartment.
The compressor should not run for more than
10 minutes at a time.
Let it cool afterwards as there is a risk of
overheating. Objects with a volume of
up to 50 litres can be pumped up with the
compressor.
Temporary puncture repair and tools
118
Temporary puncture repair and tools
WARNING!
Inhaling car exhaust fumes can result in
danger to life. Never leave the engine
running in sealed areas or areas that lack
sufficient ventilation.
WARNING!
Never stand next to the tyre when the
compressor is running. Be particularly
observant of the tyre walls. If cracks,
irregularities or other damage appears, turn
off the compressor immediately. Under these
circumstances do not continue your journey.
Contact an authorised tyre centre.
WARNING!
Do not drive faster than 80 km/h after the
emergency puncture repair kit has been used.
The temporarily sealed tyre must be changed
as soon as possible (maximum driving
distance 200 km).
Sealing punctured tyres
Set up the warning triangle if an emergency
tyre repair must be carried out in an area where
there is other traffic.
· Remove the decal (1) regarding the highest
permitted speed from the emergency
puncture repair kit and stick it on the
steering wheel where it can be clearly seen
by the driver.
· Ensure that the orange-coloured switch (2) is
in position 0 and take out the cable (5) and
air hose (4) from the side compartment (3).
· Screw the air hose’s valve connection to the
bottom of the thread on the tyre’s air valve.
· Connect the cable (5) to the cars 12 V
socket.
· Release the safety catch (6) and turn the
orange-coloured part (7) 90° to the vertical
position, until there is an audible click.
· Start the engine. The car must be in a well-
ventilated area.
· Start the compressor by setting the switch
(2) to position I. A temporary increase in
pressure of maximum 4 bar occurs while
the sealant is being pumped in. After about
one minute the pressure drops and the
manometer indicates a more correct tyre
pressure.
· Pump the tyre to a pressure of between 1.8
bar and 3.5 bar. If the pressure does not
reach 1.8 bar after 10 minutes of pumping,
the compressor should be turned off so as
to avoid overheating.
· Undo the air hose (4) from the air valve and
refit the dust cap. Disconnect the cable (5)
from the electric socket. Fold the orange-
coloured part (7) back into its original
position and secure the catch (6). Store the
emergency repair kit in a safe place in the
car.
· Immediately drive about 3 km at no more
than 80 km/h, so that the sealant is able to
seal the tyre well.
119
· Check the tyre pressure again:
NOTE! Do not open the orange-coloured
part (7) when only the compressor will be
used for inflating.
1) Connect the air hose (4) to the air valve
on the tyre.
2) Connect the cable (5) to the 12 V socket.
3) Read the pressure on the compressor.
If the tyre pressure is below 1.3 bar, the tyre
has not been sealed sufficiently.
Under these circumstances, do not continue
your journey. Contact a tyre centre.
· If the tyre pressure is higher than 1.3 bar,
the tyre should be pumped up to the
pressure indicated on the tyre pressure
decal. See page 112 for its location. Release
pressure with the reduction valve (8) if the
tyre pressure is too high.
· Turn off the compressor; the switch (2)
should be in position 0. Disconnect the air
hose and the cable. Refit the valve’s dust
cap.
· Return the cable (5) and air hose (4) to the
side compartment (3).
· Put the puncture repair kit back under the
floor in the cargo compartment.
The compressor should not run for more than
10 minutes at a time. Let it cool afterwards as
there is a risk of overheating.
The canister with sealant and hose should be
replaced after use.
Temporary puncture repair and tools
120
Temporary puncture repair and tools
WARNING!
Ensure the compressor is not connected to the
12 V socket when the canister is replaced.
WARNING!
Read the safety instructions on the bottom of
the canister.
Replacing the sealant
canister
The sealant canister should be replaced before
the expiration date has passed, see date decal
(1), or after the tyre has been sealed. After use,
the canister (6) with holder (8) and air hose
(10) should be replaced.
Replacement can be carried out by an authori-
sed Volvo workshop or according to the
instruction.
Replace the canister before the
expiration date has passed
· Undo the two screws (2) on the orange-
coloured casing (3).
· Remove the speed decal (4) and date decal
(1), and open the safety catch (5). Loosen
the casing (3) and remove it.
· Unscrew and remove the canister (6).
· Check that the seal (7) on the new canister
is not damaged. Screw the canister into
place.
· Refit the casing (3). Check that the casing is
correctly mounted, screw it on with the
screws (2).
· Put the speed decal(4) and new date decal
(1) back on the puncture repair kit.
Treat the removed canister as environmentally
hazardous waste.
Replacing the canister and hose
after use
· Undo the two screws (2) on the orange-
coloured casing (3).
· Remove the speed decal (4) and date decal
(1), and open the safety catch (5). Loosen
the casing (3) and remove it.
· Push down the button (8) while turning the
canister (6) and holder (9) clockwise.
· Pull out the air hose (10).
· Wipe off remaining sealant with a rag or
scrape it away if it is has already dried.
· Fit a new air hose (10); check that it is
positioned correctly.
121
Temporary puncture repair and tools
· Check that the seal (7) on the new canister
is not damaged. Screw the holder (9) onto
the canister (6) and turn it anticlockwise
until there is an audible click.
· Refit the casing (3). Check that the casing is
correctly mounted, screw it on with the
· Put the speed decal(4) and new date decal
(1) back on the puncture repair kit.
The empty canister and air hose can be treated
as normal waste.
122
123
Fuses, bulb replacement
Fuses 124
Relay/fuse box in the engine compartment 125
Fuses in the passenger compartment at dashboard end on driver’s side 126
Fuses in the passenger compartment within the sound
barrier on the driver’s side 127
Fuses in the cargo compartment 128
Bulb replacement 129
124
3703474d
Fuses
All electrical functions and components are
protected with a number of fuses to protect
your cars electrical system from damage by
short-circuits or overloads.
Fuses are housed in four different locations in
the car:
1. Relay/fuse box in the engine compartment.
2. Fuse box in the passenger compartment
within the sound barrier on the drivers
side.
3. Fuse box in the passenger compartment at
dashboard end on drivers side.
4. Fuse box in the cargo compartment.
If an electrical component or function does not
operate it may be because the component fuse
was temporarily overloaded and burned out.
Look in the fuse diagram to locate the affected
fuse. Pull out the fuse and look at it from the
side to see if the curved wire is burned out.
Replace with a new fuse of the same colour and
ampere designation.
There are a number of spare fuses in the cover
on the end of the dashboard. There are also
pliers to assist you in pulling out and replacing
the fuses.
If the same fuse burns out repeatedly, there is a
fault in the component, and you should visit
your Volvo workshop to have it checked.
125
3702167
m
8
7
6
5
4
3
2
1
16
15
14
13
12
11
10
9
24
23
22
21
20
19
18
17
XXXXXX
Fuse pliers
Intact fuse
Blown fuse
A. Press in the catches on the rear of the box and pull the cover up.
A
Fuses in the engine compartment
Fuses in the engine compartment
This fuse box contains 24 fuse positions. Be
sure to replace a blown fuse with a new fuse of
the same colour and amperage. There are also a
number of spare fuses.
9. Gas tank valve (Bi-fuel LPG) .............. 10
10. – ..............................................................
11. Ignition coils (petrol), relay coils .......... 20
12. – ..............................................................
13. Windscreen wiper ................................. 25
14. ABS ...................................................... 30
15. – ..............................................................
16. – ..............................................................
17. Dipped beam (left) ................................ 20
18. Parking lamps (front) ........................... 15
19. ABS ...................................................... 30
20. Dipped beam (right) ............................. 20
21. Fuel pump ............................................. 15
22. Starter motor ......................................... 35
No Ampere rating
1. Parking heater (option) ......................... 25
2. Auxiliary lamp (option) ........................ 20
2. Throttle (5-cyl. without turbo/Bi-fuel) ... 10
4. Oxygen sensors (petrol), Engine
Control Module (ECM) (diesel),
high-pressure valve (diesel) ................. 20
5. Crankcase ventilation heater, solenoid
valves, Fuel distributor (Bi-Fuel) ......... 10
6. Mass air flow sensor, engine control
module, injectors (petrol) ..................... 15
Mass air flow sensor (diesel) ............... 10
7. – .............................................................
8. AC compressor, accelerator position
sensor, fan electronic box ..................... 10
23. Engine control module Engine Control
Module (ECM) supply, engine relay
(ECR) coil ............................................. 10
24. – ..............................................................
126
22
24
23
21
29
27
28
26
25
9
8
7
19
18
17
16
4
5
6
3
2
13
14
15
12
11
38
36
37
33
34
35
31
32
20
1
10
30
3701482D
This fuse box contains 38 fuse positions. Fuses
are located inside the access panel on the end
face of the dashboard. There are also a number
of spare fuses.
11. Amplifier .............................................. 30
12. RTI display ........................................... 10
13. Telephone ............................................... 5
14. – ..............................................................
15. – ..............................................................
16. – ..............................................................
17. – ..............................................................
18. – ..............................................................
19. – ..............................................................
20. – ..............................................................
21. – ..............................................................
22. – ..............................................................
23. – ..............................................................
24. – ..............................................................
25. – ..............................................................
26. – ..............................................................
27. – ..............................................................
28. – ..............................................................
29. – ..............................................................
30. – ..............................................................
31. – ..............................................................
32. – ..............................................................
33. – ..............................................................
34. – ..............................................................
35. – ..............................................................
36. – ..............................................................
37. – ..............................................................
38. – ..............................................................
No Ampere rating
1. Power driver’s seat ............................... 25
2. Power passenger seat ........................... 25
3. Climate control system fan ................... 30
4. Control module, right front door .......... 25
5. Control module, left front door ............ 25
6. General lighting, ceiling (RCM),
Upper Electronic Module (UEM) ........ 10
7. Sunroof ................................................. 15
8. Ignition switch, SRS system, Engine
Control Module (ECM), SRS
deactivation on passenger side
(PACOS), immobilizer (IMMO) ........ 7,5
9. OBDII, light switch (LSM), Steering
Angle Sensor (SAS), Steering Wheel
Module (SWM) ...................................... 5
10. Audio .................................................... 20
Fuses in the passenger compartment at dashboard end on drivers side
127
3703457r
1
2
3
4
56
7
8
9
10 11
12
13
14 15
16
17
18
19 20
21 22 23
24
25 26
27
28
29
30
Fuses in the passenger compartment within the sound barrier on the drivers side
This fuse box contains 36 fuse positions. The
fuses are located within the sound barrier on the
left-hand side. Be sure to replace a blown fuse
with a new fuse of the same colour and
amperage. Several spare fuses are found here as
well.
No Ampere rating
1. Seat heating, right side .......................... 15
2. Seat heating, left side ............................ 15
3. Horn ..................................................... 15
4. – ..............................................................
5. – ..............................................................
6. Reserve ...................................................
7. Reserve ...................................................
8. Alarm siren ............................................. 5
9. Brake lamp switch feed .......................... 5
10. Combined instrument panel (DIM),
climate control (CCM), parking heater,
power drivers seat ............................... 10
11. Front and rear seat socket ..................... 15
12. – ..............................................................
13. Reserve ...................................................
14. Headlamp wipers .................................. 15
15. ABS, STC/DSTC ................................... 5
16. Bi-fuel, Electronically Controlled Power
Steering (ECPS), Bi-Xenon, headlamp
levelling ................................................ 10
17. Fog lamp, front left .............................. 7,5
18. Fog lamp, front right ........................... 7,5
19. Reserve ...................................................
20. Reserve ...................................................
21. Transmission Control Module (TCM),
reverse gear inhibitor (M66) ................ 10
22. Main beam, left ..................................... 10
23. Main beam, right .................................. 10
24. – ..............................................................
25. – ..............................................................
26. Reserve ...................................................
27. Reserve ...................................................
28. Power passenger seat, audio .................. 5
29. Reserve ...................................................
30. BLIS ....................................................... 5
31. Reserve ...................................................
32. Reserve ...................................................
33. Vacuum pump ...................................... 20
34. Washer pump, headlamp wipers........... 15
35. – ..............................................................
36. – ..............................................................
128
9
7
6
8
12
4
3
5
3703477d
101112
28
14
27
13
37
38
222021
23
3029
2524 26
18171516 19
32 36353433
31
Fuses in the cargo compartment
The fuses are located behind the upholstery on
the left-hand side. Be sure to replace a blown
fuse with a new fuse of the same colour and
amperage.
No Ampere rating
1. Reversing lamp ..................................... 10
2. Parking lamps, fog lamps, cargo
compartment lighting, numberplate
lighting, LEDs in brake lighting ........... 20
3. Accessories (AEM) .............................. 15
4. Reserve ...................................................
5. REM electronics ................................... 10
6. CD changer, TV, RTI........................... 7,5
7. Towing bracket wiring (30-feed).......... 15
8. Cargo compartment socket ................... 15
9. Rear right door: power window,
power window lock .............................. 20
10. Rear left door: power window, power
window lock ......................................... 20
11. Reserve ...................................................
12. Reserve ...................................................
13. Diesel filter heater ................................. 15
14. - ................................................................ -
15. Reserve ...................................................
16. Reserve ...................................................
17. Audio accessories ................................... 5
18. Reserve ...................................................
19. Foldable head restraint .......................... 15
20. Towing bracket wiring (15-feed) ......... 20
21. Reserve ...................................................
22. – ..............................................................
23. AWD ................................................... 7,5
24. Four-C SUM ........................................ 15
25. – ..............................................................
