667338
46
Verklein
Vergroot
Pagina terug
1/290
Pagina verder
0478 192 9807 C - EN
44
Observe the instructions on cleaning
the engine (see engine instruction
manual).
Remove grass residues from the
gearbox (by brushing off), remove any
other dirt from the gearbox.
Check the cooling ribs of the engine
and hydrostatic gearbox and clean if
necessary.
Maintenance operations after the first
10 operating hours (initial operation):
An inspection by your specialist dealer
is recommended.
VIKING recommends
VIKING specialist dealers.
Maintenance operations after every
25 operating hours:
Check the blade fastenings and
mowing blade wear limits.
Check the installation position of the
mowing blades (MT 5112 Z,
MT 6112 C, MT 6112 ZL, MT 6127 ZL).
Maintenance operations after every 50
operating hours:
Check the installation position of the
mowing deck. (Ö 15.14)
Maintenance operations after every 100
operating hours:
Replace the mowing blades.
Maintain the V-belt or toothed belt.
Inspection by a specialist dealer.
VIKING recommends VIKING specialist
dealers.
15.2 Cleaning the machine
Stop the engine. (Ö 13.3)
Engage the parking brake. (Ö 8.14)
Remove the ignition key and keep it in a
safe place.
Remove the mowing deck. (Ö 14.1)
First, remove accumulated clipping
deposits in the mowing deck housing
using a stick.
Clean the underside of the mowing
deck with water and a brush.
When cleaning the upper side of the
mowing deck, ensure that the V-belt
and toothed belt do not get wet – never
spray water into the openings in the
covers.
Clean the discharge chute using
running water and a brush when
removed and well away from the
machine.
Remove grass residues from the
mowing deck, the engine compartment
and the gearbox. Clean the cooling ribs
of the engine and gearbox.
Clean the mowing blades with water
and a brush – under no circumstances
should you hit the mowing blades (e.g.
with a hammer) to loosen dirt.
Remove the grass catcher box and
clean using running water and a brush
well away from the machine. (Ö 13.10)
15.3 Opening the engine hood
Hold the engine hood (1) with one hand at
the handle (2) and open by pulling gently
upwards.
Fold the engine hood (1) forwards to the
stop.
All required maintenance
operations on the brake system and
gearbox are carried out during the
inspection.
Avoid damage to the machine.
Never spray water (high pressure
cleaner) onto engine components,
seals, electrical components
(battery, wiring harness, etc.) and
bearing points. This may result in
damage and expensive repairs.
Do not use aggressive cleaning
agents. These cleaners can
damage plastics and metals,
impairing the safe operation of your
VIKING machine. If you are unable
to remove the dirt with water using
a brush or a cloth, VIKING
recommends the use of a special
cleaner (e.g. STIHL special
cleaner).
Always remove the mowing deck
for cleaning and maintenance
operations.
Danger of burns!
Allow the engine to cool down
before opening the engine hood.
46

Hulp nodig? Stel uw vraag in het forum

Spelregels

Misbruik melden

Gebruikershandleiding.com neemt misbruik van zijn services uitermate serieus. U kunt hieronder aangeven waarom deze vraag ongepast is. Wij controleren de vraag en zonodig wordt deze verwijderd.

Product:

Bijvoorbeeld antisemitische inhoud, racistische inhoud, of materiaal dat gewelddadige fysieke handelingen tot gevolg kan hebben.

Bijvoorbeeld een creditcardnummer, een persoonlijk identificatienummer, of een geheim adres. E-mailadressen en volledige namen worden niet als privégegevens beschouwd.

Spelregels forum

Om tot zinvolle vragen te komen hanteren wij de volgende spelregels:

Belangrijk! Als er een antwoord wordt gegeven op uw vraag, dan is het voor de gever van het antwoord nuttig om te weten als u er wel (of niet) mee geholpen bent! Wij vragen u dus ook te reageren op een antwoord.

Belangrijk! Antwoorden worden ook per e-mail naar abonnees gestuurd. Laat uw emailadres achter op deze site, zodat u op de hoogte blijft. U krijgt dan ook andere vragen en antwoorden te zien.

Abonneren

Abonneer u voor het ontvangen van emails voor uw Viking MT 6127ZL bij:


U ontvangt een email met instructies om u voor één of beide opties in te schrijven.


Ontvang uw handleiding per email

Vul uw emailadres in en ontvang de handleiding van Viking MT 6127ZL in de taal/talen: Engels, Portugees, Spaans als bijlage per email.

De handleiding is 24,74 mb groot.

 

U ontvangt de handleiding per email binnen enkele minuten. Als u geen email heeft ontvangen, dan heeft u waarschijnlijk een verkeerd emailadres ingevuld of is uw mailbox te vol. Daarnaast kan het zijn dat uw internetprovider een maximum heeft aan de grootte per email. Omdat hier een handleiding wordt meegestuurd, kan het voorkomen dat de email groter is dan toegestaan bij uw provider.

Stel vragen via chat aan uw handleiding

Stel uw vraag over deze PDF

loading

Andere handleiding(en) van Viking MT 6127ZL

Viking MT 6127ZL Gebruiksaanwijzing - Nederlands, Deutsch, Français, Italiano - 284 pagina's


Uw handleiding is per email verstuurd. Controleer uw email

Als u niet binnen een kwartier uw email met handleiding ontvangen heeft, kan het zijn dat u een verkeerd emailadres heeft ingevuld of dat uw emailprovider een maximum grootte per email heeft ingesteld die kleiner is dan de grootte van de handleiding.

Er is een email naar u verstuurd om uw inschrijving definitief te maken.

Controleer uw email en volg de aanwijzingen op om uw inschrijving definitief te maken

U heeft geen emailadres opgegeven

Als u de handleiding per email wilt ontvangen, vul dan een geldig emailadres in.

Uw vraag is op deze pagina toegevoegd

Wilt u een email ontvangen bij een antwoord en/of nieuwe vragen? Vul dan hier uw emailadres in.



Info