DISPLAYS AND VOICE CONTROL
}}
* Option/accessory.
87
Examples of trip computer information in the 12-inch
driver display*. The figure is schematic - parts may
vary depending on car model.
Examples of trip computer information in the 8-inch
driver display. The figure is schematic - parts may
vary depending on car model.
The following meters are included in the trip
computer:
•
Trip meter
•
Odometer
•
Instantaneous fuel consumption
•
Distance to empty tank
•
Tourist - alternative speedometer
Units for distance, speed, etc. can be changed
via system settings in the centre display.
Trip meter
There are two trip meters, TM and TA.
TM can be reset manually and TA is reset
automatically if the car is not used for at least
four hours.
The following information is registered while
driving:
•
Mileage
•
Driving time
•
Average speed
•
Average fuel consumption
The values apply from the trip meter's latest
reset.
Odometer
The odometer records the car's total mileage.
This value cannot be reset to zero.
Instantaneous fuel consumption
This gauge shows the fuel consumption that
the car has at the moment. The value is upda-
ted approximately every second.
Distance to empty tank
The trip computer calculates the
remaining mileage with the fuel
available in the tank.
The calculation is based on the average fuel
consumption over the last 30 km (20 miles)
and the remaining drivable fuel quantity.
When the gauge shows "----", there is not
enough fuel left to be able to calculate the
remaining mileage. Refuel as soon as possible.
NOTE
There may be a slight deviation if the driv-
ing style has been changed.
An economic driving style generally results in a
longer driving distance.
Tourist - alternative speedometer
The alternative digital speedometer makes it
easier to drive in countries where speed limit
signs are in a different unit than that shown in
the car's instruments.
The digital speed is then shown in the oppo-
site unit to that shown in the analogue speed-
ometer. If the analogue speedometer is gradu-
ated in mph, the digital speedometer shows
the corresponding speed in km/h and vice
versa.