26. Parking assistance .................................. 5
27. Main fuse: towing bracket wiring, Four-
C, parking assistance ............................ 30
28. Central locking system (PCL) .............. 15
29. Trailer lighting, left: parking lamp,
direction indicator ................................. 25
30. Trailer lighting, right: brake lamp, fog
lamp, direction indicator ....................... 25
31. Main fuse: Fuse 37, 38 ......................... 40
32. – ..............................................................
33. – ..............................................................
34. – ..............................................................
35. – ..............................................................
36. – ..............................................................
37. Rear window defroster ......................... 20
38. Rear window defroster ......................... 20
129
Replacing bulbs
3500534d
General
All bulb specifications are found on page 164.
The following list contains bulbs and point-
source lamps that are specialised or unsuitable
for changing except by a workshop:
· General interior lighting in the ceiling
· Ceiling lighting
· Reading lamps
· Glovebox lighting
· Direction indicators in the door mirrors
· Approach lighting in the door mirrors
· High-level brake light
· Bi-Xenon headlamps
Important!
Never touch the bulb glass with your fing-
ers. Grease and oils from your fingers are
vaporised by the heat, coating and damaging
the reflector.
WARNING!
On cars with Bi-Xenon headlamps, all
work on the lights should be carried out by
an authorised Volvo workshop.
Bi-Xenon headlamps must be handled
with extreme care due to the high-voltage
unit.
130
3500903d
Front position/parking lamp*
· Switch off all lights and turn ignition key to
position 0.
· Remove the main headlight cover by
turning it anticlockwise.
· Pull out the bulb and its socket. Replace the
bulb.
· Press the bulb and its socket back into
place.
· Check that the new bulb lights.
· Screw the cover back into place; “TOP”
should be up!
Replacing bulbs
Dipped and main beam
Replace headlamp bulbs from the engine
compartment.
· Switch off all lights and turn ignition key
to position 0!
· Open the bonnet.
· Remove the cover by twisting
anticlockwise (1).
· Pull off the connector (2).
· Disconnect the spring clamp. First push to
the right so that the spring disconnects and
then out and down (3).
· Pull the bulb out and replace with a
new one (4).
· Replace the bulb (1). It can only be fitted
in one position.
3500535d
2
3 4
1
3500536d
3
1
TOP
4
2
· Press the clamp spring upwards and a little
to the left so that it secures in its catch (2).
· Press the connector back into place (3).
· Screw the cover back into place
; “TOP”
should be upwards (4)!
131
Replacing bulbs
Left-hand rear edge of car
Replacing bulbs in the rear
lamp cluster
All bulbs in the rear lamp cluster can be
replaced from inside the cargo compartment.
· Switch off all lights and turn ignition key to
position 0.
· Unlock and fold down the side panel
inwards to allow access to the bulbs. On the
right-hand side, it is easier to access the
bulbs if you first extend the load curtain as
much as possible.
The bulbs are located in a removable lamp
holder which is secured with two locking pins.
To replace bulbs in the lamp holder:
· Press the locking pins towards one another
in order to remove the lamp holder from the
lamp housing.
· Replace the bulb.
· Press back the lamp holder.
· Close and secure the side panel.
Location of bulbs in rear lamp
cluster
1. Position lamp
2. Position/Parking lamp/
Foglampbulb
3. Position
4. Reversing lamp
5. Position
(side marker) light
NOTE! If the error message "LAMP
FAULT" / "CHECK BRAKE
LIGHT" remains after a faulty bulb
has been replace then an authorised
Volvo workshop needs to be consulted
to rectify the fault.
4
3
1
2
5
3501688d
NOTE! LED brake light bulbs should be
replaced at a Volvo workshop.
Replacing bulb in front corner
· Switch off all lights and turn ignition key to
position 0.
· Using a screw driver, press the guide lug
and pull out the entire lamp housing.
· Press down the spring clip and undo the
connector from the lamp housing.
· Twist the bulb holder anticlockwise and
remove it.
· Press the bulb inwards, turn it anticlockwise
and remove it from the bulb holder.
· Replace with a new bulb and refit the bulb
holder in the lamp housing.
· Press the connector back onto the lamp
holder.
· Switch on the ignition and check that the
new bulb lights.
· Press the lamp housing home and check that
it is seated securely.
3500893d
132
Replacing front fog lamp bulb
NOTE! Never touch the bulb glass with
your fingers.
· Switch off the lights and turn the ignition
key to position 0.
· Turn the bulb holder a little anticlockwise.
· Remove the bulb and replace with a new.
· Refit the bulb holder. (The profile on the
bulb holder aligns with the profile on the
base of the lamp).
· Replace the bulb holder by turning a little
clockwise. The marking "TOP" on the
headlamp cover should be upwards!
Replacing bulbs
3500894d
3500889d
3500903d
Replacing position/
parking lamp bulb
· Switch off all lights and turn ignition key
to position 0.
· Remove the main headlight cover by turning
it anticlockwise.
· Pull out the bulb and its socket. Replace
the bulb.
· Press the bulb and its socket back into
place.
· Check that the new bulb lights.
· Screw the cover back into place; “TOP”
should be up!
Replacing side
direction indicator bulb
· Open the front door halfway.
· Insert your hand behind the front wing and
press out the lamp. Allow the cables to
remain in the bulb holder.
· Twist the bulb holder 1/4 turn anticlockwise
and pull straight out.
· Pull the defective bulb straight out.
· Replace the bulb and press the lamp
straight in.
133
3500916d
Replacing numberplate
lighting bulb
· Switch off the lights and turn the ignition
key to position 0!
· Remove the screw with a screwdriver.
· Loosen the whole lamp housing carefully
and pull it out.
· Turn the connector anticlockwise and pull
out the bulb.
· Replace bulb.
· Reinstall the connector and turn it clockwise.
· Reinstall and screw the whole lamp housing
into place.
Replacing bulbs
Replacing courtesy lighting
bulb - front door
The courtesy lighting is under the dashboard
on the drivers and passenger sides. Carry out
the following to replace:
· Insert a screwdriver and twist lightly so
that the lamp housing loosens.
· Remove the faulty bulb and install a new
bulb.
· Check that lamp lights and reinstall the
lamp housing.
3500871d
3500888D
Replacing courtesy lighting
bulb - rear door
· Insert a screwdriver and twist lightly so that
the lamp housing loosens.
· Undo the cable from the lamp housing and
then remove the glass from the lamp
housing by pressing the two side clips
outward.
· Pull out the old bulb and fit a new one.
· Refit in the reverse order.
134
Replacing bulbs
Replacing the make up-mirror
bulb
· Insert a screwdriver and gently turn so that
the glass loosens.
· Prise out the bulb and replace with a new
one.
· Press the lamp glass back into place and
make sure it is secured correctly.
3500891d
Replacing side marker bulb
· Press the entire lamp insert backwards and
remove.
· Try if possible to remove the lamp insert
with your fingers. Otherwise, use a plastic
or wooden tool so as not to damage the
paintwork.
· Turn the lamp holder anticlockwise and
remove.
· Install a new bulb.
· Insert the lamp holder and turn it clockwise.
· Refit the lamp insert by pressing it into
place in the body.
3501378m
Replacing cargo
compartment bulb
The lighting is to the left and right of the boot
lid. Carry out the following to replace:
· Insert a screwdriver and twist lightly so that
the lamp housing loosens.
· Remove the faulty bulb and install a new
bulb.
· Check that the lamp lights and reinstall the
lamp housing.
3500918d
Insert screwdriver and turn carefully
135
Car care and Service
Rustproofing 136
Checking and repairing paintwork damage 137
Washing 138
Volvo Service 141
Bonnet, Engine Compartment 143
Diesel 145
Engine oil 146
Coolant 147
Brake fluid, Power steering, Windscreen washer fluid 148
Battery care 149
Replacing wiper blades 151
136
Rustproofing
Rustproofing - check and repair
Your Volvo received a very thorough and complete rustproofing at the
factory. Areas that are extremely vulnerable, such as the underbody,
have been sprayed with a thick, wear-resistant anti-corrosion compound
on the outside. Members, cavities and enclosed sections are sprayed
internally with a thin, penetrating rust inhibitor.
The cars rustproofing is maintained by doing the following:
· Keep the car clean! Wash chassis components*, the underbody,
and the inside and edges of wheel arches with a pressure washer.
When high pressure washing - hold the spray nozzle at least 30 cm
away from painted surfaces!
· Check and repair the rustproofing regularly.
* Trailing arms, link arms, spring mountings and spring strut seats.
The cars rustproofing does not normally require treatment for approxima-
tely 8 years. After that time, it should be treated at three year intervals. If
your car requires treatment, consult your Volvo workshop.
Improving
If you want to repair the rustproofing yourself, make sure the area is clean
and dry. Hose down, wash and dry the car thoroughly. Use a rustproofing
agent in a spray can or one that is intended for brush application.
Two types of rustproofing agent are available:
a) thin (colourless), for visible places
b) thick, for areas prone to wear on the underbody and in the wheel
arches
Possible repair areas with these agents:
· Visible welds and sheet metal joints - thin fluid
· Underbody and wheel arches - thick fluid
· Door hinges - thin fluid
· Bonnet hinges and catch - thin fluid
When you have finished treatment, excess rustproofer can be wiped off
using a rag dampened with white spirit.
Parts of the engine and suspension strut mountings in the engine bay
are treated at the works with a wax-based colourless rustproofing agent.
This withstands normal detergents without dissolving and losing its
rustproofing ability. On the other hand, if you wash the engine using
aromatic solvents such as turpentine or white spirit (especially those
which do not contain emulsifiers), the protective wax should be renewed
after washing. Your Volvo dealer has such waxes in stock.
137
Repairing paintwork damage
8100503A
Mask if necessary
Paint
Paint is an important part of the cars rustproo-
fing and should therefore be checked regularly.
Repair paintwork damage immediately so that it
does not start to rust. The most common types
of paintwork damage that you can repair
yourself are:
· minor stone chips and scratches
· damage to wing edges and sills
When repairing paintwork, the car should
be clean and dry with a temperature above
+ 15 °C.
Colour code
Make sure you have the right colour.
The colour code number is on the data plate in
the engine compartment.
0300048A
2. KG
1.
KG
KG
KG
VOLVO CAR CORP.
MADE IN
SWEDEN
Minor stone chips and
scratches
Material:
· Primer in a can
· Paint in a can or a touch-up pen
· Brush
· Masking tape
· If the stone chip has not gone down to the
bare metal and an unpainted colour coat
remains, you can add paint immediately
after removing dirt.
Do as follows if the stone chip went down to
the bare metal:
· Fasten a piece of masking tape over the
damaged surface. Then remove the tape,
removing any paint residue (illustration 1).
· Stir the primer thoroughly and apply using
a fine brush or matchstick (illustration 2).
· When the primer is dry, apply the surface
coat with a brush.
· Ensure that the paint is well stirred and
apply several thin coats allowing it to dry
between coats.
· The procedure is the same for scratches, but
masking tape can be used to protect
undamaged paintwork (illustration 3).
· Wait a day or so and then finish the repair
by polishing. Use a soft rag and apply
lapping paste sparingly.
Remove any paint residue with tape
Colour code
138
WARNING!
After washing: always test the braking so that damp and corrosion do
not affect the brake pads and impair the brakes! Depress the brake pedal
lightly now and again when driving
longer distances in the rain or slushy snow to warm up and dry
the brake discs and pads. You should also do this when starting
in very damp or cold weather conditions.
Washing
Wash the car frequently!
Wash the car as soon as it becomes dirty, especially in the winter when
road salt and moisture can lead to corrosion.
Wash the car as follows:
· Thoroughly hose off the dirt on the car underbody (wheel arches,
wing edges, etc.).
· Rinse the entire car to remove loose dirt.
· When using high pressure hose:
Ensure that the high pressure hose nozzle does not come nearer
than 30 cm from the bodywork. Do not spray directly at the locks.
· Wash with a sponge using a lot of water with or without detergent.
· You can use lukewarm (maximum 35 °C) but not hot water.
· If the dirt is ingrained, you can wash the car with cold degreasing
agent, but then be sure that there is a drain separator where you are
washing the car. When using cold degreasing agent, ensure that the
car is not in direct sunlight or that the paint is warm from sunlight
or a warm engine. Sunlight and heat can cause permanent damage.
Consult your Volvo workshop.
· Dry the car with a clean, soft chamois.
· Clean the wiper blades with a lukewarm soap solution.
Suitable detergent:
Car shampoo.
Keep in mind the following:
Always wash off bird droppings from the paintwork as fast as
possible.
Bird droppings contain chemicals that affect and discolour paintwork
quickly. The discoloration cannot be polished off.
WARNING!
Do not wash the engine when it is still warm. Fire risk!
139
Washing
Cleaning the upholstery
Treating marks on fabric
A special cleaning agent available at your Volvo dealer is recommended
when cleaning fabric upholstery. Other chemicals can impair the fire
retardant qualities of the upholstery.
Automatic car wash
An automatic car wash is a simple and fast way of washing the car.
Remember that an automatic car wash can never replace a proper
handwash.
The brushes of an automatic car wash do not reach all areas.
During the first months of the cars life it is recommended that you only
handwash the car.
Polishing and waxing
Polish and wax the car when you feel the paintwork is matte and when
you wish to give the paintwork extra protection, such as before winter.
The car does not usually need polishing until after one year. It can be
waxed earlier.
Wash and dry the car thoroughly before you begin polishing and/or
waxing. Clean away asphalt or tar splashes with Volvo asphalt remover
or white spirit.
Stubborn marks can be removed with fine rubbing paste for car paint-
work. First polish and then wax with liquid or solid wax. Carefully
follow the instructions on the package. Many preparations contain both
polish and wax.
