122761
3
Verklein
Vergroot
Pagina terug
1/34
Pagina verder
UR 810 UNIVERSAL CONTROLLER
Vivanco GmbH, D-22926 Ahrensburg, E-Mail
: hotline@vivanco.de
, Helpline: +49 (0) 4102 231135 3
original remote control (e.g. POWER) until the
LED (e.g. DVD) on your UR 810 remote control
blinks twice, then lights up for 2 seconds and
then starts blinking again.That indicates that a
new function code, e.g. POWER, has been
learnt.
6 Repeat steps 4 to 5 to for capturing more
key functions. - If there is a learning(capturing)
problem, the LED blinks 4 times, lights up for 2
seconds and then will start blinking again.
Then start capturing the key function again at
step 4.
7 Press and release device key for exit of
learning mode. – The controller will exit the
learning mode automatically after about 30
seconds of inactivity.
Reset/deletion of all captured key functions
per device: press the right device selection
key, e.g. DVD, and then SET and 4 together in
order to delete all learnt functions. The
appropriate device key LED will flash twice for
confirmation.
Memory full indication: if the memory is full, a
LED blink 4 times and then the controller will
exit learnning mode.
Operation
You operate your appliances basically in
exactly the same way as if you were using the
original remote controls, except that you must
first press an appliance button (TV, DVD, etc.)
to control the required appliance. As the
symbols on the UR 810 could differ from those
on the original remote controls you may have
to try out all the buttons in order to find the
functions.
Special settings and functions
1. Assigning volume and mute
exclusively to one appliance (punch through
function: Press the appliance button of the
appliance that you always want to use for
volume control, e.g. DVB. To lock, press SET
and 5. To unlock, press SET and 6.
2. Device Selection Key Shift: In order
to change the function of a device selection
key, e.g. change device key AUX1 to a second
SAT device key proceed as follows:
a) Press SET hold it and then press the to be
changed device key, e.g. AUX1. Then release
both keys and the AUX1 light will be on.
b) Press SAT, the light goes off and you can
enter another SAT code for a second SAT or
DTT receiver under AUX1.
c) You can reset this function by pressing SET
and the modified device key (AUX1)
simultanously until the LED goes on. Then
release the keys and press the modified device
key (AUX1) again.
3. Locking and unlocking a set device
key: Press the appliance key of the appliance
that you always want to be locked. Preset code
not changeable. To lock, press SET and 7. To
unlock, press SET and 8.
4. Reset remote control to factory
settings: Press SET and 0 simultanously for
more then 3 seconds. A LED will flash twice
and all user settings will be deleted
Specifications
Batteries: 2x AAA batteries, R03, UM4
Range: max. 7 m
Not for 400 kHz equipment
2-year works guarantee
Should your UR 810 cease to work within 2
years of purchasing you will receive a free
replacement from VIVANCO. Exceptions:
missing codes, deliberate destruction and
normal wear and tear of the housing and
buttons.
(D) Bedienungsanleitung
Fernbedienung Vivanco UR 810 für fast alle
Fernseh-, Audio-, Video und anderen
infrarotsteuerbaren Geräte
Batterien einlegen
Bitte öffnen Sie die Batterieklappe an der
Geräterückseite, Klappe leicht nach
untenschieben, und legen Sie 2 Alkali-
Mikrozellenbatterien ein. Achten Sie auf die
angegebenen Polaritäten auf Batterien und im
Batteriefach (+=+), und schließen Sie das Fach
wieder vorsichtig. – Bitte achten Sie darauf,
immer einwandfreie Batterien zu verwenden.
Geräteanpassung
Um Ihre Geräte steuern zu können, müssen
Sie die Fernbedienung für Ihre Geräte
einstellen. Dazu gibt es zwei Möglichkeiten: die
direkte Steuerkodeeingabe und die
Kodesuche.
Wenn die UR 810 Sie nicht versteht, dann
blinkt sie 2 Mal und Sie können danach die
Eingabe wiederholen. Jede verstandene
Eingabe quittiert sie mit einem kurzen Blink
ihrer LED-Anzeigelampe.
Die direkte Steuerkodeeingabe mithilfe der
beigefügten Liste
Beispiel: Einstellung der Fernbedienung für ein
Panasonic-Fernsehgerät:
1. Aus der beigefügten Liste
entnehmen Sie z.B. den Panasonic-Code 153.
Bitte vergewissern Sie sich, dass Sie die
korrekte Liste für Fernseher (TV) gewählt
haben.
3

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Vivanco ur 810 bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Vivanco ur 810 in de taal/talen: Nederlands, Duits, Engels, Frans, Italiaans, Portugees, Spaans, Pools, Deens, Zweeds als bijlage per email.

De handleiding is 1,57 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info