MAINTENANCE AND SERVICE
378
Lamp replacement - number plate
lighting
The number plate lighting is located under the
boot lid handle.
1. Remove the screws with a screwdriver.
2. Carefully detach the whole bulb housing and
withdraw it.
3. Replace the bulb.
4. Refit the whole bulb housing and screw it
into place.
Related information
•
Lamps - specifications (p. 379)
Lamp replacement - lighting in
cargo area
The cargo area lighting is positioned on both
sides of the boot lid opening.
1. Insert a screwdriver and gently prize so that
the lamp housing comes loose.
2. Replace the bulb.
3. Check that the bulb illuminates and press
back the lamp housing.
Related information
•
Lamps - specifications (p. 379)
Lamp replacement - vanity mirror
lighting
The vanity mirror's lamps are fitted inside the
lamp lenses.
Removal of lamp lens
1. Insert a screwdriver under the lamp lens and
gently prize up the lug on the edge.
2. Carefully detach and lift aside the lamp lens.
3. Use needle-nose pliers to pull the bulb
straight out to the side and replace with a
new one. Note! - Do not squeeze the bulb
too hard with the pliers. Otherwise, the bulb
glass could then break.
Attaching the lamp lens
1. Refit the lamp lens.
2. Press it into place.