Do not wax or polish in direct sunlight.
Treating marks on vinyl and plastic components
A special cleaner available from your Volvo dealer is recommended for
cleaning interior vinyl and plastic components. Never scrape or rub a
stain. Never use strong stain removers. Dry with a weak soap solution
and tepid water.
Treating marks on leather
A special cleaning agent available at your Volvo dealer is recommended
when cleaning leather upholstery.
Use the Volvo leather care kit once or twice a year to preserve suppleness
and comfort.
Never use strong detergent, petrol, alcohol, white spirit, etc. as such
strong substances can damage fabric, vinyl and leather upholstery.
Cleaning seat belts
Use water and synthetic detergent. Special upholstery detergent is
available from your Volvo dealer.
Make sure the seat belt is dry before allowing it to retract.
IMPORTANT!
Sharp objects and Velcro may damage the textile upholstery.
140
Cleaning door mirrors and front side
windows with water-repellent coating (option)
Never use products such as car wax, degreaser or similar on mirror/glass
surfaces as this could ruin their water-repellent properties.
Var försiktig vid rengöring så att inte glasytan repas.
För att undvika skador på glasytan vid isborttagning - använd endast
isskrapa av plast.
There is natural wear of the water-repellent coating.
NOTE! Treatment with a special finishing agent available from Volvo
dealers is recommended in order to maintain the water-repellent proper-
ties. This should be used first after three years and then each year.
Washing
141
Volvo Service
Before the car left the factory, it was thoroughly test driven. It was
checked again in accordance with Volvo Car Corporation regulations
before it was handed over to you.
Volvo service programme
In order for you to keep your Volvo at the highest level of traffic safety,
driving safety and reliability you should follow the Volvo service
programme which is specified in the Warranty and Service schedule.
We advise you always to let a Volvo workshop carry out the servicing
and repair work. Your Volvo workshop has the personnel, the special
tools and the service literature which guarantees you the highest quality
of service. Your Volvo workshop always uses Volvo Genuine parts.
The Volvo Service schedule is developed for the normal motorist.
Important!
For the Volvo warranty to apply, check and follow the instructions in
the Service and Warranty Manual.
Volvo Service
Adverse driving conditions
Change engine oil and replace air and oil filters more often than recom-
mended in the Service and Warranty Booklet when driving in adverse
conditions.
Adverse driving conditions include:
· Prolonged driving in dusty/sandy conditions
· Prolonged driving with caravan or trailer
· Prolonged driving in mountainous areas
· Prolonged driving at high speeds
· Prolonged idling and/or driving at low speeds
· Driving in low temperatures - below 0 °C - along shorter distances;
less than 10 km.
Service or installation of accessories
Service or installation of accessories that affect the cars electrical system
can only be carried out using electronic equipment specially developed
for the car.
It is therefore important that you always contact your Volvo workshop
before beginning or carrying out service work that affects the electrical
system.
Recording vehicle data
One or more computers in your Volvo car can record detailed information.
This information is intended for research purposes in order to further
develop safety and to diagnose faults in certain systems. It can included
data such as seat belt usage by the driver and front passenger, information
on the function of different systems and modules in the car and informa-
tion on the status of the engine, throttle control, steering, brake and other
systems.This information can contain data on the drivers driving style.
Such data can contain information including, but not limited to, vehicle
speed, use of the brake or accelerator pedal and steering wheel manoeuv-
res. The latter data can be stored for a limited time while the car is driven
and during the course of a collision or a near miss.
Volvo Car Corporation will not distribute this stored information without
permission. Volvo Car Corporation may, however, be forced to provide
this information if required by national legislation.
In general, Volvo Car Corporation and authorised workshops may read
and use the information.
142
WARNING!
The car ignition system has very high voltage!
The voltage in the ignition system is dangerous!
Do not touch spark plugs, ignition cables or the ignition coil when
the engine is running or the ignition is switched on!
The ignition should be switched off when:
· Conducting engine tests.
· Replacing parts in the ignition system, such as spark plugs,
ignition coil, distributor, ignition cables, etc.
Volvo Service
7700243d
Note the following before you begin
working on your car:
Battery
· Ensure that the battery cables are correctly connected and tightened.
· Never disconnect the battery when the engine is running (e.g. when
replacing the battery).
· Never use a fast charger to charge the battery. The battery cables
should be disconnected when recharging.
Environmental care
The battery contains acid that is both corrosive and poisonous.
It is important that the battery is handled in an environmentally friendly
way. Let your Volvo dealer assist you.
Lifting the car
If the car is lifted with a workshop jack, it should sit with the front edge
on the engine support arm. Do not damage the splashguard under the
engine. Ensure that the jack is positioned so that the car cannot slide off
the jack. Always use axle stands or the like.
If you lift the car using a two pillar workshop lift, ensure that the front and
rear lift arms are fixed under the lifting points on the door sill.
See the illustration.
143
Bonnet, Engine compartment - left-hand drive
WARNING!
Check that the bonnet lock properly when
you close it!
Opening the bonnet
Pull the handle on the far left under the
dashboard. You hear when the lock releases.
Insert the hand in the centre of the front edge
of the bonnet and press up the safety catch
handle. Open the bonnet.
...press up and open
Pull the handle..
8200092d
Engine compartment
1 Expansion tank, cooling system
2 Engine oil filler pipe
3 Engine oil dipstick
4 Clutch/brake fluid reservoir
5 Battery (in cargo compartment)
6 Data plate
7 Radiator
8 Power steering fluid reservoir
9 Air filter
10 Washer fluid reservoir
11 Main fuse box
12 Integrated relay/fuse box
WARNING!
Electric engine cooling fan:
Cooling fan may continue running and can
start itself after the engine is switched off!
10
7
8
1
3
2
1
2
11
6
2000305d9
4
5
2b
144
Bonnet, Engine compartment - right-hand drive
WARNING!
Electric engine cooling fan:
Cooling fan may continue running
and can start itself after the engine
is switched off!
WARNING!
Check that the bonnet locks properly
when you close it!
Opening the bonnet
Pull the handle on the far right under the
dashboard. You hear when the lock releases.
Insert the hand in the centre of the front edge of
the bonnet and press up the safety catch handle.
Open the bonnet.
..press up and open
Pull the handle...
8200095d
Engine compartment
1 Expansion tank, cooling system
2 Engine oil filler pipe
3 Engine oil dipstick
4 Clutch/brake fluid reservoir
5 Battery (in cargo compartment)
6 Data plate
7 Radiator
8 Power steering fluid reservoir
9 Air filter
10 Washer fluid reservoir
11 Main fuse box
12 Integrated relay/fuse box
10
7
8
1
3
2
1
2
11
6
2000306d
9
5
2b
4
145
Diesel
Fuel system
Only use diesel fuel from a well-known oil company that fulfils the
requirements for recommended fuel grade as described on page 162.
Never use diesel of doubtful quality. Special diesel fuel for winter use is
available from large oil companies. This fuel is less viscous at low
temperatures and reduces the risk of wax building up in the fuel system.
Keeping the tank well filled reduces the risk of condensation in the tank.
During filling you should check that the area around the filler pipe is
clean. If you do the refuelling from a tank of your own, you should
filter the fuel.
Avoid spilling onto the paintwork. Wash off any spills with detergent
and water.
Empty tank
No special procedures are required if the tank runs dry. The fuel system
is bled automatically if the ignition switch is kept in position II for
approx. 60 seconds before the start attempt.
Draining condensation water from fuel filter
The fuel filter removes condensation, which could otherwise affect engine
function, from the fuel. The fuel filter should be drained as specified in the
Service and Warranty Book, and when you suspect that the car has been
filled with contaminated fuel.
Important!
Diesel fuels not to be used: special
additives, Marine Diesel Fuel, fuel oil,
RME (Rape Methyl Ester), vegetable oil.
These fuels do not fulfil the requirements
of Volvos recommendation and generate
increased wear and engine damage that is
not covered by the Volvo warranty.
146
IMG-203460
Engine oil
Checking and changing the
engine oil and filter
Certain engine variants have an engine oil decal
on the bonnet. See page 154 for the location of
The specification on the decal indicates what
grade and viscosity the engine oil should have.
Specifications for all engine variants are found
on page 160.
The Service and Warranty Booklet specifies
suitable intervals for changing the oil and oil
filter. Shorter intervals are recommended if
driving in adverse conditions. See page 141.
Check the level of engine oil and change the oil
regularly.
Checking the oil level in a new car is especially
important before the first scheduled oil change.
The Service and Warranty Booklet specifies the
odometer readings for oil changes.
Volvo recommends checking the oil level every
2500 km.The most accurate measurements are
made on a cold engine before starting.
The measurement will be inaccurate if taken
immediately after the engine is switched off.
The dipstick will indicate that the level is too
low because the oil has not had time to flow
down into the oil sump.
NOTE! See recommended oil grade, viscosity
and capacities on page 160.
Checking the oil in a cold engine:
Wipe the dipstick clean before checking the
level.
Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
If the level is close to the MIN mark, start
by topping up with 0.5 litres of oil. Top up
until the oil level is nearer the MAX than
the MIN mark on the dipstick. See page 160
for volumes.
Checking the oil in a warm engine:
Park the car on a level surface, switch off
the engine and wait 10-15 minutes to give
the oil time to run back down to the sump.
Wipe the dipstick clean before checking the
level.
Check the oil level using the dipstick. The
oil level must be between the MIN and
MAX marks.
If the level is close to the MIN mark, start
by topping up with 0.5 litres of oil. Top up
until the oil level is nearer the MAX than
the MIN mark on the dipstick. See 160 for
volumes.
The oil level must be within the area
marked on the dipstick.
Important!
Always use oil of the recommended grade
and correct viscosity.
Never use oil additives. These can damage
the engine.
If the system is topped up with a different
oil, contact the nearest Volvo workshop for
servicing.
WARNING!
Do not spill oil onto the hot exhaust manifold
due to the risk of fire.
Important!
Never fill above the MAX mark. Oil
consumption may increase if too much oil
is poured into the engine.
147
Coolant
Checking and topping up coolant
Follow the instructions on the packaging when topping up coolant.
It is important that the mixture of coolant concentrate and water is correct
for the prevailing weather conditions.Never top up with water only.
The risk of freezing increases with both too little and too much coolant
concentrate.
See capacities and recommended grade for fluids and oils on page 158.
Important!
Always use coolant with anti-corrosion agent as recommended by
Volvo.
New cars are filled with coolant that can withstand temperatures
down to approximately -35 °C.
Check the coolant regularly
The level should lie between the MIN and MAX marks on the
expansion tank.
Top up with fluid when the level has fallen to the MIN mark.
Important!
The engine must only be run with a well-filled cooling system.
High temperatures can occur, causing a risk of damage (cracks) to the
cylinder head.
WARNING!
The coolant may be very hot. If the coolant requires topping up
when the engine is at operating temperature, unscrew the expansion
tank cap slowly to gently release the overpressure.
148
Brake fluid, Power steering, Windscreen washer fluid
Washer fluid reservoir
The wipers for the windscreen and headlamps
share the same fluid reservoir.See capacities and
recommended grade for fluids and oils on
page 158.
Use washer fluid during the winter so that the
fluid does not freeze in the pump, reservoir
and hoses.
Tip: clean the wiper blades when topping up
washer fluid.
3601948d
Washer fluid reservoir
Clutch and brake fluid reservoir
The brake and clutch fluid have a common
reservoir
1
. The fluid level must be between the
MIN and MAX marks. Check the level
regularly. Change the brake fluid every other
year or at every other regular service.
See capacities and recommended grade for
fluids and oils on page 158.
NOTE! The fluid should be changed annually
on cars which drive in conditions requiring
hard and frequent braking, driving in mountains
or tropical climates with high humidity.
1
Location dependent on whether car is left or
right-hand drive.
5200678d
ADD
FULL
Power steering fluid reservoir
Check the level at every service. It is not
necessary to change the fluid. The level should
lie between the ADD and FULL marks.
See capacities and recommended grade for
fluids and oils on page 158.
NOTE! If a fault occurs in the power steering
(or if the car has no power and is to be towed)
the car can still be steered. Remember that the
steering will be much heavier than normal and
more strength is required to turn the steering
wheel.
Power steering fluid reservoir
Clutch and brake fluid
reservoir
WARNING!
If the level of brake fluid in the reser-
voir is below the MIN mark, the car
should not be driven until the brake flu-
id has been topped up. The reason for
the loss of brake fluid must be investi-
gated.
149
Battery care
· Check all battery cells. Use a screwdriver to
remove the caps. Each cell has its own max-
imum level mark.
· If necessary, top up with distilled water to
the batterys maximum mark.
· Never fill above the maximum mark (A).
Important!
Always use distilled or deionised water (battery
· Tighten the caps properly.
NOTE! The life of the battery is shortened if it
becomes discharged repeatedly.
Battery care
The service life and function of the battery is
influenced by factors such as the number of
starts, discharging, driving style, driving
conditions and climatic conditions.
Repeated use of the parking heater and other
great power consumers in combination with
short trips can lead to battery discharge and
thereby difficulty starting.
For the battery to function satisfactorily,
consider the following:
· Regularly check that the battery fluid level
is correct (A).
WARNING!
Batteries can generate oxyhydrogen gas,
which is highly explosive.
One spark, which can be generated if you
connect the jump leads incorrectly, is suf-
ficient to make the battery explode.
The battery contains sulphuric acid, which
can cause serious burns.
If the acid comes into contact with eyes,
skin or clothing, flush with large quanti-
ties of water.
If acid splashes into the eyes, seek medical
attention immediately.
3100063d
A
Symbols:
Use protective goggles.
Further information in the
owners manual.
Store the battery out of the
reach of children.
The battery contains
corrosive acid.
Avoid sparks and open
flames.
Risk of explosion.
150
3100181
Battery care
A
B
A. Battery without cover
B. Battery with cover
Replacing the battery
Removing the battery:
· Switch off the ignition and remove the key.
· Wait at least 5 minutes before touching any
electrical terminals. This allows time for the
information in the cars electrical system to
be stored in the control modules.
· Undo the screws from the lock brace over
the battery and remove the brace.
· Bend up the plastic cover over the negative
battery terminal or unscrew the cover from
the battery.
· Disconnect the negative battery cable.
· Detach the lower console holding the
battery.
· Bend aside the plastic cover and disconnect
the positive cable.
· Remove the battery.
Fitting the battery:
· Position the lower console and screw it in
place.
· Position the lower console and screw it in
place.
· Connect the positive cable, press in and fold
· Connect the negative cable, fold down the
plastic cover.
· Fit the plastic cover or the cover over the
battery.
· Make sure the evacuation hose is correctly
connected to both the battery and the outlet
in the bodywork.
· Fit the lock brace over the battery and
tighten the screws.
WARNING!
Batteries can generate oxyhydrogen gas,
which is very dangerous. One spark,
which can be generated if you connect
the jump leads incorrectly, is sufficient to
make the battery explode. The battery
contains sulphuric acid, which can cause
serious burns. If the acid comes into
contact with eyes, skin or clothing, flush
with large quantities of water. If acid
splashes into the eyes, seek medical
attention immediately.
151
Replacing wiper blades
Replacing windscreen wiper
blades
Fold out the wiper arm and hold the wiper
blade.
Push in the ribbed locking springs on the
wiper blade while lifting it from the arm ex-
tension.
Install the new blade following the instruc-
tions in reverse order and check that the
blade is properly secured.
NOTE! Keep in mind that the wiper blade on
the driver's side is longer than the blade on the
passenger side.
3603056d
152
153
Specifications
Type designation 154
Dimensions and weights 155
Engine specifications 156
Capacities 158
Fuel 161
Catalytic converter and suspension 163
Electrical system 164
154
Specifications
INJAPAN
SERIALNO
AISIN
MADE
AW CO
LTD
4
a
T100001
P1208632
4
b
3,77
M56L
1234567
YV1LS5502N2000327
1
3
c
4
2
0300169d
VOLVOCARCORP.
1.
2.
KG
KG
KG
KG
SWEDEN
MADEIN
50-42LE
B5254S
Type designation
When contacting your Volvo dealer about your
car and when ordering spare parts and accesso-
ries, it makes things easier if you know your
cars type designation, vehicle identification
number and engine number.
1 Type, model year designation and vehicle
identification number
Stamped in the engine compartment beneath
the windscreen.
2 Type designation, vehicle identification
number, permitted weights and codes
for paint and upholstery and type
approval number.
Plate on the wing liner behind the left-hand
headlamp.
3 Engine type designation, component
and serial number
On the top side of the cylinder block.
4 Gearbox type designation, and serial
number
a: Manual gearbox: on the front side
b: Automatic gearbox (AW55-50): on the upper
side
c: Automatic gearbox (GM4T65EV): on the
rear side
5 The engine decal* specifies oil grade and
viscosity (located on lower edge of bonnet).
* Certain engine variants
155
0300047A
KG
KG
KG
1.
KG2.
VOLVO CAR CORP.
SWEDEN
MADE IN
1
2
3
4
Weights
The kerb weight includes the driver, the fuel tank 90% full and all fluids.
The weight of passengers and accessories, such as a towbar, towball load
(when a trailer is hitched, see table), load carriers, and roof box, affect
load capacity and must not be included in the kerb weight.
Permitted weight (in addition to driver) = Gross vehicle weight - Kerb
weight. For the location of the decal, see page 154.
1. Max. total weight
2. Max. train weight (car+trailer)
3. Max. front axle load
4. Max rear axle load Max load
Max load: see registration papers
Max roof load ................................................................................ 100 kg
Maximum trailer weight .............................................................. 1800 kg
W arning!
The driving characteristics of the car change depending on how
heavily it is loaded and how the load is distributed.
Dimensions and weights
Measurements
Length ................................................................ 482 cm
Width ................................................................. 183 cm
Height ................................................................ 145 cm
Wheelbase .......................................................... 279 cm
Front track ......................................................... 158 cm
Rear track ........................................................... 156 cm
156
Engine specifications
2.0T BIFUEL BIFUEL 2.4 2.4 2.5T 2.4T
CNG LPG
Engine variant B5204T5 B5244SG B5244SG2 B5244S B5244S2 B5254T2 B5244T4
a
Output* (kW/rps) 132/92 103/97 103/85 125/98 103/75 154/83 162/83
AWD - - - - - - -
(hp/rpm) 180/5500 140/5800 140/5100 170/6000 140/4500 210/5000 220/5000
AWD - - - - - - -
Torque* (Nm/rps) 240/30-83 192/75 214/75 225/75 220/55 320/25-75 285/33-83
AWD - - - - - - -
(kpm/rpm) 24.5/1850-5000 19.6/4500 21.8/4500 23.0/4500 22.5/3300 32.6/1500-4500 35.7/2100-4000
AWD - - - - - - -
No. of cylinders 5 5 5 5 5 5 5
Bore (mm) 81 83 83 83 83 83 83
Stroke (mm) 77 90 90 90 90 93,2 90
Cylinder displacement (dm
3
(l)) 1.98 2.44 2.44 2.44 2.44 2.52 2.44
Compression ratio 9.5:1 10.3:1 10.3:1 10.3:1 10.3:1 9.0:1 8.5:1
Spark plugs:
Electrode gap (mm) 0.7 1.2 1.2 1.2 1.2 0.7 0.7
Tightening torque (Nm) 28 30 30 30 30 30 28
a
Thailand, Malaysia
* Output and torque as per test standard EU 80/1269. For petrol engines, 98 octane is always used for this test.
To verify the type of engine in the car - see the type designation stamped into the engine compartment (Type designations - page 154, point 3).
157
Engine specifications
T6 2.9 D5 2.4D
Engine variant B6294T B6294S2 D5244T D5244T2
Output* (kW/rps) 200/87 144/87 120/67 96/67
AWD----
(hp/rpm) 272/5200 196/5200 163/4000 130/4000
AWD - - - -
Torque (Nm/rps) 380/30-83 280/65 340/29-50 280/29-50
AWD - - - -
(kpm/rpm) 38.8/1800-5000 28.6/3900 34.7/1750-3000 28.6/1750-3000
AWD - - - -
No. of cylinders 6 6 5 5
Bore (mm) 83 83 81 81
Stroke (mm) 90 90 93.2 93.2
Cylinder displacement (dm
3
(l)) 2.92 2.92 2.40 2.40
Compression ratio 8.5:1 10.3:1 18.0:1 18.0:1
Spark plugs:
Electrode gap (mm) 0.7 3x1.2 - -
Tightening torque (Nm) 30 25 - -
* Output and torque as per test standard EU 80/1269. For petrol engines, 98 octane is always used for this test.
To verify the type of engine in the car - see the type designation stamped into the engine compartment (Type designations - page 154, point 3).
158
Capacities
Volume Recommended grade
Transmission fluid Manual, 5-speed (M56/M58) 2.1 litres Transmission fluid
1
: MTF 97309
Manual, 6-speed (M66) 2.0 litres
Automatic gearbox (AW55-51) 7.2 litres Transmission fluid
1
: JWS 3309
Coolant Petrol engines without turbo 8.0 litres Coolant with corrosion protection mixed with water, see packaging.
Petrol engines with turbo 9.0 litres The thermostat starts opening at 90 ºC in petrol engines and at 82 ºC
Diesel engines 12.5 litres diesel engines.
Air conditioning Compressor oil 180-200 gram
2
PAG
Refrigerant 500-600 gram
2
R134a (HFC134a)
Brake fluid 0.6 litres DOT 4+
Power steering System: 0.9 litres Power steering fluid: WSS M2C204-A or equivalent product with
same of which reservoir 0.2 litres specifications.
Washer fluid reservoir Variant with headlamp wipers 4.5 litres Use a washer anti-freeze recommended by Volvo mixed with water
high pressure wash 6.4 litres at temperatures below freezing.
Fuel tank For tank volume, see Fuel section on page 161.
1
The recommended transmission fluid must be used to prevent damage to the gearbox. Do not mix with any other transmission fluid. If the
transmission is topped up with a different fluid, contact an authorised Volvo workshop for servicing.
2
Weights can vary depending on the engine variant. Contact an authorised Volvo workshop for the exact information.
Other fluids and lubricants
159
The oil grade requirement must be fulfilled even
if a different viscosity is chosen.
Engine variant Volume between Volume
1
/ litre Recommended Viscosity
2
MIN-MAX oil grade:
2.0T B5204T5 0-1.2 5.5 If there is an engine oil decal on ACEA A5/B5 SAE 0W-30
2.4 B5244S 0-1.2 the bonnet, the volume and
2.4 B5244S2 0-1.2 grade specifications in this table
2.4T B5244T4 0-1.2 apply. See location on page 154.
2.5T B5254T2 0-1.2
1
Including filter change
2
The oil grade requirement must be fulfilled even if a different viscosity is chosen according to the diagram.
Engine oil
Engine decal
The engine decal specifies:
1. oil grade
2. viscosity
Important!
Always use oil of the recommended grade
and correct viscosity.
Never use oil additives. These can damage
the engine.
If the system is topped up with a different oil,
contact the nearest Volvo workshop for
servicing.
Using oil of a different grade than recom-
mended by Volvo could generate increased
wear and engine damaged that is not covered
by the Volvo warranty.
Capacities
2200293
v
160
Capacities
1
Including filter change.
2
If a different viscosity than that listed in this table is selected following the information in the diagram,
the engine grade requirement must be fulfilled.
Extreme driving conditions
Check the oil more often if the car is driven under extreme
conditions, such as driving in mountains with a lot of
engine braking or on motorways at high speed. There may
be abnormally high oil temperatures or oil consumption.
Petrol engines: Under extreme operating conditions,
choose a fully synthetic engine oil that provides extra
protection for the engine.
Volvo recommends Castrol® oil products.
Engine oil
Engine variant Volume between Volume
1
/ litre Recommended Viscosity
2
MIN-MAX oil grade
2.0T B5204T5 0-1.2 5.8 ACEA A1/B1 SAE 5W-30
2.4 B5244S 0-1.2
2.4 B5244S2 0-1.2
2.4T B5244T4 0-1.2
2,5T B5254T2 0-1.2
T6 B6294T 0-1.5
2,9 B6294S2 0-1.5 6.6
BIFUEL B5244SG 0-1.2 5.8 SAE 0W-30
BIFUEL B5244SG2 0-1.2
D5 D5244T 0 - 2.0 6.5 ACEA A3/B3/B4 SAE 0W-30
2.4D D5244T2 0 - 2.0
The oil grade, viscosity and
volume specified in this table is
to be followed if the car has an
engine oil decal on the bonnet;
see page 154 for location.
161
Fuel
1
Emission values are affected by fuel quality and may therefore differ from those specified if fuel of a different standard than that
recommended by Volvo is used.
2
Certain countries.
3
Fuel tank.
Engine variant Gearbox Consumption Carbon dioxide Tank volume
(litres/100 km)
1
emissions (g/km) (litres)
2.4 B5244S2 Manual 5-speed (M56) 8.9 212 70
Automatic gearbox (AW55-51) 9.6 229
2.4 B5244S Manual 5-speed (M56) 9.0 214 70
Automatic gearbox (AW55-51) 9.7 232
2.0T B5204T5 Manual 5-speed (M56) 9.0 214 80
Automatic gearbox (AW55-51) 9.8 234
2.5T B5254T2 Manual 5-speed (M56) 9.2 219 80
Automatic gearbox (AW55-51) 10.0 239
AWD Automatic gearbox (AW55-51) 10.5 252 72
2.4 B5244SG Bi-Fuel Manual 5-speed (M56) 9.2 220 30
3
Automatic gearbox (AW55-50) 9.9 242
2.4 B5244SG2 Bi-Fuel Manual 5-speed (M56) 8.8 211 30
3
Automatic gearbox (AW55-50) 10.0 240
D5 D5244T Manual 5-speed (M56) 6.5 172 70
Automatic gearbox (AW55-50) 7.7 204 70
2.4D D5244T2 Manual 5-speed (M56) 6.5 171 70
Automatic gearbox (AW55-50) 7.7 204
2.9 B6294T Geartronic 11.1 268 80
4-speed (GM4T65)
2.9 B6294S2 Geartronic 10.6 255 80
4-speed (GM4T65)
2.4T B5244T4
2
Automatic gearbox (AW55-51) - - 70
Fuel consumption, emissions and volume
162
Fuel
Specified fuel consumption
Official fuel consumption figures are based on
a standard driving cycle in accordance with EU
Directive 80/1268 comb.
Fuel consumption figures may be altered if the
car is equipped with extra equipment that
affects the cars weight.
The manner in which the car is driven and other
non-technical factors can also affect fuel
consumption.
Consumption is higher and power output lower
when driving using fuel with an octane rating
of 91 RON.
Important!
Refuel with correct petrol!
Your car has a catalytic converter. Only drive
with unleaded petrol so as not to damage the
catalytic converter.
Recommended fuel grade
Petrol
The engine can be run with octane ratings of
91, 95 and 98 RON.
When driving in temperatures above +38 ºC,
use of fuel with the highest possible octane
rating is recommended for optimum performan-
ce and fuel economy.
· 98 RON is recommended for maximum
effect and minimum fuel consumption.
· 95 RON can be used for normal driving.
· 91 RON must not be used in 4-cylinder
engines and, in general, should only be used
as an exception. However, the engine will
not be damaged by this fuel grade.
Petrol: Standard EN 228
Important!
Diesel fuels not to be used: special additives,
Marine Diesel Fuel, fuel oil, RME (Rape
Methyl Ester), vegetable oil.
These fuels do not fulfil the requirements of
EM 590 and generate increased wear and
engine damage that is not covered by the
Volvo warranty.
Diesel
Diesel: Standard EN 590
JIS K2204 or similar
163
Catalytic converter and suspension
Catalytic converter
The purpose of the catalytic converter is to
purify exhaust.
It is located in the exhaust flow near the engine
to quickly reach operating temperature.
The catalytic converter consists of a monolith
(ceramic or metal) with channels.
The channel walls are coated with a thin layer
of platinum, rhodium and palladium.
The metals act as catalysts, i.e. they accelerate
the chemical process without being used up
themselves.
2501523
Lambda-sond
TM
Heated oxygen sensor
The lambda sensor is part of a management
system intended to reduce emissions and
improve fuel economy. An oxygen sensor
monitors the oxygen content of the exhaust
gases leaving the engine. These values are fed
into an electronic system that continuously
controls the injectors. The ratio of air to fuel is
continuously adjusted. These adjustments create
optimal conditions for efficient combustion, and
together with the three-way catalytic converter
reduce harmful emissions (hydrocarbons,
carbon monoxide and nitrous oxides).
Wheel suspension, springing
Front end
McPherson type spring strut. Unitary construc-
tion of shock absorbers and spring. Rack and
pinion steering. Safety type steering shaft. The
values apply to an unladen car with full tank,
coolant and spare wheel.
Rear suspension
Independent suspension with individually
sprung wheels with shock absorbers. The
suspension consists of rear-facing trailer arms,
upper and lower control arms, track rods and
anti-roll bar.
164
Electrical system
General
12-volt system with voltage regulated alterna-
ting current generator. Single pole system in
which the chassis and engine block are used as
conductors.The negative pole is connected to
the chassis. The car is equipped with an extra
ground lead to reduce the magnetic fields.
Battery
Voltage 12 V 12 V 12V
Cold start capacity 520 A 600 A 800 A*
(CCA)
Reserve capacity (RC) 100 120 170
min min min
* Cars equipped with diesel and parking heater.
If the battery is changed, replace it with a
battery of the same cold start capacity and
reserve capacity as the original
(see the decal on the battery).
Generator max current 140 A
Starter motor, power 1,4/1,7/2,2 kW
Bulbs
Bulbs Type (LL) Socket
Bulbs Type (LL) Socket
3501808d
1234 5
67 9810
11
1. Main beam /
dipped beam H7 55W
2. Bi-Xenon D2R35W
3. Front fog lamp H1 55W
4. Parking lamp (front),
side marker lamp
(rear) W5W W2.1x9.5d
4. Side marker lamp
(front) W3W W2.1x9.5d
5. Direction
indicator (front) PY21W BAU 15s
6. Direction
indicator (side) WY5W W2.1x9.5d
7. Reversing lamp,
direction indicator
(rear) P21W BA15s
8. Rear fog lamp,
parking lamp (rear) P21/4W BAZ15d
9. Rear parking lamp R5W BA15s
10. Numberplate
lighting, courtesy
lighting (front) cargo
compartment lighting C5W SV8.5
11. Vanity mirror 1.2W SV5.5
4. Courtesy lighting
(rear) W5W W2.1x9.5d
165
Audio
Overview, Stereo HU-450 166
Overview, Stereo HU-650 167
Overview, Stereo HU-850 168
Audio functions 169
Radio functions 171
Cassette player 178
CD player 179
Dolby Surround Pro Logic II 182
Technical data - Audio 184
166
Stereo HU-450
7. Navigation buttons -
CD/radio - seek/change station or
track Cassette - Fast forward/rewind,
select next/previous track
8. Display
9. FM - Shortcut
10. AM - Shortcut
11. TAPE - Shortcut
12. AUTO - Automatic preset of radio stations
13. BASS - Press out and turn
TREBLE - Press out, pull and turn
14. Cassette - Direction select
CD changer
(option) - Random
15. Cassette opening
16. Cassette opening
1. POWER (Off/On) - Press Volume -
Turn
2. PRESET/ CD PUSH MENU -
Stored radio stations
CD changer (option)
3. SOURCE PUSH MENU -
Open the main menu -
Press Turn to select: Radio -
FM, AM Cassette
CD changer (option)
4. FADER - Press out and turn
BALANCE - Press out, pull and turn
5. SCAN - Automatic station search
6. EXIT - Scroll back in the menu
HU-450
3905005d
167
Stereo HU-650
1. POWER (Off/On) - PressVolume - Turn
2. PRESET/ CD PUSH MENU -
Stored radio stations
CD changer (option)
3. SOURCE PUSH MENU - Open the
main menu - Press Turn to select:
Radio - FM, AM
Cassette
CD
CD changer (option)
4. FADER - Press out and turn
BALANCE - Press out, pull and turn
5. EXIT - Scroll back in the menu
6. SCAN - Automatic station search
7. Navigation buttons - seek/change
station or track
3905004d
HU-650
DIGITALAUDIO
COMPACT
8. CD eject
9. CD slot
10. CD random
11. FM - Shortcut
12. AM - Shortcut
13. CD - Shortcut
14. AUTO - Automatic preset of radiostations
15. BASS - Press out and turn
TREBLE - Press out, pull and turn
16. Cassette - Direction select
CD changer (option) - Random
17. Cassette opening
18. Cassette eject
168
Stereo HU-850
1. POWER (Off/On) - Press
VOLUME - Turn
2. BASS - Press out and turn
TREBLE - Press out, pull and turn
3. FADER - Press out and turn
BALANCE - Press out, pull and turn
4. Centre volume - Press out and turn
Output level - Press out, pull and turn
5. PRESET/ CD PUSH MENU -
Stored radio stations
CD changer (option)
6. SOURCE PUSH MENU -
Open the main menu - Press
Turn to select:
Radio - FM, AM
CD
CD changer (option)
7. EXIT - Scroll back in the menu
8. SCAN - Automatic station search
9. Navigation buttons - seek/change station
or track
10. CD eject
11. Dolby Pro Logic II
12. 2-channel stereo
13. 3-channel stereo
14. CD slot
15. CD random
16. AM - Shortcut
17. FM - Shortcut
18. CD - Shortcut
19. AUTO - Automatic preset of radio
stations
20. Display
HU-850
DIGITALAUDIO
COMPACT
3905006d
169
Audio functions HU-450/650/850
3902418d
Bass
Set the bass by pressing out the button and
turning to right or left. In the centre position the
volume is “normalised”. Press the button back
to original position after setting.
Treble
Set the treble by pressing out the button, pull it
further out and turn it left or right. In the centre
position the volume is “normalised”. Press the
button back to original position after setting.
3901856d
On/Off switch
Press button to switch the radio on or off.
Volume control
Turn the knob clockwise to increase volume.
Volume control is electronic and does not have
an end stop. If you have a keypad in the
steering wheel, increase or decrease volume
with the + or - buttons.
Volume control - TP/PTY/
NEWS
If a cassette or a CD is playing when the radio
receives traffic information, news, or a selected
programme type, the function is interrupted,
and the message will be heard
at the pre-set volume for traffic information,
news or programme type. Volume is adjusted
with the volume control.
The unit will thereafter return to the previously
set volume and continue playing the cassette or
the CD.
170
3901858d
Audio functions HU-450/650/850
Fader  Balance front/rear
Set a suitable balance between the front and rear
loudspeakers by pressing out the button and
then turning it to the right (sound to front) or to
the left (sound to the rear). Centre position
means that the balance is “normalised”. Press
the button back to its original position after
setting.
3905008m
3905063m3905009m
Balance  Balance right/left
Set the balance by pressing, pulling out the
button and turning to right or left. In the centre
position the volume is “normalised”. Press the
button back to its original position after setting.
Selection of sound source
There are two ways to select sound source:
Either with the shortcut keys (AM, FM
CD (HU-650/850), TAPE (HU-450)) or with
the SOURCE knob.
Turn the SOURCE knob to select FM or AM.
This knob can also be used to select
cassette (HU-450/650), CD (HU-650/850) or
CD changer (option) if connected.
The selected sound source is shown in the
display.
171
Radio functions HU-450/650/850
Steering wheel keypad
If you have a keypad in the steering wheel,
press the right or left arrow to select preset
stations.
NOTE! If the car is equipped with an
integrated telephone, the steering wheel
keypad can only be used for telephone
functions when the telephone is activated.
When in active mode, telephone information
is always shown in the display. Deactivate
the telephone by pressing
.
Switch off the telephone if you do not have an
SIM card. See page 184.
3901873d
Station search
Press or to seek lower or higher
frequencies. The radio searches for the next
audible station and then stops.
Press the button again to continue the search.
Manual tuning
Press and hold or . MAN is shown on the
display. The radio slowly scrolls in the desired
direction, increasing its tempo after a few
seconds. Release the button when the desired
frequency shows in the display.
The frequency can then be adjusted by briefly
pressing one of the arrow keys
or .
Manual adjustment mode stays in effect five
seconds after the last press.
Scanning
Press the SCAN button to start the search.
When the radio finds a station, it stops scanning
for a 10 seconds. It then resumes scanning.
To listen to the station, press the SCAN or
EXIT button.
3905010m
172
Radio functions HU-450/650/850
Programming stations
1. Set the desired frequency.
2. Briefly press the PRESET/CD knob.
Select a number by turning forwards or
backwards. Press again to store the desired
frequency and station.
Preset
To select a preset radio programme, turn the
PRESET/CD to the stored number. The set
programme is displayed.
3905009m
3905007d
Autostoring stations
This function automatically seeks and stores up
to 10 strong AM or FM stations in a separate
memory. The function is especially useful in
areas in which you are unfamiliar with the radio
stations or their frequencies.
1. Select radio mode using the AM or FM
button.
2. Start the search by pressing and holding
AUTO (more than 2 seconds).
3 AUTO is shown on the display and a
number of strong stations (max. 10) from
the set frequency band are saved in the
autostore memory.
If there are no stations with sufficient signal
strength, NO STATION is displayed.
4. Briefly press the AUTO button or one of
the arrows of the steering wheel keypad to
scroll to another of the automatically preset
stations.
AUTO is shown on the display when the radio
is in autostore mode.
The text disappears when you return to
ordinary radio mode.
Return to ordinary radio mode by pressing
FM, AM or EXIT or by turning the
PRESET/CD-knob.
Returning to autostore mode:
Briefly press AUTO.
3901873d
173
Radio functions HU-450/650/850
Radio Data System - RDS
RDS is a system that links specific network
transmitters. It is used, for example, to tune the
correct frequency of a station irrespective of the
transmitter or the active sound source
(e.g. CD). The system can also be used for
receiving traffic information and for finding
broadcasts of a specific type.
Radio text is also a component of RDS. A radio
station can transmit information about the radio
programme currently being broadcast.
Some radio stations do not use RDS or only
use a limited range of its features.
PI search (automatic station
search)
When listening to an RDS transmitter, various
information, such as traffic information, is
stored in the radio.
When a preset RDS transmitter is later selected,
the radio updates the transmitters RDS
information. If the radio is at the boundary or
just outside of the transmitters range, the radio
automatically seeks the strongest possible
transmitter of that channel.
If there is no audible transmitter, the radio
quiets and the PI SEEK appears on the display
until the station is found.
Traffic information - TP
Station
Traffic information from RDS stations
interrupts other sound sources. The message is
heard at the volume set for this specific feature.
As soon as the message ends, the audio system
returns to the previous sound source and
volume setting.
Activating traffic information:
1. Select radio mode using the FM button and
press SOURCE.
2. Select TP and press SOURCE.
3. Turn SOURCE, select TP ON (flashing
text) and press SOURCE.
4. Press EXIT.
Deactivating TP
1. Select radio mode using the FM button and
press SOURCE.
2. Select TP and press SOURCE.
3. Turn SOURCE, select TP OFF (flashing
text) and press SOURCE.
4. Press EXIT.
TP is shown on the display when the function
is activated.
Press EXIT if you do not wish to listen to a
traffic bulletin.
The TP function remains active and the radio
waits for the next traffic bulletin.
Activate traffic information from a special
channel:
1. Select radio mode using the FM button.
2. Activate the station from which traffic
information is to be received.
3. Press SOURCE.
4. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
5. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
6. Turn SOURCE, select TP STATION and
press SOURCE.
7. Turn SOURCE, select SET CURRENT and
press SOURCE.
8. Press EXIT.
Deactivating TP Station
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
4. Turn SOURCE, select TP STATION and
press SOURCE.
5. Turn SOURCE, select TP STATION OFF
and press SOURCE.
6. Press EXIT.
174
Activating News:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select NEWS and press
SOURCE.
3. Turn SOURCE, select NEWS ON (flashing
text) and press SOURCE.
4. Press EXIT.
NEWS appears on the display.
To deactivate News:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select NEWS and press
SOURCE.
3. Turn SOURCE, select NEWS OFF
(flashing text) and press SOURCE.
4. Press EXIT.
NEWS disappears from the display.
Press EXIT if you do not wish to listen to a
news broadcast.
The News function remains active and the radio
waits for the next news programme.
TP search
This function allows you to listen to traffic
information when travelling between different
areas and countries without selecting a station.
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
4. Turn SOURCE, select TP SEARCH and
press SOURCE.
5. Turn SOURCE, select TP SEARCH ON or
TP SEARCH OFF (flashing text) and press
SOURCE.
6. Press EXIT.
News
Messages with a programme code (such as
news from RDS stations) will interrupt other
sound sources at the volume set for this specific
feature.
As soon as the news broadcast is finished, the
audio system returns to the previous sound
source and volume setting.
Radio functions HU-450/650/850
Setting the current station as news source:
1. Select radio mode using the FM button.
2. Activate the station from which traffic
information is to be received.
3. Press SOURCE.
4. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
5. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
6. Turn SOURCE, select NEWS STATION
and press SOURCE.
7. Turn SOURCE, select SET CURRENT
and press SOURCE.
8. Press EXIT.
To deactivate News Station:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
4. Turn SOURCE, select NEWS STATION
and press SOURCE.
5. Turn SOURCE, select NEWS STN OFF
and press SOURCE.
6. Press EXIT.
175
Programme types Displayed
OFF PTY OFF
New features New features
Current affairs Current
Information Info
Sport Sport
Education Educ
Theatre Theater
Culture and Art Culture
Science Science
Entertainment Enterta
Pop music Pop
Rock music Rock
Easy listening Easy list
Light classical L Class
Classical music Classical
Other music Other M
Weather Weather
Economy Economy
For children For children
Social questions Social
Spiritual questions Spiritual
Telephone watch Telephone
Travel and holiday Travel
Leisure and hobby Leisure
Jazz music Jazz
Country music Country
National music Nation M
Golden oldies “Oldies”
Folk music Folk
Documentary Document
Radio functions HU-450/650/850
Programme type - PTY
Use the PTY function to select between the
various programme types
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select PTY and press
SOURCE.
3. Turn SOURCE, select PTY in the menu and
press SOURCE.
4. The radio begins searching for the selected
programme type.
5. If you do not wish to listen to the station
found by the radio, continue the search
using the left or right arrow key.
6. If the radio does not find a station with the
selected programme type, it returns to the
previous frequency.
Not all radio stations have a PTY designation
PTY standby
PTY mode is then in standby until the selected
programme type is broadcast. When this
happens, the radio automatically switches to the
station broadcasting the selected programme
type.
Deactivating:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select PTY and press
SOURCE.
3. Turn SOURCE, select PTY OFF and press
SOURCE.
4. Press EXIT.
The PTY symbol disappears from the display
and the radio resumes normal mode.
PTY - language
The PTY function can be used to select the
language used in the radio display (English,
German, French or Swedish).
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
and press SOURCE.
4. Turn SOURCE, select PTY LANGUAGE
and press SOURCE.
5. Turn SOURCE, select language and press
SOURCE.
6. Press EXIT.
176
Automatic frequency
updating
The AF function is normally activate and
ensures that the radio tunes to the strongest
available transmitter.
Activating AF:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select AF ON (flashing
text) and press SOURCE.
5. Press EXIT.
Deactivating AF:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select AF OFF (flashing
text) and press SOURCE.
5. Press EXIT.
EON - Local/Distant
(Enhanced Other Networks)
When EON is activated, the radio programme is
interrupted for traffic bulletins, news broadcasts
or the like from other channels.
The function has two levels:
Local - only interrupts if the signal is
strong.
Distant - also interrupts with weaker
signals.
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select EON (flashing text)
and press SOURCE.
5. Turn SOURCE, select Local or Distant and
press SOURCE.
6. Press EXIT.
Regional radio programmes
The regional function is normally deactivated.
When the function is activated you can continue
listening to a regional broadcast even if the
signal is weak.
Activating REG:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select REG LOCK
(flashing text) and press SOURCE.
5.Press EXIT.
REG appears on the display.
Deactivating REG:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RADIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select REG SWITCH
(flashing text) and press SOURCE
5. Press EXIT.
Radio functions HU-450/650/850
177
Radio functions HU-450/650/850
Resetting RDS functions
Resets all radio settings to the original factory
settings.
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select RESET TO DE-
FAULT and press SOURCE.
4. Press EXIT.
ASC (Active Sound Control)
The ASC function automatically adapts the
volume of the radio to vehicle speed.
Activating ASC:
1. Select radio mode using the FM button and
press SOURCE.
2. Turn SOURCE, select ADVANCED
MENU and press SOURCE.
3. Turn SOURCE, select AUDIO SETTINGS
MENU and press SOURCE.
4. Turn SOURCE, select ASC LEVEL and
press SOURCE.
5. Turn SOURCE select LOW, MEDIUM,
HIGH or Off and press SOURCE.
Radio text
Some RDS stations broadcast information,
such as about programme content and artists.
Hold the FM button depressed a few seconds
to access any transmitted radio text, which then
appears on the display.
After the text is shown twice, the radio once
again displays the station/frequency.
A brief press on the FM button ends radio text
display.
178
Cassette player HU-450/650
Cassette eject
If you press the button, the tape stops and the
cassette is ejected. Turn the SOURCE knob to
select a new programme source. The cassette
can be inserted or ejected even if the system is
switched off.
Dolby B Noise Reduction
This function is preset. Do as follows to switch
it off: hold the REV button depressed until the
Dolby symbol
in the display goes out. Press
the same button again to reactivate the Dolby
function.
Scanning
Scan plays the first ten seconds of each track.
Press the SCAN or EXIT button when you
find a song or track you wish to listen to.
Fast forward/rewind
The tape is fast forwarded by pressing and
holding the
button and is rewound with the
button
. ”FF” (fast forward) or ”REW”
(rewind) is shown in the display during this
time. Fast forward/rewind is interrupted if you
press the button again.
Next track, Previous track
If you press the button, the cassette will
automatically fast forward to the next song.
If you press the button, the cassette will
automatically rewind to the previous
song.There must be a five second break
between each track for this function to work. If
you have a keypad in the steering wheel, you
can use the arrows.
Cassette opening
Slide cassette into the cassette opening with the
tape to the right. TAPE Side A is shown in the
display. When one side has finished playing the
system will automatically begin playing the
other side (auto reverse). To play a cassette that
is already in the player, turn the SOURCE knob
or press the TAPE shortcut key (HU-450).
Changing tape direction
Press the REV button to if you wish to play
the other side of the tape. The display shows
which side is being played.
3901876d
3901857d
DOLBYBNR
3901873d
3905010m
179
CD player HU- 650
CD player
Insert a CD. If there is already a CD in the
player, activate it by turning the SOURCE knob
or pressing the CD shortcut key.
CD eject
If you press this button the CD stops playing
and the disc is ejected. (See illustration above)
NOTE! For reasons of traffic safety, you have
twelve seconds to handle the ejected disc.
Otherwise, the CD is drawn back into the player
and resumes with the most recently played
track.
Random
Press RND to connect the random function.
The unit plays tracks from the disc in random
order. “RND” (random) is displayed as long as
the function is activated.
NOTE! If the quality of the CD does not comply
with the standard EN60908, or if it has been
recorded using poor equipment, sound quality
may be poor or playback interrupted.
Fast forward/rewind
Press and hold or to search within a
track or the entire disc. The search continues as
long as the button is depressed.
Changing tracks
Press or to come to the previous or next
track. The track number is shown on the
display.
The steering wheel keypad can also be used
for this.
Scanning
Scan plays the first ten seconds of each track.
Press the SCAN or EXIT button when you
find a song or track you wish to listen to.
IMPORTANT!
Use only standard 12 cm CDs - no smaller.
Do not use CDs with a sticker label.
Heat from the CD player could cause the
label to let loose from the disc, possibly
damaging the CD player.
3901862d
3901873d
3905010m
180
External CD changer
CD changer
The external CD changer (option) is mounted
behind the panel on the rear left side of the
cargo compartment.
Turn the SOURCE knob to activate CD
changer mode. The CD changer resumes
playing the disc and track that was playing last.
If the CD changer magazine is empty
“LOAD CARTRIDGE” is displayed.
Loading discs in the CD changer:
1. Slide open the CD changer cover.
2. Press the cartridge eject button on the
changer.
3. Pull out the CD cartridge and insert the
discs.
4. Reinsert the cartridge in the CD changer.
Selecting disc number
Turn the PRESET/CD knob. The numbers of
the disc and the track are shown in the display.
Fast forward
Press and hold or to search within a track
or the entire disc.
The search continues as long as the button is
depressed.
Changing tracks
Press or to come to the previous or next
track. The track number is shown on the
display.
The steering wheel keypad can also be used for
this.
Scanning
Scan plays the first ten seconds of each track.
Press the SCAN or EXIT button when you find
a song or track you wish to listen to.
IMPORTANT!
Use only standard 12 cm CDs - no smaller.
Do not use CDs with a sticker label.
Heat from the CD player could cause the
label to let loose from the disc,
possibly damaging the CD player.
Random
Press RND (for HU-650 and 850) to activate
the Random function.
If you have audio system HU-450, use the
REV button. A randomly selected track is
chosen from a randomly selected disc. Then a
new track is selected in the same way. “RND”
(random) is displayed as long as the function is
activated.
NOTE! If the quality of the CD does not comply
with the standard EN60908, or if it has been
recorded using poor equipment, sound quality
may be poor or playback interrupted.
3903125m
3901873d
3905010m
181
Internal CD changer HU-850
Selecting disc number
Turn the PRESET/CD knob. The disc and track
numbers are shown on the display.
Fast forward
Press and hold or to search within a
track or the entire disc.The search continues as
long as the button is depressed.
Changing tracks
Press or to come to the previous or next
track. The track number is shown on the
display. The steering wheel keypad can also be
used for this.
Scanning
Scan plays the first ten seconds of each track.
Press the SCAN or EXIT button when you
find a song or track you wish to listen to.
Random
Press RND to connect the random function.
A randomly selected track is chosen from a
randomly selected disc. Then a new track is
selected in the same way. “RND” (random) is
displayed as long as the function is activated.
NOTE! If the quality of the CD does not comply
with the standard EN60908, or if it has been
recorded using poor equipment, sound quality
may be poor or playback interrupted.
Internal CD changer
HU-850 contains an internal 6-disc CD
changer.
Press the CD shortcut key or turn the SOUR-
CE knob to activate the CD player. The CD
player resumes with the most recently played
track of the most recently played CD. Up to 6
discs can be inserted in the CD player. An
empty slot in the player must be selected when
inserting a disc.This is done by turning the
PRESET/CD knob. Make sure ”LOAD DISC”
is displayed before inserting a new disc.
CD eject
If you press this button the CD stops and the
disc that was playing is ejected.
NOTE: For traffic safety reasons you have
twelve seconds to handle the ejected CD.
Otherwise, the CD is drawn back into the
player and resumes with the most recently
played track.
IMPORTANT!
Use only standard 12 cm CDs - no smaller.
Do not use CDs with a sticker label.
Heat from the CD player could cause the
label to let loose from the disc,
possibly damaging the CD player.
3901862d
3901873d
3905010m
182
Dolby Surround Pro Logic II HU-850
Dolby Surround Pro Logic II
Mode
To select Dolby Surround Pro Logic II Mode,
press “ PL II”. “ PL II” is shown on the
display. “Dolby Pro Logic” is displayed. Press
OFF to return to 2-channel stereo.
Dolby Surround Pro Logic II
Dolby Surround Pro Logic II is a further refi-
nement of the previous system and provides a
significantly improved sound experience. This
improvement is especially noticeable to rear
seat passengers.
Dolby Surround Pro Logic II together with a
centre speaker in the dashboard offers a sound
experience very close to being there.
The normal left-right stereo channels are
divided into left-centre-right. In addition,
surround sound is produced by the rear
speakers. Dolby Surround Pro Logic II works
in CD mode. 3-channel stereo (3-CH) is
recommended for AM and FM radio transmis-
sions.
3-channel stereo
To select 3-channel stereo press “3-CH”.
“3-CH” is displayed. Press OFF to return
to 2-channel stereo.
3901877d
3905088d
183
Centre loudspeaker volume
Set the centre loudspeaker volume by pressing
out the button and turning it left or right. In
the centre position the volume is “normalised”
Press the button back after setting.
Rear loudspeaker output
level (surround sound)
Set the power output of the rear channels by
pressing out the button, pulling it further out
and turning it left or right. In the centre position
the power output is “normalised”. Press the
button back after setting. The control regulates
the surround sound level when listening in
Dolby Surround Pro Logic II mode.
Dolby Surround Pro Logic II HU-850
3902419d
3902419d
184
Technical data - Audio
Alarm
“Alarm!” is shown in the radio display when an alarm message is
transmitted. The function is used to warn the driver of serious
accidents or catastrophes, such as collapsed bridges, earthquakes or
nuclear accidents.
Dolby Noise Reduction is manufactured under license of Dolby
Laboratories Licensing Corporation. Dolby and the double D
symbol
are trademarks of Dolby Laboratories Licensing
Corporation.
HU-450
Output: 4 x 25 W
Impedance: 4 Ohm
Voltage required: 12 V, negative ground
Radio
Frequency: U (FM) 87.5 - 108 MHz
M (AM) 522 - 1611 kHz
L (AM) 153 - 279 kHz
HU-650
Output: 4 x 25 W
Impedance: 4 Ohm
Voltage required: 12 V, negative ground
External amplifier: 4 x 50 W or 4 x 75 W (option)
Radio
Frequency: U (FM) 87.5 - 108 MHz
M (AM) 522 - 1611 kHz
L (AM) 153 - 279 kHz
Bass speaker
Built-in amplifier: 150 W
HU-850
Output: 1 x 25 W (Centre speaker)
Impedance: 4 Ohm
Voltage required: 12 V, negative ground
External amplifier: 4 x 50 W or 4 x 75 W (option)
HU-850 must be connected to an external amplifier.
Radio
Frequency: U (FM) 87.5 - 108 MHz
M (AM) 522 - 1611 kHz
L (AM) 153 - 279 kHz
Dolby Surround Pro Logic II is a registered trademark of Dolby
Laboratories Licensing Corporation. Manufacturing rights for Dolby
Pro Logic Surround System are licensed from Dolby Laboratories
Licensing Corporation.
Low battery voltage
If battery voltage is low, a text appears in the combined instrument
panel display. The energy economy function of the car may switch off
the radio.Charge the battery by starting the engine.
185
Telephone (option)
Telephone system 186
Operating 188
Call options 189
Memory functions 192
Menu functions 193
Miscellaneous information 197
186
Telephone
General rules
· Put traffic safety first! If you as the
driver must use the privacy handset
in the armrest, park the car in a safe
place.
· Switch off the telephone when
refuelling.
· Switch off the telephone in areas
where blasting work is being carried
out.
· Only allow authorised personnel
service your telephone.
5. SIM card
All telephone functions can be controlled via
the keypad in the centre console. The majority
of telephone functions can be controlled via the
steering wheel keypad. The SIM card is
inserted below the keypad in the centre console.
Switch off the telephone whenever a SIM card
is not in use. Otherwise, messages from other
functions cannot be shown on the display.
6. Microphone
The microphone is built into the rearview
mirror.
7. Speaker
The speaker is integrated in the driver’s seat
head restraint.
8. Antenna
The antenna is mounted against the windscreen
in front of the rearview mirror.
1. Keypad in centre console
All telephones system functions can be
controlled from the keypad in the centre
console.
2. Steering wheel keypad
The keypad in the steering wheel can be used
for most telephones system functions.
When the telephone is activated, the keypad in
the steering wheel can only be used for telephone
functions. When in active mode, telephone
information is always shown in the display.
To use the buttons for radio settings, the
telephone has to be deactivated, see page 188.
3. Display
The display shows menu functions, messages,
telephone numbers, etc.
4. Privacy handset
The privacy handset can be used for private
conversations when you do not wish to be
disturbed.
Emergency calls
Emergency calls to emergency services
can be made without the ignition key or
the SIM card.
· Press the ON/OFF button.
· Ring the emergency number that
applies to your region
(within EU: 112).
· Press the green button
.
Telephone system
187
Telephone
3903012m
5
7
4
6
8
3
1
2
188
Telephone
Active mode
The telephone must be in active mode to use its
functions (does not apply to receiving calls).
Activate the telephone by pressing
on the
centre console keypad or the keypad in the
steering wheel.
When in active mode, telephone information is
always shown in the display.
Press
to deactivate the telephone.
Switching the telephone on and off
To switch the telephone on: turn the ignition key
to position I. Press the button marked in the
illustration
To switch the telephone off: press the same
button for approx. 3 seconds. If you switch off
the car while the telephone is on, it will be on
the next time you switch on the ignition.
Telephone calls cannot be received if the
telephone is switched off.
Operating
3903019m
3903022
m
SIM card
The telephone can only be used in conjunction
with a valid SIM card (Suscriber Identity
Module). Obtain the card from your service
provider.
Always insert the SIM card to use the
telephone. The name of your service provider
will then be displayed.
Switch off the telephone whenever a SIM card
is not in use. Otherwise, message from other
functions cannot be shown on the display and
the keypad cannot be used to control the radio.
3902219d
189
Telephone
Making and receiving calls
To place a call: enter the number and press
on the steering wheel or centre console keypad
(or lift up the handset).
To receive an incoming call: Press the button
(or lift the privacy handset). You can also use
Automatic answer, see menu function 4.3.
The audio system is automatically muted during
conversation. See menu alternative 5.6.5
regarding audio system volume.
Ending a call
To conclude a call, press on the steering
wheel or centre console keypad or put the
handset back in place. The audio system will
resume its previous activity.
Call options
Display
The display shows the current function, such as
menu alternative, message, telephone number,
or setting.
3800670d
3902219d
3902220d
190
Telephone
Privacy handset
If you wish to talk undisturbed, use the privacy
handset.
1. Pick up the handset. Enter the chosen
number on the centre console keypad.
Press
to place a call. Adjust the
volume by using the knob on the side of
the handset.
2. The call is terminated when you replace
the handset in its holder. If you wish to
change to handsfree without ending the call:
press
and select Handsfree. Press
and put down the handset, see the following
page.
Speed dial
Storing speed dial numbers
A number stored in the telephone book can be
linked to a speed dial button (0-9) as follows:
1. Go into active mode. Scroll with
to
Edit memory (Menu 3) and press .
2. Scroll to Speed dial (Menu 3.4) and
press
.
3. Choose the digit that is to be the speed dial
number. Press
to confirm.
4. Find the desired name or telephone number
in the memory and press
to select it.
Using speed dial
Press the desired speed dial button for about
2 seconds to make a call.
NOTE! When you turn on the telephone, wait
a moment before using the speed dial function.
To enter a speed dial number, Menu 4.5 must
be activated, see page 196.
Call options (cont.)
3902215d
Last number called
The telephone automatically stores the last
telephone numbers/names called.
1. Press
on the steering wheel or centre
console keypad.
2. Use the arrows to scroll forward
or
backward through the last numbers
called.
3. Press
(or lift the privacy handset) to
make the call.
3902219d
191
Telephone
Functions during a call
The following functions are available during
a call (scroll with arrows):
Secret mode/ Secret mode
Secret mode off
Hold/No hold Choose if the present
call is to be parked, i.e.
put on hold
Handset/
Handsfree Use the handset or
handsfree
Memory Show stored numbers
The following functions are available when you
have a current call and a parked call (scroll
with arrows):
Secret mode/ Secret mode
Secret mode off
Handset/
Handsfree Use the handset or
handsfree
Memory Show stored numbers
Three-way calling Speak with both parties
simultaneously
(conference call)
Switch Switch between the two
calls
Volume
Increase volume by pressing on the (+) button
on the steering wheel keypad. Reduce volume
by pressing on the (-) button.
When the telephone has been activated, the
steering wheel keypad can only be used for
telephone functions.
To use this keypad for radio settings the
telephone has to be deactivated, see page 188.
The following functions are available during
three-way calling (scroll with arrows):
Secret mode/ Secret mode
Secret mode off
Handset/
Handsfree Use the handset or
handsfree
Memory Show stored numbers
Call waiting
If you hear a beep in your receiver followed
immediately by two beeps (double beep) during
a phone call, someone else is calling.
The double beep is then repeated until you
either answer or the caller hangs up.
In this mode, you can choose to either take the
call or ignore it.
If you do not wish to take the call, press
or do nothing.
If you do wish to take the call, press
.
Your current call will be put in “park mode”.
If you press
, both calls will be terminated.
SMS
A double beep informs you that a SMS-
message has been received.
3902223d
192
Telephone
Calling from the memory
1. Press .
2. Choose from the following alternatives:
· Press and scroll with the arrows
until you find the desired name.
· Press the key of the first letter in the
name (or enter the name) and press .
3. Press
to call the selected number.
Memory functions
Telephone numbers and names can be stored
in either the telephone memory or the SIM card
memory.
If the number of the person calling is in the
memory, their name is shown in the display.
Up to 255 names can be stored in the telephone
memory.
Storing telephone
numbers with names
1. Press and scroll to Edit memory
(Menu 3) and press
.
2. Scroll to Enter item in memory (Menu 3.1)
and press .
3. Enter a number and press
.
4. Enter a name and press .
5. Choose in which memory to save with
and press .
space 1- ? ! , . : ’ ( )
a b c 2 ä å à á â æ ç
d e f 3 è é ë ê
g h i 4 ì í î ï
j k l 5
m n o 6 ñ ö ò ó Ø
p q r s 7 ß
t u v 8 ü ù ú û
w x y z 9
if you enter two letters in a row from
the same button, press * between them
or wait a few seconds
+ 0 @ * # & $ £ / %
change between capital and lower case
letters
delete the last letter or number entered.
If you press the button for a long time,
the entered number or text is deleted.
Enter a name (or message)
Press the button with the desired character:
once for the first character, twice for the
second, etc. Press 1 to enter a space.
3902221d
193
Telephone
Menu functions
The menu function is used to check and alter
settings and programme new functions in your
system. The different menus are shown in the
display.
Menu function
Go into active mode. Press to come to the
menu function.
The following applies in the menu function:
· A long press on means you exit the
menu function.
· A short press on means that you retract,
cancel or reject an alternative.
· A press on means that you confirm or
select, or that you scroll from a submenu
to the next submenu.
· The right arrow leads to the next side
menu. The left arrow leads to the
previous side menu.
Traffic safety
For reasons of safety, the menu system cannot
be accessed at speeds in excess of 8 km/h
(5 mph). You may only complete activities in
the menu system that have already been started.
The speed limiter can be disconnected using
menu function 5.7.
Shortcuts
When you use the right arrow to enter the
menu system, you can use numbers instead of
the arrows and the green button
to select the
right menu on the main menu level (1, 2, 3,
etc.), first submenu level (1.1, 2.1, 3.1, etc.)
and the second submenu level (1.1.1, 2.1.1,
etc.). The numbers are shown in the display
together with the menu alternative.
3902222d
194
Telephone
Main menus/submenus
1. Call register
1.1 Missed calls
1.2 Received calls
1.3 Dialled calls
1.4 Erase list
1.4.1 All
1.4.2 Missed
1.4.3 Received
1.4.4 Dialled
1.5 Call duration
1.5.1 Last call
1.5.2 Number of calls
1.5.3 Total time
1.5.4 Clear
2. Messages
2.1 Read
2.2 Write
2.3 Voice message
2.4 Settings
2.4.1 SMSC number
2.4.2 Validity
2.4.3 Type
3. Edit memory
3.1 Enter item
3.2 Search
3.2.1 Edit
3.2.2 Erase
3.2.3 Copy
3.2.4 Move
3.3 Copy all
3.3.1 SIM to phone
3.3.2 Phone to SIM
3.4 Speed dial
3.5 Empty SIM
3.6 Empty memory
3.7 Status
4. Call options
4.1 Transmit numbers
4.2 Call waiting
4.3 Automatic answer
4.4 Automatic dial
4.5 Speed dial
4.6 Call divert service
4.6.1 All calls
4.6.2 When busy
4.6.3 When not answered
4.6.4 If unreachable
4.6.5 Fax calls
4.6.6 Computer calls
4.6.7 Cancel all diverts
5. Settings
5.1 Factory settings
5.2 Network selection
5.3 Language
5.3.1 English UK
5.3.2 English US
5.3.3 Svenska
5.3.4 Dansk
5.3.5 Suomi
5.3.6 Deutsch
5.3.7 Nederlands
5.3.8 Français FR
5.3.9 Français CAN
5.3.10 Italiano
5.3.11 Español
5.3.12 Português P
5.3.13 Português BR
5.4 SIM security
5.4.1 On
5.4.2 Off
5.4.3 AUTO
5.5 Change codes
5.5.1 PIN code
5.5.2 Telephone code
5.6 Volume
5.6.1 Ringer volume
5.6.2 Ringer tone
5.6.3 Button click
5.6.4 Speed volume
5.6.5 Radio Auto Suppression
5.7 Traffic safety
195
Telephone
Menu 1. Call register
1.1 Missed calls: A list of missed calls is
shown here. You can choose to call, erase or
store the number in the telephone or SIM card
memory for later use.
1.2 Received calls: A list of received calls is
shown here. You can choose to call, erase, or
store the number in the telephone or SIM card
memory for later use.
1.3 Dialled calls: A list of dialled numbers is
shown here. You can choose to call, erase, or
store the number in the telephone or SIM card
memory for later use.
1.4 Erase list: This option can be used to
erase the list of menus 1.1, 1.2 and 1.3 as
follows.
1.4.1 All
1.4.2 Missed
1.4.3 Received
1.4.4 Dialled
1.5 Call duration: Here you can see the
duration of all your calls or the most recent.
You can also choose to see the number of calls
and clear the call timer.
1.5.1 Last call
1.5.2 Number
1.5.3 Total time
1.5.4 Clear timer
The telephone code is needed to clear the call
timer (see Menu 5.5).
Menu 3. Edit memory
3.1 Enter item: You can store names and
telephone numbers in the telephone or SIM
card memory. See the section on memory
functions for more information.
3.2 Search: Changes in the memory can be
made here.
3.2.1 Edit: Change data in the different
memories.
3.2.2 Erase: Remove a saved name.
3.2.3 Copy: Copy a saved name.
3.2.4 Move: Transfer information between
the memory of the telephone and the SIM
card.
3.3 Copy all: Copy the telephone numbers and
names on the SIM card to the telephone's
memory.
3.3.1 From SIM to telephone memory
3.3.2 From Telephone to SIM memory
3.4 Speed dial: A number stored in the
telephone book can be stored as a speed dial
number.
3.5 Empty SIM: The entire memory of the
SIM card can be erased.
3.6 Empty memory: The entire memory of the
phone can be erased.
3.7 Status: See how many places in the SIM
card or telephone memory are occupied by
names and numbers.
Menu 2. Messages
2.1 Read: Here you can read received text
messages. You can then choose to erase the
last message, forward it, change or save the
entire message or parts of it.
2.2 Write: Using the keypad, you can write a
text message. Then choose to save or send it.
2.3 Voice massage: Listen to received
messages.
2.4 Settings: Enter the number (SMSC
number) of the message centre you wish to
have transfer your messages. Specify also how
the message is to reach the addressee and how
long it is to be stored in the message centre.
2.4.1 SMSC number
2.4.2 Validity
2.4.3 Type
Contact your service provider for information
about these settings and the SMSC number.
196
Telephone
Menu 4. Call options
4.1 Transmit number: Choose whether or not
to display your number to the person you call.
Contact your service provider for a permanently
concealed number.
4.2 Call waiting: Choose whether or not you
want to be alerted during a phone call that there
is another call coming in.
4.3 Automatic answer: Chose to answer
without using the keypad.
4.4 Automatic redial: Choose to call a
previously dialled number that was busy.
4.5 Speed dial: Here you set whether or not
speed dial is to be activated. In order to use
speed dial, the function must be activated
4.6 Call divert service: Here you can choose
when and what type of calls are to be diverted
to a specified telephone number.
4.6.1 All calls (this setting only applies
during the current call).
4.6.2 When busy
4.6.3 When not answered
4.6.4 If unreachable
4.6.5 Fax calls
4.6.6 Computer calls
4.6.7 Cancel all diverts
Menu 5. Settings
5.1 Factory settings: Function to return to
the system’s factory settings.
5.2 Network selection: Choose a network
automatically or manually.
5.2.1 Auto
5.2.2 Manual
5.3 Language: Here you can choose which
language the telephone is to display.
5.3.1 English UK
5.3.2 English US
5.3.3 Svenska
5.3.4 Dansk
5.3.5 Suomi
5.3.6 Deutsch
5.3.7 Nederlands
5.3.8 Français FR
5.3.9 Français CAN
5.3.10 Italiano
5.3.11 Español
5.3.12 Português P
5.3.13 Português BR
5.4 SIM security: Choose if the PIN code is to
be on, off, or automatic.
5.4.1 On
5.4.2 Off
5.4.3 Auto
5.5 Change codes: Change the PIN code or
telephone code.
5.5.1 PIN code
5.5.2 Telephone code (use 1234 before
you change to a personal code).
The telephone code is used to clear
the call timer.
NOTE! Make a note of the code and store it in
a safe place.
5.6 Volume
5.6.1 Ringer volume: Here you can
choose the volume of the ringer for
incoming calls.
5.6.2 Ringer tone: There are eight
different ringer tones to choose
from.
5.6.3 Button click: On or off
5.6.4 Speed volume: Choose whether the
volume should be adjusted
according to speed.
5.6.5 Radio Auto Suppression: Here you
choose whether the volume of the
radio should remain the same during
telephone calls.
5.6.6 New SMS: Choose whether you
want the telephone to signal an
incoming SMS or not.
5.7 Traffic safety: Here you can choose to
disengage the speed limiter for the menu
system, i.e. choose to use the menu system
even while driving.
197
Telephone
Specifications
Output 2W
SIM card small
Memory positions 255*
SMS (Short Message Service) Yes
Computer/Fax No
Dual band Yes
(900/1800)
* 255 memory positions in the telephone
memory. The number of memory positions on
the SIM card varies depending on your
subscription.
IMEI number
To block the telephone, inform the service
provider of the telephone IMEI number. This is
a 15 digit serial number programmed in the
telephone. Dial *#06# to display this number.
Write down the number and store it in a safe
place.
Double SIM card
Many service providers offer double SIM cards,
one for the car and a second one for another
telephone. Double SIM cards give you the
same number for two separate telephones. Ask
your service provider about the possibilities and
offers available regarding double SIM cards.
Radio - Telephone
The four lowest buttons in the steering wheel
keypad are for both radio and telephone.
If you wish to control telephone functions with
these buttons, you must first activate the
telephone; see page 188. If you wish to adjust
the radio settings with these buttons, exit the
telephone active mode. Press
.
Miscellaneous information
3903022
m
3902239d
198
199
AW5 (automatic gearbox) ..................... 88
Average fuel consumption .................... 38
Axle load .............................................155
B
Battery (jump start) ............................... 95
Battery care ................................ 149, 150
Battery .................................................142
Beam length control ............................. 40
Bird droppings ....................................138
Bonnet .................................................143
Booster battery ...................................... 95
Booster cushion .................................... 26
Brake fluid ..........................................148
Brake system ...................................22, 23
Bulbs ...................................................164
C
Call options.........................................189
Car washes ...........................................139
Cargo compartment .............................. 69
Cassette player ....................................178
CD changer .........................................180
CD player ................................... 179, 181
Changing bulbs .................................. 129
Changing wheels ................................114
Child seat and airbag ............................ 16
Children in the car -
seating locations ................................... 25
Alphabetical index
A
ABS ....................................................... 22
AC .......................................................... 58
Activating the alarm ............................. 79
Active mode ........................................188
Actual temperature - ECC..................... 53
Actual temperature................................ 53
Air distribution ..................................... 52
Air distribution ..................................... 59
Air quality sensor .................................. 55
Air vents ................................................52
Airbag - passenger side ......................... 16
Alarm ...................................................184
Alarm ..................................................... 79
Anti-lock brakes (ABS)......................... 23
Approach lighting ................................ 77
Audio system ......................................165
AUTO DOWN ........................................46
AUTO UP ............................................... 46
AUTO..................................................... 56
Autodim ................................................ 47
Automatic gearbox AW5 ................88, 89
Automatic gearbox with manual
speeds ..............................................90, 91
Automatic relocking ............................. 76
Cigarette lighter socket ........................ 45
Cleaning the seat belts .......................139
Cleaning the upholstery .....................139
Climate control with
air conditioning (AC)............................ 58
Coat hanger ........................................... 71
Colour code.........................................137
Combined instrument panel .................30
Cruise control........................................ 39
Current fuel consumption..................... 38
D
D Drive .................................................. 88
Dashboard - LHD .................................... 2
Dashboard - RHD .................................... 3
Deactivating deadlocks ........................ 77
Deactivating the alarm .........................79
Deadlocks .............................................. 77
Defroster .......................................... 56, 57
Diesel fuel filter ..................................145
Diesel ...................................... 43, 84, 145
Dimensions and weights .....................155
Dipped beam ......................................... 40
Direct start of heater .............................. 61
Direction indicators .............................. 41
Dolby Pro Logic Surround Sound ......171
Door mirror defroster ............................ 44
Double SIM card .................................197
Drive position .................................43, 88
Index
200
Instrument lighting ............................... 40
Interior - LHD .......................................... 4
Interior - RHD.......................................... 5
Interior lighting .................................... 67
Isofix mounting system for
child seats .............................................. 27
J
Jack ............................................... 70, 115
Jumpstarting .......................................... 95
Keys .......................................................74
Kick-down ............................................. 86
L Low gear ............................................ 88
Lifting the car......................................142
Load carrier .........................................102
Load curtain in cargo compartment ..... 69
Location of children in the car ............. 28
Locking and unlocking ........................ 75
Long load .............................................. 72
Lowering the backrest, rear .................. 72
Lowering the front passenger seat ........ 65
M
Main beam ”flash” ................................ 41
Main/dipped beam switch .................... 41
Manual child safety locks .................... 78
Manual climate control with air
conditioning (AC) ...........................51, 58
Manual gearbox .................................... 87
Driving with trailer ...............................96
DSTC ..................................................... 33
E
ECC ....................................................... 54
Electric cooling fan ................... 143, 144
Electric socket....................................... 45
Electronic Climate Control (ECC) ....... 54
Emergency calls ..................................186
Emergency puncture repair kit ...........116
Emergency stop .................................... 66
Engine - Specifications.............. 156, 157
Engine compartment ................. 143, 144
Engine oil ............................................146
Engine type designation ....................154
Environmental care ...................... 53, 142
Exterior .................................................... 6
F
Fan .........................................................58
Fault in emission control system.......... 34
Fault in SRS .......................................... 34
FIX NEXT SERVICE ............................ 35
Floor support ......................................... 70
Follow-me-home lighting..................... 77
Frequency update ...............................176
Front fog lamps ..................................... 40
Front seats ............................................. 64
Fuel filler flap........................................ 84
Fuel gauge ............................................. 30
Function selector .................................. 59
G
Gearbox type designation ..................154
Geartronic .............................................. 89
General lighting .................................... 67
Generator not charging ......................... 34
H
Handbrake ............................................. 45
Hazard warning flashers ........................ 44
Headlamp washer ..................................42
Headlamps ............................................. 40
Head restraints, rear ............................... 65
Heated front seats .................................. 44
Heating/Cooling ...................................58
HU-403 ................................................165
HU-603 ................................................167
HU-803 ................................................168
I
IC system (Inflatable Curtain) ..............19
Ignition switch and steering
wheel lock ............................................. 43
Immobilizer .....................................74, 86
Important tips - Children in the car ...... 25
Indicator and warning lamps ................ 31
Indicator and warning symbols ...... 32, 34
Index
201
Master key ............................................. 74
Minor stone chips and scratches ........ 137
Mirrors ................................................... 47
Misting on window interiors ................ 53
Mounting system for child seats
(Isofix) ................................................... 27
Mounting .............................................. 70
Multifilter.............................................. 55
N
N Neutral ............................................... 88
O
Oil pressure ........................................... 34
Open boot lid ........................................ 90
Opening the fuel filler flap ................... 84
P
P Parking ............................................... 88
Paintwork damage ..............................137
Paintwork ............................................ 137
Parking brake engaged ......................... 34
Parking brake ........................................ 45
Parking lamps........................................ 40
Parking lamps........................................ 40
Petrol ...................................................162
Polishing and waxing ......................... 139
Pollen filter ........................................... 53
Power seat .............................................. 66
Power steering .....................................148
Power sunroof........................................ 48
Power windows ..................................... 46
Puncture, temporary repair .................116
R
R Reverse .............................................. 88
Radio ...................................................165
Raising the booster cushion ................. 26
Range to empty fuel tank ..................... 38
Reading lamps, front and rear .............. 67
Rear fog lamp ........................................34
Rear fog lamp ........................................40
Rear seat head restraints ....................... 65
Rear window defroster .......................... 44
Rearview and door mirrors ................... 47
Rearview mirror .................................... 47
Recirculation ........................................57
Recovery ............................................... 94
Refuelling ............................................. 84
Remote control ..................................... 66
Replacing remote control batteries ...... 76
Rheostat for instrument lighting .......... 40
Roof load.............................................155
Rustproofing .......................................136
S
Seat belts and belt tensioners ............... 12
Seat belts ............................................... 10
Seat setting ............................................ 64
SEE MANUAL ...................................... 35
Service key ............................................ 74
SERVICE REQUIRED .......................... 35
SERVICE URGENT .............................. 35
SIM card ..............................................188
SIPS airbag system ................................ 13
SIPS airbag ............................................ 11
Ski hatch ...............................................72
Slippery road surfaces ........................... 85
Spare wheel .................................. 70, 113
Spare wheel ”Temporary Spare” .........113
SRS (airbags) .........................................11
Start position ......................................... 43
Starting the engine..........................84, 86
Steering wheel adjustment ................... 41
STOP SAFELY ASAP ............................ 35
Storage compartments in the
centre console ....................................... 69
Storage................................................... 68
Suitable detergent ...............................138
Sun blind ............................................... 49
Sunroof .................................................. 48
Switches in the centre console ............. 36
Symbols ...............................................149
T
Telephone system ...............................186
Temperature selector .......................56, 68
Index
202
Temperature .......................................... 56
Temporary puncture repair .................113
”Temporary Spare”..............................113
Tool kit with towing eye ...................... 70
Tools ...................................................... 70
Total weight ........................................155
Towbar ................................................... 98
Towbar - detachable (mounting) ........100
Towbar - detachable (removal) ...........101
Towing equipment ..........................98, 99
Towing eye ............................................ 94
Towing................................................... 94
Traffic safety .......................................193
Trailer indicator lamp ........................... 34
Trailer weight ......................................155
Trailer .................................................... 97
Train weight ........................................155
Trip computer........................................ 38
Type designations ...............................154
Tyres ....................................................110
Tyre dimensions ..................................110
Tyre, direction of rotation...................113
Tyre, driving characteristics ............... 112
Tyre, fitting .........................................115
Tyre, air pressure .................................112
Tyre, removing ....................................114
Tyre, tread wear indicators..................113
Index
U
Unlocking boot lid with master key ....76
V
Vanity mirror ......................................... 67
Ventilation ............................................ 51
VIN ......................................................154
Volvo integrated booster cushion ........ 26
Volvo Service Programme...................141
W
Warning - fault in ABS system ............. 32
Warning - fault in brake system............ 32
Warning symbol in centre of
dashboard ..............................................31
Warning triangle .......................... 70, 114
Washer fluid ........................................148
Washing ...............................................138
Wheels and tyres .................................109
Wheels .................................................110
WHIPS ................................................... 20
Windscreen washer................................ 42
Windscreen wipers ................................ 42
Winter tyres .........................................111
Wiper blades, replacement..................151
Y
Your climate control system -
useful hints ............................................53
203
Index
204
2005
S80
VOLVO
2005
TP 7528 (English). AT 0446. Printed in Sweden, Elanders Infologistics Väst AB, Mölnlycke 2004
TP 7528
VOLVO S80
O
W
N
E
R
'S
M
A
N
U
A
L
206

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Volvo S80 - 2005 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Volvo S80 - 2005 in de taal/talen: Engels als bijlage per email.

De handleiding is 4,88 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

Andere handleiding(en) van Volvo S80 - 2005

Volvo S80 - 2005 Gebruiksaanwijzing - Nederlands - 204 pagina's

Volvo S80 - 2005 Gebruiksaanwijzing - Deutsch - 204 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info